Urgent problem for Oracle Agile 9.2.2.4

HI,
I have installed Oracle Agile 9.2.2.4 which is downloaded from eDelivery.oracle.com on my computer.
but now, the problem is when I login the Agile, no components displayed in the left pane, but global search, bookmarks. I have enabled all modules in admin tab/server configuration.
I'm urgent to know what the problem is. Does anyone know? Please help!

you are a lucky guys...I have tried to install Agile PLM, again and again. but never successful...I'm so tired and disappointed to read the help documents... The process of installation always hung when installing the Oracle Application Server for Agile PLM.
it's so difficult to love this software...

Similar Messages

JDriver Problem for Oracle

Hi,
When Weblogic is starting up, it tries to load Jdriver for oracle.
Suddenly in my machine, while WLS 6.1 sp1, is starting up, it says,
Starting Loading jDriver/Oracle ....
and it sits there for ever.
The server is not booting up then. Its stuck.
Thanks,
Magesh.

Magesh wrote:
>
Hi,
When Weblogic is starting up, it tries to load Jdriver for oracle.
Suddenly in my machine, while WLS 6.1 sp1, is starting up, it says,
Starting Loading jDriver/Oracle ....
and it sits there for ever.
The server is not booting up then. Its stuck.
Thanks,
Magesh.get us a thread dump to see what the server is doing. What OS is this
on, and what version of the Oracle client do you have installed on the
box, and what version of the DBMS are you connecting to?
Try the utility utils.dbping. What does it do when trying to
connect to Oracle using our driver?
thanks,
Joe

Minor but urgent problem - for advise pls.

Dear forum friends.
I have accidentally pressed some combination of buttons on my Mac Air and now the entire font of the keyboard has been changed to some strange symbols.
I cannot type any alphabets or numbers anymore. I rebooted I rebooted it but now I cannot even enter the password.
Please advise the basic keyboard combination button to change font styles.
This is a minor but urgent issue for me.
Thanks.

Holding down the shift key while restarting takes me to the login screen. However since the keyboard is altered, out does not enter the desired characters for the password.
Restarting without holding the shift key takes me to two options, Macintosh HD and Recovery HD.
Macintosh Hd takes me to the same login screen as above.
Recovery Hd takes me to below for options :
Restore from Time Machine backup
Reinstall Mac Os
Online help
Disk Utility (repair or erase)
Reinstall Mac os is not working. It says it cannot continue and to contact Apple Care. Why is that? Because I am out of warranty period? I connected to wifi.
The disk utility option shows four items.
121 GB Apple ssd
Macintosh Hd
disk 1
Mac os base system.
Options include erase, restore, etc and to copy which image to which disk.
Please advise.
(what kind of a keyboard setting is this which doesn't undo by restarting. And even doesn't let one login.

Installation problem for oracle 9i on linux

The following error I have got during installation of Oracle 9i (9.2.0.1.0) downloaded enterprise version for Linux from otn site.
Red Hat Linux Release 9 (Kernel 2.4.20-8)
1. Could not copy /home/oracle/OraHome1/Apache/Apache/conf/ssl.key/server.key
2. Could not Copy
/home/oracle/Orahome1/ldap/odi/conf/idfsample.map.master
During linking error given with
/home/oracle/oraHome1/network/lib/ins_oemagent.mk
. . .. ... ........ctx/lib/ins_ctx.mk
........ .... .......Apache/Apache/ports.ini
I have ignored all above and proceed...
at the time database creation I got the following problem
ORA-27123 : unable to attach to shared memory segment.
But
I have entered into /etc/sysctl.conf
kernel.SHMMAX=1073741824
Please give me a quick Reply

Refer to the following web site which has excellent tips and workarounds for most problems you will find installing Oracle on RedHat:
www.puschitz.com

