Urgent Please.... Help on https issue

Hi,
I have CSS11501, i have problem during accessing the server with the VIP only when using https, ssl certificates has been installed in CSS. That is i tried with http only and it worked fine. but when use https im getting a session expired all the time
i checked also with IE and Mozilla and found out both are the same message always "Session Expired" but noticed with Mozilla always the behavoiur is much much better !!
there is no no load-balancing, and i was checking with bot set of servers PUSH/PULL and GOTBOFE (as attached file shows) and on both im getting the same problem !!
Please Can you advice !!!
Regards,
Hasan

Hasan,
what do you mean by session expired ?
Are you able to see the page, but after a while, when you click on a link you get a session expired ?
There is 4 minutes idle timeout on the ssl-module.
Virtual TCP Inactivity TO: 240 Server TCP Inactivity TO: 240
After that, the connection is removed.
Not sure if that is the problem.
Maybe get us a sniffer trace showing the problem and explain what you see and do before getting the error.
Gilles.

Similar Messages

Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.

Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
Selvam

Is your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.

Urgent please help

hi all,
we are running two instance in two different machines A and B (oracle 9.2.0.1.0/win2000). we exported the data from A and copied to machine B.data has not been modified since 'copy'.
now the problem is , the following query
select count(*)
from table1@xyz c
inner join table12 a on a.party_id = c.account_id
inner join table3 m on m.old_id = c.id
give 0 in machine A and the same qurey gives 23453 in machine B.
and another thing is if we trim all the columns involved in the join condition and run it in machine A then it gives 23453 as in machine B.what could be the problem in machine A.please help,as the issue is urgent one
i have given the structures..
table1
Name Null? Type
ID NOT NULL CHAR(20)
TIME_STAMP NOT NULL VARCHAR2(100)
ACCOUNT_NO NOT NULL CHAR(25)
ACCOUNT_ID NOT NULL CHAR(20)
CURRENCY_ID NOT NULL CHAR(20)
AMT_BOOKED NOT NULL FLOAT(126)
AMT_PAID NOT NULL FLOAT(126)
AMT_OUTSTAND NOT NULL FLOAT(126)
AVL_CREDIT NOT NULL FLOAT(126)
FLAGS NOT NULL CHAR(10)
table12
Name Null? Type
ID NOT NULL CHAR(20)
TIME_STAMP NOT NULL VARCHAR2(100)
PARTY_ID NOT NULL CHAR(20)
ACCOUNT_ID NOT NULL CHAR(20)
table3
Name Null? Type
OLD_ID NOT NULL CHAR(20)
NEW_ID NOT NULL CHAR(20)

Hi, you can generate and check an explain plan on each server, and compare them.

Urgent please help, this program should work

Urgent please help.
I need to solve or I will be in big trouble.
This program works at my home computer which is not networked.
The hard disk was put onto another computer at another location whihc is networked. Here my program worked on Monday 14 october but since for the last two days it is not working without me changing any code. Why do I receive this error message???
Error: 500
Location: /myJSPs/jsp/portal-project2/processviewfiles_dir.jsp
Internal Servlet Error:
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:162)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)
Root cause:
java.lang.NullPointerException
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:132)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)

foolishmatt,
The code is quit large.
to understand the program I think all the code needs to be examined.
I would need to send to you in an email.
Here is my e-mail
[email protected]
if you contact me than I can send the code to you.
Thank you in advance.

Urgent, Please help me in this problem.I am getting problem while installation

I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.

Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP]

Date format Problem in OAF R12 Urgent Please help!!!

We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.

Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

Hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode

hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys

- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again.

0P_FYEAR issue - Urgent - Please help

Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,

Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya

URGENT!!! Java Gurus Please Help with adf issue!

PLEASE SEE MY LATEST POST BELOW TIMO'S RESPONSE. THE REQUIREMENT HAS CHANGED. THAT IS THE ISSUE I AM LOOKING A SOLUTION FOR.
Hello All,
We have a requirement where our adf/jsf app needs to pick an EXCEL file from the server where the application is deployed. The sequence is :
User comes to the page
Clicks on "Open EXCEL" button
EXCEL file located in the c:/ of the server opens up.
How can this be done? I do not see any coding needed because the EXCEL file is being opened as is (and after user views it he closes the file) and the data is not being transferred to the jspx page.
*We are totally flexible in how this is implemented - ie, using button, link , html etc etc. What ever works!!!!*
Thanks,
Edited by: user12054715 on Aug 17, 2010 8:54 PM
Edited by: user12054715 on Aug 18, 2010 4:11 PM
Edited by: user12054715 on Aug 18, 2010 4:13 PM

