Urgent please: Percentage issue with more data

Hi,
I am trying to calculate percentage but it is throwing error. Any help on calculating percentage type reports?
Thanks,
Sri

Your statement "Looks like VO2 is not being attached to the adv table in PFR?" holds the key to your issue.
Are you trying to attach the VO in PFR? Only a selected properties can be modified for beans in PFR. Put your code in processRequest and it should work.
--Shiv

Similar Messages

I am having a issue with getting data useage alerts for my iphone 4s

I am having a issue with getting data useage alerts for my iphone 4s from AT&T. I do not download anything huge at all.
I looked into it and figured out that the phone dials out nightly at 12:29am every night. I went into my settings and went to general..about..diagnostics and useage..then diagnostics and useage data to see this. I then clicked don't send...but I am still getting useage alerts. Can anyone help me please...
Thanks

Honestly, from reading the thread linked, they all come off as a bunch of whiney people that cannot be bothered to help themselves.
Little to nothing in that thread indicates an issue beyond inept consumers. Yes, I read several pages on the incessant gripes. Very few made any actual attempts to troubleshoot issues before whining about the "Apple issue" and those that did actual troubleshooting got their issues resolved.
So no, Apple has nothing to fix beyond a few specific devices that are experiencing hardware issues.
If you have actually put forth effort and done the basic troubleshooting, take the device to Apple for evaluation and possible replacement. Whining will get nothing accomplished.

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

Has anyone had issues with Administration\Data Import/Export\Data Import???

Has anyone had issues with Administration\Data Import/Export\Data Import???
I have a client who has recently upgraded from V2007 to V8.81. They were succesfuly using this standard function to import supplier prices to their master price list, but now it has failed?
I have looked at the file they are importing and it appears to be fine.
On closer inspection, it did contain approx 46,000 entries, so I took the first 1,000 and created a test file, which imported fine.
The only issue I found was Speed, with the test file of 1,000 records taking about 30 Mins to import. This appeared to get slower and slower the further through the file it got!
Based on this, I have estimated that the whole file would takle about 13 hours to import. The client say that when they used to run it on version 2007 it was far quicker?
In practice, it does appear to run, but the speed is the issue. Having said this, I set the whole file to run last night (over night)and this morning it had appeared to hang after about 2,307 rows, with nothing else being updated.
Has anyone any ideas or is aware of performance issues like this?
Thanks,
Ian

Always an option, but would you give your clients access to this tool?
Not sure really.
I have uploaded a copy of their database onto my test system and run the same routine. Its equally as SLOW
I can't gauage if its an issue with 8.81 that 2007 didn't have, as I only have the client's word on it, however I have no reason to disbelieve them.
Kind regards,
Ian

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

Issue with Treasury Data Source - 0CFM_DELTA_POSITIONS

Hi all,
I'm trying to use data sources 0CFM_INIT_POSITIONS & 0CFM_DELTA_POSITIONS to load treasury data.
Through INIT data source the data has been initialized and loaded the history data to BW from R/3. I'm able to see the entry in time stamp table for the INIT data source. Also the initialization has been done for DELTA_POSITIONS. But I couldn't see any entry in time stamp tabe, whereas queue has been created in RSA7.
After that we made few transactions in R/3 and trying to take those data through DELTA_POSITIONS. I checked in RSA3, system fetches more than 5000 records (which was not made after initialization) and beyond that it gives dump saying termination point has been set in the program.
Can some one please explain me the logic on which these data source works? Any other setting needs to be done?
With regards,
Muthu.

Hi Pooja,
1) It might be Database table space issue in the backround, Please checkit out with BASIS
Regards,
Marasa.

Performance issue with Oracle data source

Hi all,
I've a rather strange problem that I'm stuck on need some assistance on.
I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
[XXX]
Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
Description=DataDirect 5.2 Oracle Wire Protocol
AlternateServers=
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
ConnectionRetryCount=0
ConnectionRetryDelay=3
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=999.999.999.999
LoadBalancing=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=xxx
Password=xxx
PortNumber=1521
ProcedureRetResults=0
ReportCodePageConversionErrors=0
ServiceType=0
ServiceName=xxx
SID=
TimeEscapeMapping=0
UseCurrentSchema=1
Can anyone please advise on this lack of performance.
Thanks in advance
Bagpuss

One other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5.

