Urgent Premier / avi problem

I have edited a large project in Premier 6.5 and then the original avi source file became corrupted. I reloaded the avi from DV tape but now all my edits and transitions are 7 seconds out of sync i.e. each clip has 7 seconds added to its beginning and ends 7 seconds early. Is there anything I can do other than edit the whole project again? Is there any way that I can tweak the timecode on the original avi file to bring it into line?

I just started using a Samsung SCD80 Mini DV. Today I recorded
a Gospel concert in church and it looked great on the LCD and the
TV but when connected it to the Firewire card and played it through
Premiere 6.0 It was so much darker than the LCD playback. Then I
captured it anyway and placed it on the timeline and added the
Brightness/Contrast to it and set to a brighter setting then exported
the movie and got the same thing, Dark, Dark, Dark. Do you know what
I'm doing wrong?
Joe C.

Similar Messages

Urgent- .AVI problem with quicktime

I use quicktime 7.0.3. I noticed that I cannot watch .avi files. everytime i try playing .avi files, quicktime brings me to an internet site where i can download fifferent addons or softwares to play the .avi files. i tried downloading two of them but nothing happened. why is this so? what specific codec or software shoud i download. please advise. i use a panther ibook g4. thanks.
mike

Hi,
What you need to download and install is DivX. www.divx.com you just download the free one and install it, open it once and then configure it as you wish. Then try opening the .AVI movies in Quicktime.
It should work...
Best,
ARV.-

Import avi problems

I been running premier cs3 on a single processor system for the past few
months with good results. Yes it was slow, and rendering was like watching
paint dry.
So this past week I bought a new system, with a core2 Quad 28.3 processor.
It is awesome, benchmark at 1521 ( my old system was 362). But premier is
misbehaving. When I import an avi it only sees the audio tracks, not the
video.
When this first happened I assumed that there was something wrong with the
avi file. So as a test, I dug out some avi files I'd used on my old PC (they
had worked just fine on the old work horse). But even when I import and
insert those proven quality files, no video on the timeline. If I check the
properties of the avi, the report only describes audio, no video.
I'm sure this is something simple, a setting or preference I've missed.
I'm open to any suggestions.
My new system:
motherboard - DFI - LP GK X48-T2RSB PLUS
cpu - Core2 Quad Q9550 FSB 1333 L2 Cache 12MB PCG 04A
ram - 2x2GB Crucial DDR2 800 CL4
ps - Corsair 750 Watt CMPSU-750TX 52A +12V rail
vga - (1) MSI N9600GT T2D512 512 mb
hd - (2) 500G Western Digital WD5001AALS SATA (no RAID)
CD/DVD RW LG GH22NS30 22X SATA
OS - Win XP Pro SP3
Jeff

YES! thank you, thank you, thank you I installed XviD... and all is well. By the way... I never thought I would see Premier perform at this level. I wish I had upgraded my PC sooner! Jeff <[email protected]> wrote in message news:[email protected].. > thank you for your response... the avi was encoded with xvid, and I > haven't loaded that codec to the new machine.... I was just on auto pilot, > and not thinking... > > Maybe it was the euphoria of the new PC. > > I will follow up on this > > Jeff > > > > <[email protected]> wrote in message > news:[email protected].. >> My best GUESS is that you had something installed on your old system that >> installed a CODEC compatible with your files >> >> Since you give NO information on how you obtain the files, or the CODEC >> used in the file, guessing is all anyone may do >> >> First, work through the steps here >> <a href=http://ppro.wikia.com/wiki/Troubleshooting> >> >> If your problem isn't fixed, report back with the DETAILS asked for in >> the questions at the end of that link... For question #1 see the note >> about the FREE <a href=http://www.headbands.com/gspot/> > >

