URGENT: PO release flow doesnt trigger message to approver

Hi,
I have an urgent request for support. I copied the standard workflow WS20000075 to WS9950000013. The message to the first approver is triggered just fine. But upon setting the release, there is no message triggered to the next and last approver. Find below a screenshot of the SWEL log. I get an error message for the event SIGNIFICANTLYCHANGED: No configuration for workflow WS99500013 . In anotger system for another client I just activated the workflow and done. Don't know what causes the problem here since as far as I could see setup is the same in both systems
Any help appreciated

Hi Joris,
  First With  template WS20000075 , SIGNIFICANTLYCHANGED event has been configured and I think this event will work only for the template WS20000075. In place of copying the template WS20000075 create a new versoin of this and change the template according to your need. SAP allows change in template WS20000075.
Second Please check whether any release stretgy change has been done ?
BR,
Prakash

Similar Messages

  • Release stratergy doesnt appear.

    hi,
        I have noticed that some times when user creates a PO, release stratergy doesnt appear.
    when he deletes it, and creates a new PO with same data, the release stratergy appears.
    i am clueless why this happens??
    i would be grateful if you could throw some light.
    thanks and regards
    rahul.

    Check the data what he is inputting when release strategy appears and when release strategy doesnot appear. There may be some data different in input. Release strategy works in combination of characteristics. If one characteristic is missing, the release strategy does not appear.
    In your case look up, in classification tab of release strategy, will tell you what characteristics are maintained there and then see the PO where release strategy didnot show up, there should be one of the characteristic missing in that PO, which is not letting the release trigger.

  • Change or append message when approving directly from approval Inbox

    Hi All,
    I have a custom requirement to provide additional messages during approval of Shopping Cart and change the required on dates during approval of shopping cart.
    This has been acheived by using enhancments in BBP_DOC_CHANGE_BADI, when the approver goes to the details of the Shopping Cart and then approves the same. But I am facing  issue to append a pop-up message and makes changes to delivery date of the Shopping Cart when the approver tries to directly approve it from the approval inbox without gettign into the detail view of the shopping cart. The BAdi BBP_DOC_CHANGE_BADI is not activated at that time.
    I have tried BBP_WFL_APPROV_BADI, but that is not effective. I am trying to work with implicit enhancement points in the program BBP_BACKGROUND_APPROVAL. Albeit, I am looking for a better solution instead of forcing code in implicit enhancement point.
    Best regards
    Indrajit

    Hi,
    How about deactivating direct approve button.
    There is customizing "Determine Dynamic Columns for Business Workplace" in SRM 5.0 and old version.
    Regards,
    Masa

  • Trigger message without releasing PO

    Purchase order is subject to release strstergy.
    This is related to message out put type. My present setting for purchase order is one out put for sending to printer (ZNEU) and other one sending to third party software (ZBAD) by IDOC.
    Present working logic: Once purchase order is created both message types will trigger based on condition record but will be in yellow. Once Purchase order is released then only both will be in green (It will print and generate Idoc).
    Requirement is: Send all the Purchase Order irrespective of status released or not for out put type (ZBAD) and send all purchase orders only after releasing purchase order for output type (ZNEU).
    For out put ZBAD we need to send purchase orders immediately after creation and other ZNEU need to send only after releasing purchase order.
    Kindly suggest in this regard.

    Hi,
    Only if a PO is released, the status will change from yellow to green.  As per my knowledge, we will not be able to print a PO before it is released.
    Alternate way is the develop form (not a print program form) in a report format to print in the same way how a print out will look like.  You can schedule this report as a job.
    Sk

  • Urgent Correction: Release transport request (transport is red)

    Hello!
    Has some one experience to solve the problem bellow:
    By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
    If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
    AGR_1016 table class is 'C'. Entries are only imported to client '000'.
    AGR_1016B table class is 'C'. Entries are only imported to client '000'.
    AGR_PROF table class is 'C'. Entries are only imported to client '000'.
    AGR_USERT table class is 'C'. Entries are only imported to client '000'.
    AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
    Main import
    End date and time : 20071115141115
    Ended with return code:  ===> 8 <===
    The question is:
    I would like to copy some existing role to  cutomer's namespace Z... save the rolle and transport the role via CharM.
    Is it usual to get the error I get?
    Thank you very much!
    regards
    Thom

