Urgent::! Pager field in BP?

When I try to enter pager info into BP addresses tab (SAP GUI) in 5.0, I get a prompt to enter some kind of information about the service??
how do I get it to accept info as I want to add that field in the web ui
In trying to customize as well under UI configuration, I don't see the Pager field as an option. Has anyone had a similar problem. Pls help.

solved using bbp_change_badi and fm set context

Similar Messages

How to show header value in each page same as Page field value.

Hi there
It would be very helpful if anyone could tell us how to set header value based on the page field.
To make it more clear.. i have a field in my Rtf (which is basically a group by) so in each page it'll differ.. My Header should reflect the same as field value.
what my understanding is header wont change for each page. but ,my requirement is something like i have to show the header which is same as one of my filed value..
for eg:
HEADER: ABC page-1
Field - ABC
HEADER:XYZ page-2
Field - XYZ
Regards - Vijay
Edited by: Vijay Santhanam on 23-Oct-2008 3:51 PM

Hi Haiye ,
The Pointer you gave would keep Header ABC through out all the pages in report right, actually i had tried this and got same header for all pages,
but what i need is my first page Header should be based on one of the field of Page 1, second pge Header again based on the same field, but the value may differ... (coz the page field is group by ).
Would appreciate your help on this issue!!
Regards - Vijay

How to seperate current page fields in a pdf form using javascript

Hi,
Is that possible to seperate current page fields(textbox, Chesckbox) in a pdf form using javascript.
I have coding to get all the fields in a pdf form. But i want to take CURRENT PAGE alone.
Please help me out.
Thanks and regards,
Christy

Hi try67,
Thanks for your support.
I got the result.
Thanks and Regards,
Christy

Multiple Page Contents Page Fields In Custom Page Layout SP2013

I'm rather new so bare with me. I'm trying to add multiple page content page fields with snippets to a custom page layout html file in SP2013 Designer. Once I add the snippet and publish, I review the page and any text written
in the last created page content box saves for both page content boxes instead of saving unique text in both. How do you change the snippets to where they are unique snippets and won't be referenced as the same one?
Any help is greatly appreciated.
Thanks,
SP2013Newbie

ok thnaks a lot for the reply. in my form has 6 pages. so i want to copy only first page half page data ( content & fillble fileds) in to new pdf page. so is this possible ???

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

Problems when I copy a text from master page field to body page field

Hello
I am developing a electronic form and I have experimented a strange bebehavior.
When I try to copy a rawvalue of listbox field from master page to textbox field in body page, this works randomly.
I have this code in the validation of the master page field
--------------------begin code---------------------
if (this.rawValue != null && this.rawValue != "")
if (xfa.form.myform.mysubform.mytextfield.rawValue != this.rawvalue)
xfa.form.myform.mysubform.mytextfield.rawValue = this.rawValue;
--------------------end code---------------------
Somebody know what is wrong?
I am very confused.
Thanks a lot for your help.
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

Extra code is one of the pitfalls of using WYSIWYG cutting and pasting,
and using styling in general.
So while it may be interesting to try to reduce the amount of code, there
probably won't be any direct approach without extra steps to get you what
you want with bare bones code that appears as you want it to or at least acceptable.
I guess you might have to take a screen image, clip the relevant portion, since
you can only attach an image file here not a text file.
Posting a screen shot
* http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows

Where is the value of a SAP UI page Field stores?e.g. Priority

Hi All,
I am so confused about getting the value of a UI page field, e.g.Priority. I don't know how to obtain its value in a report. It isn't a field in CRMD_ORDERADM_H table.
Via set a breakpoint in one of class CL_CRM_UIU_BTADMINH_CN' method GET_PRIORITY and debug, I can find its value here in 'assign ME->CONTAINER_PROXY->DATA_REF->ATTRIBUTE_REF->* to <DATA>.'. But I don't know how to use it in my report.
Any one can help? Thank s very much!
Br,
Ivy