Urgent!! Problems muxing .m2v files and audio!! MPEG Streamclip/Compressor

Hello!
I am under an urgent deadline to upload a short 6 min documentary clip for a client to review for screening this week. The footage was shot in 1080/60i HDV.
Usually, I find the best quality and fastest way to do this is to export directly from my FCP sequence using the '150 min Best Quality' DVD settings in compressor to get an .m2v video file and .ac3 audio file. Then I open the .m2v files in MPEG Streamclip which links it with my .ac3 file, then do 'Export MPEG with MP-2 audio". This gives me a single, muxed file that I can then upload to YouTube or Vimeo.
However, with this project, when I open up my .m2v file in MPEG Streamclip, it's recognizing the .ac3 file and I can see the info for it in the MPEG Streamclip window, but when I play the file in MPEG Streamclip or mux it, I don't hear any audio. Furthermore, after about 5 seconds into the clip, the playhead will continue moving, but the video will freeze, then maybe pick up again later. The .m2v video will play back smoothly in VLC player or Quicktime player, but not in MPEG Streamclip.
I've tried exporting different little sections of the timeline to see if maybe I had some corrupted footage or whatnot. I even exported a small clip from an older HDV project to test. But no matter where I export from, I am running into the same problem. I can bring the .m2v file and .ac3 file into DVD Studio Pro and burn a DVD with no problem, but I can't mux them. If I build the DVD file in DVD SP and try to open the .VOB file with MPEG Streamclip, I get the same problem. I even tried using a different software to mux (ffmpegX) but to no avail. When I try with ffmpegX, it either tells me I'm dropping frames, or if it works and it muxes it, when I open the MPEG file, it'll stutter at about 5 seconds in as well and I can't hear any audio, even though there is supposed to be audio in the muxed file.
I think I might have updated my Quicktime a few days ago with the system update, and maybe updated a few other things, so I don't know if this has any bearing on the problems I'm running into. But I was able just a few days ago to export HDV 1080/60i using this workflow without any problems.
I realize I have other export options, but this always seems to me to be the best quality and fastest way of doing it vs. encoding an H.264 which, on my machine is RIDICULOUSLY slow...I need to be uploading multiple versions of the cut to the client, and really need help! Thanks so much in advance!
J

what you want is an m2v program file. Export a reference copy from FCP (uncheck Make Movie Self Contained") That's very fast. Bring it into Compressor. In the settings panel find the MPEG-2 settings folder. Select Program Stream. Adjust to your liking and run. The audio and video will already be "muxed" when it's done and using compressor 3 you can set it to upload to YouTube, Mobile or similar sites.

Very Urgent?Facing Problems With Labels

Hi All,
It's Very Urgent,In My VC Application
Label Have More Than 15 Characters
I PUT Label Layout To Long Label.
My Label Name online assignement date
But Even Put Long Label, online ***.......
Please Resolve The Problem ASAP.
Thanks
SubbaRao Chinta

Hi Subbu,
I told u already its an Know issue with Flex compiler ,Even u set the label to long label it will show u only short label.
This issue is fixed with Flex2 compiler.
Use Flex2 compiler for ur application then it will dispaly the total label u want display.
Regards,
Govindu

Urgent Sql Query Problem - -Very Urgent

Hi Guys,
I need a urgent solution for a problem.I am
using the following query
select ename from emp where deptno =10
Now I will declare a bind variable and if user passes 'A'
then the query will run as it is and if he passes B
then it should run the above query with this additional clause -> birthdate - hiredate >15.
Please can any one help its very urgent

Assuming that you have a birthdate column in your emp table, the following will do what you are asking for:
VARIABLE bind_var VARCHAR2(1)
EXECUTE :bind_var := '&bind_variable'
SELECT ename FROM
(SELECT 'A' AS selection, ename FROM emp WHERE deptno = 10
UNION ALL
SELECT 'B' AS selection, ename FROM emp WHERE deptno = 10 AND birthdate - hiredate > 15)
WHERE selection = :bind_var
However, the clause "birthdate - hiredate > 15" will only retrieve rows for employees who were born more than 15 days after they were hired. I doubt that this is what you really want, since this is impossible.

Help urgently needed: bizarre problem - no audio in imported clip!

Hey there!
I have a bizarre - never the less urgent problem:
When I import some material (presentations) which I have recorded on Mini DV with my Canon MVX10i Camcorder the following problem occurs:
There is one particular presentation which somehow looses the audio during the import process!
That means the imported clip has no audio even though the audfio is on tape! Other clips before and after do not have this problem - the audio is available after the import.
A bizarre but serious problem for me. Any suggestions?
Thanks a lot in advance
Thorge

I had a similar problem. When I started the tape from the beginning no audio would import. To solve it I started the tape a few seconds in and It seemed to work.
Hope this helps.

