Urgent-Please help with Adobe Acrobat XPro
Have the disc, and three out of the 4 programs installed, however, the most important, Adobe Acrobat XPro failed to install onto my computer. What do I do. I need this for a project I am working on.
Do you receive any specific error messages? Which operating system are you using?
Similar Messages
-
Need Help with Adobe Acrobat please
I have recently started using Adobe Acrobat. I use it to
combine several files (Word, powerpoint, and excel docs) into one
pdf, which I then email out to meeting attendees. Then, at the
meeting, I use the pdf for my AV presentation. But - my remote
slide advancer won't work for the presentors. At first I thought it
was the equipment, but then I realized the bundled pdf isn't really
a slide show, as in Powerpoint. Can anyone advise me on a solution?
I really need the presentors to be able to advance the slides, not
look to me to hit the arrow down key each time. thanks!He indicated he did not have the disk anymore. If he registered, he may be able to get a replacement from Adobe, but would have to contact them.
-
Need help with adobe acrobat 9 standard
Hi, I have window XP laptop, I reboot my computer and I install adobe acrobat 9 standard into my laptop and it was a success, how ever when I cannot accept the End user agreement. None of the button Decline, Cancel, or Accept seems to be responding at all. I have tried installed twice and I'm very frustrate.
PLEASE HELP me.. I'm just a pencil PUSHER.. have very little knowledge in computer..I have been trying what you share with me above with Version 9 and Version 8. I have two version with me, I
uninstalled version 9 like 4 times and reinstalled 4 times, did what you told me to do. It still
doesn't work.
I decided to uninstalled Version 9 and install version 8 to see if the same problem still happen. And YES its still the same problem.
I can see the entire screen of the End USER agreement, I can push on every single BUTTON on the screen, but NONE of those buttons respond when its been push.
I have been behind on my work, I cannot do my work without able to do editing to PDF.
I have tried turn off my anti virus and firewalls and everything, but nothing seems to work. I currently have version 8 install in my computer right now.
Please HELP me..
My Computer is
Dell laptop
Window XP professional 2002 -
hello, hopefully i have post the correct forum.
all my computer file even ie/firefox or chrome, when i try to open all file open with adobe, but can't not even open, so i need to uninstall the adobe reader 10 and everything goes to normal.
but i need the adobe reader on my computer, please anyone can help me to go back normal and re install the adobe
i know i did something wrong and all my exe.file can't read and somehow now it working but not the adobe
sorry, i don't kno how to explain
please help me to re install adobe reader
thank you so muchAre you using Windows 7 or Vista?
If so, recreating the user profile may help to resolve the issue. -
Urgent - please help with parsing HTML
Hi,
I'm very new to Java - i'm a biology major, actually, but taking this class for fun. Unfortunately, I'm having quite a bit of trouble with it. I've written a class that downloads a web page, converts it to a string, and then sends the string to another class, called BankRecord.
The web page string looks something like this:
bodylinks101>Prime Mortgage</a><br><span class=bodytext101>(909) 369-1012</span></td><td bgcolor=#e4e4e4 valign=top align=center><span class=bodytext101>4/18/2003</span><br><span class=bodytext101>10:15</td><td bgcolor=#e4e4e4 valign=top align=center><span class=bodytext101>5.875%</span>
So, what I am trying to do is parse the HTML so that it returns, as a string, the appropriate information. For example, in the above HTML, I want "Prime Mortgage (909) 369-1012 4/18/2003" etc.
The above is just one record, with several fields (bank name, phone number, date). The entire web page has quite a few records, for different banks, and I need to extract all of them. I think I've figured out how to find the start and end of the first record, but I don't know how to go about looking for more records. I'm guessing a loop? Also, how do I go about distinguish between the fields in each record (i.e., how to distinguish between phone number and date fields) Here is the code I have so far:
import java.util.*;
public class BankRecord
// Set up variables
private String strContent;
private Integer intPos;
// Constructor
public BankRecord (String strVar)
strContent = strWebPage; // set strContent to incoming string
intPos = 1; // initialize intPos to 1
public getNextRecord()
// uses findBankStart to find next bank record; if found, return true.
private findBankStart(intPos)
// accept an integer indicating a place to start looking for beginning of each
// bank record. If there are no more records, return a -1; otherwise, return
// starting position
// Find beginning of record
int intRecStart = strContent.indexOf("bodylinks101>",intRecStart);
// Find end of record
int intRecEnd = strContent.indexOf("bodylinks101>Apply",intRecEnd);
// Find beginning of first field in record
int FldStart = intRecStart + 13;
// Find end of field in record
int FldEnd = strContent.indexOf("<",intFldStart);
public getField(intFldNum)
// return the field asked for by number as a string.