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Issues with Infoview data refresh on Crystal Reports based on BW BeX query

Hi all,
We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
The data refresh would not work in Infoview.
The data refresh would work using the Crystal Reports designer gui on local machine.
regards,
Abhishek

Hi all,
This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
Please use below notes for the BW transport task of patching BOE Integration toolkit.
Refer to Note#1472104 which explains about loading the
transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
regards,
Abhishek

Inventory 0IC_C03, issue with historical data (data before Stock initializa

Hi Experts,
Inventory Management implementation we followed as bellow.
Initailization data and delta records data is showing correctly with ECC MB5B data, but historical data (2007 and 2008 till date before initialization) data is not showing correctly (stock on ECC side) but showing only difference Qunatity from Stock initialization data to date of Query.
we have done all the initial setting at BF11, Process keys and filed setup table for BX abd BF datasources, we are not using UM datasource.
1 we loaded BX data and compressed request (without tick mark at "No Marker Update)
2. initialization BF data and compressed request (with tick mark at "No Marker Update)
3 for deltas we are comperessing request on daily (without tick mark at "No Marker Update).
is this correct process
in as you mentioned for BX no need to compress ( should not compress BX request ? )
and do we need to compress delta requets ?
we have issue for historial data validation,
here is the example:
we have initilaized on may 5th 2009.
we have loaded BX data from 2007 (historical data)
for data when we see the data on january 1st 2007, on BI side it is showing value in negative sign.
on ECC it is showing different value.
for example ECC Stock on january 1st 2007 : 1500 KG
stock on Initialization may 5th 2009 : 2200 KG
on BI side it is showing as: - 700 KG
2200 - (-700) = 1500 ,
but on BI side it is not showing as 1500 KG.
(it is showing values in negative with refence to initialization stock)
can you please tell, is this the process is correct, or we did worng in data loading.
in validity table (L table) 2 records are there with SID values 0 and -1, is this correct
thanks in advance.
Regards,
Daya Sagar
Edited by: Daya Sagar on May 18, 2009 2:49 PM

Hi Anil,
Thanks for your reply.
1. You have performed the initialization on 15th May 2009.
yes
2. For the data after the stock initialization, I believe that you have either performed a full load from BF data source for the data 16th May 2009 onwards or you have not loaded any data after 15th May 2009.
for BF after stock initialization delta data, this compressed with marker update option unchecked.
If this is the case, then I think you need to
1. Load the data on 15th May (from BF data source) separately.
do you mean BF ( Material movements) 15th May data to be compressed with No Marker Update option unchecked. which we do for BX datasource ?
2. Compress it with the No Marker Update option unchecked.
3. Check the report for data on 1st Jan 2007 after this. If this is correct, then all the history data will also be correct.
After this you can perform a full load till date
here till date means May 15 th not included ?
for the data after stock initialization and then start the delta process. The data after the stock initialization(after 15th May 2009) should also be correct.
can you please clarify these doubts?
Thanks
Edited by: Daya Sagar on May 20, 2009 10:20 AM

Page coon be displayed with more data

Hi,
I am having an issue with BSP , when I display 30 or 40 records using <htmlb:tableView > it works fine
But when I try to display more records lets say 1K its showing Page cannot be displayed
Could you please help
Thanks,

I have the port range triggering on with these settings:
Application Name: https
Triggered Range: 443 - 443
Forwarded Range: 443 - 443
Check mark next to Enabled
I am using QoS with Internet Access Priority Enabled and No Acknowledgement Disabled and WMM Support Enabled
I have some Internet FIlters:
Filter Anonymous Internet Requests is Enabled
Filter IDENT (Port 113) is Enabled
And thats it.

