Urgent ......Problem........Error RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi,
The R/3 system should be open for changes. See OSS Note #184586 - "System change option and BW". So, its description somewhat different from your situation, I got the same error while tried to create a source system until R/3 was open for changes.
Best regards,
Eugene

Similar Messages

Errors RSAR 374 RSAR 375 Data Source activation

I'm trying to load a hierarchy for the InfoObject 0MATERIAL of ERP into SCM. RFC is already configured and working correctly. From Business Content objects I have copied 0MATERIAL, 0PRODH1 (to 6) and 0PROD_HIER. I then created a Source System is connected to the ERP via RFC and then execute the activation and Replication. Replication was successful, but the activation was not completed and received an error: RSAR RSAR 374 and 375.
RFC work correctly, users are also created to correct. These errors do not give the process the Transfer Rules, which displays an error when trying to change RSAR260 Transfer Rules.
Help to find the solution to activate, or tell my other options for loading hierarchies for 0MATERIAL of ERP in SCM

Hi Alexander,
You might have checked this already , if not:
Check authorization ? when asked to remote logon with administrator user, do you use administrator user ? you may need user with administrator priviledge to create source system. sometimes error message in source system creation didn't indicate authorization issue where actually it's lack of authorization. Test the rfc destination again ? and test authorization is ok ? sm59 - choose rfc destination - menu test >> test & authorization. BWREMOTE AND ALEREMOTE back ground users
Please also check SDN thread:
Urgent ......Problem........Error RSAR 374, RSAR 375
Regards
Datta

Problem Activating Source system RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi Kishore and Edwin,
I have exactly the same problem described here, except I am creating an ECC 6 source system in BI 7.
Therefore, I am wondering if you guys can elaborate on your experience.
I get the same error message RSAR 374 and RSAR 375.
I did both connection and authorization tests for the RFC in SM59 and it's OK.
What do you mean by the "basic concept of BWREMOTE AND ALEREMOTE background users."???
Please advise.
Cheers,
SJ

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Urgent,showing error while running form..pls,help...

Hi,
I have created my own view named GP_NUIF_V and have also successfully established a Database connection,using FWK_TBX_TUTORIAL.I have developed a personal page in Oracle9i JDeveloper ,which is to fetch particular details from my view and show it .. but whenever I run my form I am continuously getting this type of error..pls,help me out ,as my project delivery is nearing..for this I am not been able to head on to registering the form..I have checked from Pl/Sql developer that my query is just running fine as I wanted it to be..I have also changed the FNDNAM in the .dbc file to my view name but it is giving me the same error..please,look at my error and suggest all other ways in how I can solve my problem ,as early as possible..
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1064)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1794)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.adf.mds.exception.MDSRuntimeException
     at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
     at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
     at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
     at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
     at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
     at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
     at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
     at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
     at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
     at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
     at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
     at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
oracle.adf.mds.exception.MDSRuntimeException
     at oracle.adf.mds.internal.MUnResolvedState.resolveState(MUnResolvedState.java:193)
     at oracle.adf.mds.internal.ElementData.resolveState(ElementData.java:509)
     at oracle.adf.mds.internal.ElementData.getUntransAttrVal(ElementData.java:922)
     at oracle.adf.mds.internal.ElementData.getAttrVal(ElementData.java:835)
     at oracle.adf.mds.internal.ElementData.getAttributeValue(ElementData.java:260)
     at oracle.adf.mds.internal.Cache.getAttribute(Cache.java:237)
     at oracle.adf.mds.internal.MetadataManagerBase.getAttributeValueInternal(MetadataManagerBase.java:1069)
     at oracle.adf.mds.internal.MElementImpl.getAttrValueOrExpression(MElementImpl.java:620)
     at oracle.adf.mds.internal.MElementImpl.getAttributeValue(MElementImpl.java:230)
     at oracle.adf.mds.MElement.getLocalRef(MElement.java:291)
     at oracle.apps.fnd.framework.webui.JRADWebBeanMetaData.getUINodeName(JRADWebBeanMetaData.java:1812)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:223)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.setMetaDataProperties(OARowLayoutHelper.java:74)
     at oracle.apps.fnd.framework.webui.OARowLayoutHelper.createWebBean(OARowLayoutHelper.java:53)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.addAkChildren(OAWebBeanContainerHelper.java:229)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.setMetaDataProperties(OAContentContainerHelper.java:74)
     at oracle.apps.fnd.framework.webui.OAContentContainerHelper.createWebBean(OAContentContainerHelper.java:55)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:782)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:469)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:460)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.addAkChildren(OAPageLayoutHelper.java:657)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:197)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.setMetaDataProperties(OAWebBeanContainerHelper.java:123)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.setMetaDataProperties(OAPageLayoutHelper.java:243)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.createWebBean(OAPageLayoutHelper.java:194)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanUsingHelper(OAWebBeanFactoryImpl.java:1046)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBeanFromCustomTables(OAWebBeanFactoryImpl.java:993)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.createWebBean(OAWebBeanFactoryImpl.java:902)
     at oracle.apps.fnd.framework.webui.OAPageBean.createRootWebBean(OAPageBean.java:3966)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:1962)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1562)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:463)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:384)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)

