(Urgent - Please Help) E3500 Can not started up
Dear Sun Experts:
Please could you help me for the E3500; the system is at the moment can not bring up to service.
My E3500 has a major problem and the system has automatically reboot itself.
Afterwards; the below error messages has popped up.
md 101 : /dev/dsk/c2t4d0s0 need maintenance
metainit somcsys3: stale databases.
Insufficient metadevice database replicas located, use metadb to delete database which are broken.
I use the fsck tried to fix the /dev/dsk/c2t4d0s0 and after fixed, I tried to start up the E3500 but found the problem:
Enter Run Level: 0-6 , s , S
I have enter 6 put the E3500 refuse to start up and with the following messages:
INIT: Can not create /var/adm/utmp or /var/adm/utmpx
INIT: SINGLE USER MODE
My E3500 is equipped with 8 x 9 Gb harddisk with 4 system and 4 mirror and I checked that the problem disk are belonged to mirror partitions.
I tried format command and found the E3500 can not recognise the mirror partitions.
Can any SUN expert help me?
I
I have try another MAC, but it still shown the same message....
Similar Messages
-
Please help iphone can't start up,the masage say error 1611.can you show me how to fix this .Thank you
My iphone can't start on the screen say itune ,I go to itune try restore but the massage say error 1611.
Mobile device not sevice.when i turn omy iphone it can't statr but only the Apple picture show on screen.can you guy try help me Please.Thank you -
Urgent, please help-- connection does not close
Hi,
We are using Txdatasource, Oracle thin driver in WLS6.1 sp2. The problem we have
is that we open connection and pass the connection as parameter to third part
tool to generate report, but the tool doesn't close connection after finish, then
the connection is left never being closed, and our connections in connection pool
soon used up, have to restart weblogic to reset. the connection pool is set to
allow shrink, but those connections are not recycled. Please help, how do we somehow
set up WLS or database so that if a connection is not used for some time system
automatically close connection? Thank you very much. your help is greatly appreciatedHi Chun,
I don't think it's possible whithout changing code. Primaryly it's because
it hard to tell whether connection is abandoned or still in use. So you have
to make changes in your code.
Regards,
Slava Imeshev
"Chun" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Thanks for reply. The reporting tool is supposed to close connection butit didn't.
And now we need some quick fix on it without touching code.
Seems like the used connection can not be garbage collected because theconnection
I used yesterday is still not recycled today. ( I monitor JDBC in WebLogicConsole,
the "connections" column on "Monitoring" didn't change). No matter how bigI set
the maximum number of connections, the connections will use up finally andwe
have to restart WebLogic server.
Is there any way to make connection drop after some time?
"Slava Imeshev" <[email protected]> wrote:
Hi Chun,
"Chun" <[email protected]> wrote in message
news:[email protected]...
We are using Txdatasource, Oracle thin driver in WLS6.1 sp2. The
problem
we have
is that we open connection and pass the connection as parameter tothird
part
tool to generate report, but the tool doesn't close connection afterfinish, then
the connection is left never being closed, and our connections inconnection pool
What prevents you from closing connection after control is returned
back from the reporting tool?
soon used up, have to restart weblogic to reset. the connection poolis
set to
allow shrink, but those connections are not recycled. Please help,how do
we somehow
set up WLS or database so that if a connection is not used for sometime
system
automatically close connection?Weblogic closes connections that were not returned to the pool when
they are GC-ed. Yet you should not relay on this feature as by the
moment a connection is closed the pool maybe already used up.
The other option I was thinking about is that it's possible to size
of the pool you use is too small for the application. Did you try to
increase (let say double) size of the pool?
FYI having shrinking and refresh enabled doesn't make much
sense in most of the cases. You can improve performance and
stability of your application by setting initial number of connections
to max and setting refresh period to let say 99999.
Hope this helps,
Regards,
Slava Imeshev -
I have a billing problem ,please help i can not download anything
i have a billing problem i can not download anything and this frustrates me i phone uses please help me before i throw away this i phone.
Contact itunes at expresslane.apple.com or reportaproblem.apple.com.
But Itunes can not refund until the balance is paid.
purchase a gift card redeem it in the store if you want refund for the charges contact itunes. -
HELP: I can not start Photoshop
Today he appeared a strange problem with Photoshop CS4. When I boot window appears with the license agreement (which did not before) I give to accept and close the window.
Nothing more, Photoshop will not start. I am desperate because I did not figure the solution.
Can you help?What OS do you have? Go to Start, start search, type in MSconfig. Click on MSconfig, startup and ensure Adone CS4 Service manager is checked.
Also try trashing your Prefs by either the keyboard or the manual way by reading this:
http://forums.adobe.com/thread/375776?tstart=0 -
Hi
I have already asked the same Q a few hours ago but with no answer till now , i can not download any thing to my my i pad please help ?Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Please help, I can not open the word document after I have exported from a PDF
Please help, I have bought this programme to convert PDF documents to word documents. All I find at the moment is that the document is not being converted and will not open once I have saved. It asks which programme I would like to select to open the saved file, and them does not work.