Update row with more data - JTable with Abstracttablemodel

Hello!
I got some problems with my program, im using jtable with abstracttablemodel.
First I include content into the jtable by pressing ”New Content”, then it will pop up a dialog which I fill with information as you can see in the picture.
http://img42.imageshack.us/img42/6969/jtable.jpg
But when its done, I want to borrow it and update that row with more information as you can see if its loaned, if it is their shall be a checkbox, name and phone there. I don’t really know how to do this. Suppose I should do a similar metodh as when I’m adding and removing content. The question is how do I do that? I’ve been looking at some tips and hints on google. It seems to me that should use “fireTableRowsUpdated” but not really sure if its right and how to. When I’m borrowing the specific row I guess I need to check which row is clicked before borrowing and then fill in the information and update the table.The borrow button will also pop up a dialog with 3 fields to fill. Here is the code I wrote for adding and removing. I’ve tried with the update but its not right which I’m going to use when borrowing objects from the database. Please help!
Code from the abstracttablemodel
private ArrayList<Objects> obj = new ArrayList<Objects>();
     public void add(Objects o) {
          obj.add(o);
          fireTableRowsInserted(obj.size()-1, obj.size()-1);
     public void remove(int o) {
          int index = obj.indexOf(o);
          obj.remove(o);
          fireTableRowsDeleted(index, index);
     public void update (Objects o){
          // Not sure how to do here
          //int index = obj.indexOf(o);
          //fireTableRowsUpdated(index,index);
     }Code for the button in the main program.
if (arg.getSource() == borrow) {
// How should I do here? I need to implement the BorrowDialog, check if a row is pressed then update? How do I do that?
               BorrowDialog newLoan = new BorrowDialog(frame);
               if(table.getSelectedRow() == -1)
                    JOptionPane.showMessageDialog(frame,"Select the row before loan");
               else
                    dir.update(newLoan.getLoan());
                    table.repaint();
          }Code for BorrowDialog
public class BorrowDialog extends JDialog implements ActionListener {
        //implements JTextFields, Buttons,Labels and Panels.
     public BorrowDialog(JFrame parent) {
     //Setting buttons to panels and such
     public Objects getLoan(){
          return loan;
     public void setLoan()
                // Not sure if this is right, as I leave some fields empty, will it be empty when its updating aswell?
                // I tried with add data then it just will be a new row, when I will update a specific row
                loan = new Objects("", "" , "" , "" , "" ,"", loanField.getText(),nameField.getText(), phoneField.getText());
     public void actionPerformed(ActionEvent arg) {
          if (arg.getActionCommand().equals("Save")) {
               System.out.println("save");
               setLoan();
               dispose();
}All help is appreciated!
Edited by: iTech34 on Feb 22, 2010 3:27 AM
Edited by: iTech34 on Feb 22, 2010 3:31 AM
Edited by: iTech34 on Feb 22, 2010 3:58 AM

