URGENT PLEASE HELP WITH A MUSIC FILE

Sorry for the urgency but this is last minute.
I need getting a music file to start playing on one slide and play through to about four slides.
What happens is the music will start playing but when I click to the next slide it stops playing.
Please Help

Yes, you will connect two separate Keynote files using the hyperlink function, found in the Hyperlink Inspector. You attach a hyperlink to text or an object (which can be set to be completely transparent), and then point the hyperlink to the other presentation. (When presenting, it is a good idea to have both presentations open, so there is no delay when you click the hyperlink.)

Similar Messages

Please Help with XML input file

I created a flash swf with AS3 and i am loading the data via XML. I have a background that needs to load and I also created a box in which I can change the color via XML. I am have problems writing the XML code. Could someone please help. I'm brand new to this so I don't know if i'm even close. Here is the xml info i have so far. thanks
<data backgroundColor="0x202020" width="400" marginTop="150" marginBottom="150"><![CDATA[COPY GOES HERE ]]>
</data>
<backgrounds switchDelay="6000">
<image allowScaling="true">background_images/image1.jpg</image>
</backgrounds>

Yes, it is possible. Unfortunately I can't provide any specifics for an XML data file because we use the "field nominated" format.
Essentially, the data file contains data definition elements and references to the form(s) that the data gets applied to. With the field nominated data file (and an XML file is probably similar) there are two basic methods to do this. One, there is a form reference followed by all the field definitions that are to be applied to that form; then if there are other forms there would be another form reference followed by the fields for that form. Two, the data file would contain data field definitions as "global" fields and this would be followed by all of the form references that these global fields would be applied to; optionally, there would be form-specific field definitions following some of the form references.
In field nominated format this looks like:
^form form-1-name.mdf
^field name
George Jones
^field amount
1234.00
^field date
01/01/2000
^form form-2-name.mdf
^field regarding
Tammy Wynette
^field occupation
country music artist
or
^global name
George Jones
^global amount
1234.00
^global regarding
Tammy Wynette
^global occupation
country music artist
^form form-1-name.mdf
^field date
01/01/2000
^form form-2-name.mdf
As I stated, I don't know how this would look within an XML file but I'm sure the concept would be the same. For the first example there might be a form reference followed by all the associated field definitions. In the second example there would be the global field references followed by the form references with the optional imbedded field reference(s). Or, at least, something similar.
Perhaps someone that uses XML files will provide appropriate samples.

Help with transferring music files from my Maxtor external HD

Can anyone please help? I have been using Windows based PCs for a majority of my life. I recently purchased a Macbook. I have thousands of songs saved on a Maxtor external hard drive. I recently connected the HD to my Macbook and was able to successfully copy over all of the photos I have saved and only few of the audio files. I checked the audio files are saved in itunes format. Why can I not copy all of my music over? Please help!

You could try something like this, if you haven't thought of it already. On the PC side make a new folder, probably at the top level, or perhaps next to the one folder that you could see on the Mac side. Or maybe inside the one folder you can see on the Mac side. Maybe create a new file in it, such as a simple text file. Then see if the new folder and file can be seen on the Mac side. If so, go back to the PC side and try copying one of the mp3 files that couldn't be seen into that new folder. Also, move one mp3, as distinct from copying. Back to the Mac side, see if you can see them.
Now, if you could see the new text file, but can't see the copied mp3, that implies the problem is somehow with the mp3 files. Or the folders they are in.
If you couldn't see the new folder, then the problem isn't the files, but (I guess) something obscure and arcane about the filesystem.
Hopefully, the new folder and its contents will be visible on the Mac side, in which case the path forward should be clear.
Do you have an extremely large number of song files in a single folder? Grasping at straws, but maybe the Mac has some dumb limit that's smaller than the equivalent limit on the PC side. I've never heard of such a thing, but when things are weird, it's a good time to think of oddball possibilities...

