URGENT : Problem in Photo Dispay in ESS Who's Who
Hi,
We have a situation there that, the employee photo is not displayed for Who's Who Service. (ERP2005)
The problem is happening in QA System, but the same is coming in the Dev system.
From the PA30 we are able to display the photo.
Kindly throw some light
Best Regards
SERA
Hi Sera,
Compare the iview properties in both DEV and TST system.
Also, compare the config in R3 for both systems.
Sathya.
Similar Messages
-
Employee photo is not updated in ESS Who's who service
hi colleagues,
i am facing an error when i am trying to update the employee photos in the who's who service of ESS.
when new photos are added against an employee number via tcode OAAD in the ECC system, they are updated against the record and can be seen in tcode PA20. however, the new photos are not getting updated in the who's who screen. we have tried clearing the cache (figuring there might be a problem with the browser.... we are using IE 7.0) but were still unsuccessful.
any advice will be greatly appreciated.
thanx,
Amerhello deb,
already did.... not working there as well. except for the first time during logon, it does not ask for any user id or password while viewing the photo in the portal. the photo gets updated in PA20, PA30 but does not get refreshed in the portal. the portal shows the same old photo.
any comments or advice would be helpful.
thanx... -
How to Displaying Employee Photo in ESS Who's Who via Reverse Proxy?
Dear Gurus,
I have a bit of problem to displaying employee's photo in ESS Who's Who via Reverse Proxy.
In my landscape, end-users are only able to reach the Reverse Proxy server, not the actual SAP server itself.
In Who's Who, when displaying the employee's info, the URI for the photo is generated using the actual SAP server name.
Illustration:
- the URI we expect: https://portal.domain.com/sap/bc/contentserver?.....
- the URI we get: http://r3server.domain.com/sap/bc/contentserver?....
Does anyone know where/how I can set the URL (hostname and protocol part) to refer to my reverse proxy?
Or is it because SAP is using an absolute path rather than the relative one?
How do we go about it?
Thanks in advance.Dear Barinbhai,
How are you? We are fine at here!!!
Following URL generated thru Portal
System generated : http://p30app06.ril.com:8000/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
Photo opening directly on following URL:::
Desired URL : http://ess.ril.com/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
Pls sugget..
Hitesh Khatri
SAP -HR
RIL - Navi Mumbai.... -
ESS Who's Who How do I remove photo
Hi all,
How do I stop the photo box from appearing on the ESS Who's Who webdynpro iView?
RobHello Rob Adams,
I also faced same issue i solved with seetings in R3.
Note: we need not change any code in webdynpro.
Steps to perform in R3
Go to tcode SPRO in the backend and Personnel management-employee self services-service specific settings-address book-who's who-who's who:maintain settings-uncheck the photo check box
Please let me know your problem solved
Please rewards points if helpful
Thanksyou,
Regards
Vijai -
Employee photo is not displayed in ESS Who's who service
Hi colleagues,
Please help our colleague in this issue:
1) They have implemented correctly the procedure to display photos in PA20/PA30 and the current ITS based ESS who's who is displaying the photo.
2) They are trying to implement EP 7 with XSS BP 1.0 SP10 bold however in the Who's Who service the employee photo is not being displayed.
Best regardsHi,
Yo would have check the forum..
Display Photo in Employee Who is who search
Kind Regards
Hari Sankar M -
Employee Photo not displayed in ESS- Who's Who Services
Hi All..
My employee photo upload was successful in Quality System . I can also view the photo both in R/3 employee related facsmiles , header of PA20, PA30. and also the same photo's are displayed in ESS - Who's Who services.
steps I used-
OANR, OAC2, V_T585O, OAC3, OAC0 and for manual upload OAAD & OAOH.
For Mass Upload - program- OA_UPLOAD_AND_LINK
In production in the same way , all the photo's can be seen in the facsmiles but if I checked in Who's Who..Its coming like a outline with a red cross on top corner but without any photo.
Kindly give your valuable suggesions..
Thanks in advance...Hi Alok,
I am also facing the same issue in Prod Environment. If u r having the solution, please share with me.
I checked in NWA Trace is not registering.
currently i am facing issue with Employee Photo Under ESS--> Emp Search --> Change Own Data.
All my Employee Photos are uploaded in ECC, i am able to see from PA30 Header.
we are having same setup in QA- Environment , all the employee Photos we are able to see from Portal.
But in Production Environment, We are Having One Central Instance and Three application Instances and configured Load Balancing among Central Instance and Application Instances.
All the Servers Content Server in SICF t-Code is activated.
