Urgent!!! Oracle 11.5.8 AP and GL Report Packages

Does anyone know where I can find Report Packages that provide sample reports for GL, AP and Fixed Assets? Please email me and let me know.
[email protected]
Thanks.

Dear Sam!
I know you are Guru. I want to learn Oracle Financial like GL , AP, AR setup or configuration. As you know I was able to install EBS11i on my PC and I also logged in as sysadmin but If you can little bit tell me that after login how I can go to GL , Please be specific that what responsibility I have to select right from beginning after login as sysadmin. If you please tell me some path like select this go next select this . I know it is little anoying but your help in this regard will be appreciated. Just guide us that this is the path to setup GL/AP/AR and from that I can find some way.

Similar Messages

Oracles tools to generate static and interactive reports

Hi,
What kind of oracle tools can generate statis and interactive reports, is there any free one, and where to get it?
Thanks.

user11017933 wrote:
Hi,
What kind of oracle tools can generate statis and interactive reports, is there any free one, and where to get it?
Thanks.
What type of reports you're looking? Performance report? you can use AWR but this is not free. You can use statspack instead
Hope this helps
Cheers

Oracle 9.2.0.5 and Crystal Reports 10

I'm using a Windows XP machine as my client operating system.
When trying to create a report with more than one table in Crystal. The section where I would "link" the tables together, "hangs"... I have to kill the whole application in order to get out of it...
Oracle 8 databases seem to work fine.
Has anybody else ran into this problem? Any more info would be greatly appreciated...
Thanks,
Marcia

Hi Marcia,
I don't know why the SQL painter would hang in Crystal 10. I have found it too awkward and limiting to use. I use stored procedures for the source data for each report. This gives you the power of PL/SQL and the potential for lots of code reuse to extract your result set for the report. For example:
create or replace procedure p_myreportdata
(< your input parameters if any would be here >
,rs_rpt_data out sys_refcursor)
as
begin
open rs_rpt_data for
select <column list>
from <tables>
where < your filter using input parameters here >;
end p_myreportdata;
Use the Databaes > Verify Database function in Crystal anytime the procedure changes to pick up or remove fields or parameters.
Hope that helps!

Oracle 9.2.0.8 and AWR report?

Does anyone know if 9.2.0.8 supports AWR?
Thanks in advance!

Thanks! I figured it may since I have also seen that it now support Automatic Memory Management, which was also introduced in 10g v1.
Thanks

URGENT: Need Applcore for OAF Jdeveloper - Oracle Apps 11.5.10 and R12

Hi
Please tell from where can I download the complete Jdeveloper Studio for Oracle Apps 11.5.10 and R12 which has Applcore.
We need this Oracle JDeveloper for Oracle Apps 11i and R12 development.
I downloaded Oracle Developer Suite10g (9.0.4.0.0) from :
http://www.oracle.com/technology/software/products/ids/htdocs/904winsoft.html
and
Oracle Developer Suite 10g (10.1.2.0.2) from
http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html
but neither of them is having Applcore for 11i and R12
Thanks
Rahul
Edited by: RahulD on Dec 2, 2008 2:53 PM

RahulD,
What you want is the OAF download (Oracle Application Framework). The only place to get this is on metalink; you will search based upon the specific version of apps that you have to find the appropriate "patch" to download.
John

URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

ERROR :
1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
3. Oracle9iASHttpService automatically stops after starting the service
Environment :
Windows 2000 Server
Oracle 9i 9.0.1.1.1
Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
and
Select count(object_name) from user_objects where object_type='JAVA CLASS';
which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

Oracle EBusiness suite professions tasks and duties

Hello everybody
I inquire about something regarding Oracle EBusiness suite professions tasks and duties. I've tasked by my manager with writing a report lists the main tasks and key responsibilities for each of the following technical professions within Oracle E Business Environment:
1)-Apps DBA.
2)-Apps Technical Consultant (Apps Developer)
3)-Apps Business Consultant.
I've contacted Oracle Support recently via opening SR .But, They informed me that they don’t provide such information and therefore, they suggest me weather to contact Oracle Consulting to post here.
I would appreciate your help.
Sami

I don't see how you'd be able to integrate OAM with EBS unless you have the oSSO (assuming of course that you're not on the bleeding edge, per 975182.1).
We are running the same configuration and have setup the redirects in OAM policy. We setup specific context roots for each application, then use OAM policy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)
Unique authorization rule for each redirect, then a unique "policy" on the "Policies" tab for each redirect. Each Policy maps to the respective Authorization Rule.

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Is it possible to boot oracle vm server over iSCSI and ipxe?

