Urgent please _ copying query
I have a query to be copied from one cube to another multiprovider. I am using transaction RSZC to copy query from cube to multiprovider, which is not allowing me to do so,In the infocube comaptibility check it says some characteristics are missing in target. How to copy query, Please?
the best way is to use the transaction RSZC.
But the two Infoprovider must have the same characteristics (almost the charact used by the query).
If you're able to adapt the target Infoprovider with the missed characteristics you can use the RSZC.
In other case you have to reproduce manually the query.
Regards
Similar Messages
-
Urgent please _ pre query
Dear Experts,
I have a query based on a Multiprovider with 2 cubes (inventory cube and sales order cube). I need extra information of material like material size, season and colour. So I have been advised to include an Ods/DSO in order to get this information as it is not available in the above cubes an to write a pre query for size, season, colour . I never done this before.
Could you please guide me, urgent please? Do I need to add ods as I added the cubes before to Multiprovider and identify chars and keyfigures and then activate?
How should I write pre query? How can I link the query I have with the pre query? Please help me
Thanks,
RiyaActually the fastest and most efficient way of doing will be adding the requested fields in the cube and load the data from DSO to cube, if the DSO is feeding data to the cube. If you don't want to go that route, then you need to include the DSO in your multiprovider and identify the fields you need, since all the cube fields are already in the DSO, then there is no need to keep the cube in the multiprovider. Now you will have one dso and one cube in the multiprovider and in identification you specify all the fields as it is in the cube you had removed.
Hope I am clear.
thanks.
Wond -
Copy query (SQ01) to new query with new infoset
Hi,
Not sure if this is correct forum.
Is there a way to copy existing query with an infoset to a new query using another created infoset?
If so, please explain how.
Kind regardsHi,
If you want to copy a query for another infoset its not possible.
The copied query will work for that infoset only which you have been generated.
You need to make a new infoset and than create a new query for it.
Regrds,
Nikhil. -
Urgent please/ Window size + avoid saving
Hi I have 2 problems I hope you can help me with urgently
please:
1- I have the attached code in it there is a link(summary)
which once clicked, a new HTML window will open this window is of
the same size as the parent I need to make it smaller and appear in
the center of the parent window. I have played withthe 800X600
dimentios in the code but no use? Any idea
2- In the the new window( which will appear once clicking the
link summary), I need to make the 'save page as' and the 'send
link' in the file menu of the browser dim (inactive) as I do not
the user to save the content of this window ? any idea how to stop
the user from saving the content knowing that the content is a HTML
file that has a .swf file with its control buttons?
Appreciate a fast help
ThanksHello,
For 1, see this link:
http://www.peachpit.com/articles/article.aspx?p=31661&seqNum=2
The tutorial uses an image link to open the window but you
can easily use
text instead.
For 2, during the tutorial in the link above you'll see how
to not show the
menu bar in the popup window when you get to using DW's Open
Browser
Behavior.
It may deter the novice user, but anyone who wants to save
the content can
do so easily. Firefox can be set to show the menu regardless
of the script
telling it not to, or anyone can simply view the source code
and copy the
URL for the popup and paste it into a new window, complete
with menus.
Of course, there are also Firefox extensions that download
any Flash
displayed on a page including in a popup window.
In other words, if you don't want people saving it, don't put
it on the web.
Take care,
Tim
"fsurrey" <[email protected]> wrote in
message
news:[email protected]...
> Hi I have 2 problems I hope you can help me with
urgently please:
>
> 1- I have the attached code in it there is a
link(summary) which once
> clicked,
> a new HTML window will open this window is of the same
size as the parent
> I
> need to make it smaller and appear in the center of the
parent window. I
> have
> played withthe 800X600 dimentios in the code but no use?
Any idea
>
> 2- In the the new window( which will appear once
clicking the link
> summary),
> I need to make the 'save page as' and the 'send link' in
the file menu of
> the
> browser dim (inactive) as I do not the user to save the
content of this
> window
> ? any idea how to stop the user from saving the content
knowing that the
> content is a HTML file that has a .swf file with its
control buttons?