Pleas help with my music files and folders on an external drive

A while back, I thought I had a virus on my C drive and was advised to by an external hard drive to move all my important files and folders to. As an inexperienced computer guy, this eventually led to a problem. I have many folders that shouldn't have been moved, main folders that were broken up, duplicates of songs, some song files that are empty, etc. This doesn't just apply to iTunes folders, it includes all the computer's music folders.
Can you please help me reorganize and delete duplicates (C and external drives)? Is there a quick way to search for song files that will not work? Is there a way to wipe out all iTunes files and start over without losing the songs bought via itunes?

Welcome to the Apple Discussions. I think you're in the wrong forum. This is the iDVD forum. If I read your question correctly you probably want the iTunes for Windows forum.
OT

Please help with moving/storing files

I'm looking to move/or store music files to a external hard drive.Idealy i'd like to be able to turn on my hard drive and see all the music files on itunes.is this possible even if not,how do i load my music to the external hard drive? I have a owc mercury elite pro.Thanks

The default setting in iTunes is to store a copy of every song you add to it in the iTunes Music Folder.
If you change this setting, you can keep music anywhere you please, like an external. Go to your iTunes preferences. Click the Advanced button and select the General tab. You'll see a checkbox next to 'Copy files to iTunes Music Folder when adding to library'. Uncheck that box. Click the OK button in the bottom right corner.
Now, create a place to keep music on the external. Under the File menu, select Add To Library. Select the folder on the external and everything inside will be added. Just remember that whenever you go mobile or don't have the external connected, those songs won't be available. As obvious as this sounds, I only bring this up because I've seen people do this and their iTunes library ended up in complete chaos. They would end up with a copy on their internal and their external or would trash the wrong copy, stuff like that. These were not the most organized people though.
Does that make sense?

Urgent - please help with parsing HTML

Hi,
I'm very new to Java - i'm a biology major, actually, but taking this class for fun. Unfortunately, I'm having quite a bit of trouble with it. I've written a class that downloads a web page, converts it to a string, and then sends the string to another class, called BankRecord.
The web page string looks something like this:
bodylinks101>Prime Mortgage</a> (909) 369-1012</td><td bgcolor=#e4e4e4 valign=top align=center>4/18/2003 10:15</td><td bgcolor=#e4e4e4 valign=top align=center>5.875%
So, what I am trying to do is parse the HTML so that it returns, as a string, the appropriate information. For example, in the above HTML, I want "Prime Mortgage (909) 369-1012 4/18/2003" etc.
The above is just one record, with several fields (bank name, phone number, date). The entire web page has quite a few records, for different banks, and I need to extract all of them. I think I've figured out how to find the start and end of the first record, but I don't know how to go about looking for more records. I'm guessing a loop? Also, how do I go about distinguish between the fields in each record (i.e., how to distinguish between phone number and date fields) Here is the code I have so far:
import java.util.*;
public class BankRecord
 // Set up variables
 private String strContent;
 private Integer intPos;
 // Constructor
 public BankRecord (String strVar)
 strContent = strWebPage; // set strContent to incoming string
 intPos = 1; // initialize intPos to 1
 public getNextRecord()
 // uses findBankStart to find next bank record; if found, return true.
 private findBankStart(intPos)
 // accept an integer indicating a place to start looking for beginning of each
 // bank record. If there are no more records, return a -1; otherwise, return
 // starting position
 // Find beginning of record
 int intRecStart = strContent.indexOf("bodylinks101>",intRecStart);
 // Find end of record
 int intRecEnd = strContent.indexOf("bodylinks101>Apply",intRecEnd);
 // Find beginning of first field in record
 int FldStart = intRecStart + 13;
 // Find end of field in record
 int FldEnd = strContent.indexOf("<",intFldStart);
 public getField(intFldNum)
 // return the field asked for by number as a string.
}PLEASE help as soon as possible...thank you very much.