Don't put reposts. Follow the issue at one place Re: Urgent,showing error while running form..pls,help...
--Shiv

URGENT: Problems Loading files with SQL Loader into a BLOB column

Hi friends,
I read a lot about how to load files into blob columns, but I found errors that I can't solve.
I've read several notes in these forums, ine of them:
sql loader: loading external file into blob
and tried the solutions but without good results.
Here are some of my tests:
With this .ctl:
LOAD DATA
INFILE *
INTO TABLE mytable
REPLACE
FIELDS TERMINATED BY ','
number1 INTEGER EXTERNAL,
cad1 CHAR(250),
image1 LOBFILE(cad1) TERMINATED BY EOF
BEGINDATA
1153,/opt/oracle/appl/myapp/1.0.0/img/1153.JPG,
the error when I execute sqlldr is:
SQL*Loader-350: Syntax error at line 9.
Expecting "," or ")", found "LOBFILE".
image1 LOBFILE(cad1) TERMINATED BY EOF
^
What problem exists with LOBFILE ??
(mytable of course has number1 as a NUMBER, cad1 as VARCHAR2(250) and image1 as BLOB
I tried too with :
LOAD DATA
INFILE sample.dat
INTO TABLE mytable
FIELDS TERMINATED BY ','
(cad1 CHAR(3),
cad2 FILLER CHAR(30),
image1 BFILE(CONSTANT "/opt/oracle/appl/myapp/1.0.0/img/", cad2))
sample.dat is:
1153,1153.JPEG,
and error is:
SQL*Loader-350: Syntax error at line 6.
Expecting "," or ")", found "FILLER".
cad2 FILLER CHAR(30),
^
I tried too with a procedure, but without results...
Any idea about this error messages?
Thanks a lot.
Jose L.

> So you think that if one person put an "urgent" in the subject is screwing the problems of
other people?
Absolutely. As you are telling them "My posting is more important than yours and deserve faster attention and resolution than yours!".
So what could a typical response be? Someone telling you that his posting is more important by using the phrase "VERY URGENT!". And the next poster may decide that, no, his problem is evern more import - and use "EXTREMELY URGENT!!" as the subject. And the next one then raises the stakes by claiming his problem is "CODE RED! CRITICAL. DEFCON 4. URGENT!!!!".
Stupid, isn't it? As stupid as your instance that there is nothing wrong with your pitiful clamoring for attention to your problem by saying it is urgent.
What does the RFC's say about a meaningful title/subject in a public forum? I trust that you know what a RFC is? After all, you claim to have used public forums on the Internet for some years now..
The RFC on "public forums" is called The Usenet Article Format. This is what it has to say about the SUBJECT of a public posting:
=
The "Subject" line (formerly "Title") tells what the message is about. It should be suggestive enough of the contents of the message to enable a reader to make a decision whether to read the message based on the subject alone. If the message is submitted in response to another message (e.g., is a follow-up) the default subject should begin with the four characters "Re: ", and the "References" line is required. For follow-ups, the use of the "Summary" line is encouraged.
=
([url http://www.cs.tut.fi/~jkorpela/rfc/1036.html]RFC 1036, the Usenet article format)
Or how about [url http://www.cs.tut.fi/~jkorpela/usenet/dont.html]The seven don'ts of Usenet?
Point 7 of the Don'ts:
Don't try to catch attention by typing something foolish like "PLEASE HELP ME!!!! URGENT!!! I NEED YOUR HELP!!!" into the Subject line. Instead, type something informative (using normal mixed case!) that describes the subject matter.
Please tell me that you are not too thick to understand the basic principles of netiquette, or to argue with the RFCs that governs the very fabric of the Internet.
As for when I have an "urgent" problem? In my "real" work? I take it up with Oracle Support on Metalink by filing an iTAR/SR. As any non-idiot should do with a real-life Oracle crisis problem.
I do not barge into a public forum like you do, jump up and down, and demand quick attention by claiming that my problem is more important and more urgent and more deserving of attention that other people's problem in the very same forum.