>
> Appreciate a fast help
> Thanks
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml"><head>
>
>
>
>
> <meta http-equiv="Content-Type" content="text/html;
> charset=iso-8859-1"><title>Tutorials_A
View:Different Web
> Designers</title>
>
> <style type="text/css">
> <!--
> .style25 {font-family: "Times New Roman", Times, serif;
font-size: 14px;
> color: #108A98;}
> .style28 {color: #108A98}
> .style31 {
> color: #108A98;
> font-weight: bold;
> font-size: 14px;
> }
> .style52 {font-family: "Times New Roman", Times, serif;
font-size: 14px;
> color: #108A98; font-weight: bold; }
> .style54 {font-family: "Times New Roman", Times, serif;
font-size: 12px;
> color: #108A98; font-weight: bold; }
> .style57 {font-size: 12px}
> .style59 {font-size: 14px}
> a:link {
> text-decoration: none;
> }
> a:visited {
> text-decoration: none;
> }
> a:hover {
> text-decoration: underline;
> }
> a:active {
> text-decoration: none;
> }
> .style61 {font-family: "Times New Roman", Times, serif;
font-size: 18px;
> color: #108A98; font-weight: bold; }
> .style62 {
> font-size: 16px;
> color: #108A98;
> font-family: "Times New Roman", Times, serif;
> font-weight: bold;
> }
> -->
> </style>
> </head><body>
>
> <div align="center">
> <table width="611" border="0" cellpadding="0"
cellspacing="0">
> <!--DWLayoutTable-->
> <tbody><tr>
> <td colspan="2" valign="top"
>
height="115"><!--DWLayoutEmptyCell--> </td>
> </tr>
> <tr>
> <td rowspan="2" valign="top"
>
width="161"><!--DWLayoutEmptyCell--> </td>
> <td class="style31" valign="top" width="450"
height="24"><a
> href="../../My web site/my final web site/home.html"
> class="style28"><u>Home</u></a>
>
<a
> href="../../My web site/my final web site/links.html"
> class="style28"><u>Links</u></a>
>
<a
> href="../../My web site/my final web site/About.html"
> class="style25"><u>About
> us</u></a>
>
<a
> href="../../My web site/my final web site/links.html"
> class="style25"><u>Join
> us</u></a>
>
<a
> href="../../My web site/my final web
site/contactus.html"
> class="style31"> <u>Contact
us</u> </a></td>
> </tr>
> <tr>
> <td valign="top" align="left"
height="511"><table width="449"
> border="0" height="437">
> <tbody><tr>
> <td valign="top" align="left" height="433"><p
align="left"
>
class="style25"> &nbs
> p; <span
class="style61"> </span> <br
/>
>
>
<strong> </strong></p
>>
> <p
>
class="style54"> &nbs
>
p;
>
&n
> bsp; </p>
> <p class="style52"><span
>
class="style57"> &nbs
>
p;
>
&n
> bsp; </span><br />
> <br />
>
>
&n
>
bsp; <span
>
class="style57"> &nbs
> p;
. <a href="try/try.htm"
> target="_blank" class="style31"
onclick="openNewWin('../../The
> Tutorials/Summary/Summary/Summary.htm',800,600);return
> false;">Summary</a></span></p>
> <p
>
class="style25"><strong> &n
>
bsp; <span
>
class="style57"> &nbs
>
p;
</span></strong><br />
>
>
&n
>
bsp;
</p></td>
> </tr>
> </tbody></table></td>
> </tr>
> </tbody>
> </table>
> </div>
>
> </body></html>
> -
Hi,
what is difference b/w Copy Query and Saving query by " Save As " option?
If I delete some query in development , how does that gets reflected in production?
Please let me know.
Thanks,
JeetuHi Jeetu,
<i>what is difference b/w Copy Query and Saving query by " Save As " option?</i> - the Copy query function can be used to copy query between Infoproviders but the condition is that both the <b>Infoproviders should have common chars and KFs.</b>
<i>If I delete some query in development , how does that gets reflected in production?</i> - You need to delete the query in production as well.
Bye
Dinesh -
Date format Problem in OAF R12 Urgent Please help!!!
We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti -
FACE VALUE nt apearing in the orginal query, bt appearg in the copied query
Hi Friends,
I've got very rediculous problem, i'll explaain u clearly, so please give me the solution.
Problem:
*I've got one query in CFM(corporate finance management)
*that quer's got two structures in Rows and Columns
*in columns the first two columns are FACE VALUE and BOOK VALUE
*Actually i get the Face Value from "No of Units opening Balance" multiplied by "Nominal Value Unit Quoted" (which is an attribute of Security Identification No in CFM)
So, to get that i've created Formula Variable with Replacement path to get that Nominal Value into the calculation.
*so the query used to work fine in production also, but suddently FACE VALUE stopped appearing in the query, but if i make the copy of that query and excute then the value is coming properly in the copied query but not coming in the original query, this query has already been encorporated into the workbook,
i analyzed the query, it seems that only becoz of Nominal Value it is causing the porblem in the original query, but it souldn't come in the copied query also, right? if i make a copy of that original query and then excute, the Face Value is coming properly,
*Really it seems rediculous, i'm not able to get the exact problem, whether it is bug or not, i'm not able to get solution.
awaiting for your replays.