Thuyker,
Here are 2 approaches:
If you have a fixed format, parse via delimiters. For example, if each "record" is as follows:
NameAcct Nobalance
each "field" of the record is delimited by ... tags. Thus, you could use regular old string functions such as indexOf() to read through the HTML string, and to pick apart the data you need.
Alternatively, get a HTML parser, and let it do the work for you. A SAX-like one that I've used successfully is at http://www.quiotix.com/downloads/html-parser/
--A

Urgent Please help with a Conferencing problem in CUCM 6.1

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.

The Family pack covers upto 5 computers, other Install Disc cover one computer only.

URGENT please help with servlets

am using Jbuilder 3 and there is no servlet classs to import .imported JSDK and the javax files. but it keeps saying my class does not extend http servlet any ideas!!

I've used JBuilder3 a few times and as far as I remember the default Target jdk (version 1.2) cannot be changed or ammended and so you can't really import javax.servlet stuff.
Go to project -> properties.
You probably just need to define a new jdk version call it "JDK 12 Servlets" or something. It'll prompt you most of the way and then you just need to edit the Class path and add the javax stuff.
Alternatively you can just save the file with jbuilder and do the compiliation from the command line.
Hope this helps.

Urgent: Please help with T440p WWAN

I have a simple question since I'm planning to buy a new thinkpad t440p
Does all models have a WWAN connection ?
Resellers in my Country doesn't give any custimization options and when I've been to the shop to get it they only said that there is a sim slot under the battery does this mean that I can use mobile data as soon as I get it or what ?
in the device manage I opened network adapters and I found the following list
bluetooth device
bluetooth device
intel centrino advanced n6235
Intel ethernet connection i217-lm
there is another PCI simple communication controller unidentified device
the laptop has
core I5 extreme vpro
500gb hdd
4gb ram

Hi,
T440p laptops do not all come with a WWAN card installed. Most - but not all - have WWAN antennas installed but may or may not have a card. The SIM slot is always there as it's part of the generic T440p case.
The PSREF page may help you figure this out if you can find your MT-M (machine type-model). Otherwise post your MT-M here and someone may be able to track down the exact specs.
http://psref.lenovo.com/Product/62
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Urgent, Please help with new MIDI pedal

I just got an old awesome MIDI pedal the X-15 Ultrafoot. The pedal has two expression pedals and 10 pushbuttons/pushpads (as well as two buttons to scroll through banks, and a "mode" and "bypass" button).
What I want to is assign each pushbutton to a different parameter. I then want the expression pedal to be activated to whatever parameter I have selected. The problem is I do not know how to make the expression pedal exclusively control only the last parameter that was selected.
If somebody could help me with this I will be eternally grateful

Hi Harm,
I tried moving the BCLK slider up to 140 in the following application provided by asus (its easier than in the BIOS) and the CPU went up from about 3450mhz to 3780mhz. The DRAM only went up to 562. I dont think im understanding what you mean by 2:10 mermory timings and getting the memory up to 1800, becuase it seems that i would need to increase BCLK to much higher than it is in order to get the DRAM from 562 to 1800? Shall I try push the BCLK up higher to 150 (is it safe?)
Below is the result of moving the BCLK slider from 130 to 140. It only moved to 562 Mhz ? Please can you explain how one gets this figure to be in the range of 1800mhz to 2000mhz

Urgent - please help with blank lines

Guys need you help, please.
How do I put blank lines in a repeating frame even if there are records or no(about 20 lines with say 5 columns). I need those lines like our ruled notebooks, for the users to enter something.
Thanks
Joe.

These are blank tabular columns(20 rows 5 col). These rows might have names and other details like a master/details relationship. if there are records in details then print all those details and the blank rows to fillup 20 rows. if there are no details then print those 20 blank rows/columns. i tried doing this with one repeating frame and increasing the number of rows value to 20, but then it stops at the point of the detail rows and does not put the blank rows (lines). so had to create 2 repeating frames.

