URGENT PLZ- output

Dear SAP Guru,
I need to reprint some old invoices for salesorganisation ABCD order & delivery related.
When I re-select them through transaction VF31 a lot of them go straight to the LOCL printer instead of the spooler & having waiting status.
(I maintained Condition records for output type to both Sales Org/Billing type and Sales Org/Bill type/Bill to, so I have a combination of printers (XYZ & UVW)assigned (But not LOCL printer) when the billing jobs execute thr T.C. VF31.)
In spool request there are three status 1)waiting status is with LOCL. printer. 2)Completed-with XYZ 3)----
with UVW printer.
Can someone tell me how I can prevent this or some one can suggest me why this is happening.
Points will be rewarded

Hi,
Please check it in the for sales order as below :
Menu Bar -> Extras-> output-->Header> Edit
Then select the output condition click on communication method in the printing information tab provide the required printer name in the feild logical destination and remove the check mark print immediately.
come back and save the settings .
Kindly Reward points if usefull.
Regards
vK

Similar Messages

How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help

hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
raja

Hi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss

How to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

how to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

Hi,
At Form level, write trigger for WHEN_KEY_DOWN, check for F10 and put action as NULL.
Regards,
Amol

How to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

how to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

If F10 is the Save button, than just simply program key-commit as:
begin
null;
end;BTW: never say URGENT here on the forum. It is considered very impolite!

Urgent Plz reply: java.lang.Class not found exception

Hi All,
I am novice to j2me, I am tryiing communicate data between client and Java server. I have given project name client and midlet class name FileViewer.java.
It is compiling succesfully
but when I run it , it is giving error
Unable to create Midlet FileViewer.java
java.lang.classnot found excetption: FileViewer.java
at com.sun.midp.midlet.selector.commandaction(+47)
at javax.microedition.lcdui.Display$displayaccessor.commandaction.(+152)
at com.sun.kvem.midp.lcdui.EmulEventHandler$eventloop.run(+459)
Here is the code
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import java.io.*;
public class FileViewer extends MIDlet implements CommandListener
private Display display; // Reference to Display object
private TextBox tbViewer; // View file contents in a textbox
private Command cmView; // Command to view file
private Command cmExit; // Command to exit
private String url = "http://www.corej2me.com/midpbook_v1e1/scratch/fileViewer.hlp";
public FileViewer()
display = Display.getDisplay(this);
// Define commands
cmView = new Command("View", Command.SCREEN, 2);
cmExit = new Command("Exit", Command.EXIT, 1);
tbViewer = new TextBox("Viewer", "", 250, TextField.ANY);
tbViewer.addCommand(cmView);
tbViewer.addCommand(cmExit);
tbViewer.setCommandListener(this);
public void startApp()
display.setCurrent(tbViewer);
private void viewFile() throws IOException
HttpConnection http = null;
InputStream iStrm = null;
try
// Create the connection
http = (HttpConnection) Connector.open(url);
// Client Request
// 1) Send request method
http.setRequestMethod(HttpConnection.GET);
// 2) Send header information (this header is optional)
http.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
// 3) Send body/data - No data for this request
// Server Response
// 1) Get status Line
System.out.println("Msg: " + http.getResponseMessage());
System.out.println("Code: " + http.getResponseCode());
// 2) Get header information
if (http.getResponseCode() == HttpConnection.HTTP_OK)
// 3) Get data (show the file contents)
iStrm = http.openInputStream();
int length = (int) http.getLength();
if (length > 0)
byte serverData[] = new byte[length];
iStrm.read(serverData);
tbViewer.setString(new String(serverData));
Alert alTest = new Alert("Alert Test", new String(serverData), null, null);
display.setCurrent(alTest);
finally
// Clean up
if (iStrm != null)
iStrm.close();
if (http != null)
http.close();
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command c, Displayable s)
if (c == cmView)
try
viewFile();
catch (Exception e)
System.out.println(e.toString());
else if (c == cmExit)
destroyApp(false);
notifyDestroyed();
If some body has knowledge why this error is coming plz share wiht me Its urgent .
Thanks in advance.
Thanx

No, the "-g" version just means it has the debug flag turned on when they compile it.
Your problem is CLASSPATH and how to set it properly.
Use the -classpath option on java.exe when you run. Read the javadocs on the tools to find out how.
%