Hi Ivy,
You can find the priority in the table SCPRIOT.
If you want to get it from the UI, you can get it from the relation BTHeaderActivityExt
Refer the code:
DATA: ls_activity_h TYPE crmst_activityh_btil.
 lv_collection = lr_order->get_related_entities( iv_relation_name = 'BTOrderHeader' ).
 IF lv_collection IS BOUND AND lv_collection->size( ) GT 0.
 lr_adminh ?= lv_collection->get_current( ).
 ENDIF.
 CHECK lr_adminh IS BOUND.
* check if the leading object is activity or task
 CALL METHOD lr_adminh->if_bol_bo_property_access~get_properties
 IMPORTING
 es_attributes = ls_adminh.
 INCLUDE crm_object_types_con.
 IF ls_adminh-object_type EQ gc_object_type-businessactivity OR ls_adminh-object_type EQ gc_object_type-task.
* get the activity header extension
 CLEAR lv_collection.
 lv_collection = lr_adminh->get_related_entities(
 iv_relation_name = 'BTHeaderActivityExt' ).
 IF lv_collection IS BOUND AND lv_collection->size( ) GT 0.
 lr_activity_h = lv_collection->get_current( ).
 CHECK lr_activity_h IS BOUND.
* check if the activity or task is marked as private
 CALL METHOD lr_activity_h->get_properties
 IMPORTING
 es_attributes = ls_activity_h.
Regards,
Leon

Adding a Pager field in contact information in 5.2

When I try to enter pager info into BP addresses tab (SAP GUI) in 5.2, I get a prompt to enter some kind of information about the service??
how do I get it to accept info as I want to add that field in the web ui
In trying to customize as well under UI configuration, I don't see the Pager field as an option. Has anyone had a similar problem. Pls help.

Hello,
I have looked at wiki below [http://wiki.sdn.sap.com/wiki/display/CRM/Howtoaddanexistingfieldtoasearchpageofadifferent+component]
Kindly suggest ways to acheive adding new field in Opportunity Search ( employee responsible which is not the main contact like I mentioned ) which belongs to another component ...Can it be done without coding eg. adding to design layer.
Can you please give steps to do the same.
Thanks.
Regards,
Monica

Can I use SetFld during GenPrint for banner page fields?

I have a banner page form that has multiple variable fields on it to display information specific to the batch it's being included with (for out post-composition handling area). I currently set those fields' values by assigning variables of the same name (as the fields) within a DAL script called as my BachBannerBeginScript for that batch. The fields on the Banner page form/section have a rule of NOOPFUNC, so without that assign process happening during the DAL script, they inherently hold no value. This has worked fine so far.
Now I have a new banner page for a different process/batch, and it's purpose will be to be a "summary report" of sorts, detailing on the banner page high-level information about each document within that batch. I take information from the batch file (bch), read in an additional external file and aggregate the data in GVMs (to form an array, basically) during the BatchBannerBeginScript. The problem I now have is that I have a variable-sized array (based on the document-count within my batch file), yet my understanding is that I can't use functions available to me in GenData, so I have to basically pre-define as many instances of the section (if I do a report line per section) or field (if I do one section with all instances of the field on it) as I think are possible (max-case scenario, basically).
However, after I have my Section/Fields defined, I still need to use DAL scripting to populate those fields. I tried to use SetFld to populate them, but the values don't show up in my output, leading me to believe that function/rule doesn't work in GenPrint. Is there a better way to set all those fields than to explicitly assign each instance of a field? I'd rather have a short While loop that takes a GVM's instance and assigns it to a variable field name than have hundreds of assign statements where I explicitly assign each possible field.
Thanks,
Gregg