Sun One application server connection problem for Oracle DB

On our project in live environments we have six Sun One application servers that have been configured to connect to RAC Oracle database using OCI drivers. ( JDBC thick driver)
Sun one application server : Version 7.0.0
Oracle Database : Version 9.2.0.4.0
Following are two scenarios where Sun one server receives an error while attempting to perform any DML operations onto the database e.g. when you will try to send a insert/update msg through sun One.
Case 1: - If the Oracle package/procedure/function is compiled using �Alter package/function/procedure....� command
problem
Any attempt to perform a DML operation using RMI calls though Sun one application server with already established oracle connection will fail.
Sun One application server needs to be bounced to get an up-to-date state of the package.
Case 2: If the Oracle package/procedure/function is compiled using �Create or Replace package/function/procedure....� command
problem
First attempt to perform any DML operation using RMI calls though Sun one application server with already established oracle connection will always fail. Any subsequent attempts will be successful.
We are using JDBC OCI think drivers. I tried flushing Shared pool at the Oracle side but it didn't help. For some reason Sun One seems to Cache the session information for already establised connections with Oracle database. As its live system we don't want any outage. i.e we know bouncing oracle app server will solve the problem.
So just wondering is there way/workaround to make aware the already estlised connection from sun one appserver to Oracle DB about changed packages/proceduress in the DB?
Any thoughts on this would be much appreciated.
txns
Ravi

Forgot one thing: when I use remote debugging , it works.

JDBC Driver Problems for Oracle 10

Trying to setup an OCI driver in our system but keep getting this response.
INFO 2005-12-02 08:49:40,868 [STDOUT] java.lang.UnsatisfiedLinkError: C:\_EP\coldfusion\cfusion\lib\ocijdbc10.dll: The specified procedure could not be found
INFO 2005-12-02 09:02:35,008 [STDOUT] A non-SQL error occurred while requesting a connection from DEVX2
INFO 2005-12-02 09:02:35,008 [STDOUT] Timed out trying to establish connection
That file exists on that path, so I'm not sure if this message means that it can't find that dll, or a procedure within that dll.
If I set it up to use the thin client... no problems. This is very strange. ojdbc14.jar is on the classpath as well as all the DLLs needed, and I have the client installed on my machine.
What else could I possibly need?

Prior to 10g, Oracle claimed to require the entire Oracle client installation for the OCI driver to work; allegedly you couldn't just pick up the dlls you needed...
With 10g, they've supplied a stripped down "Instant Client" that has just the bare bones stuff (it's still 10MB, zipped):
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
They still recommend that you install the client and add an entry to your classpath and path variables rather than trying to pick and choose what you need. I believe the 10g OCI driver is still dependent on an Oracle Net installation (which would be part of the Instant Client install, if required).
BTW, last I knew (last year), Macromedia was discouraging the use of the OCI driver with Cold Fusion.
Personally, I'm not aware of any significant benefits the OCI driver would provide a Cold Fusion installation. The only good reasons I've ever heard of for using the OCI driver are: to connect via IPC instead of TCP/IP (requires the database be running on the same server as the Java program), to use TAF, to use the OCI connection pooling for connection multiplexing, to take advantage of some slight performance gains with stored procedure calls. While not an expert in this area, I think only the first could possibly apply to use with Cold Fusion. The myth that OCI is substantially faster for standard SQL (non stored procedures) has been repeatedly debunked.

JDBC Connection Driver Problem for Oracle in a J2EE servlet/class

Hi,
I am having a big problem with setting up a JDBC connection with my oracle database, I have been trying to fix it for about 6 hours now with no joy, I have read that many threads about JDBC, class paths etc.. that i dont know which way is up any more!!
Here is the issue:
(Please bare in mind that I am new to this when posting replies)
I have a Web Application set up as a project in the netbeans IDE. I have a servlet which creates a new object call dbaseFunc which is a public class I have wrote and within this class is a function called getAppConfigCon(). The code for this function is below:
public Connection getAppConfigCon()
Connection con = null;
try
Class.forName("oracle.jdbc.driver.OracleDriver");
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","cavdev", "password");
catch (SQLException e)
e.printStackTrace();
catch (ClassNotFoundException e)
e.printStackTrace(System.out);
return con;
The database is Oracle XE and is installed on the same machine I am developing on, the database is up and I can connect to it via the netbeans IDE database interface after telling it where the driver is (C:\oracle\product\10.2.0\client_1\jdbc\lib\ojdbc14.zip). Obviously this is just IDE functionality and allows you to browse the database objects from netbeans however I now need to know how to tell the jre where the drivers are, right??
Well like I said multiple forums led me down the classpath route and I have a system environment variable called CLASSPATH set up with the oracle jdbc driver specified as its value, when i run the set command from the command line ( I am running Windows XP Pro) I can see the class path entry in the output as follows:
CLASSPATH=C:\oracle\product\10.2.0\client_1\jdbc\lib\ojdbc14.zip
When I try to run my web app it doesnt assign the connection object with a value, i.e. when i was debugging my con object was null after calling the method mentioned above. After some time debugging i found a ClassNotFoundException was being thrown when the following command was executed:
Class.forName("oracle.jdbc.driver.OracleDriver");
Which I understand is because their is a problem with the class path but what is the problem??? The IDE likes the driver so why doesnt the jre.
I am runnin jdk and jre 1.5, an Oracle XE Database using the netbeans environment.
Some one please help me, I have spent far to much time on this rather than actually working on my project!!!!
Thanks
Keith