Refreshing JEditorPane (Urgent) plz help

hello programmers,
i'm building an html editor:
My html editor has a split pane, the 2 pane got of the split pane are JEditorPanes, one on which i write tag and the other i display them,... thankfully all's working great, my syntax is highlighting and the html is displayed well but i've got the following problem:
when i save a html page , i wanna my browser (on the right side of the slipt pane) to display the html page... it's ok .. it displays it with the method JHTMLEditorPane.setPage(file:/// directory/ file) but the problem is that when i save the page again using the same filename... my html page on the JHTMLEditorPane stays the same... it does not update...
is their a refresh function for the JEditorPane? how can i update my JHTMLPane to reflect the changes i've brought to it? ONe thing , the page changes when i save it by aother file name..... PLz help it's very urgent!!!!!!!
Bernard

Have you tried to close and then re-open the file in your editorpane after you've saved?
It will work when you change the name because it has to open the file as new. Java can't dynamically update values upon files like C does with pointers.

Its urgent:plz tel me what is the steps move to produection oaf page.

Hi All,
I developed one oaf page.that page move to production.
i already move to produection but its not working fine.
its throw an error.
plz tell me what is the steps follow when move to production.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
thanks
Seshu.
Edited by: its urgent on Feb 8, 2012 2:31 AM

Deployement steps:
1) Copy the Class files and move to into server
We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
\myprojects
(imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
2) Run the XML import Scripts in Command Prompt
F:\OAF\jdevbin\jdev\bin
For every Page and every Lov region
3) Next Go to apps
System administrator Create Function for a page
Description tab:
Function Name : IMP_STUDENT_REGISTRATION
User Function Name: Imp Student Registration
Description : Imp Student Registration
Properties Tab:
Type: SSWA JSP function
WebHTML Tab
Function:
HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
Note: DO the same for all the pages
4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
5) Bounce the apache.
Regards
Meher Irk