Hi,
Is it possible to boot oracle vm server over iSCSI and ipxe?
I have tried it, but got a kernel panic after the boot progress.
Can anyone tell me what should I do to install and or boot oracle vm server on and from a iscsi lun instead a local hard drive?
Thanks!
Redwan

959211 wrote:
Hi,
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
Thanks
Sambityes, possible; but minor challenge to manage dynamically
how to ensure that you actually use the flavor you desire?

Can i use "Oracle Database 12c: Performance Management and Tuning " training for getting certification on "Oracle Database 11g: Performance Tuning 1Z0-054"

i have taken "Oracle Database 12c: Performance Management and Tuning new" training from oracle university. Now i would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054" exam. Is it possible ?

I essentially endorse and refer you to Matthews' and John's post above.
I would differ with slightly with Matthew because my guess is you would often be able to use like for like 12c training for an 11g certification ( I believe there are precedents). BEFORE ANYONE ASKS THE OTHER WAY DOESN'T HAPPEN.
.... but totally concur with Matthew you would ill advised to procede on that basis without one of:
- This being advertised as possible on the website : e.g. https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=654&get_params=p_id:169 ... option 2 show courses.
- Confirmation from Brandye
- Confirmation from an Oracle Certification Support Web Ticket ( http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP )
... The more common (and in my opinion usually better) way would be get your 11g DBA OCP ( or higher first) and then take the 1z0-054. I am almost certain they will accept your 12c course for the 11g DBA OCP.
If you are choosing the route of not being a 11g (or 12c ) DBA OCP first but are on option 2 and relying on the course for certification then the issue is more in the balance and you are even more strongly advised to get confirmation before proceding (remember if the rules need to be changed for you only then any profit out of the exam is lost).
In general my understanding is Oracle would prefer to encourage people to train on the latest version of product that is available for training and will prefer to avoid restrictions which would cause you to train at a lower version. ( This is simply my guess at Oracle University Policy ... personal opinion only).
Having said all I have said I'd encourage you to go with the advice of the earlier two posts.

Oracle EBS 12.1.3 and SOA 10g hardware sizing

Hi All,
To give you the background, we have integration requirements where in one of the interface about 20000 sales orders come in the system everyday and they have about 3-5 lines per sales order. Most of these orders come between 3-6 PM. We have 50 other interfaces along with this but this is a major one. Client is concerned about performance and so we have to give right design and right hardware sizing so that the system is able to handle all the load without causing performance issues. We are planing to use Oracle EBS 12.1.3 and SOA Suite 10.1.3.5 (10g)
Any processes, documentation on how to go about hardware sizing, tools will be helpful
Thanks,
Rahul

Any Updates??

Oracle Application Server 10g Forms and Reports Services

Hi there,
I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
Oracle Application Server 10g Release 2 (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
or
Oracle Developer Suite 10g (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
Faoilean.

You might find better assistance in the APplication Server forum - Oracle Application Server - General

Oracle Workflow Manager, Agent Listener, and Java Mailer problem

Hi,
I am not sure this topic to this forum, since this might be installation issue.
But I am hitting a big wall.
I had Windows 2000 SP4.
I have already installed Oracle Database 10gR1, Oracle Developer 10gR2, and Oracle Workflow 2.6.3 Standalone previously.
Including :
- Oracle Workflow Server 2.6.3
- Oracle Workflow Builder 2.6.3.5
- Apache HTTP Server 9.0.4
- Workflow Middle Tier
Anything seems to right, including the Notification Mailer and the Business Event.
And I had also made backup of them surely.
Now,
I'd like to change into Oracle Database 10gR2 because :
1. Some errors I found when I tried to call a Report from Oracle Form.
Unable to connect to Report Server ...
I thought Oracle Database 10gR1 is not suitable for Oracle Developer 10gR2.
2. And in the OWF 2.6.3 Workflow Home Page, there was no Logout button (which I found in OWF 2.6.4)
I removed my previous installation including Oracle Workflow.
After strugglineg in the installation of Oracle Database 10gR2, now I am facing another problem with Oracle Workflow.
I succesfully installed Oracle Workflow 2.6.4 Server and Oracle Workflow Manager (standalone version),
and the Oracle Workflow Middle Tier.
After I launch Oracle Workflow Configuration Assisstant, everthing seems to be normal.
I succed to open the Oracle Workflow Home Page (and found the Logout button there)
Next, I tried to navigate to the Oracle Workflow Manager.
1. I start the OC4J_Workflow_Management_Container --> initialized
2. OC4J_Workflow_Component_Container
The following error line appeared in the OC4J command prompt
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String,
int) : Logging to System.out until necessary parameters are retrieved for Logger
to be properly started.
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
initializeStateMachine() : BEGIN [default implementation]
06/05/26 10:31:40 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
getNewWorkflowContext() : BEGIN
06/05/26 10:31:45 LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.
loadGlobalParameters() : BEGIN
06/05/26 10:31:48 oracle.apps.fnd.wf.common.ContextFactoryException: Unable to g
et connection from data source because the following Exception occurred -> java.
sql.SQLException: ORA-28000: the account is locked
06/05/26 10:33:57 Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)
initialized
3. finally it initialized
Next I tried to go to Oracle Workflow Manager from related link of Enterprise Manager
It is said that the OWF_MGR is locked
(I surprised since I had UNLOCKED the OWF_MGR after the installation and succeed to login at the Workflow Home Page)
And the following error line appeared in the commaned prompt after that
06/05/26 10:35:03 OrionCMTConnection not closed, check your code!
06/05/26 10:35:03 Logical connection not closed, check your code!
06/05/26 10:35:03 (Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
4. I re-UNLOCK the OWF_MGR and login to Oracle Workflow Manager
I noticed that the Agent Listener and Notification Service is Unavailable
(In OWF 2.6.3, The Agent Listener was started and Notification Service was waiting to be configured)
I tried to start one of the Agent Listener, but the following error appeared
ERROR: The Service Component Container is not running
Well, I had the same problem when installing the OWF 2.6.3
I tried to uninstall (remove) and re-install it like I had done before in OWF 2.6.3
(based on someone's post in Oracle's forum)
But this time, the re-installation won't fix this problem. (It was succeed in the OWF 2.6.3)
Everytime I start the OC4J, using wfmgrstart.bat and wfsvcstart.bat
the OWF_MGR is re-LOCKED(TIME) automatically.
And the servlet (WFALSNRSVC and WFMLRSVC) are not running.
I am worry, since I cannot use the Notification Mailer if this problem had not fixed yet.
(In OWF 2.6.3, the mailer was not available until those servlet is Started)
Sorry for the long post.
Any help would be grateful.
Many thanks,
Buntoro