Well After 10.5 hrs I actually sorted this myself, the two problems that were throwing me were this:
1. Netbeans does not stop the tomcat server when it finishes running the app, you either have to stop the server from the menu or exit netbeans, until the server restarts it will not pick up on any driver files you add to common/lib
2. You are very right Kiros tomcat does not do .zip files!!!!~~~###
In order to sort this I had to add the oracle driver as a package to my project using the netbeans ide Project > Libraries > New Jar file, this allowed me to access the oracle classes. Then I had to set the server up to deal with the drivers as well, this meant adding the .jar file (not the latest .zip as it wont work) to the bundled tomcat common lib directory and restart the server via the ide (using the start/stop bat files in the tomcat conf directory doesnt work for some reason when its bundled with netbeans!)
Thanks for the help guys but in the end it took 10 hrs a lot of reading and 2 bottles of lucozade to keep the brain goin.
Keith

Installation problem for oracle SOA Suite11gR1

Hi,
I am new to oracle fusion middleware product. Now trying to install SOA Suite 11g R1
Installation of Oracle SOA 11g R1 is five step process where step 1 & 2 are same for most of Fusion Middleware 11g products (WebCenter, Identity Management..)
1. Install Oracle Database (repository for SOA Suite) and load Oracle SOA suite repository using rcu (Repository Creation Utility).
2. Install Oracle WebLogic Server 11gR1 (10.3.1)
3. Install Oracle SOA Suite 11g R1 (11.1.1)
4. Configure SOA Suite (soa & bam) by creating domain - Administration and Managed Server in WebLogic
5. Start Administration & Managed Server (soa_server1, bam_server1) for SOA 11g R1
I tried to install one by one. When I run repository creation utility in oracle DB 11g it failed so unable to proceed further. I tried 3 times all failed.
Any help on installation process will be much appreciated.
Thanks,
Sunam

Hi,
What is the error you are getting in your RCU?
If it is related to some processes, then you need to adjust your db processes value.
Login to DB as sysdba. Run this following command.
SQL > conn sys as sysdba
SQL >alter system set processes = 2300 scope = spfile;
SQL > shutdown immediate
SQL > startup
Then retry with RCU.
Let me know if this helps!!!
Regards,
Baskar Mookkan

Installation problem for Oracle 9.2 on Win XP pro

This is what I have done so far:
1. Launch Setup
2. Specify the Product Key and Home Directory
3. Select Database Option
4. Select Personal Edition (I am a student)
5. Click Install
The Installer starts and I see a progress bar on top. It goes till 36% quickly and when it reaches "Installing Pre-requisites" it just vanishes without any error message.
I changed the "symcjit.dll" to "symjcit.old" but to no avail. Anybody has a solution. Also is it possible to have oracle and sql server on the same machine.
I really appreciate it if someone can help

I have a similar problem. Someone please point out what is the specific solution ! Thanks in advance.

Problem for Oracle 8.1.6 installation on Turbo Linux 7.0 platform

I meet problem when installing Oracle 8.1.6 on Turbo Linux 7.0
system.
I successfully set environmental variables and accessed K.D.E
interface.
The installation blocked at 80% at “Database Creation Process”
window.
I have tried two times. Both blocked at 80% and could not
continue.
The error message is:
Warning: Cannot convert string “-*-Kochi Gothic-medium-r-normal-
--100-136-140----” to type FontStruct
Please help me.