Urgent plz BDC

hi gurus,
i have a problem in bdc programm there is 3 screen using transaction f-27
there is two amount field as(wrbtr,wrbtr2)
two screen are run fine but the 3 screen does't take data automatically from flat file plz help me its urgent see my codes and give me solution.
TYPES: BEGIN OF it_output,
       bldat(10) TYPE C,           "Document Date
       blart      TYPE bkpf-blart, "Document Type
       bukrs      TYPE bkpf-bukrs, "Company Code
       budat(10) TYPE C,           "Posting Date
       monat      TYPE bkpf-monat, "Period
       waers      TYPE bkpf-waers, "Currency
       xblnr      TYPE bkpf-xblnr, "Reference Field
       docid      TYPE fs006-docid, "Document ID
       newbs      TYPE rf05a-newbs, "Posting Key
       newko      TYPE rf05a-newko, "Account Code
       wrbtr(16) TYPE C,           "Amount in Document currency
       zfbdt(10) TYPE C,           "Baseline Date
       newbs2     TYPE rf05a-newbs, "Account Key2
       newko2     TYPE rf05a-newko, "Account code2
       wrbtr2(16) TYPE C,           "Amount2
       END OF it_output.
DATA lt_output TYPE it_output OCCURS 0 WITH HEADER LINE.
DATA it_bdc     LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA it_messtab LIKE bdcmsgcoll OCCURS 1 WITH HEADER LINE.
                           D A T A                                   *
DATA: message TYPE string.
DATA: p_file1 type string.
         S E L E C T - O P T I O N S / P A R A M E T E R S           *
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block0.
         A T S E L E C T I O N - S C R E E N                        *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
      mask      = space
    CHANGING
      file_name = p_file.
               S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
PERFORM upload.
PERFORM bdc.
PERFORM write_message.
*&      Form bdc
      text
FORM bdc.
LOOP AT lt_output.
    READ TABLE lt_output INDEX 1.
    PERFORM bdc_dynpro      USING 'SAPMF05A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR' 'RF05A-NEWKO'.
    PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
    PERFORM bdc_field       USING 'BKPF-BLDAT' lt_output-bldat.
    PERFORM bdc_field       USING 'BKPF-BLART' lt_output-blart.
    PERFORM bdc_field       USING 'BKPF-BUKRS' lt_output-bukrs.
    PERFORM bdc_field       USING 'BKPF-BUDAT' lt_output-budat.
    PERFORM bdc_field       USING 'BKPF-MONAT' lt_output-monat.
    PERFORM bdc_field       USING 'BKPF-WAERS' lt_output-waers.
    PERFORM bdc_field       USING 'BKPF-XBLNR' lt_output-xblnr.
    PERFORM bdc_field       USING 'FS006-DOCID' lt_output-docid.
    PERFORM bdc_field       USING 'RF05A-NEWBS' lt_output-newbs.
    PERFORM bdc_field       USING 'RF05A-NEWKO' lt_output-newko.
    PERFORM bdc_dynpro      USING 'SAPMF05A' '0302'.
    PERFORM bdc_field       USING 'BDC_CURSOR' 'RF05A-NEWKO'.
    PERFORM bdc_field       USING 'BDC_OKCODE' '/00'.
    PERFORM bdc_field       USING 'BSEG-WRBTR' lt_output-wrbtr.
    PERFORM bdc_field       USING 'BSEG-ZFBDT' lt_output-zfbdt.
    PERFORM bdc_field       USING 'RF05A-NEWBS' lt_output-newbs2."newbs2
    PERFORM bdc_field       USING 'RF05A-NEWKO' lt_output-newko2."newko2
    PERFORM bdc_dynpro      USING 'SAPMF05A' '0301'.
    PERFORM bdc_field       USING 'BDC_CURSOR' 'BSEG-WRBTR'.
    PERFORM bdc_field       USING 'BDC_OKCODE' '=BU'.
    PERFORM bdc_field       USING 'BSEG-WRBTR' lt_output-wrbtr2."wrbtr2
   PERFORM bdc_field       USING 'BSEG-MWSKZ' '**'.
   PERFORM bdc_field       USING 'BSEG-ZTERM' 'C007'.
   PERFORM bdc_field       USING 'BSEG-ZBD1T' '7'.
    CALL TRANSACTION 'F-27' USING it_bdc mode 'A'
                           MESSAGES INTO it_messtab.
    CLEAR it_bdc. REFRESH it_bdc.
ENDLOOP.
ENDFORM.                    "bdc
*&      Form write_message
      text
FORM write_message.
LOOP AT it_messtab .
    CLEAR message.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id   = sy-msgid
        lang = 'EN'
        no   = sy-msgno
        v1   = sy-msgv1
        v2   = sy-msgv2
        v3   = sy-msgv3
        v4   = sy-msgv4
      IMPORTING
        msg = message.
    CASE it_messtab-msgtyp.
      WHEN 'S'.
        WRITE:/ message.
        CLEAR message.
      WHEN 'E'.
        FORMAT COLOR 6 ON.
        WRITE:/ message.
        CLEAR message.
    ENDCASE.
ENDLOOP.
ENDFORM.                    "write_message
      FORM BDC_DYNPRO                                               *
--> PROGRAM                                                       *
--> DYNPRO                                                        *
FORM bdc_dynpro USING program dynpro.
it_bdc-program = program.
it_bdc-dynpro   = dynpro.
it_bdc-dynbegin = 'X'.
APPEND it_bdc.
CLEAR it_bdc.
ENDFORM.                    "BDC_DYNPRO
      FORM                                                          *
FORM bdc_field USING fnam fval.
it_bdc-fnam = fnam.
it_bdc-fval = fval.
APPEND it_bdc.
CLEAR it_bdc.
ENDFORM.                    "BDC_FIELD
*&      Form upload
      text
--> p1        text
<-- p2        text
FORM upload .
p_file1 = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = p_file1
   FILETYPE                      = 'DAT'
tables
    data_tab                      = lt_output
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " upload
i am also send u my flat file the client says that in amount filed of 3rd screen we will give the * asterick or other amount plz take it.
thank
plz help me.
jay
Edited by: jayant kumar on Apr 30, 2008 12:42 PM

hi jayant,
Declare '**' as a character constant and pass this constant to the Subroutine.
data : c_astrick type char2 value '**'.
PERFORM bdc_field USING 'BSEG-MWSKZ c_astrick.
Reward points if it is helpful.
Regards,
srilatha.