Urgent !! :-( - Problems with CLOB

Hello all,
I want to write and read in a CLOB. Every thing is OK. But I've a problem !! :-(
When I close my clob I still have an cursor (table_...) open on my data base(Oracle 8i)
Can you help me ???
This is my class witch woks with CLOB :
import java.io.*;
import java.sql.*;
import oracle.sql.CLOB;
import oracle.jdbc.driver.OracleResultSet;
import com.pia.best.anf.*;
import com.pia.best.anf.param.*;
import com.pia.best.anf.tools.*;
public class ClobRW {
* La m�thode <code>readClob</code> lis un Clob � partir d'un
* ResultSet.
* @param rs un <code>ResultSet</code> pointant vers le Clob
* @param idx un <code>int</code> indexant le Clob dans le ResultSet
* @return une <code>String</code> �gale � la valeur du Clob
public static String readClobRS(ResultSet res, int idx) {
String s = "";
try {
CLOB c = ((OracleResultSet)res).getCLOB(idx);
if (c != null && c.length() >= 2) {
int j = 1;
while (j + 1002 <= c.length() + 1) {
s += c.getSubString(j + 2, 1000); // Les deux premiers caract�res sont bidons...
j += 1002;
s += c.getSubString(j + 2, (int) (c.length() - j - 1));
catch(SQLException e) {
Parametre.alert(0, "ClobRW.readClobRS", "Probl�me lors de la lecture du ResultSet", "", e);
return s;
* La m�thode <code>readClob</code> lis un Clob.
* @param con une <code>Connection</code> ouverture sur la base de donn�es
* @param table une <code>String</code> nommant la relation o� se trouve le Clob
* @param field une <code>String</code> nommant le champ de la relation o� se trouve le Clob
* @param location une <code>String</code> d�crivant une condition pour extraire une ligne de la relation
* @return une <code>String</code> �gale � la valeur du Clob
public static String readClob(Connection con, String table, String field, String location) {
String s = "";
try {
Statement stmt = null;
ResultSet res = null;
String query = "";
try {
stmt = con.createStatement();
query = "select " + field + " from " + table + " where " + location;
res = stmt.executeQuery(query);
if (res.next()) {
s = readClobRS(res, 1);
else {
Parametre.alert(0, "ClobRW.readClobRS", "Probl�me lors de la lecture du Clob", null, null);
catch(SQLException e) {
Parametre.alert(0, "ClobRW.readClob", "Probl�me lors de la r�cup�ration du Clob", query, e);
if (res != null) res.close();
if (stmt != null) stmt.close();
catch(SQLException e) {
Parametre.alert(0, "ClobRW.readClob", "Probl�me lors de la fermeture du statement/resultset", "", e);
return s;
* La m�thode <code>writeClob</code> permet d'�crire un Clob.
* @param con une <code>Connection</code> ouverture sur la base de donn�es
* @param table une <code>String</code> nommant la relation o� se trouve le Clob
* @param field une <code>String</code> nommant le champ de la relation o� se trouve le Clob
* @param location une <code>String</code> d�crivant une condition pour extraire une ligne de la relation
* @param s une <code>String</code> �gale � la valeur du Clob
public static void writeClob(Connection con, String table, String field, String location, String s) {
try {
con.setAutoCommit(false);
Statement stmt = null;
ResultSet res = null;
String query = "";
try {
stmt = con.createStatement();
query = "update " + table + " set " + field + " =empty_clob()" + " where " + location;
stmt.executeUpdate(query);
query = "select " + field + " from " + table + " where " + location;
res = stmt.executeQuery(query);
if (res.next()) {
CLOB c = (CLOB) res.getObject(1);
try {
OutputStream as = c.getAsciiOutputStream();
if (as != null) {
DataOutputStream dos = new DataOutputStream(as);
int i = 0, j = 1000;
while (j < s.length()) {
dos.writeUTF(s.substring(i, j));
i = j;
j+= 1000;
dos.writeUTF(s.substring(i, s.length()));
dos.flush();
dos.close();
else {
Parametre.alert(0, "ClobRW.writeClob", "Impossible de r�cup�rer un stream sur le Clob", query, null);
as.close();
catch (IOException e) {
Parametre.alert(0, "ClobRW.writeClob", "Impossible de manipuler le Clob", query, e);
else {
Parametre.alert(0, "ClobRW.writeClob", "Impossible de r�cup�rer le Clob", query, null);
catch(SQLException e) {
Parametre.alert(0, "ClobRW.writeClob", "Probl�me lors de cr�ation ou r�cup�ration du Clob", query, e);
if (res != null) res.close();
if (stmt != null) stmt.close();
con.commit();
con.setAutoCommit(true);
catch(SQLException e) {
Parametre.alert(0, "ClobRW.writeClob", "Probl�me lors du passage en transactionnel", "", e);