}PLEASE help as soon as possible...thank you very much.Thuyker,
Here are 2 approaches:
If you have a fixed format, parse via delimiters. For example, if each "record" is as follows:
<span>Name</span><span>Acct No</span><span>balance</span>
each "field" of the record is delimited by <span>...</span> tags. Thus, you could use regular old string functions such as indexOf() to read through the HTML string, and to pick apart the data you need.
Alternatively, get a HTML parser, and let it do the work for you. A SAX-like one that I've used successfully is at http://www.quiotix.com/downloads/html-parser/
--A -
Urgent Please help with a Conferencing problem in CUCM 6.1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.The Family pack covers upto 5 computers, other Install Disc cover one computer only.
-
Please Help with Adobe Reader as I can't open it on most of my downloads?
I can't open my downloads from Adobe Reader.
Some are ok most can't open. Please Help.
Thanks,
Jerry
[Removed personal information]
Message was edited by: siniousWhich OS? Which Reader version?
What exactly you mean by downloads? downloaded pdf files? -
Help with Adobe Acrobat 9 Pro PDF Converter
Hello.
I am trying to convert the online homepage of Bank of America (http://www.bankofamerica.com) into a a PDF file. When the PDF file gets created, not all the background colors and graphics come out (Please see attachment). Does anyone know how to fix this problem? I would like my PDF file to look exactly as the website.
Please let me know. I really appreciate your help.
Thank you.I assume you mean something like the attached. By default the background printing is turned off in most browsers. You simply select the printer setup options and turn the background on. I got slightly different results based on different browsers,but the question is a browser issue. If you try to open this page in Acrobat (at least in AA7), you get a warning from BOA that you are using an older browser and it will not open the page. Strange, but that was the result. You are working from the browser and you are dealing with the browser setup in that case, not Acrobat.
-
Urgent: Please help with T440p WWAN
I have a simple question since I'm planning to buy a new thinkpad t440p
Does all models have a WWAN connection ?
Resellers in my Country doesn't give any custimization options and when I've been to the shop to get it they only said that there is a sim slot under the battery does this mean that I can use mobile data as soon as I get it or what ?
in the device manage I opened network adapters and I found the following list
bluetooth device
bluetooth device
intel centrino advanced n6235
Intel ethernet connection i217-lm
there is another PCI simple communication controller unidentified device
the laptop has
core I5 extreme vpro
500gb hdd
4gb ramHi,
T440p laptops do not all come with a WWAN card installed. Most - but not all - have WWAN antennas installed but may or may not have a card. The SIM slot is always there as it's part of the generic T440p case.
The PSREF page may help you figure this out if you can find your MT-M (machine type-model). Otherwise post your MT-M here and someone may be able to track down the exact specs.
http://psref.lenovo.com/Product/62
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Urgent, Please help with new MIDI pedal
I just got an old awesome MIDI pedal the X-15 Ultrafoot. The pedal has two expression pedals and 10 pushbuttons/pushpads (as well as two buttons to scroll through banks, and a "mode" and "bypass" button).
What I want to is assign each pushbutton to a different parameter. I then want the expression pedal to be activated to whatever parameter I have selected. The problem is I do not know how to make the expression pedal exclusively control only the last parameter that was selected.
If somebody could help me with this I will be eternally gratefulHi Harm,
I tried moving the BCLK slider up to 140 in the following application provided by asus (its easier than in the BIOS) and the CPU went up from about 3450mhz to 3780mhz. The DRAM only went up to 562. I dont think im understanding what you mean by 2:10 mermory timings and getting the memory up to 1800, becuase it seems that i would need to increase BCLK to much higher than it is in order to get the DRAM from 562 to 1800? Shall I try push the BCLK up higher to 150 (is it safe?)
Below is the result of moving the BCLK slider from 130 to 140. It only moved to 562 Mhz ? Please can you explain how one gets this figure to be in the range of 1800mhz to 2000mhz -
Urgent - please help with blank lines
Guys need you help, please.
How do I put blank lines in a repeating frame even if there are records or no(about 20 lines with say 5 columns). I need those lines like our ruled notebooks, for the users to enter something.