RECORDING WITH F-32 .......ITS URGENT PLZ HELP ME

HI GUYS
HERE IS MY REQUIREMENT
I WANT TO DO A RECORDING USING F-32 AND I HAVE TO DO THE FOLLOWING WAYS
1- ENTER ACCOUNT
2-COMPANY CODE
3-CLEARING DATE
4-OPENITEM SELETION
5-I HAVE TO SELECT THE REFERENCE RADIO BUTTON
HERE IS MY ERROR , I DONT KNOW WHAT ARE THE VALUE I HAVE TO ENTER IN THE REFERENCE FIELD AND HOW TO PROCEED ,PLZ HELP ME IT IS VERY VERY URGENT FOR ME.
THANKS A LOT
MRUTYUN

This should get you started:
FORM clearing USING    p_purch_order
                       p_cus
                       p_ven.
DATA: okcode(3).
CLEAR bdcdata.
CLEAR messtab.
REFRESH bdcdata.
REFRESH messtab.
MESSAGE s205 WITH 'Clearing A/R Invoice to Invoice Receipt.'.
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0131',       "Clear Customer: Header Data
   ' ' 'RF05A-AGKON'      bill_to,
   ' ' 'BKPF-BUDAT'       today_ch,
   ' ' 'BKPF-BUKRS'      'UOFT',
   ' ' 'BKPF-WAERS'      'CAD',
   ' ' 'RF05A-XNOPS'     'X',
   ' ' 'RF05A-XPOS1(2)' 'X',
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0730',       "Amount popup
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0730'.       "Press enter
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0710',"Clear Customer: Enter selection criteri
   ' ' 'RF05A-AGBUK'     'UOFT',
   ' ' 'RF05A-AGKON'      bill_to,
   ' ' 'RF05A-AGKOA'     'D',
   ' ' 'RF05A-XNOPS'     'X',
   ' ' 'RF05A-XMULK'     'X',
   ' ' 'RF05A-XPOS1(1)' 'X',
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0609',       "Additional Accounts popup
   ' ' 'RF05A-AGKON(1)'   p_ven,
   ' ' 'RF05A-AGKOA(1)' 'K',
   ' ' 'RF05A-XNOPS(1)' 'X'.
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      'OMX'.        "Select all
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      '/6'.         "Inactive
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      '/6'.         "Find
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '2000',       "Select search criteria popup
   ' ' 'BDC_OKCODE'      '/24'.        "Next page
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '2000',       "Select search criteria popup
   ' ' 'RF05A-XPOS1(10)' 'X'.          "Allocation
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '0731',       "Search for Allocation
   ' ' 'RF05A-SEL01(1)'   p_purch_order.                    "PO
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      'OMX'.        "Select all
PERFORM dynpro USING:
'X' 'SAPDF05X'        '1102',         "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'    '/05'.          "Active
IF p_test = space.
    okcode = '/11'.                    "save
ELSE.
    okcode = 'BS'.                     "simulate
ENDIF.
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',
   ' ' 'BDC_OKCODE'       okcode.      " save or check
IF p_test NE space.                  "exit from screen after check
    PERFORM dynpro USING:
     'X' 'SAPMF05A'        '0700',
     ' ' 'BDC_OKCODE'       '/15'.     "Save or check
    PERFORM dynpro USING:              "popup
     'X' 'SAPLSPO1'        '0200',
     ' ' 'BDC_CURSOR'      'SPOP-OPTION1'.       "choose yes
ENDIF.
CALL TRANSACTION 'F-32' USING bdcdata MODE u_mode UPDATE 'S'
                                        MESSAGES INTO messtab.
PERFORM get_message TABLES messtab USING text 'CL'.
IF text IS INITIAL.
    PERFORM batch_input USING 'F-32'.
ENDIF.
ENDFORM.                               " CLEARING
Rob

Query on FBL3N................Urgent plz help me on this.

Hi Friends
Here is my query,
I am changing the tcode FBL3N to add one extra field into it and to display data in the name1 field for the spcific entries in the selection screen,
After selecting the All item radio button and giving the range in the select-options when i am pressing F8 it is giving me the correct output,after that when i am trying to display the name1 field by selecting the ctrl+f8 button and pressing the apply button it is giving me the error as
"An internal error has arisen in the form routine ANALYZE_ACT_FIELDCAT
for program RFITEM_INC.
This is due to inconsistencies between table T021S (special fields) and
structure RFPOSEXT."
I changed everything to Y* but still it is giving the error.
Plz help me in this if someone face the same prob or someone having idea on this.
Thanks a lot in Advance
Mrutyun^

Hi Mrutyunjaya,
Did you manage to resolve this error?
Thanks and Regards
Pras

Urgent :- Sending output to SAP User's inbox as Excel Attachment.

