(URGENT) Plan of conept  (URGENT)

Hi everyone,
I have OWB 10G installed and I have Report Builder and Discoverer.
I want to do the following:
1. use SCOTT.EMP and SCOTT.DEPT as source for OWB
2. use these two tables to create a simple OWB-Project
a. define these as source modules ???
b. define these as target modules ???
c. deploy and execute these, so I can read them or display them with either Report builder or Discoverer.
I haven't got the foggyest, what so ever. Can someone please help me here???
Thanx
Hans

Depends on what you want to do. Typically, if you want to use these tables as sources, and will not deploy into the scott schema, you would define a source module (let's cal it SCOTT) that will point to the scott schema. Then import the metadata for these tables.
Then, you will have to define your target module (let's call it TGT) where your target objects (tables, dimensions, fact tables (cubes) etc.) will be defined. This schema will have to point to an OWB target DB schema created with the OWB runtime assistant. After defineing the target objects in the target module, you will also model your processing by creating (for example) mappings that extract data from your sources in the scott schema (SCOTT module), process it and place it into the target schema (TGT module).
Finally, you will deploy the target stuff into target schema and run the mappings there.
Regards:
Igor

Similar Messages

  • Urgent Help with Planning Book

    Hello Gurus,
    Need your help with a very urgent issue. I cannot see my key figure values in my planning book(Interactive Planning). I could sucessfully generate my CVC, then initialised my planning area. Then when I go the interactive planning I can see all my characteristics -Ex Material master( has all values), Prod type has values, etc. Iam in DEV system and have to move the whole config to QA now. I have to validate that the config works in QA. Its works ok in the sandbox but I cannot figureout why I can not see the values for key figs that Iam loading from a Flat File. Please help!!!!!!

    Hello Suresh,
    I have one more question for you. Let me tell you my scenario. I have the client giving me a rough forecast for the future. I have to do stat forecast based on the history and check that against the initial forecast given by them. But, the problem I realised now is that when I go to my planning books I can see the values for 2008 in mothly buckets since I have 0calmonth. But the client gave me another file with forecast for 2008 in monthly buckets and for 2009 and 2010 in quarter buckets. So, i have a planning buck profile defined to meet that but, how do I upload the file with both 0calmonth and 0calquarter in a single file. Please let me know!! Urgent task.
    Thanks again,
    Chinna.

  • Not Getting Benifit Plan in a rule -- Please help urgent

    Hi Gurus,
    I need to query the benifit plan and need to override the system calculated values in certain conditions. But I am not able to query the benifit plan in a rule
    Made a rule like this
      D TABLEP0169VARGBBPLAN
    &&&&        CONTINUE  
    0381 AMT=& VAR1AMT/2 ADDWTI6200
    But its not getting the plan '0381' (but its there in the Master data) and its coming to continue always
    *I am invoking the rule like this in the schema*
    ACTIO ZSPT A
    Please help me to figure out whats going wrong. Its very urgent
    thanks

    Arun this is not working ..
    The view name exceeds the 10 char limit in the rule while invoking that with Table..

  • I want to upgrade my plan, but I can not find any upgrade link from single to full, please help. urgent.

    How can I upgrade adobe cc plan, I try to search in google, but I found nothing, or sometimes I found a link but I don't have the same screen as they capture.
    really need help, kind of urgent, don't want to buy the full and pay for both plan.
    Thank you

    Hi saovadee,
    In order to change the plan, please contact our support team via: Contact Customer Care
    Thanks,
    Atul Saini

  • Plan v/s actual materail consumption report for production order - urgent

    Dear all Hi,
    Is there any report or T code from which i can get the plan v/s actual material consumption for a production order or wbs element after completion of order, please suggest / help, the requirement is very urgent.
    thanks in advance

    Hi shaiz,
    You can get that in COOIS tcode
    Select components again List
    then give the plant,Order details
    execute
    You can find 2 fields reqmn qty(nothing but planned) & qty Withdrawn(Actual consumption) in the report
    Hope this hepls
    Rgds,
    SVP

  • Urgent: regarding planned order status

    hi,
    i want to have tcode in which it should display planned order status in which details about whether it is converted to purchase requsition or production order etc..
    plzz help me out in finding dis tcode as it most urgent to me.
    if find useful he or she will be definately rewarded.