Look up for the rest of the code!
I explained everything on the first post, so please read there so you know the problem I got.
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
public class Database implements ActionListener {
     private final int WIDTH = 800;
     private final int HEIGHT = 800;
     private JTable table = new JTable();
     private JFrame frame = new JFrame("Database");
     private JButton addContent = new JButton("New content");
     private JButton borrow = new JButton("Borrow");
     private JButton returnObject = new JButton("Return");
     private JButton remove = new JButton("Remove");
     private JButton save = new JButton("Save");
     private JButton load = new JButton("Load");
     private JButton exit = new JButton("Exit");
     private Directory dir = new Directory();
     private JPanel buttonPanel = new JPanel();
     private JPanel mainPanel = new JPanel();
     public Database() {
          // BUTTONS
          buttonPanel.add(addContent);
          buttonPanel.add(remove);
          buttonPanel.add(borrow);
          buttonPanel.add(returnObject);
          buttonPanel.add(save);
          buttonPanel.add(load);
          buttonPanel.add(exit);
          // ACTION LISTENERS
          addContent.addActionListener(this);
          remove.addActionListener(this);
          borrow.addActionListener(this);
          returnObject.addActionListener(this);
          save.addActionListener(this);
          load.addActionListener(this);
          exit.addActionListener(this);
          // JTABLE
          table = new JTable(dir);
          table.setAutoCreateRowSorter(true);
          table.setRowHeight(25);
          JScrollPane JScroll = new JScrollPane(table);
          // PANELS
          mainPanel.setLayout(new BorderLayout());
          mainPanel.add("North", buttonPanel);
          mainPanel.add("Center", JScroll);
          // FRAME
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setSize(WIDTH, HEIGHT);
          frame.getContentPane().add(mainPanel);
          frame.pack();
          frame.setLocationRelativeTo(null);
          frame.setVisible(true);
     public void actionPerformed(ActionEvent arg) {
          if (arg.getSource() == addContent) {
               Dialog newDialog = new Dialog(frame);
               dir.add(newDialog.getItem());
          if (arg.getSource() == remove) {
               if (table.getSelectedRow() == -1)
                    JOptionPane.showMessageDialog(frame,"Select the row before remove");
               else
                    dir.remove(table.getSelectedRow());
          if (arg.getSource() == borrow) {
               // Not sure how to do here! I need to check which row I've clicked and take that row into BorrowDialog as argument i suppose.. please explain
               BorrowDialog newLoan = new BorrowDialog(frame);
               if(table.getSelectedRow() == -1)
                    JOptionPane.showMessageDialog(frame,"Select the row before loan");
               else
                    dir.update(newLoan.getLoan());
                    table.repaint();
          if (arg.getSource() == returnObject) {
          if (arg.getSource() == save) {
               dir.writeFile();
          if (arg.getSource() == load) {
               Objects[] tempObject = dir.readFile("info.txt");
               for (int i = 0; tempObject[i] != null; i++)
                         dir.add(tempObject);
          if (arg.getSource() == exit){
               frame.dispose();
     public static void main(String[] argv) {
          new Database();
}import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JDialog;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
public class BorrowDialog extends JDialog implements ActionListener {
     private final int WIDTH = 300;
     private final int HEIGHT = 400;
     private JButton exitDialog = new JButton("Exit");
     private JButton saveDialog = new JButton("Save");
     private JTextField loanField = new JTextField();
     private JTextField nameField = new JTextField();
     private JTextField phoneField = new JTextField();
     private JLabel loanLabel = new JLabel("Loan");
     private JLabel nameLabel = new JLabel("Name");
     private JLabel phoneLabel = new JLabel("Phone");
     private JPanel eastPanel = new JPanel();
     private JPanel southPanel = new JPanel();
     private JPanel westPanel = new JPanel();
     private GridLayout layout = new GridLayout(3, 1);
     private Objects loan;
     public BorrowDialog(JFrame parent) {
          super(parent, "Borrow", true);
          southPanel.add(saveDialog);
          southPanel.add(exitDialog);
          westPanel.add(loanLabel);
          eastPanel.add(loanField);
          westPanel.add(nameLabel);
          eastPanel.add(nameField);
          westPanel.add(phoneLabel);
          eastPanel.add(phoneField);
          westPanel.setLayout(layout);
          eastPanel.setLayout(layout);
          add("West", westPanel);
          add("Center", eastPanel);
          add("South", southPanel);
          saveDialog.addActionListener(this);
          exitDialog.addActionListener(this);
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          setResizable(false);
          setSize(WIDTH, HEIGHT);
          getContentPane();
          setVisible(true);
     public Objects getLoan(){
          return loan;
     public void setLoan()
          // Can I really do like this? Will the the specific row I've chosen be overwriten entirly with blank elements in the six columns as I left empty(see below, when I send the arguments into the constructor)?
          loan = new Objects("", "" , "" , "" , "" ,"", loanField.getText(),nameField.getText(), phoneField.getText());
     public void actionPerformed(ActionEvent arg) {
          if (arg.getActionCommand().equals("Save")) {
               System.out.println("save");
               setLoan();
               dispose();
          if (arg.getSource() == exitDialog) {
               dispose();
Edited by: iTech34 on Feb 22, 2010 11:19 AM
Edited by: iTech34 on Feb 22, 2010 11:20 AM