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • URGENT to find back an earlier message

    hope that pros can help me to solved this problem...
    i sent an urgent message to someone which i need to find back for his phone number
    but after that oni i realize that my 5530 xpress music oni keeps 20 messages sent!!!!!
    did any1 noe how to check back for older messages???
    thanks 

    If you're trying to use Find My iPhone on icloud.com, try using a different browser.  Or, if you have another iOS device, use the free Find My iPhone app.

  • Urgent : kanban process flow

    Hai pp guru's
       Any one please send the kanban process flow ppt .
    I have to submit seminar for this month end .
    very urgent.

    Hai arun
    Thank you yaaar....any other link for kanban, please forward .

  • Incorrect SIP message flow. Fantom messages

    Hi all.I have a mistirious situation. SIP server as ISP and CUCM as my PBX.
    Here is SIP message flow:
    All messages attached.
    I wonder why 101 messages are present. Thought this message flow calls succeed. And RTP are establishing.
    Anyone knows where this additional messages could take their beggining? Maybe some session subflow or firewall blocking?
    Any help appreciated

    I think that the problem is in your outgoing INVITE message.
    Your SDP body contains the "Content-Type: application/gtd" and some gateways don't understand these options.
    To prevent the insertion of gtd options try to remove the "signaling forward unconditional" under  "voice service voip".
    signaling forward {none| unconditional}
    Specifies whether or not the originating gateway (OGW) forwards the signaling payload to the terminating gateway (TGW). Keywords are as follows:
    •none—Prevent the gateway from passing the signaling payload to the TGW.
    •unconditional—Forward the signaling payload received in the OGW to the TGW, even if the attached external route server has modified the GTD payload.
    Regards.

  • Urgent (PO Release strategy)

    geting an error message " Release code  for release group  is inconsistent"
    plz help me fast
    Thank u

    Hi bhowmick,
    Please check the configuration for Release groups (Path SPRO->Materials Management->Purchasing->Purchase Requisition->Release Procedure->Procedure with Classification->Set up Procedure with Classification->Release Groups). In this, you should check 'OverReqRel'.
    I thing prb with workflow,
    Check if you are using workflow template WS20000077 (Workflow for overall release of requisition) with object type 'BUS2105'.
    Workflow template WS00000038 (Workflow for requisition release) with object type 'BUS2009', is used for releasing at the item level.
    regards,
    hareesha

  • Lenovo service trigger message on startup

    When I start up I get a window open up saying:
    Lenovo service trigger v0.1.
    Event registered successfully
    Start event successfully raised
    Unregister rrservice provider successfully!
    I'm using Windows 7 Professional.
    Can anyone help me get rid of it? I did do a search and found references to this, but I was not able to follow the suggested solutions; I'm relatively competent in relation to digging about the OS, but the suggested solution was not detailed enough for me to follow.
    Thanks for any assistance.

    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Weird-error-message-on-bootup-T400-Win7-64/...
    Here's a thread on this. Check the post above the one marked solution.  
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • When I text my daughter, the messgage goes back to my phone, and she doesnt get message

    My daughter and I are on the same plan. When I text her, I get the message back, and it never gets to her. I have tried turning my phone off and then on, and re-entering her phone number under the contacts. When she texts me, I get her message.

    I ended up trying a reset all settings under General> Reset> Reset all Settings. This seemed to work. Not sure what I did to get it the way it was going before. I have had this phone for a year and never did that before.

  • Auto submit input text doesnt show message after enter

    I have a page in jdeveloper 11 an input text with the attribute autosubmmit=true...
    When I write error entrance in the inputtext and press enter, the message is shown and the alert is given. but if I press enter again, the alert message disappears.
    What can I do For this message not to disappear?
    islam.