If i login into Prod Portal [either Centeal Instance or Application Instance] some time Employee Photo is Displaying Some time not,i.e No Photo at the top of corner X symbol. If i right click check on that URL, its poiting to the ECC server content server.
But If Not is Displaying --> Size is Showing Not Avaliable but Demension is Displaying.
But if Photo is Displaying ---> Both Size and Dimensions are Displaying Properly...
PHOTO URL Path When Photo is Displaying
http://xxx025.xxx.com:8011/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA926D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091012&secKey=MIH4BgkqhkiG9w0BBwKggeowgecCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxzCBxAIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDkwNjMxWjAjBgkqhkiG9w0BCQQxFgQUS%2BicVNGV7i6eSE8TXK5R3umNS%2FgwCQYHKoZIzjgEAwQvMC0CFQCPAZf3C48Lvl6i935mlsVqMw95owIUUJFedqFO2AoLGe6QCHHqBMSObIU%3D
Type : JPEG Image
Size : Not Avaliable
Dimension: 170*200 Pixels.
PHOTO URL Path When Photo is Not Displaying
http://yyy024.yyy.com:8010/sap/bc/contentserver/490?get&pVersion=0046&contRep=A2&docId=4CA927D07B816545E1000000AC16020B&accessMode=r&authId=CN%3DMRP&expiration=20101016091451&secKey=MIH3BgkqhkiG9w0BBwKggekwgeYCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBxjCBwwIBATAZMA4xDDAKBgNVBAMTA01SUAIHIBADFBNVRjAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTAxMDE1MDg1NzQ3WjAjBgkqhkiG9w0BCQQxFgQUAP9cyWhLiOtkp4vwo9KK%2FPQtxWgwCQYHKoZIzjgEAwQuMCwCFDs729ib7fVKbiGKz5CPPd1YHch3AhR7NVgtXJI7ej07GiKMpG06lZPWoQ%3D%3D
Type : JPEG Image
Size : 3527 Bytes
Dimension : 170*200 Pixels.
We are always opening the Portal with Fully Qualifies Domain Name (FQDN)
Please suggets the Solution, how to get rid of this Porduction Issue.
Thanks & Regards
Ganesh -
How to maintain Employee photo in ESS who's who without sap_all and sap_new
Hi ALL,
Displaying Employee photo in ESS Who's who. it is working but with SAP_ALL and SAP_NEW user profiles.
My requirment is without SAP_ALL and SAP_NEW user profiles. how it is working where can i maintain authorizations for this issue.
The parameter i used are as follows:
Business obj: PREL
Doc type: HRICOLFOTO
Personal num: 00000094
Infotype: 0002
Photo type: .JPG
please help me.
Regaards
Satya.Dear satya .
Please check the following
1. Trace with the t.code ST01 and check that object require.
2. The portal require the following obect:
S_SERVICE
S_RFC
P_PERNR
PLOG
P_ORGIN/ P_ORGINCON
P_HAP_DOC, if you work with Appraisal Document.
3. Check the table T77S0
P_PERNR, P_ORGIN, y P_ORGINGCON
4. Check that you have the roles need for ESS.
SAP_ESSUSER
SAP_ESSUSER_ERP05
SAP_EMPLOYEE_ERP05
SAP_EMPLOYEE_ERP_13
SAP_EMPLOYEE_ERP05_xx
SAP_EMPLOYEE_ERP_13_xx
5. Check the following notes:
SAP Note 857431 - ESS: Authorizations and roles for WD services in ERP 2005
SAP Note 844639 - MSS: Authorizations and roles for WD services in ERP 2005
SAP Note 1373177 - Back end authorization roles missing in EHP4
SAP Note 824757.
[ESS Quick Start|http://www.cogentibs.com/pdf/cogsap08/ESS.pdf]
Hope is help you.
Regards
consultor_ess_mss -
ESS Who's Who photo re-sizing?
Hello all -
we're implementing ESS using ECC6, EP7. The employee photos are appearing against the employee records in Who's Who, but the sizing and aspect of the standard (170x200) is not the same as the corporate standard (150x200), so the photos are distorted.
Does anyone have any experience with changing the sizing of the photo displayed in Who's Who?
thanks in advance,
SonyaHi Sonya
Is there any documentation which mentions that the standard size is 170*200?
I found a link on SAP Help when mentions that the size should be 130*100
http://help.sap.com/saphelp_nw70/helpdata/en/cf/95f6409daddb12e10000000a155106/frameset.htm
Please help sort this confusion out.
Thanks -
Hello,
Please, I need to know if we can modify the photo size at Who is who iView (ESS).
Thanks,
IsabelContent Administrator
> Content provided by SAP
> End User Content
> Iview
> Change Own Data
> Preview
> Edit Own Data and include a photo
Then click in the image, press Cntrl + Secondary mouse button:
Change the values of parameter Width and Height according to your needs.