Hi,
This is urgent requirement
Requirement Description in breif :-
1.I have a report and but when run in background, it should create an excel file and should be sent as attachment to sap inbox of the same user who is executing the report.
2.I have tried all most all function modules. the limitations were some of the F.M are not supported in background mode (which the sap it self uses) And I could able to send data to excel excel file only upto 255 chars per record. i.e these F.M's are allowing me to send a internal table but every record of 255 chars only.
3.Which is not sufficient to send my ITAB contents. and contents after 255 are truncating.
Sending output of report in Excel Format ,in Background

Hi srinivas,
check this thread
Convert output display to Excel file and Email to a set of users
Regards,
Raj

Urgent plz help me out about cartesian product

plz...its urgent,can anyone help in the following query where iam getting cartesian product,so how to get result without cartesian product
this is the query
SELECT DISTINCT MIS.segment1 "ITEM CODE",
MIS.DESCRIPTION "DESCRIP"
,MIS.Primary_uom_code "UOM",
MTL.LOT_NUMBER "LOT NUMBER"
,A.PARTY_NUMBER "CUSTOMER NUMBER",
A.PARTY_NAME "CUSTOMER NAME",
(A.ADDRESS1||A.ADDRESS2||A.ADDRESS3||A.ADDRESS4) "SHIP TO",
B.DELIVERY_DETAIL_ID "DO NO",B.SHIPPED_QUANTITY "SHIPPED QUANTITY"
,C.ULTIMATE_DROPOFF_DATE "ISSUED DATE"
,D.ORDER_NUMBER "SALES ORDER NUMBER"
,E.LINE_NUMBER "SALES ORDER LINE"
FROM MTL_SYSTEM_ITEMS MIS
,MTL_TRANSACTION_LOT_NUMBERS MTL
,HZ_PARTIES A,
WSH_DELIVERY_DETAILS B,
WSH_NEW_DELIVERIES C,
OE_ORDER_HEADERS_ALL D,
OE_ORDER_LINES_ALL E
WHERE MIS.INVENTORY_ITEM_ID=MTL.INVENTORY_ITEM_ID
AND B.INVENTORY_ITEM_ID=MIS.INVENTORY_ITEM_ID
AND A.PARTY_ID=B.CUSTOMER_ID
AND B.DELIVERY_DETAIL_ID=C.DELIVERY_ID
AND MIS.INVENTORY_ITEM_ID=E.INVENTORY_ITEM_ID
AND D.HEADER_ID=E.HEADER_ID

A lot of times when I get duplicate results, I'll do a select * and see why. Often one of those tables will have a sequenced value that could repeat several times for a combination of values.
If thats the case, you may need to add something like:
...and a.id = (select min(id)
from b
where a.col = b.col)

How to get & use xml data with jstl libraries? (URGENT PLZ)

I am using jstl to get and use xml data
I needs to perform operations on the parsed xml document with other libraries of jstl. How can i do that.
I used Dom variable to parse my document as:
<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
where my project.xml is:
<?xml version="1.0" encoding="iso-8859-1"?>
<project> <projectName>myProject</projectName> </project>
I can dislay this value in html by
<x:out select="$test/project/projectName"/>
But I need a string value sotred in variable such as <c:set var="pname" value="???">
HOW CAN I SET THIS VALUE IN CORE VARIABLE THAT IS, USING <c:set...> SO THAT IT CAN BE USED ANYWHERE IN JSP PAGE TO CONCATE RETURNED STRING IN OTHER STRING VARIABLES DEFINED BY CORE LIB?
Jessy
Message was edited by:
jessy
Message was edited by:
jessy

I believe that <c:set> should do that but i am facing problem in it. Look into this jsp scriptlet:
1-<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
2-<x:set var="ds" select="$test/project/projectName"/>
3-<x:out select="$ds"/> <br>
4-<c:set var="tt" value="${ds}" />
5-<c:out value="${tt}" />
In line 3 variable ds returns: myProject
In line 5 variable tt returns: [[projectName: null]]
perhaps on line 4 ds is storing some array to tt and i am not calling correct array element. I tried many options but still could not find solution. Plz Plz do something urgent for me. Thanks
Jessy
Message was edited by:
jessy