Thanks
Joe.These are blank tabular columns(20 rows 5 col). These rows might have names and other details like a master/details relationship. if there are records in details then print all those details and the blank rows to fillup 20 rows. if there are no details then print those 20 blank rows/columns. i tried doing this with one repeating frame and increasing the number of rows value to 20, but then it stops at the point of the detail rows and does not put the blank rows (lines). so had to create 2 repeating frames.
-
Urgent- Please help with image overlaying
Hi,
Please,please, can someone help me with an imaging issue and show me what I'm doing wrong.
I'm a swing beginner and I'm trying to create a application for a board game. Currently I'm using JLabel components to try and create jpeg pieces over a JPanel component that has the board background.
Currently I've written the code for the board background component and the pieces but can't get the image to appear on the background.
Please can someone show me what I'm doing wrong.
If someone can help me get this working, I've got 16 dollars from other posts in this forum I can give you.
Thanks.
public class BoardPanel extends JPanel {
public BoardPanel()
//Overwrite abstract painting method
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(backgroundImage,0,0,this.getWidth(), this.getHeight(), null);
private Image backgroundImage = new ImageIcon("./Board.gif").getImage();
public class PieceIcon extends JLabel {
public PieceIcon(String symbol)
System.out.println("./"+symbol+".jpg");
pieceImage = new ImageIcon("./"+symbol+".jpg");
public void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(pieceImage,playerBoardPos.getX(),playerBoardPos.getY(), this);
private Image pieceImage;
Main:
JPanel content = new JPanel();
PieceIcon testPiece = new PieceIcon("Dog");
BoardPanel boardIcon = new BoardPanel();
getContentPane().add(content, java.awt.BorderLayout.CENTER);
content.add(boardIcon, java.awt.BorderLayout.CENTER);
boardIcon.setLayout(new javax.swing.OverlayLayout(boardIcon));
boardIcon.add(testPiece);Oh, and since you probably won't be needing a layout manager, try the following:
setLayout(null);
ChessPeice peice1 = new ChessPeice(...);
add(peice1);
peice1.setBounds(x, y, width, height);also, your ChessPeice paintComponent method should look more like:
... //in constructor
setPreferredSize(new Dimension(image.width, image.height));
setOpaque(false);
public void paintComponent(Graphics g){
g.drawImage(...);
}Make sure that if you call the component's getSize method to determine the width and height you do it after pack has been called. If you call getSize before then, it will return 0 for the width and height values.
Another advantage to this approach is that the peices only draw in the areas they need to.
Hope this helps. -
URGENT, Please help with calling one program in another
I am am trying to call Ch4Ex5 within Ch3Ex5. The teacher said it should take about 6 lines of modification within Ch3Ex5 to be able to call out Ch4Ex5. I also might need to modify Ch4Ex5 to get it to work. But I spent many hours and its due soon and I still cant figure it out. I think the teacher assigned this too early in the semester because most the kids dont know how to do it.
Here is Ch3Ex5
import java.util.*;
public class Ch3Ex5
public static void main(String[] args)
Scanner kb = new Scanner(System.in);
int aCount = 0, bCount = 0, cCount = 0, dCount = 0, fCount = 0;
int nScores = 0;
int lowest, highest;
int currentScore;
int totalOfScores = 0;
double average;
do
System.out.print("Enter a score (negative value to quit): ");
currentScore = kb.nextInt();
kb.nextLine();
if(currentScore > 100)
System.out.println("Scores cannot be greater than 100, please try again");
} while(currentScore > 100);
lowest = currentScore;
highest = currentScore;
while(currentScore > 0)
nScores++;
totalOfScores += currentScore;
if(lowest > currentScore)
lowest = currentScore;
if(highest < currentScore)
highest = currentScore;
if((100 >= currentScore) && (currentScore >= 90)) aCount++;
else if(currentScore >= 80) bCount++;
else if(currentScore >= 70) cCount++;
else if(currentScore >= 60) dCount++;
else fCount++;
do
System.out.print("Enter a score (negative value to quit): ");
currentScore = kb.nextInt();
kb.nextLine();
if(currentScore > 100)
System.out.println("Scores cannot be greater than 100, please try again");
} while(currentScore > 100);
System.out.println("Number of scores: " + nScores);
if(nScores > 0)
System.out.println("Number of A's = " + aCount);
System.out.println("Number of B's = " + bCount);
System.out.println("Number of C's = " + cCount);
System.out.println("Number of D's = " + dCount);