Aha. So you have an existing script that is executing somewhere to assign some other field during print. Depending upon what and when this script runs, you may be trying to set your banner fields too late. You see, as a default the banner page is temporary. Generally it is created, printed, then destroyed all before the first real page of your transaction prints. If you are not using the TransBannerBeginScript INI option as mentioned earlier, you might try to use that method to run your script which should be while the banner page is still alive.
There is another way that you could try to run your script on the given page using what is called a "print time" or "macro" field. This would involve creating one more field on your banner section and name it like this:
~DALRUN MyScript.DAL
Yes, you can name your script something other than MyScript.DAL. The key is the ~DALRUN at the start, which will be interpreted at print time to mean that you want to run the DAL script and return a value. Now, of course you don't need a real value for this field, but there's nothing to stop the script from assigning data into the other fields at that time.
You do have to make sure that this field is the first in sequence on the section. Otherwise, some of your fields may print before it gets to the point to evaluate this "print time" request.
To make sure this is the first field in sequence will differ depending upon whether you are using DMStudio or the older Image Editor. Since you mentioned 11.5, you could use either. In DMStudio, simply click on the "Objects" tab when the section is open and then click on the field to highlight it in the tree. Then use the button bar just above there to move the field to the top of the list.

Inserting a value from page field into an xml file

Hi there,
I have added a field 'Comments' on a create vacancy page.
There are other fields on that page and the values from those fields are getting stored in an xml file.
This xml file is getting stored in TRANSACTION_DOCUMENT column of table HR_API_TRANSACTIONS.
Is it possible to add the value from the field (that I've added on the page) into the same xml file?
If yes, please tell me how
and if no, tell me what should I do to store that value.
Regards,
Gaurav.

Hi Gaurav,
You need to check in seeded files for the logic of generation of XML file and setting it in DB column. May be in PLSQL API this code would exist.
Once you get that logic you can append your column value in XML tag (need to create new tag) if you are allowed to modify seeded API. Otherwise use free additional attributes of the table.
Hope I am clear.
Regards,
Mukesh Uchaniya

Urgent: Add field in generic data source

Hi,
Could anyone please help me out in resolving the issue to add field from different table in generic datasource.
How can I add it in R/3 data source when a function module was created in ABAP to generate fields from PLPO table?
Whatz the changes has to be done at BW side to map the added field?
Requirement
1) Need one more field in the extractor. Field name is PLAS-LOEKZ. Initially client wanted me to add PLPO-LOEKZ which I added, now he needs the same fields from both the table (PLAS and PLPO).
2)The name of the extractor/structure is ZBW_ROUTINGS_OPERATION
3)Now, we need to add this field (LOEKZ from PLAS) in the function module as well. FM name is: Z_BW_ROUTE_OPERATION_EXTRACTOR. This will be in a SELECT query. We need to add this field in the SELECT statement.
Testing will be done in following steps
1) Go to Transaction RSA3.
2) Enter the data source Z_BW_OPERATION_ATTR(not sure about the name though, but it should end with OPERATION_ATTR)
3) Enter the following details:
EXTTY I
PLNNR 50000032
PLNTY N
4) Now execute (F8) the transaction.
5) Click on Display List
6) In the output, we should be able to see these 2 columns(PLAS-LOEKZ) and (PLPO-LOEKZ)
Please send your valuable suggestions to resolve the issue ASAP as its damn urgent.

Hi,
Here is an overview of the solution -
Use T.Code SE11> ZBW_ROUTINGS_OPERATION. Add your new field (PLAS-LOEKZ) to this table, check, save, activate. Edit your function module, SE37> Z_BW_ROUTE_OPERATION_EXTRACTOR and add your code to look up the correct value of this field LOEKZ from the table PLAS, check, save, activate. (Note that SAP provides a sample function module you can use as a template and customize for your requirements. This sample function module is RSAX_BIW_GET_DATA_SIMPLE.)
Your Generic DataSource Z_BW_OPERATION_ATTR is already created, you dont have to change any settings here. Just regenerate it in RSO2. Now test the extraction for the DataSource in RSA3.
Hope this helps
Sandeep

Re: URGENT: - REGARDING FIELD IN TABLES

HI
I am using transaction code MB5B and i am getting d data but i want to search d field among d tables where amount in currency field(dmbtr) present in bsim or bseg table ,but i want to have dat field which use to display d calculation of d field (dbmtr),plz hel me out its urgent... he or sh will be rewarded...

