Urgent: problem running reports in Oracle 10g application server
Hi all,
our problem is that we deployed a jsp report as Ear file in Oracle 10g application server in infrastructure node.deployment says successfull.when we try to run that report it says 401 unauthorised.while sending request we are passing the database username,password &sid is this correct or any configuration setting to be done to make it run.
one morething normal jsp works fine.when we run reports jsp it gives the above mentioned 401 error.
hello,
when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
thanks,
ph.
Similar Messages
-
Classpath problem during deployment in oracle 10g application server
java.lang.NoClassDefFoundError: oracle/toplink/sessions/UnitOfWork
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.loadServlet(HttpApplication.java:2028)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.findServlet(HttpApplication.java:4523)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2561)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:640)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
required urgent help.hello,
when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
thanks,
ph. -
How to run servlets in Oracle 10g Application server
I have tried running the simple servlet given in this URL
oracle.com/technology/sample_code/tech/java/servlets/samples/hellouser.
The following error comes when i try to access it
"Invalid protocol verification, illegal ORMI request or request performed with an incompatible version of this protocol"
I have used simple deploying method and followed alll the steps givenThe following error comes when i try to access it
"Invalid protocol verification, illegal ORMI request or request performed with an
incompatible version of this protocol"You are using the rmi port of oc4j in your URL. Instead, your should use the http port. Yes, of course, the http port.
The initial ports are defined at ORACLE_HOME/install/portlist.ini ... if you reconfigure (say, by changing the ORACLE_HOME/Apache/Apache/conf/*.conf or the ORACLE_HOME/Apache/conf/* files), the portlist.ini will not be updated. Well, you can always use "opmnctl status -l" to find the http port. -
Setting of ICONS in Oracle 10G Application Server
Hi...
I'm facing a problem of Icons which are not displayed at run time.
I'm using Oracle 10G Application Server.
plz tell what setting should i do.
its urgent.
Thanks & Regards
Sanjeev Kumar1 did u put the icon file in the forms folder in IAS?
2 Are you able to access the icon if u directly enter the icon value ?
http://www.Alexyscorp.com/myicon.gif
if its not port 80 enter the port
3 In the httpd.conf file whats the root directory ? Try putting the icon there
Best Regards
Rajesh Alex
Message was edited by: Rajesh Alex
Alex(AlexysCorp) -
Oracle 10g Application Server Stand By Creation
Hi all ,
I am newbe for oracle 10g application server . I need to know that how to create stand by applicattion server and how to make the report server name same as production server so that in case of emergency i can quickly shift on stand by.What we did was build the second server and powered it down. If our main data server loses power we start it up. The two servers are never up at the same time.
To change the report name :
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@tasias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_old with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_old.conf /u01/app/oracle/product/midtier/reports/conf/rep_new.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_new (change rep_new to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from "rep_old" to "rep_new" (change rep_new to new report server name)
For 11 use this note :
How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]
Best Regards
mseberg -
Oracle 10G Application Server : Getting Servlet error
Hi,
When I am trying to execute the JSP after deploying the same as war file in Oracle 10G Application server, I am getting the following exception.
I am not sure why this sample jsp is not compiling and giving this classnot found exception.
Exception is:
SampleJSP: Servlet error
javax.servlet.ServletException: java.lang.ClassNotFoundException: Sample_Hello
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:323)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
This is working fine with Tomcat server when I tried to test from my Netbeans IDE.
thanksHi
I could figure out the problem. For Oracle AS, we need to include the folloiwng in web.xml file. Now every thing is working fine for me.
<servlet>
<servlet-name>jsp</servlet-name>
<servlet-class>oracle.jsp.runtimev2.JspServlet</servlet-class>
<init-param>
<param-name>check_page_scope</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
Thanks -
Deployment of class file in oracle 10g Application Server
Hi,
I have a class file
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloWorld extends HttpServlet {
public void doGet(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException {
res.setContentType ("text/html");
PrintWriter out = res.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
out.println("<BODY>");
out.println("<BIG>Hello World</BIG>");
out.println("</BODY></HTML>");
now I like to deploy(in oracle 10g Application Server) and run this file.
please help me.Hi
You have to deploy Servlet as a WAR File. I hope you already have web.xml file which u can get automatically in eclsipse during creation of servelet. I am not sure what ide u r using here. If u have created servlet in eclipse then I would suggest create a project dynamic webproject if u have not where IDE create all required files autmatiicaly and even you can deploy application from there itself.