System.out.println("Number of F's = " + fCount);
System.out.println("Percent A's = "+(100.0*aCount/nScores));
System.out.println("Percent B's = "+(100.0*bCount/nScores));
System.out.println("Percent C's = "+(100.0*cCount/nScores));
System.out.println("Percent D's = "+(100.0*dCount/nScores));
System.out.println("Percent F's = "+(100.0*fCount/nScores));
System.out.println("High score: " + highest);
System.out.println("Low score: " + lowest);
average = (double) totalOfScores / nScores;
System.out.println("Average score = " + average);
import java.util.*;
public class Ch4Ex5
public static void main(String[] args)
Scanner kb = new Scanner(System.in);
double gradeA, gradeB, gradeC, gradeD, gradeF, total;
double aCount, bCount, cCount, dCount, fCount;
System.out.println("Enter in the number of each grades");
System.out.println("In this order, A's, B's, C's, D's, F's");
gradeA = kb.nextDouble();
gradeB = kb.nextDouble();
gradeC = kb.nextDouble();
gradeD = kb.nextDouble();
gradeF = kb.nextDouble();
System.out.println("0 10 20 30 40 50 60 70 80 90 100");
System.out.println("| | | | | | | | | | |");
System.out.println("***************************************************");
total = gradeA + gradeB + gradeC + gradeD + gradeF;
aCount = (((gradeA) / (total)) * 100);
bCount = (((gradeB) / (total)) * 100);
cCount = (((gradeC) / (total)) * 100);
dCount = (((gradeD) / (total)) * 100);
fCount = (((gradeF) / (total)) * 100);
for (int i= 0; i < aCount; i = i +2)
System.out.print('*');
System.out.println("A");
for (int i= 0; i < bCount; i = i +2)
System.out.print('*');
System.out.println("B");
for (int i= 0; i < cCount; i = i +2)
System.out.print('*');
System.out.println("C");
for (int i= 0; i < dCount; i = i +2)
System.out.print('*');
System.out.println("D");
for (int i= 0; i < fCount; i = i +2)
System.out.print('*');
System.out.println("F");
}Here's a tip for you: it doesn't really matter if you post in New to Java or Java Programming. Post once, be patient and you will get a reply. As I said keep up this style of posting and nobody will be willing to help you.
Why am I freaking out over double posting? Lets say Fred reads and replies in Thread A. Then Barney comes along and reads Thread B not knowing that Fred has already given an answer in Thread B. So Barney ends up wasting his time by posting the same answer in Thread B. Once again it aint rocket science! -
URGENT please help with servlets
am using Jbuilder 3 and there is no servlet classs to import .imported JSDK and the javax files. but it keeps saying my class does not extend http servlet any ideas!!
I've used JBuilder3 a few times and as far as I remember the default Target jdk (version 1.2) cannot be changed or ammended and so you can't really import javax.servlet stuff.
Go to project -> properties.
You probably just need to define a new jdk version call it "JDK 12 Servlets" or something. It'll prompt you most of the way and then you just need to edit the Class path and add the javax stuff.
Alternatively you can just save the file with jbuilder and do the compiliation from the command line.
Hope this helps. -
URGENT Please help with weird behavior of test suite
Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support
Maybe you are looking for
-
Hi, I've purchased my Mac OS X Lion 2011, September, 7; updated for Mavericks couple days ago. Newly my oldest backup is dated: 2012, september 7. By accident my Macintosh HD, 1 TB was erased about a week ago. My question: can I retrieve my old Macin
-
Error in Weblogic server while deploying a sample cartridge
hi all I am getting below error while deploying a sample cartridge to the web logic. ####<Jun 27, 2012 4:32:40 PM GMT+05:30> <Warning> <cartridgemanagement> <ww021006> <AdminServer> <[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (se
-
Best way to recreate all live assets in SAP and scrap current assets
We have a situation where we have to recreate all (15000) our assets as new assets. We will have to create new assets, provide new acquisition value and new useful life and start depreciating them from scratch. Also we will have to dispose all the c
-
Processing requests in a separate worker thread created inside a servlet.
Scenario: We have an action that needs to be initiated by a servlet, but will take some time to accomplish and so the servlet should just hand it off to a separate thread for actual processing, and the servlet should just respond immediately with a r
-
Inventory Management DataSource
Hello Experts - Are there any datasources for the following fields? These fields are available in the MM03 t-code. These are related to Inventory Management. I checked 2LIS_03_BF and 2LIS_03_UM but couldn't find these. Any ideas any one? FIELD