MySQL connectivity Problem URGENT plz

Hi
plz can any one help me... its urgent
i need java to connect to MySQL database.with mm.mysql.Driver
the following sample code is just copied from the site and made changes in hostname, dbname and username.
classpath has been given correctly for the mm.mysql.Driver package (mysql.jar).
Thanx in advance....
Result
compilation --> success
while executing i get the following Error.
java.sql.SQLException: General Error: null
     at org.git.mm.mysql.connection.<init>(Connection.java)
     at org.git.mm.mysql.Driver.connect(Driver.java)
     at java.sql.DriverManager.getConnection(DriverManager.java: 515)
     at java.sql.DriverManager.getConnection(DriverManager.java: 197)
     at JDBCDemoCreate.getConnection(JDBCDemoCreate.java: 36)
     at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 14)
java.lang.NullPointerException
     at JDBCDemoCreate.<init>(JDBCDemoCreate.java: 17)
     at JDBCDemoCreate.main(JDBCDemoCreate.java: 47)
Here is the code. can any one try this !
// JDBCDemoCreate.java
1.     import java.util.*;
2.     import java.sql.*;
3.
4.     public class JDBCDemoCreate {
5.
6.     private static final String hostname = "hostname";
7.     private static final String port = "3306";
8.     private static final String database = "dbname";
9.     private static final String username = "username";
10.     private static final String password = "";
11.
12.     public JDBCDemoCreate() {
13.
14.          Connection c = getConnection();
15.
16.          try {
17.               Statement s = (Statement)c.createStatement();
18.               s.executeUpdate("CREATE TABLE rich ( id int primary key, name char(25) )");
19.          } catch ( Exception e ) {
20.               e.printStackTrace();
21.          }
22.
23.     }
24.
25.     private Connection getConnection() {
26          // Register the driver using Class.forName()
27.          try {
28.               Class.forName("org.gjt.mm.mysql.Driver").newInstance();
29.          } catch ( Exception e ) {
30.               e.printStackTrace();
31.          }
32.
33.          // ask the DriverManager for a connection to the database
34.          Connection conn = null;
35.          try {
36.               conn = DriverManager.getConnection("jdbc:mysql://" + hostname +
37.                                                                      ":"+ port +"/" + database +
38.                                                                      "?user=" + username +
39.                                                                      "&password=" + password );
40.          } catch (Exception e) {
41.               e.printStackTrace();
42.          }
43.          return conn;
44.     }
45.
46.     public static void main( String[] args ) {
47.          new JDBCDemoCreate();
48.     }
49.}

Hi!
You can try with this code coz, i worked with this code only and then i can talk to the database.
Connection con;
Class.forName("org.gjt.mm.mysql.Driver";
con = DriverManager.getConnection("jdbc:mysql:///db?user=root&password=");
Try it out!
Queries regarding this is welcome. Either in this forum itself or u can contact in the mail, the id is
[email protected]
Regards,
dinesh

Status profilremanagement Urgent plz

hiall,
we have a requirement in campaign the user should not set the status of a campign once it is rejected
we made settings its working fine but the problem is
after rejected status there are some more status having the value higher than rejected status when they are selecting that they are able to change the all statuses including rejected status.
plz tell me how to solve this pbm
its urgent
points will be rewarded
thanks in advance
madhuri

Hi Madhuri,
Your problem can be resolved by maintaing the status numbers in the status profile:
Example of how Lowest Status Number works:
Status A has status number 30 and the 'lowest status number' 10. Status B has status number 40 and the 'lowest status number' 20.
- Once status B was active for the object, only statuses with numbers 20 or higher may be activated, even if status A is currently active.
- However, if status B has never been active, statuses with status numbers 10 or higher may be activated if status A is currently active.
Example of how Highest Status Number:
- Status A has the status number 30 and the 'highest number' 50.
- If status A is active, only statuses with status numbers 50 or less can be activated.
Therefore, while defining your status profile for the status 'Rejected', once you assign a status number for it, make user that other statuses doesn't possess the same number in both Highest Status Number and Lowest Status Number as well.
So according to your current requirement, maintain the status number accordingly to your need. This can be done while defining status profile in the following IMG path:
IMG->Customer Relationship Management->Marketing->Marketing Planning and Campaign Management->General Settings->Change Status Profile for User Status.
Wish this is useful to you
regards
Srikantan

URGENT PLZ- output

Similar Messages

Maybe you are looking for