ZEN Vision 'Hardware Problem' error mess

Model No: ZEN Vision - PMC-HD0002
Error occurred as a result of a firmware upgrade.I can access 'recovery mode' &?have attempted several further firmware upgrades.It loads, rebuilds, reboots, starts then the 'hardware problem' error message returns.The device is currently stating, in 'recovery mode', that the following firmware is loaded v.42.0_0.0.9.I have removed all data (format all), run 'clean up' & 'rebooted' then upgraded firmware but with no success.?Any ideas will be greatly received & appreciated.

hi.
i have exactly the same problem.
did you manage to find any answer?
how did you access the recovery mode?
your response will be greatly appreciated.
thanks!

Ipod cannot be restored because of unknown problem (Error 1437)"

One day when I was listening my ipod when I pass the other song ipod screen freeze and I reset it and when its open all the songs and videos are gone Then I connect it to my laptop and I took the Error says "iTunes has detected an iPod that appears to be corrupted" When I try to restore it through itunes, I take an error message says "ipod cannot be restored because of unknown problem (Error 1437)" And the ipod is not recognised in itunes after this message..Then I searched the help files; I updated my itunes to the latest version, also restart my computer and change the usb port Im trying.. Also tried to update the serial control drivers but nothing's changed..One time I tried to do it in safe mode.. Nothings Changes... I everything I found in apple help files.. I see lots of unanswered questions in many months but Please HELP

Well it could be dead forever or you might just need some simple repairs. The problem i have seen in some is that when dropped the hard drive either comes loose (easy to fix) or gets killed (little more expensive).
There could be other problems but i have seen those problems more often than something drastic like the whole board dieing.
try here for repairs
http://www.iresq.com/

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

Urgent problem, mate

Hello experts:
     Thank you in advance for all your replies.
     there is a function--- ENQUEUE_EFPAYR failed with exception 8, who know the possible reason,   how a function raise an exception, how to locate where it is , search by raise ? please
help me with that urgent problem .
      couldn't thank you more.
Best regards.

Hi,
The ecxeption no 8 corresponds to the 8th exception that is listed in the exception tab of the FM when you open the FM in SE37.
Exceptions are raised inside the FM . The syntax is 'RAISE <EXCP> .' where <EXCP> is the name of exception.
For the enque FMs if you search for term 'raise' in the code you may not find the place where it is raised, as this FM calls some forms within it that are not part of the function groups so cannot be searched directly. You can debug it with breakpoint at statement 'RAISE' to locate it.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

*URGENT* Problem in SOP

Dear gurus,
We face a very urgent problem in our Sales & Operations Planning, any help is greatly appreciated.
We created a planningtype based on an underlying infostructure. (trx MC8A)
The problem we now have is that some numbers that we see in the infostructure table (using trx SE16), do not appear in the planningtype with trx MC94/MC95.
How is this possible??
Thanks for your thoughts!
Rgds, AJ

Problem solved itself. As always: masterdata..!

Urgent ......Problem........Error RSAR 374, RSAR 375

Similar Messages

Maybe you are looking for