    Dear Ric.S,
    If your procurement type for the material is X - Both Procurement typesin MRP2
    view,then after MRP run Planned orders are obtained,only these planned orders
    you can convert either to Production order or else Purchase Req.
    So check in MD04 or MD16 for all the planned orders.
    CO40 - Individual conversion of Planned order into Prod.Order.
    CO41 - Collective conversion of Planned order into Prod.Order.
    MD14 - Individual conversion of Planned order into Purchase Req.
    MD15 - collective conversion of Planned order into Purchase Req.
    Regards
    Mangal

  • Urgent need Marketing Planning and Budjet

    Hi Marketing Gurus
    we have a workshop session on Marketing planning and bUdjet planning
    client using CRM4.0,BI/BW 7.0 (Is BPS integrated/built in in BI or have to upgrade it)  <b>and no Project System in back-end</b>
    1)what is the process flow for marketing planning and budjet if BI-BPS is backend and if no BPS in backend
    2)can u please explain the process flow -how cost planning done for planned and actaul
    3)which elements  should i gather requirements in workshop
    4)what exactly crm role in marketing planning and budjet planning and how BW/ECC integrated
    I will reward good points urgent need as i have session on monday
    Thanks

    HI Rajaram,
    For your workshop especially on marketing planning you have to have alot of questions to ask them.
    basically CRM marketing plan and BI BPS are closely integrated functionalities in campaign management.
    Functioanlly find out waht is that they are looking at to gain from budgeting.
    basically the lcient would like to fix a budget for the campaign / marketing plan for the financial year and then will break it down for further campaigns / marketing elements. at the end he would like to eveluate what is the budget he planned and what he actually spent. There is no nned of project systems even key figure planning can do plan vs actual cost analysis.
    based on this the marketing manager can plan the campaign success and there are standard analytics available for this.
    It is not easy to mention all those in this forum and i suggest you can go through these best practices and help in SAP.
    check them
    http://help.sap.com/saphelp_crm50/helpdata/en/14/98e24044b80b06e10000000a155106/frameset.htm
    also check this out
    http://help.sap.com/bp_crmv250/CRM_DE/index.htm
    and select marketing and check lean management best practices.
    No body can guide as better as that
    Srini

  • I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

    I purchased the Adobe Creative Complete Plan for Annual Prepaid, and the Check Out just wouldn't proceed. It is still loading after click the confirm button. Dear adobe staff, please assist urgently.

    I am having a similar problem. I am using Chrome and tried on Mac and on PC but the same. Its not completing my order and on PC saying:
    We were unable to process your payment please contact our customer support.......... etc
    But strangely its giving a confirmation button again. It gave me this error upon reconfirmation:
    PMT_000011 : adbehme, en_IE, There is money to authorize, But no Aurthorize delegated were applicable, 12834289525

  • Planning Refresh causing Essbase to crash and generate xcp - Urgent

    Has anyone seen this before. In our Production environment (9.2.0.3 on Windows), when a security refresh was attempted from Planning Desktop, it crashed the Essbase server. An XCP file was created and it indicates "Set Filter" pending.
    Suspecting that it had to do with the the Essbase.sec file, so far, we have tried going back a few days, same result again.
    Any thoughts. It is an urgent issue. Oracle support is on conference but any faster response is appreciated.
    - Vijay D.

    VijayDollu wrote:
    Has anyone seen this before. In our Production environment (9.2.0.3 on Windows), when a security refresh was attempted from Planning Desktop, it crashed the Essbase server. An XCP file was created and it indicates "Set Filter" pending.
    Suspecting that it had to do with the the Essbase.sec file, so far, we have tried going back a few days, same result again.
    Any thoughts. It is an urgent issue. Oracle support is on conference but any faster response is appreciated.
    - Vijay D.We encountered exactly the same problem. However when we shutdown the Essbase services again, the essbase.sec corrupted again! We don't know why.