Hello Timo,
I am using 10.1.3g so your response is not going to help me.
However, I have another question that I have already posted on the Forum. Please help me...
Requirement:
*1. Java application should be able to write "Hello World" in the excel file, when the user opens it.*
I CAN DO THIS WITH THE FOLLOWING CODE:
HSSFWorkbook wb = new HSSFWorkbook();
HSSFSheet sheet = wb.createSheet("newSheet");
HSSFRow row = sheet.createRow(1);
row.createCell(1).setCellValue("HelloWorld!!!!!!!!!");
*2. A "Write To Excel" button on jsf page opens a dialog asking user to Save or Open the excel file. (user can save the file anywhere on his machine)*
I CAN DO THIS WITH THE FOLLOWING CODE:
In jsf:
<af:commandButton text="Download" action="#{myBackingBean.writeToExcel}" useWindow="true"/>
In backing bean:
public static void writeToExcel() throws IOException
String filename = "workbook.xls";
// //Setup the output
String contentType = "application/vnd.ms-excel";
FacesContext fc = FacesContext.getCurrentInstance();
HttpServletResponse response = (HttpServletResponse)fc.getExternalContext().getResponse();
response.setHeader("Content-disposition", "attachment; filename=" + filename);
response.setContentType(contentType);
PrintWriter out = response.getWriter();
BOTTLENECK: When the user opens the excel how do I show "HelloWorld!!!!!!!!!" ?

URGENT: Please Help....Can't make or receive calls on Z10

Hi,
I bought a Z10 about a month ago. Updated it as soon as the 10.2 was available officially and it has been running perfectly. Tonight, however, I was on a call and suddenly the audio went away. I tried disconnecting from the call but it wasn't disconnecting despite several attempts until I gave up and pressed the power button to re-boot. Since I have rebooted, I can't make or recieve calls. Everytime I try to dial a number it immediately shows call ended. I also can't recieve any calls. I have full network, and can do everything else including surf the web, sent texts and BBMs. What seems to be the problem?? Please help as it is kinda urgent
Solved!
Go to Solution.

Well wait and see till after you backup and do the battery pull. I guess you are backing up with Link and you know how to Restore so the below is a pre written file just in case and if you click one of those links you can scroll to the bottom of the page and change the country.
You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
Once Wiped reconnect your phone to your computer and install your stuff.
http://us.blackberry.com/software/desktop/blackberry-link.html
http://ca.blackberry.com/software/desktop/blackberry-link.html

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
I have this package which loads data from dim tables to a fact table , my Package runs without any problem in BIDS (2012)
I have installed SQl Server integration services on SQL and service is also running in services.msc,
the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
"http://msdn.microsoft.com/en-us/library/ms136090.aspx"
For loading my FactTable i have used a Derived columns and some lookups ,
Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
"Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
I have also found that integration services that are running on my system have version 10.0
but the BIDS have version Version 11.0.3402.0
IS this causing problem ? if yes then what i have to do ?

Hi BlaxButt,
The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
Reference:
http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
Regards,
Mike Yin
TechNet Community Support

Urgent Please - Receiving Transaction Processor Issue

Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);

Pl see you duplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support
Srini

Activation of new data in ODS results in errors. Urgent.please help...

Dear experts,
I have a problem while I load data from one ODS object into another one. I have some keyfigs which when loaded into the ODS are ok. (I mean the new data is ok) but the moment I activate the request, the keyfigures are turned automatically to zero. This peculiar performance is not observed in any of our development and certification systems. Another thing, is that the data load is an initial load and there exists nothing in the change log table as well before the load.
Any thoughts are highly appreciated. Any SAP notes on this issue??? Please help... urgent...
Kind Regards,
Shravan

Hello Prasad/Rohini,
Thanks for helping me. Yes, I checked the update rules and they are ok. The problem is not with the update rules, I guess. I delete the data first in ODS 1 and from ODS2 I load the data into ODS1. The data load is an init update. After loading the data, before activating the request, The new data is all ok. The key figure data is all as that is guided by the corresponding update rules. The moment I activate the request, the active data is all wrong. My Question is why the table containing new data is correct and after not after activating???
Since it is an initial update, I do not think change log should come into picture???
Any ideas???
Kind Regards,
Shravan

Urgent Please.... Help on https issue

Similar Messages

Maybe you are looking for