Regards,
BalajiReddy K.When your query takes too long ...
When your query takes too long ...
HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting -
Urgent Help:Tree structured query
Hi,
My requirement is as follows..
I have two tables let's say A and B
Table A has two fileds ID and PARENT_ID
ID is a primary key and Parent_id is a foreign key to the same tables "ID" field(i.e, parent_id references a.id)
Table B has 2 fields : status and id
where ID is a foreign key to table A.id(B.id references A.ID)
The data in those two tables looks like this
A
ID PARENT_ID
1 2
2 3
3 4
4
5 6
6 7
7
Table B has ..
Status id
Approved 1
Approved 2
Now I would like to select all the Approved Ids and all parent_IDs
So i should get the following result
id
1
2
3
4
Can somebody help me write this query.. this is Kinda urgent Please.
Thank yousql>select * from a;
ID PARENT_ID
1 2
2 3
3 4
4
5 6
6 7
7
7 rows selected.
sql>select * from b;
STATUS ID
Approved 1
Approved 2
2 rows selected.
sql>select distinct id
2 from a
3 start with id in (select id
4 from b
5 where status = 'Approved')
6 connect by prior parent_id = id;
ID
1
2
3
4
4 rows selected. -
Copy Query View from one User to another User
Hi
I have a question that whether we can copy Query View created by an User to another User .
Please help me with some way of doing it.
Regards,
VimarshVimarsh,
Can the user not just eMail their view to their colleague?
Regards
Gill -
Web Template can not be found in WAD - Urgent please....
Hi,
I have activated a Web Template from business content. I have also included the same in a role.
I need to make some changes in this. I can not find this in WAD. I can not find the role in WAD. When I search this in Metadata repository, I can see the web template but surprinsingly it doesn't show the underline query name and role..
can anyone please tell me the reason for this. This is urgent please.
Regards,1. Display the role in PFCG. Do you see the web template listed?
2. Is the role assigned to your id?
3. Did you try searching (by using the binoculars) for the web template in WAD open window? -
Copy Query option missing free charectersitics
Hi Experts,
When I am copying the query (Tools> Copy Query), the free characteristics from the original query are missing in the copied query. Could you please guide if there is a way to copy the free chars too?
BW SeekerHi Sai,
When you do a copy query to a different location you have only changed the location for the results. Hence only the result rows will be displayed and not the free chars.
Hope this helps.
Bhargava -
Copy Query Variants from InfoCube to MultiProvider
Hi,
Is it possible to copy query variants from an infocube to a multiprovider?
Basically, we used RSZC to copy the queries from the infocube to the multiprovider, but it doesn't look like the variants were copied over. Is there an ABAP program or some other workaround that can expedite/facilitate in recreating the variants on the multiprovider queries?
Your help is much appreciated.
Thanks,
KK
Edited by: Kristin Kalalau on Jan 29, 2009 10:48 PMIt is possible to copy but the only requirement is your target cube structure should match with the source cube structure.
Thanks...
Shambhu
Edited by: Shambhu Kumar Gupta on Jan 30, 2009 12:01 PM -
urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help
to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
Hi All,Please send me abap-hr material .Its urgent please.
Hi All,Please send me abap-hr material .Its urgent please.
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
Maybe you are looking for
-
Airport Express + TV + Bowers & Wilkens MM-1 Speakers Setup
I am interested in purchasing the Airport Express and need some help before I purchase to make sure its the right solution.... I currently have the MacMini, 40" LCD HDTV, Bowers & Wilkens MM-1 speakers and want to add an express to use airplay with m
-
Transfer of the parameters to the class
Merry Cristmas and Happy New Year to everyone! I have the following problem I have a class public class Automat public static int col; int D_size,ia,ja; float x_coord,y_coord; double fy,fx,fxy; double [] angle; Material mat; Automat(int dsize, i
-
Scrollbars in Flash CS5.5
I published a Flash file with the html wrapper. Flash publish settings- Size - % Height- 100% Width 100% Scale- No scale HTML alignment- Default Flash horizontal alignment- Center Flash vertical alignment- Center All good but there are no scroll bars
-
Hi, During playback my iPod and iTunes are forcing gaps between songs. In iTunes I have selected "no gaps" in Edit>Preferences>Advanced>Burning, and, as suggested in the FAQs/forums, I have selected "Crossfade Playback" in Edit>Preferences>Playback a
-
HELP ! When I tried to open my file (which I worked on this morning at home and have tried to open on 3 different Macs here at school,) it says "file is damaged and can not be opened or repaired" Someone pleeease tell me this is just a nightmare and