Suggestions:
Width: 150px or Width: 170px
Height: 200px Height: 227px -
ESS / MSS Payslip & Who's Who Urgent
Hi Gurus,
Please clarify me that what will be minimum configuration required for the Payslip and Who's Who.
That is the very least configuration that will enable the service to work.
If possible please send me some docs to [email protected]
The system is ECC6
Thanks in advance
J.SeraHi,
Here is the document which will help you with the ESS configuration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
After configuring, map the EP user to an employee at the backend thru infotype 0105.This is enough for who's who to work.
Regards,
Sharadha -
ESS / MSS -- Error in Portal while Accessing Who's Who (Urgent)
Hi Gurus,
I get the following error while accessing who's who, please clarify
Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication failed
some where inside the error log it gives that
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.whoiswho/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.whoiswhoapplication)
Is this becasue of the unavailability of change authorization?
We have'nt actually started the config.
SeraHi,
This is because you have to give end user permissions for the portal user ot access the objects.This is an issue with permission.
refer the note 939412 for solution.
Regards,
Sharadha -
Problem displaying photo in who's who
Hi Experts,
I have done all the necessary changes at the backend level ie setting the path and object for HRCOLFOTO.....
Also if i right click on blank photo in portal and check the url, its shows the correct path and version but still unable to fetch the photo... I have maintained the photo through tcode opoh and very well able to get the same in pa30 but when i login to portal and try to see the photo for the same employee in who's who appliation , i am unable to see that...
Please help on this .....
Regards:
Sid..please can you check this
Content Administrator
> Content provided by SAP
> End User Content
> Iview
> Change Own Data
> Preview
> Edit Own Data and include a photo
Http access should be enabled for the content server and check entries in SDOKPROF table -
Problems downloading Photos from 8900 smartphone
Hi
Im having problems downloading photos stored on an SD card from my BB to PC.
Ive looked at the other posts and turned on mass storage accordingly.
When I connect my BB to the PC using the USB link, the BB informs me the mass storage mode is being activated and requests a password, which I enter.
However, the BB does not appear in the Devices list in the My Computer screen on the PC.
Does anyone have ideas as to the problem??
I have lots of photos on there, so want to avoid sending dozens of mails to get the photos off the BB.
Thank youHi stuart_fraser,
Have you checked the Windows Device Manager to see if the BlackBerry and/or Mass storage device shows up? Also, the BlackBerry may show up in "My Computer" as a removable storage device.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Urgent problems with image viewing on my 20 inch Cinema display???
I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.
-
Hello experts:
Thank you in advance for all your replies.
there is a function--- ENQUEUE_EFPAYR failed with exception 8, who know the possible reason, how a function raise an exception, how to locate where it is , search by raise ? please
help me with that urgent problem .
couldn't thank you more.
Best regards.Hi,
The ecxeption no 8 corresponds to the 8th exception that is listed in the exception tab of the FM when you open the FM in SE37.
Exceptions are raised inside the FM . The syntax is 'RAISE <EXCP> .' where <EXCP> is the name of exception.
For the enque FMs if you search for term 'raise' in the code you may not find the place where it is raised, as this FM calls some forms within it that are not part of the function groups so cannot be searched directly. You can debug it with breakpoint at statement 'RAISE' to locate it.
Maybe you are looking for
-
Sidebar devices not the same in 'save as' dialog as finder windows.
When I go to finder prefs (command ,) I can change what shows up on the desktop and what appears on the 'sidebar' ... That works fine ... However when I go to save as in many programs the "computer" still appears in the sidebar even when it is turned
-
I just installed iCloud for Windows on my Windows 7 PC, running Outlook 2007 and IE9. I have been dealing with an annoying issue for years with my iOS 6 devices, where I enter a reminder (which is sync'd to my MS Exchange server), and the reminder d
-
Hi Folks I have designed a dashboard page as shows below. However, my manager wants to give 'Budget' as column heading from 'Original Budget' to 'Variance %'. Previously I used static text to make differentiation but it is very hard to group from cli
-
Could we restrict ability to approve hours in CATS_APPR_LITE and CAT7?
Hello everybody, we're looking for the way to restrict ability of users, that access to CATS_APPR_LITE transaction, to approve hours only entered by specific CID(s). Is there a specific authorization object that drive the ability to approve hours? an
-
Reference document of migo transaction
hi, can anybody tell me how i have to assign reference doument in migo transation? like we gr against po with mvt. type 101. now i have made another mvt type 901 by copying101. my question is how it is decided which mov. type will activate when? rega