Hi,
Finally, I have found the solution.
Step :
1. Start all of the Oracle Service, except for the OC4J
If you have already started OC4J, then stop them
Unlocked the <wf_manager_user>
2. Search in your Oracle Home : data-sources.xml
There should be two files,
one is in the ...\OC4J_Workflow_Component_Container\application-deployments\WFALSNRSVCApp
the other is in ...\OC4J_Workflow_Component_Container\application-deployments\WFMLRSVCApp
3. Make sure, you create back up of them.
4. Replace the following line
password="->pwForOwfMgr"
with
password="<your_wf_manager_password>",
should be look like this
password="a"
5. Now start the OC4J using wfmgrstart.bat and wfsvcstart.bat
6. Next, login to the Oracle Workflow Manager
This worked for me.
Hope this will help someone who has the same problem.
Buntoro

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal

sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

Oracle Open World in SanFrancisco and Oracle Spatial

Hi,
This week is Oracle Open World in San Francisco, and while usually we try to keep this message board strictly technical, I wanted to mention that there are some interesting things happening here.
There are a few sessions Wednesday in Room 2016 starting at 3:00 pm:
Data Management on a Budget with Oracle 10g: Exploring Strategies and Tactics with the U.S. Geological Survey
by Nate Booth and Harold House, USGS
Oracle Database 10g Spatial Performance and Manageability Best Practices and German Rail Case Study
by Dan Abugov (me) and Andreas Hoefler, Fichtner Consulting & IT AG
I'm excited to be talking about Partitioning Best Practices, and we'll be posting the white paper here on OTN.
Finally, please come and see us at booth E28 in the Oracle DemoGrounds (we have Locator/Spatial, MapViewer, and Workspace Manager here in the pod). If you are the FIRST person to mention reading this posting on OTN when you visit the booth, we'll be happy to give you a copy of "Pro Oracle Spatial", the first book devoted to developing applications using Oracle Spatial. The book was written by Ravi Kothuri, Albert Godfrind (two Oracle Spatial Developers) and Euro Beinat of Geodan NL. One of the authors (Albert Godfrind) is here, and if you ask I'd bet he'd autograph it for you!
We also have a very limited supply of the book we'll be giving out over the course of the conference.
Of course, everyone who stops by will get the Oracle Spatial mini CD which includes viewlets, white papers, and more.
The book is also available here:
http://www.amazon.com/exec/obidos/tg/detail/-/1590593839/qid=1102358585/sr=1-1/ref=sr_1_1/002-9450919-8639226?v=glance&s=books

Hello,
Take a look at this page, http://www.oracle.com/technology/events/oracle-openworld-2007/index.html
There are links here to the whole OOW (social network,twitter,blog/flicker)osphere I think the new buzzword being "Social Graph" that covers all that.
But anyway there are tons of ways for people to sign up and track the sessions and see who's going to go where, etc.
Regards,
Carl
blog : http://carlback.blogspot.com/
apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

Urgent!!! Oracle 11.5.8 AP and GL Report Packages

Similar Messages

Maybe you are looking for