  • Urgent ***  Is No. of Planned delivery days depends on FACTORY CALENDER DAY

    Hi ,
    I question for all .  Is No. of Planned delivery days calculated on <b>FACTORY CALENDER DAY or  normal difference between PO delivery and GR date .</b>
    Please let me know ,its urgent.
    Regards ,
    Amarnath Reddy.<b></b>

    Hi,
    Planned delivery period is CALENDAR days NOT Work days.
    It does not use the factory calendar and you should not even TRY to make it do so.
    Steve B

  • Insp.plan(very urgent)

    hi experts,
    plz give reply for this thread it  is  very urgent
    My scenario:
    I am using 02 insp type.initially i want to post the material (w/o purchase order).
    I want to inspect the material(ROH) while issuing the production.for this what type of settings to do.in which stock type i have to post the roh.
    i  have created  insp.plan with 06  type for ROH.insp lots  are forming but without results recording and       ud i am able              to  do everything to that prodn.order.i need it should restrict .
    regards.
    plz clarify this i will reward u and close this thread

    Hi Prasad,
    I think you`ve done all the things needed. But one thing you need to remember is that 02 inspection is non-stock relevent similar to in-process inspection. It means you can do record results  and take ud, but you cannot do any stock posting. Hope you got it cleared.
    Keerthi

  • Hyperion Planning Urgent

    Hi,
    We have a planning application which was working fine since yesterday. When I was working in shared services on user rights, i was able to provision few new users.
    After completing this process I tried to login into the Hyperion Planning Application but i got an error "Failed to sync with user provisioning. Check Planning log for details" However I am able to login with "admin" in planning but could not see planning forms because of non-availability of outline and variables in essbase.
    I went into essbase to further investigate and noticed that there was no outline in essbase for the planning applocation.
    I also tried to push the outlin from planning but it says that " verify that hyperion essbase is running and check your network connections"
    I also restarted all the services but with no success.
    Please help as this is urgent and we are into UAT phase and moving to production.
    Thanks

    We are not using Maxl for any purpose in here and we are not sure how to use it as well....one more thing which is quite visible in my logs is
    Unable to create connection for the pool: com.hyperion.planning.olap.EssbaseException (1051293)
    Can not get OLAP connection: java.lang.Exception: No object were successfully created. This can be caused by any of the following: The OLAP Server is not running, The DBMS is not running, the DBMS is running on a different machine that the one specified, the name and password provided were incorrect.
    com.hyperion.planning.olap.NoAvailableOlapConnectionsException: Unable to obtain a connection to Hyperion Essbase. If this problem persists, please contact your administrator.
    Unable to create connection for the pool: com.hyperion.planning.olap.EssbaseException (1051293)
    Can not get OLAP connection: java.lang.Exception: No object were successfully created. This can be caused by any of the following: The OLAP Server is not running, The DBMS is not running, the DBMS is running on a different machine that the one specified, the name and password provided were incorrect.
    com.hyperion.planning.HspRuntimeException: Failed to sync with user provisioning. Check Planning log for details

  • Integrated Planning : URGENT

    Hello
    I am having some problem with my budgets for the 12th period. I have posted ques but nobody has replied to it. Can someone please give me their email id so that i can explain what the issue is. I would be really thankful to you. It has been 2 days for this issue and it is urgent to be solved.

    Hi,
    It seems to be some JCO error. Run note 937697, it can verify if your system is well configured. Furthermore you can apply the latest patch available for your SPS version.
    I hope this can help you.
    Lucimar

  • Urgent help needed in creation of planning application

    Hi,
    Iam new to planning. I installed planning and configured(Created planning instance, Datasource). When i login into workspace and want to create new planning application. The wizard opens correctly. After giving application name, calender,currency type, Plan type, etc... when i click finish to create a new planning application, it says *"An error occured while processing this page. Check the log for detail".* But i observed one thing the application was created in Essbase without Databases and outline. So can anyone explain me wats the exact prob. where I can see the Log details. Help me.
    Thanks in advance.

    Hi,
    Databases will not be created until you created until you refresh to essbase from within planning, you are not up to that stage yet. Only an essbase application will be created.
    What I suggest you do, is delete the essbase application. Then run planning from the start menu and not as a service, this will mean you will get any error messages displayed in the window.
    Then try and perform the application creation again and see what errors are produced.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to create a User in Planning (Very Urgent)

    Hi All,
    I am Using Planning 4.0 version. When I am trying to create a user from Planning Web it is throwing me the below Error:
    User Name is Invalid: test
    I tried giving different usernames but no luck.
    Is this a bug??? Are there any log files which I can look at for more information.
    Please let me know your valuable inputs.
    Thanks in Advance

    Hi,
    But I have this user access couple of weeks back. I do not know where to check for the log files.
    This user is available in Active directory and can access production database. But I am unable to create the same user in developement environment. Even I tried to create couple of users who are in the Actice directory. I am unable to create any users.
    Where should I check to get more information in order to resolve this issue.
    Please let me know your inputs

Maybe you are looking for