Urgent Please....!!! WAP Gateway Setup

Hi,
Our Would like to develope WAP Enabled Application.
May i know the Hardware Requirements and Software Requirements?.
How to setup WAP Gateway?
What is the Requirements for setting up WAP GATEWAY?.
Thank u
Selvan

A transceiver doing what ?
You need something people can call in (usually an isdn or modem line), the WAP gateway attached to the RAS access and add routing capabilities to the host if required.
The remaining part is of no special interest, as those are standard component and application servers.
The WAP gateway defines a gateway into the common internet architecture so there is nothing special on that side.
As far as it comes to WAP, you should be aware that several mobiles are behaving differentyl when faced with a WAP gateway, especially when trying to call in.
I had this once when trying out 3 different mobile phones from different vendors before I figured out that the WAP gateway was not the problem- all phones made trouble.
Oliver

Similar Messages

Port number from 7777 to 8080 - URGENT please

dear all,
i'm using Apex 2.2,
i wanted to change port number from 7777 to 8080,
due to Security Reasons, i have to change the port from 7777 to 8080
in which File i need to do the Changes & what are the Steps to be Followes,
http://10.33.20.6:7777/pls/apex1/apex
i wanted to change the same to
http://10.33.20.6:8080/pls/apex1/apex
please Help me out in this,
its is Very URGENT PLEASE
Many thanks

This is unlikely to be any help becaue your URL specified 'pls' in the path indicating that you are using mod_plsql, but but you might like to check that you are not inadvertently servicing your Apex instance with the embedded PL/SQL gateway.
Check to see if you are using EPG with the simple sql :
SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
If value returned is 7777 then you appear to be using EPG.
Change the port using EXEC DBMS_XDB.SETHTTPPORT(8080);
And then navigate your http://10.33.20.6:8080/pls/apex
As I said it's unlikely to be any help but wort checking all the same.

Urgent please: lost all datas while sync my new iPhone. how can i retrieve my old datas? through icloud?

urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help

to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Hi All,Please send me abap-hr material .Its urgent please.

Hi All,Please send me abap-hr material .Its urgent please.

These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification

Hi All,Where can any send me material on ABAP-HR urgent please

Hi All,Where can any send me material on ABAP-HR urgent please .
Thanks&regards.
Bharat Kumar.

Hi,
Here is a good start......
http://www.planetsap.com/hr_abap_main_page.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.
Regards

Urgent please help, this program should work

Urgent please help.
I need to solve or I will be in big trouble.
This program works at my home computer which is not networked.
The hard disk was put onto another computer at another location whihc is networked. Here my program worked on Monday 14 october but since for the last two days it is not working without me changing any code. Why do I receive this error message???
Error: 500
Location: /myJSPs/jsp/portal-project2/processviewfiles_dir.jsp
Internal Servlet Error:
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:162)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)
Root cause:
java.lang.NullPointerException
at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:132)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
at org.apache.tomcat.core.Handler.service(Handler.java:235)
at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
at java.lang.Thread.run(Thread.java:536)

foolishmatt,
The code is quit large.
to understand the program I think all the code needs to be examined.
I would need to send to you in an email.
Here is my e-mail
[email protected]
if you contact me than I can send the code to you.
Thank you in advance.

Urgent, Please help me in this problem.I am getting problem while installation

I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.

Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP]

Where can i find a wap gateway for linux?

where can i find a wap gateway for linux?
thanks itzik

You can visit website http://www.kannel.org, it's a opensource wap gateway but it;s written in C language, the JAVA sourcecode is comming soon

Sharepoint 2003 Message please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.

Hi All,
We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing wrong ?.
Environment:
SharePoint 2003 Service Pack 3
SharePoint 2003 Message :
Please wait while setup upgrades your sharepoint sites. This may take a few minutes to a few hours depending on the size of your sites.
We have applied in development box it was completed in 8 hours , but when we do the same in production it was never coming back since 5 days. Not sure what happening
Thanks in Advance
Ravishankar Maduri MCTS,MCPD,MCP

how large are your site collections and content databases?
sounds to me like you're WELL past the recommendations, which could certainly cause such an impact.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

URGENT HELP master export setup

URGENT HELP master export setup
Hi,
I tried to search in the forum before I sent this request and I did not find my answer.
I am using Production suite CS4, Windows 7. I am trying to figure out whatr is the best export setups (codec) to send to the post captioned place who works with Final cut pro. It is a 45 min documentayy shot on hxp170 that will be broadcasted on APTN channel (standard and HD). I shot 720p 24 fps (native) My files are 1.33 pixel ratio.
I want the best quality possible regardless of the size of the file.
Can Avid DNxHD codec work? (I googled and did not find a proper answer)
Also a problem: I tried to export an MXF version and an uncompressed AVI. I used Sapphire plug ins (cartoon, film scratch, glow etc) and with some export setup, it make some clips slide up or left of the screen!!! Anyone had that before?
Also: should I export 24 fps or 23.976?
Thanks a lot.

Is this a Premiere Pro question or an After Effects question? Probably better off in the AE forum...
http://forums.adobe.com/community/aftereffects_general_discussion
In reference to your first question, it might be worth asking them what they WANT. They may have a preferred pre-broadcast format, and if you can supply that, it may save your material from being transcoded (again).
MP

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

How j2me relates to WAP gateway?

Hello to everyone,
I want to know that,
Without using a wap gateway how j2me works?
According to me, Gateway is used to connect two different networks
Lets say I am calling a jsp page from MIDlet.
mobile devices belong to wireless network(j2me),
jsp(j2ee) is on internet.
How do these communicate ?
thank you in advance,
vishnu mahendra

Hi,
If u got answer for this the let me know
thanx in adv.
Raj

Urgent Please....!!! WAP Gateway Setup

Similar Messages

Maybe you are looking for