Hi,
check out the management server service is started and also configure a Management server in the machine where you have installed the mangement service. and also you have to start some log service i think

Oracle JDBC driver problem for Oracle 8.1.6

i am a newbee to Java, i was trying JDBC programming thru Jbuilder 4.0. now the problem is whenever i am trying the DriverManager.getconnection(), I am getting an error "NO SUITABLE DRIVER". i have downloaded jodbc14.jar(oracle 9i JDBC driver) but so result. what can i do now? any other config issues or is it due to absence of a Oracle JDBC driver of Oracle 8.1.6.

i have set the classpath as mentioned. but no solution.
the error is like this::
java.lang.NoClassDefFoundError: java/sql/Savepoint
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:248)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:297)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:286)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:253)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
     at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
     at java.sql.DriverManager.getConnection(DriverManager.java:517)
     at java.sql.DriverManager.getConnection(DriverManager.java:177)
     at DbaseTest.DbaseForm.OpenConnection(DbaseForm.java:37)
     at DbaseTest.DbaseForm.jbInit(DbaseForm.java:73)
     at DbaseTest.DbaseForm.<init>(DbaseForm.java:26)
     at DbaseTest.Application1.<init>(Application1.java:11)
     at DbaseTest.Application1.main(Application1.java:40)
i have imported
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
import oracle.jdbc.*;
import java.lang.*;
the driver is registered by:
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());

ATTN: Urgent Update for Oracle US Payroll Customers

Dear Oracle US Payroll Customer:
We would like to make you aware of an issue impacting both 11i and R12
US Payroll customers who have applied End of Year 2007 Phase 2 (patch
6399900 - 11i or 6612902 - R12) or Year Begin 2008 (patch 6399200 - 11i
or 6660132 - R12). The following issue will impact any US Payroll
customer with employees in the state of Pennsylvania.
The Pennsylvania State Unemployment Insurance Employee tax rate change
from .09% to .06%, effective January 1st 2008, was not delivered as part
of the End of Year 2007 Phase 2 or Year Begin 2008 patches. This was
logged as bug 6709740 - INCORRECT PENNSYLVANIA EMPLOYEE SUI TAX FOR 2008
DEDUCTED AS .09% SHOULD BE .06%. Both the PA SUI Employee and Employer
rates need to be updated to reflect the new 2008 rates.
The following one off patches have been released and are now available
on Metalink.
11i - patch 6709740
R12 - patch 6716908
These patches update the following new 2008 SUI rates for the state of
Pennsylvania:
Employer SUI tax rate - 13.6866%
Employee SUI tax rate - .06%.
Please note that these rate changes will also be included in End of Year
2007 Phase 3 for both 11i and R12 customers. End of Year 2007 Phase 3
is scheduled to be released on January 15th (please note this date could
be subject to change).
Regards,
Oracle HCM Development

At OpenWorld, the developers said that XML Checkwriter and Deposit Advice would be available in version 12.6. I don't recall the expected date of release.

Creating Custom BI Reports from Oracle Agile PLM

Hi All,
Firstly apologies if this post is in the wrong forum, I struggling to find any real Oracle Agile Support.
I have been tasked with developing 3 custom BI reports for Oracle Agile. I have used BI Publisher in the past but only within Oracle E-Business Suite. From what I have seen so far Oracle Agile is a lot different.
What I need to understand is within Oracle Agile how do I create the XML Data file for the custom report, and then how do you then register the RTF template and run the report within Oracle Agile PLM.
Any help would be really appreciated.
Regards
Pete

Hi,
To develop custom report there are many way's. To discuss more Please send your contact details at [email protected]
Swayam Sevak.

Hardening Solaris for Oracle

Using Titan 4.0 as a hardening tool (part of the hardening process anyway). Question is not so much what to do but what not to do? Is anyone aware of possible issues using the Titan 4.0 hardening scripts (or any other known security measures) that might cause problems for Oracle?
TIA

god only knows

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

Urgent problem for Oracle Agile 9.2.2.4

Similar Messages

Maybe you are looking for