TenFourFox issues with computer date/time

I had an interesting problem tonight which I fixed and can replicate whenever I feel like. On my old Powermac I run TenFourFox which is what I assume most are doing.
The battery in my Powermac needs to be replaced, but I almost never unplug the computer so I'm never worried about the computers time, as it is always right.
Tonight I had to unplug it and when I started it up I got the "wrong time" notice but I mostly ignorred it. Everything worked well and then I tried using TenFourFox...it was an utter disaster.
It was slow, unreponsive and overall unuseable to say the least. After a lot of thinking I set the time right and it worked again, as it had before.
So after this I set the time wrong again and sure enough, TenFourFox before unuseable.
Does anyone know if there are any known issues with TenFourFoxx in the department? Could someone else try this? (Just set your clock back a few days and try to open TenFourFox)
I'm curious if I've found an issue with the app because I know for a fact ti's not hardware issues.

Running v 5.0 here, no problem in TFF changing the Time backwards, but Safari wouldn't work here until I cleared the Caches.
Some Servers are Date/Time critical & consider anything trying to connect reporting the Time off by more than a minute will refuse connections.

Issue with 0SRM_TD_IV data source delta

Hi experts,
I have an issue with the invoices numbers not updated correctly when one of invoice item is deleted in SRM.
For example:
In SRM:
Invoice number: 50001168
Invoice item : 1, quantity: 30 - deleted ( deletion indicator - x)
Invoice item : 2, quantity: 4
Invoice item : 3, quantity: 7
In standard extractor (0SRM_TD_IV) RSA3 : exactly same as SRM data.
In standard DSO (0SRIV_D3) : only invoice number and invoice item one is present, which suppose to be deleted in BI.
Invoice number: 50001168
Invoice item : 1, quantity: 30
When I did the full repair for this invoice number from SRM. I got all the 3 invoice items. It did not overwrite invoice item 1, which is deleted in SRM. the way it works in SRM is, it didn't delete the invoice item but flaged with the deletion indicator x.
Know every thing look good up to extractor RSA3. what should I do know to fix this issue? I see that we don't have tranformation rules in BI 7.0 insted we are using trnasfer rules and update rule. Please let me know.
Thanks,
Chandra

Hi Chandu,
The way I understand your issue is that,
when you do a full upload, you get the information correctly in RSA3 and DSO.
when you run a delta, you are not getting all the line items.
1) Please check whether there are any relevant SAP notes for this extractor to fix this delta issue.
2) Please check whether there is any code in the update rule or transfer rule that deletes the missing line item
Thanks,
Krishnan

Issue with Excel data-chains via SharePoint

I'm having issues with a coulpe of Excel (2010) data-chains through SharePoint at my work. When i set up a chain it shows for instance [Sheet2.xlsx] and fetches data just fine. But when I close and re-open the sheets, the chain code is changed to the
entire http-adress, such as "http://company.com/controlling/[Sheet2.xlsx], and gives a VALUE-error instead of fetching the data.
Is my problem connected to Excel or Sharepoint? And what can i do to make the chains work?
Thanks in advance, and please excuse if some of the mentioned terms are inaccurate. I use Excel in my native language (danish), but the Danish community in here is not very large :)

Hi,
Are you using some formula(Such as Vlookup) to link the Excel date which shored in the SharePoint?
If it is, we may try to use the full URL in the formula. Here are some samples, we may refer to:
http://social.msdn.microsoft.com/Forums/office/en-US/f94d25b6-749c-470c-837d-32bcf570bfd3/vlookup-to-look-at-a-excel-document-stored-on-sharepoint?forum=exceldev
http://social.msdn.microsoft.com/Forums/office/en-US/1b946199-7c65-45d1-ae1a-a845aa03d463/vlookup-issue-to-a-sharepointstored-file?forum=exceldev
Regards,
George Zhao
TechNet Community Support

Urgent please: Percentage issue with more data

Similar Messages

Maybe you are looking for