Sounds like you have got "hold cursor" property turned on!
This will keep the cursor open after commit!
Though it should be closed when you close the resultset

URGENT: JAVA FTP problem

Hi,
I am trying to FTP (retreive) the files from external server, that is going through some proxy.
I am using commons-net-1.0.0.jar file to do the FTP (FTPClient)
2 files must be retreived (get) from that box. The local server is UNIX solaris.
It is working fine in BC box and Dev box. The process is able to GET both the files.
But in Production (Primary box), I am able to get only one file, and that is the smaller out of 2. Not getting the larger file.
Program is not throwing any errors either.
Not sure what I need to check or how to resolve this problem.
Any help is greatly appreciated.

There is little improvement from previous time (above mentioned problem)
Now, first time when I run the program, it is working fine and I am getting the files back from external source.
But if I run the program 2nd time (repeatedly) , it is not FTPing the files and program is hanging @ the retreival (FTP retreiveFile() ) part.
i.e. If I run the program after certain gap like 3-4hrs, first time it is working fine. But starts hanging if I run 2nd time.
Do I need to set something.
Please help. Very urgent.
Thanks in advance.

URGENT - Multi-form problem

Would be great if anyone could help me with this:
Say I have two forms A and B, A has a repeating timer
which, when fires, will GO_FORM to B and B's WHEN-WINDOW-
ACTIVATED should fire and do stuff. Problem is if
the focus is already on form B at the beginning,
form A's timer expires but form B's WHEN-WINDOW-
ACTIVATED trigger doesn't fire as it IS already the
active window of the two at the time of the timer
expiration. So the stuff in B's WHEN-WINDOW-ACTIVATED
won't execute when I want it to.
Any workaround? I need a solution to this urgently.
Thanks big time in advance!!

and what makes me wonder is that looks like the focus
did temporarily switch to form A in the background,
confirmed by a check of the :SYSTEM.CURRENT_FORM and
CURSOR_ITEM etc in the WHEN-TIMER-EXPIRED trigger. But
still, if I GO_FORM back to form B, form B's WHEN-WINDOW-
ACTIVATED just won't fire.
Buggy WHEN-WINDOW-ACTIVATED trigger? Or misused?
Please, anyone? By the way, form B is launched from
a button in form A, just in case if that makes a diff.

URGENT - Flash Timer Problem

Hey there, I;m having trouble to place a timer in my flash. I'm attaching the source file.
The issue is such that I'm having 3 buttons, when triggered (RollOver) reveals an image or swf and when I rollout, it display a default random image, from an image directory. What I want is to delay the action trigger over the 3 buttons such that it fades out again in let's say 10seconds. Also, when the timer starts on any of the buttons I can rollover on any of the buttons and it overwrites the action from any previously rolled over buttons.
Does that make sense and anyone can help me please. This is urgent as I'm trying to solve this problem and deadline is end of this week.
Thanks
Ben

i generally only download and correct files if i'm hired to do so. if you want to hire me, send an email via my website ( www.kglad.com ).
if you want free help in this forum, you're more likely to receive it if you ask a question focused on a particular problem.