Hi,
Please verify these internal tables in the program.
DATA: BEGIN OF MAT_SUM OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_SUM_BUK OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_WEG OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_WEG_BUK OCCURS 100,
 DMBTR(09) type p decimals 3,
types : begin of stype_bsim_lean,
 dmbtr like bsim-dmbtr,
TYPES : BEGIN OF STYPE_MSEG_LEAN,
 DMBTR LIKE MSEG-DMBTR,
DATA: BEGIN OF IMSWEG OCCURS 1000,
 DMBTR LIKE MSEG-DMBTR,
I think these are the tables used to sum up the dmbtr.
I think dmbtr is taken from bsim and mseg.Dmbtr id taken from bsim because of the adjustments in finance module..
Reward points if helpful,
Regards,
jinesh.

Urgent:page wise total in smartforms

hi,all
How to do page wise total in smartforms ?
use table in smartforms for summary in pagebreak
ex. page1
10 (line 1)
20 (line 2)
30 (line 3)
total 100
page 2
40 (line 1)
50 (line 2)
total 50
Total in page 1 incorrect = line1(page1) + line2(page1) + line3(page1) + line1 (in page2)
Total in page 2 inccorrect = line2 (in page2) .
please help me guys to solve this problem..

r u printing the internal table data using the TABLE node then--> in the Calculation tab u can do this.
first create a variable in Global difinations-->global data tab.(ex v_tot)
then in the TABLE>calculations TAB> 1select ->sum then 2nd colun>give the field name which u want to calculate (ex-wa_itab-netwr) in the Target Filedname tab> give the varialbe u have declared for the total(ex v_tot). in TIME colums select AFTER theLOOP...
then in theTABLE>footer>inset a line display the variable(total u r using).here
after the the printing the total..->create a program lines> cleat the v_tot... why u need to clear this is.... u want to display only the total value which are displaying in the current page... after printing this v_tot... clear this... so that in the next page it start totaling the freshly...
lem me know if u have any clarifications.
u can calculate as the above way for all the 6 fields.
please Avoid postin duplicate threads

Re: URGENT: - REGARDING FIELD

HI
I am using transaction code MB5B and i am getting d data but i want to search d field among d tables where amount in currency field(dmbtr) present in bsim or bseg table ,but i want to have dat field which use to display d calculation of d field (dbmtr),plz hel me out its urgent... he or sh will be rewarded...

Hi,
Please verify these internal tables in the program.
DATA: BEGIN OF MAT_SUM OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_SUM_BUK OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_WEG OCCURS 100,
 DMBTR(09) type p decimals 3,
DATA: BEGIN OF MAT_WEG_BUK OCCURS 100,
 DMBTR(09) type p decimals 3,
types : begin of stype_bsim_lean,
 dmbtr like bsim-dmbtr,
TYPES : BEGIN OF STYPE_MSEG_LEAN,
 DMBTR LIKE MSEG-DMBTR,
DATA: BEGIN OF IMSWEG OCCURS 1000,
 DMBTR LIKE MSEG-DMBTR,
I think these are the tables used to sum up the dmbtr.
I think dmbtr is taken from bsim and mseg.Dmbtr id taken from bsim because of the adjustments in finance module..
Reward points if helpful,
Regards,
jinesh.

Urgent Page Navigation display the file naming like 03_02.JPG

Hi All,
I have received the pdf file from my client, he make the some tricks in the pdf file name showing in the page navigation bar, how they done this display, please find the below snapshots for your referecne.
1. see the pag navigation tab shownin the 03_00C0.jpg beside the (1/54) this is the 1st page.
2. this page also shown the file name in the page navigation tab this page is 2nd 03_01.jpg actual page is (2/54)
Please help me how to do this and get the same display of the page navigation tab showing the file name like photos.1jpg or 05-115.tiff.
i have more than 200 jpg file how to make like this. Please help this is very urgent. I can't ask this to my client.
System Configuration:
I am using Acrobat Pro 9 in Mac OS 10.5.6.
thx
csm_phil

It may not be easy but you will have to use the Page Numbering dialog by right clicking on the page in the Pages thumbnails and enter the file name as the page number like this

Urgent::! Pager field in BP?

Similar Messages

Maybe you are looking for