Please let me know where I am going wrong?
KoGood day Ko,
It sounds like the file extension may have been dropped when you saved the file to your computer.
Does your converted file have the .docx or .xlsx extension on the end? If it doesn't, try renaming the file and appending the file extension. You should be able to open your saved document in Word or Excel then.
Kind regards,
David -
Please help, I can not download app's I have to chance Country Stores
Please how do I change country stores. I can not download app's because I am in the Colombian Store, but I do live in Ecuador and ask to go to that store
How to Change Your App Store Account Location | eHow.com
You can only purchase items form the country's store in which you are located and your account, including payment method, must be associated with that country. -
Please help I can not launch Adobe Reader XI
My adobe reader suddenly stopped working yesterday.
I was running version 8 or 9 under windos 7 and it suddenly gave me a strange error message that the Core DLL failed to load. I have never seen this happen before. It's also asking me if I want to run protected mode off and I keep saying yes please help!!
thanks
MarcI used version 9. Basically what happened was it decided to stop working. I uninstalled version 9 and installed 11 and it gives the same error message "Core DLL failed to load". Also tried running it in Non protected mode. also tried repairing both versions in the control panel. nothing's working! very strange considering up to a few days ago version 9 was wortking fine and has been for years
thanks any help is appreciated! -
Please help, I can not sync my iCal w/ my other IOS5 devices.
I can not sync my iCal in my Mac Book Pro with other iOS5 Devices. The server responded with "507" to operation CalDAVWriteEntityQueueableOperation.
What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method -
Please help - I can not create large arrays of images (no more than 108 elements)
Hello,
I am working in an application where i acquire 300 high resolution images (3Mp) and then i process each of those frames.
When i try to put alll those frames in one array of images, the system does not let me more than 108 elements. There is no such message like out of memory or memory error. It is just that when i visualize the array of images, there are good frames the first 108 elements, and then white frames the rest of the elements.
Ideallically i would prefer to process frames as i am acquiring them, but i am concerned about the remaining processing time for the rest of the tasks.
Then, as an alternative, I have tried to store frames in two shorter arrays, and i ended up observing that when the first array (say 50 elements) is full and the second array starts (another 50 elements for example), labview needs a certain time in the the middle (like three seconds between closing first array and starting acquiring on the second array). If i dont wait that time between arrays, both arrays contain the same information. I know, this is weird, and i know about the fact of passing information by reference on imaq images.
The most interesting thing is that when i reduce considerably the resolution of the image (say that now, instead 3Mp they are 2Mp), the maximum number of elements on the arrays are exactly the same: 108, so this makes me wonder if it is a memory constrain. And the code is fairly simple, there is no way that i am cutting the acquisition at the number 108.
So my question is, How can i put 300 frames in one just one array? or How can eliminate the time i have to wait between arrays?
I have heard about memory allocation and so, but i am not sure how to proceed. I have windows 7.
Thanks in advance,
RobertoIt's hard to visualize. Please post the code - or at least a shell representing your code - so we can see what is happening. Are you sure you are getting 108 contiguous pictures, or are some aquisitions being skipped? Is the first picture in the array the first aqcuisition? Is the last picture the last acquisition?
I really don't think it is about memory allocation. I think it could be about your method of acquiring and processing said acquisitions.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Please Help me can't start svrmgrl
After I have installed Oracle8i Linux(glibc2.1) :
when i try the command
sqlplus:
Message file sp1.msb not found Error 6 initializing SQL*Plus
when i try the command
svrmgrl:
Message 4505 not found; No message file for product=SVRMGR,facility=MGR
Error while trying to retrieve text for error ORA-03113
Appreciate any help.
I specified in my PATH :$ORACLE_HOME/sqlplus/mesg
Thanks for your timeDo the following,
This workaround is for Redhat 7.0 and oracle 8.1.6
Workaround
~~~~~~~~~~
(for RedHat 7.0) Install the following packages: U can install the packages using rpm command mount the cdrom redhat 7.0 type the following command
rpm -i compat-egcs-6.2-1.1.2.9.i386.rpm this is the filename in the cdrom for the following first package. For second package you should follow the same step above.
compat-egcs-6.2-1.1.2.9
compat-glibc-6.2-2.1.3.2
and modify all occurrences of CC and LINK definitions in all env_*.mk
makefiles in the $ORACLE_HOME software tree from either $(LDCCOM) or
gcc to i386-glibc21-linux-gcc.
To better illustrate the needed changes, the lines such as
CC=cc
LINK=$(LDCCOM)
LINK=$(PURECMDS) gcc $(LDFLAGS) $(COMPOBJS)
will become
CC=i386-glibc21-linux-gcc
LINK=i386-glibc21-linux-gcc
LINK=$(PURECMDS) i386-glibc21-linux-gcc $(LDFLAGS) $(COMPOBJS)
Be sure there will be multiple accurances of the above mentioned expressions check twice. That is CC= may accour twice in the file. You have to apply change for both.