Urgent- Please help with image overlaying

Hi,
Please,please, can someone help me with an imaging issue and show me what I'm doing wrong.
I'm a swing beginner and I'm trying to create a application for a board game. Currently I'm using JLabel components to try and create jpeg pieces over a JPanel component that has the board background.
Currently I've written the code for the board background component and the pieces but can't get the image to appear on the background.
Please can someone show me what I'm doing wrong.
If someone can help me get this working, I've got 16 dollars from other posts in this forum I can give you.
Thanks.
public class BoardPanel extends JPanel {
public BoardPanel()
//Overwrite abstract painting method
public void paintComponent(Graphics g)
super.paintComponent(g);
          g.drawImage(backgroundImage,0,0,this.getWidth(), this.getHeight(), null);
private Image backgroundImage = new ImageIcon("./Board.gif").getImage();
public class PieceIcon extends JLabel {
public PieceIcon(String symbol)
System.out.println("./"+symbol+".jpg");
          pieceImage = new ImageIcon("./"+symbol+".jpg");
public void paintComponent(Graphics g)
          super.paintComponent(g);
          g.drawImage(pieceImage,playerBoardPos.getX(),playerBoardPos.getY(), this);
private Image pieceImage;
Main:
JPanel content = new JPanel();
PieceIcon testPiece = new PieceIcon("Dog");
BoardPanel boardIcon = new BoardPanel();
getContentPane().add(content, java.awt.BorderLayout.CENTER);
content.add(boardIcon, java.awt.BorderLayout.CENTER);
boardIcon.setLayout(new javax.swing.OverlayLayout(boardIcon));
boardIcon.add(testPiece);

Oh, and since you probably won't be needing a layout manager, try the following:
setLayout(null);
ChessPeice peice1 = new ChessPeice(...);
add(peice1);
peice1.setBounds(x, y, width, height);also, your ChessPeice paintComponent method should look more like:
... //in constructor
setPreferredSize(new Dimension(image.width, image.height));
setOpaque(false);
public void paintComponent(Graphics g){
   g.drawImage(...);
}Make sure that if you call the component's getSize method to determine the width and height you do it after pack has been called. If you call getSize before then, it will return 0 for the width and height values.
Another advantage to this approach is that the peices only draw in the areas they need to.
Hope this helps.