URGENT: ACCOUNT No. Problem

Hi,
I am facing a problem that when i check FI documents in MIGO then there is a Document number and it is stored in BSEG table. and when i check in the BSAK or BSIK table it is not present. when i check it in the tcode FBL3N THAT DOCUMENT is present and there is tick mark against it as it is in the open item coloumn.
plzzz tell me what is the functionality of it as it is really urgent to me.

Hi Abaper2008,
if you post GR with migo the document looks like the following:
Stock account debit / GR-IR account credit
   -(BSEGBSAS)          BSEGBSIS
                or
PL account debit / GR-IR account credit.
     (BSEGBSAS          BSEGBSIS
This means you have no vendor in this posting.
The invoice will be posted with miro:
GR-IR debit   /   vendors account credit
BSEGBSIS -   BSEG/BSIK
GR/IR is cleared:
(BSEG+) BSIS -> BSAS
Inoice is cleared
BSEG+ BSIK -> BSEG+BSAK
Best regards
   Horst

Urgent!! Problem using NAS 3.0 TemplateMapBasic

We are using NAS 3.0. For passing the data to the template,
we are using the TemplateMapBasic object. But due to the requirement after setting the data, once again we need to get the data from this map object and modify it. For getting the data we are using getString() method of TemplateMapBasic. The data being set to this object initially contains some Japanese characters data also. When i am retreiving the data, that time the data is coming in some unreadable format. And this
problem is only coming when i am running the code in UNIX environment. I am getting the data correctly on NT. When i tried to print the system encoding on both unix and NT, the encodings are coming as different. For Unix, the encoding is MS932, whereas for NT, the encoding is coming as SJIS. Please let me know is this problem due to some system encodings problem or it is due to TemplateMapBasic's getString() method.
If anyone faced this problem, please let me know the solution.
It is very URGENT..
Thanks..
Anshumn

I am experiencing the same problem with CCA 3.0.1 (EN) and a new SR520W (Fast Ethernet) router.
Attached is a screen shot of the point of failure in the CCA Device Configuration Wizard.
In the Wizard, clicking the Modify button in the WAN configuration page is a repeatable show stopper.
Please let me know with this bug is fixed. Until then, I will need to do the Device Configuration using a command line terminal.
Arnold

Avi problems in quicktime

My quicktime has decided not to read avi (DivX code) any more. I tried installing perian and DivX again and did not work. I have quick time 7.7 and Mac OS X (10.5.8). Does any one has a good idea to try?

Hey thanks for the program, it look is now working with some files, but with other avi files I still have the problem with the audio, any suggestions?
Aaron.

Premiere CS3 AVI Problems!! (plz help)

I'm using Adobe Premiere CS3 on my Computer and I'm trying to import this AVI footage-- Now the footage imports smoothly BUT when I put it on the timeline it shows grey/pixelated image. I can hear audio, but the video doesnt play properly. I've tried Downloading numerous codecs to fix it, but I'm not sure that's the issue...
I can preview the AVI outside of Premiere using any media player and I can edit the same footage in After Effects..
ALSO I have Adobe Premiere CS3 on my iMac and I can preview the SAME AVI file without having that pixelated problem like I do on my computer..
I'm not sure what's up with my PC's version of Adobe Premiere CS3 or what.. **This particular AVI is a Panasonic DV Codec (i think) which I have.**
This/These video(s) with that type of AVI just doesnt work with the timeline's preview whereas all the other video types work fine... (For example, I can take the footage into After Effects and export it as an AVI and THEN it plays with Premiere with slightly altered quality..)
If anyone has some idea, let me know--
Thanks,
Ari

DV Type 2 AVI
Also-- I'm messing around with it trying to figure out the issue.. I think that it could be after effects. I think the intro to the video was made with AE or motion and Premiere isnt recognizing the colors or something..
I made a little animation in After Effects and exported it and Premiere wouldnt play it-- It imported it, but it wouldnt play on the preview window..
I just put that animation into GSpot and it showed me that it's a DV Type 2 AVI ( AVI v1.0 )
So there must be something going on with the AVI v1.0 and my Premiere doesnt want to play it.. I still cant figure out the solution though.

Urgent Premier / avi problem

Similar Messages

Maybe you are looking for