You will also need to modify the genclntsh shell script and substitute
LD="ld -shared -L${ORACLE_HOME}/lib"
LD_RUNTIME="-R${ORACLE_HOME}/lib"
LD_OPT="-h ${CLNT_LIB}"
with
LD="i386-glibc21-linux-gcc -shared -L${ORACLE_HOME}/lib"
LD_RUNTIME="-Wl,-R${ORACLE_HOME}/lib"
LD_OPT="-Wl,-h${CLNT_LIB}"
Finally, rebuild libclntsh.so by running 'genclntsh' and relink oracle,
svrmgrl etc. using the usual relink commands. You'll get warnings in
the relink process but they can be ignored. While running the genclntsh you will get unrecognized command something like that.Ignore those errors. If you get exit code 1 then check the modifications you have done and run it again. If it is successfull it wont give exit code 0.
This has been tested on env_rdbms.mk, env_sqlplus.mk, env_network.mk
but should be working on the other makefiles as well.
All the best,it will work out. Thanks for those who made this possible.
Hari -
Please help! Can not retrieve Quicktime Pro registration code!!!
I purchase Quictime Pro online many months ago and recently re-formatted my PowerBook. I am having trouble registering again. I have explored the Apple sites and tried to log in to my account to retrieve the number but the card I used to buy it was a Laser card (I'm in Ireland) but my account is presently set up to a Visa card. I tried setting it up again with the Laser card but it wouldn't accept it.
Is there some way of finding the number? I can answer any security questions regarding my account to verify I bought it. I even have the order number from when I ordered it!
Can anybody help?
Any information would be sooo appreciated. I'd hate to pay for it again.
Please respond to:
[email protected]
17" PowerBook G4 Mac OS X (10.3.9)Did you try logging into the Apple Store where you bought Pro? You should see a link to review your account. Clicking that should bring up a screen to enter your Apple ID and Password. After entering those items you should see a link to Software Downloads that will show your registration name and key. You will need to use those items exactly as listed, so it is best to copy and paste them into the registraition page of QT preferences in the Player Edit menu.
-
Please help i can not find my mobile phone?
I lost my mobile phone but i don't know ,if it is stolen or not.
I don't know what to do .Please support me.Unfortunatly their are some individuals with the know how and equipment to access network blocked imei handsets.
Mind if they are caught a 5 year prison term awaits them.
Mobiles have and always be an easy target for theives. People have lost their lifes for refusing to hand them over.
I was in a market traders shop a while ago and two young lads came in with a handset to ask for it to be opened up to all networks. They could not even answer the question on what network it was originally on. The shop worker shrugged her shoulders and went ahead and opened it up as requested , all for £5 !! I left shaking my head ?
Follow the advice and contact your network to block the sim and fone, and also inform the police in order to get a crime number in order to start claims on any insurance you may have.
Nokia Lumia 520
iphone 6 Plus.
Be happy !! -
Please help, i can not eject stuck cd
how to force eject stuck cd in my macbook pro 13"?
seems the dvd thicker than the dvd tray
thank a lotYo, budisalm,
Did that post by CT help solve your problem?
When this has happened to me and I can hear the CD/DVD trying to eject, I make a "guide" to aid the ejection. Two thin sheets of plastic, cut to just fit inside the front felt slots of the drive. Flair them a bit, the idea is to guide the CD/DVD past the slot when it's trying to eject. The box from those preprepared salads you get from the grocery store work nicely.
Maybe you are looking for
-
How to loop at these 2 itabs?
Hi Champs, In the mycontext tab, i am looping at two internal tables based on where condition. I need to filter data from my 2nd int table and put it out on the form. But somehow i am not bale to check the condition and as a a result i could see all
-
How can i used pai in screen 1000 to change the select-options field?
hi,all. I want used pai to change the select-options field,but it can't works. the mainly code is: REPORT ZTEST99. TABLES :MARA,MAKT,MARC. SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 . select-options:s_matnr for mara-matnr,
-
How do I back up myentire iPhoto library to an an additional hard drive, I have a WD My Book 1TB hooked up to my MacBook Pro via USB 2 port.
-
Installing BlazeDS on shared tomcat instance
Is it possible to successfully install BlazeDS on a shared Tomcat instance, where I may not be able to add files to the tomcat/lib folder or modify the catalina.properties file? I need tu support custom authentication, as described here: http://op
-
Physical Connection Best Practices
Hi; I hope someone can help us. We already have 4 SG300 52 ports Switches: (L2 mode) We need to know the best way to connect the Switches and the router due to: - Do not get excesive latency in the internal network. - Do not get SPF problems. - Do no