URGENT, Please help with calling one program in another

I am am trying to call Ch4Ex5 within Ch3Ex5. The teacher said it should take about 6 lines of modification within Ch3Ex5 to be able to call out Ch4Ex5. I also might need to modify Ch4Ex5 to get it to work. But I spent many hours and its due soon and I still cant figure it out. I think the teacher assigned this too early in the semester because most the kids dont know how to do it.
Here is Ch3Ex5
import java.util.*;
public class Ch3Ex5
 public static void main(String[] args)
 Scanner kb = new Scanner(System.in);
 int aCount = 0, bCount = 0, cCount = 0, dCount = 0, fCount = 0;
 int nScores = 0;
 int lowest, highest;
 int currentScore;
 int totalOfScores = 0;
 double average;
 do
 System.out.print("Enter a score (negative value to quit): ");
 currentScore = kb.nextInt();
 kb.nextLine();
 if(currentScore > 100)
 System.out.println("Scores cannot be greater than 100, please try again");
 } while(currentScore > 100);
 lowest = currentScore;
 highest = currentScore;
 while(currentScore > 0)
 nScores++;
 totalOfScores += currentScore;
 if(lowest > currentScore)
 lowest = currentScore;
 if(highest < currentScore)
 highest = currentScore;
 if((100 >= currentScore) && (currentScore >= 90)) aCount++;
 else if(currentScore >= 80) bCount++;
 else if(currentScore >= 70) cCount++;
 else if(currentScore >= 60) dCount++;
 else fCount++;
 do
 System.out.print("Enter a score (negative value to quit): ");
 currentScore = kb.nextInt();
 kb.nextLine();
 if(currentScore > 100)
 System.out.println("Scores cannot be greater than 100, please try again");
 } while(currentScore > 100);
 System.out.println("Number of scores: " + nScores);
 if(nScores > 0)
 System.out.println("Number of A's = " + aCount);
 System.out.println("Number of B's = " + bCount);
 System.out.println("Number of C's = " + cCount);
 System.out.println("Number of D's = " + dCount);
 System.out.println("Number of F's = " + fCount);
 System.out.println("Percent A's = "+(100.0*aCount/nScores));
 System.out.println("Percent B's = "+(100.0*bCount/nScores));
 System.out.println("Percent C's = "+(100.0*cCount/nScores));
 System.out.println("Percent D's = "+(100.0*dCount/nScores));
 System.out.println("Percent F's = "+(100.0*fCount/nScores));
 System.out.println("High score: " + highest);
 System.out.println("Low score: " + lowest);
 average = (double) totalOfScores / nScores;
 System.out.println("Average score = " + average);
import java.util.*;
public class Ch4Ex5
 public static void main(String[] args)
 Scanner kb = new Scanner(System.in);
 double gradeA, gradeB, gradeC, gradeD, gradeF, total;
 double aCount, bCount, cCount, dCount, fCount;
 System.out.println("Enter in the number of each grades");
 System.out.println("In this order, A's, B's, C's, D's, F's");
 gradeA = kb.nextDouble();
 gradeB = kb.nextDouble();
 gradeC = kb.nextDouble();
 gradeD = kb.nextDouble();
 gradeF = kb.nextDouble();
 System.out.println("0 10 20 30 40 50 60 70 80 90 100");
 System.out.println("| | | | | | | | | | |");
 System.out.println("***************************************************");
 total = gradeA + gradeB + gradeC + gradeD + gradeF;
 aCount = (((gradeA) / (total)) * 100);
 bCount = (((gradeB) / (total)) * 100);
 cCount = (((gradeC) / (total)) * 100);
 dCount = (((gradeD) / (total)) * 100);
 fCount = (((gradeF) / (total)) * 100);
 for (int i= 0; i < aCount; i = i +2)
 System.out.print('*');
 System.out.println("A");
 for (int i= 0; i < bCount; i = i +2)
 System.out.print('*');
 System.out.println("B");
 for (int i= 0; i < cCount; i = i +2)
 System.out.print('*');
 System.out.println("C");
 for (int i= 0; i < dCount; i = i +2)
 System.out.print('*');
 System.out.println("D");
 for (int i= 0; i < fCount; i = i +2)
 System.out.print('*');
 System.out.println("F");
}

Here's a tip for you: it doesn't really matter if you post in New to Java or Java Programming. Post once, be patient and you will get a reply. As I said keep up this style of posting and nobody will be willing to help you.
Why am I freaking out over double posting? Lets say Fred reads and replies in Thread A. Then Barney comes along and reads Thread B not knowing that Fred has already given an answer in Thread B. So Barney ends up wasting his time by posting the same answer in Thread B. Once again it aint rocket science!

Please help with this error. file not found yet it is in path. thanks

when attempting to launch app, the following error is recieved:
<Sep 30, 2004 1:30:47 PM EDT> <Error> <NodeManager> <Node manager could not find the required library, libNodeManager.so, in path - /usr/j2se/jre/lib/i386/client:/usr/j2se/jre/lib/i386:/usr/j2se/jre/../lib/i386:/export/home/bea/weblogic81/server/lib/solaris:/export/home/bea/weblogic81/server/lib/solaris/oci920_8:/usr/lib>
i have copied the noted file, libNodeManager.so to every directory in the path, set permissions to rwxrwxrwx checked case and spelling.
what am i missing?
thanks in advance

Try runnning ldd -v <program>
This will list all the libraries that you will need to have in your library path, I am not a programmer, I am assuming that libNodeManager.so might be calling another library(ies) which you cannot find.
I hope this helps.
Regards,
-Chris

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

URGENT PLEASE HELP WITH A MUSIC FILE

Similar Messages

Maybe you are looking for