    Thanks for your reply. I don't know why there is another topic from me, but it is already solved
    Input text components become blank after Submit button clicked

  • Urgent : not able to see any message on SXMB_MONI

    Hi all ,
             I have created a scenario XML->XI->SAP R3 for this i have cretaed data in integration repository and in along with interface object i have created 1 mesg maping( MT--->BAPI ) and and Interface Mapping using  the same mesg mapping.
                      in integration directory i have created 2 communication channels one is of sender(adapter file) and other reciever ( adapter RFC ) and rest other things also .
    but when i am checking in SXMB_MONI i am not getting any message i am unable to figure it out where i have done mistake . when i am checking in communication monitor Sender_File_Comm_channel is working fine and Receive_RFC_Comm_channel is showing this message in log :
    Receiver channel 'RFC_Reciever' for party '', service 'BS_ACC_FLAT_R3' (internal name 'RfcClient[RFC_Reciever]')
    Client data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
    Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=300, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=XXXXX, jco.client.sysnr=00, jco.client.ashost=XX.XX.XX.XX}
    Current pool size: 0, maximum pool size : 1
    is this communication channel is fine ?
    please suggest how to check application is made correct or not ?
    thanks in advance
    Regards,
    Praveen

    Hello Praveen,
    If I understand correctly the scenario is File -- XI -- RFC and you do not see any message in SXMB_MONI.
    I would test the Sender File Adapter first before going to RFC. If the file is picked up and sent to Int Server you would see a corresponding message in SXMB_MONI.
    I would first check the Sender File Comm Channel in Comm Channel Monitoring and ensure the file id being picked up.
    In case this is not working you would get the exact error in the File Comm Channel. If this channel is working fine and you see a message id for the picked up file but the corresponding message Id is not available in SXMB_MONI, I would have a look at the queues if they are registered properly in SMQR or check if messages are stuck in any queue using SMQ1 and SMQ2 transactions. Please do the following steps and I am sure the scenario would work.
    In case you find the problem and are not able to resolve it please post it here and I can suggest something.
    Please award points if this post helps you.
    Thanks and Best Regards,
    Kanwal

  • Trigger message if file is created successfully at target

    Hi Experts,
    I have proxy-file scenario. My requirement is that when file is created successfully at target, I have to send message that it has been created.
    Please suggest me how it can be achieved

    Trigger message if file is created successfully at target
    Interface Determinations will just ensure that the message has been successfully created in XI (IE) and not in the target folder.....Interface Determination wont be able to know if sending file to Target Folder failed in AE (in channel).
    One way would be make use of BPM and the Transport Acknowledgement property of the Send step....get the ACK indication and decide if the file has been created or not.....then apply further logic.
    Lets wait for expert comments for a non-BPM solution (which even I would prefer in this case)
    It is not sure how you have to send a message, it can be via mail or sending file again
    This has to be confirmed from your business folks on how the ACK is to be sent!
    Regards,
    Abhishek.

  • Release strategy should trigger in different systems EHP7 and ECC6

    Hi All,
    At our client side some are using  ECC 6 and few are on EHP7.We need to define the release strategy in a such a way that both the user can approve the PR in cross system.For example- user A is  using ECC6 and he created PR ,now he need to take approval from his manager and manager is using the system EHP7 in such scenario-
    how does the system understand who is the approver?
    How to maintain the same user in both the system? so that approval process can not be disturb .
    What about the release code ? how to define release code in both system for single release strategy
    Thanks

    Hello,
    1st thanks for reply.
    We have ECC 6.0 as live system but getting used in only A & B country.We bought new fresh,blank system EHP7 for C county. We defined release strategy in EHP7 but we have HR module in ECC6 .So all portions are defined in ECC 6.
    For example- I am creating PR in EHP7 & last level approver is in ECC 6 .
    The issue is, in the ECC 6 system  how will he get the email notification of approval mail.?in EHP7 there is no HR module configured.
    Thanks,
    Snehal

Maybe you are looking for