If you wanted to deploy manually then follow below steps (if u have war file)
I am assuming you already created a Weblogic Domain and have admin username/password. Start your domain. Login into weblogic console like http://host:port/console and use admin username/password. Then from Deployments section, deploy the above WAR file. In Weblogic you can deploy JAR (EJBs, java files), WAR (web jsp, html, webservices, servlets) or EAR (JAR + WAR). In your case its just a WAR file.
Thanks
Sujit Singh -
Dear All,
i have installed oracle 10g application server 10.1.2.0.2 with infrastructure and forms & report.
now i downloaded the patch 10.1.2.3 to apply on it.
I have two homes in my application 10g server (infra and forms&report).
should first i apply apply patch on infrastructure and than on forms & report home.
am i correct.? can you please give me procedure how to apply the patch on 10g application server 10.1.2.0.2.
Thanks & regards,
Sher khanHi,
can you please correct me in sequence..
1) install oracle 10g application server including
i) infrastructure
2) install forms and report.
3) apply patch 10.1.2.3 on application server
3.1) apply patch on forms and report
3.2) than apply patch on infrastructure..
is it correct sequence thanks,
Thanks & regards,
Sher khan -
Is it possible to upgrade only apache in oracle 10g application server.
Hi All,
I have to upgrade only apache in oracle 10g application server with out upgrading oracle 10g as.
Is it possibel to upgrade only apache version in oracle 10g application server. if yes.could you suggest the steps that i need to follow.
This is very urgent.
Thanks in advance.
Regards,
SathyaIf your trying to upgrade just apache in that oracle home, then no. If your trying to upgrade to a real apache version, from apache.org, mod_oc4j won't work. You need to use Oracle's version of Apache or HTTP Server.
Is there a reason you only want to upgrade Apache and not the whole oracle home?
There are ways to do it, but it wouldn't be supported by Oracle and I wouldn't recommend that either.
Edited by: user11993398 on Apr 13, 2011 3:04 PM -
Oracle 10g Database Server or Oracle 10g Application Server
Greetings and Salutations!
I need to install APEX 3.01 for development purposes and I'm wondering if I need to do an Oracle 10g Database Server installation, an Oracle 10g Application Server installation, and then the APEX 3.01 installation, or is there another way such as an Oracle 10g Application Server installation and then the APEX 3.01 installation.
I'm confused and I need advice.
Thanks,
CharlesApex software runs inside the database using the database's PL/SQL engine.
Apex software is accessed via HTTP requests that may be sent to an HTTP server as included on the database 'companion CD' or in the Application Server.
Apex installation is described in the APEX install manual at http://www.oracle.com/technology/products/database/application_express/index.html -
Oracle 10g application server installation and configuration
Dear All,
i am going to install oracle 10g application server including forms & report services.
what is the latest version for oracle 10g application server so that i download and install the correct one.
please put URL to download the software .
Thanks & regards,
Sher khanhi,
for forms and reports purpose you can download standalone oracle forms and reports (version 10.1.2.0.2) component.
If you want to upgrade it you can upgrade it to 10.1.2.3.0.
find url for the same :
http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
i'll recommend you to use oracle fusion middleware 11g forms, reports,portal and discoverer component.
regards,
Ajinkya -
Installation of Oracle 10g Application Server in custom port or 1522
I want to install Oracle 10g Application Server in Port 1522 or some other port as in port 1521 Oracle 10g database server is already installed.
But every time I try to install Oracle 10g Application Server it give the warning about 1521 port and then start installing on same 1521 port automatically.
What should I do if I want to install in some other port ?
Please help
ThanxAs a method, to install an OAS on a custom port,
1) make a file called staticports.ini and define your components/ports there.
2) on the Specify Port Configuration Options screen, select Manual and specify this file.
Follow this link for details for 10g.
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#CHDJACIG
However, there are ways to use the same port for OAS and DB depending upon the version of your listener. Check the version of your DB Listener, and if it is 10.1.0.2 or higher then you are just good to go with automatic port assignments.
AMN -
Deploying Oracle Retail Applications in Oracle 10g Application Server
Hi All..
Can anyone help me to know:
How to Deploy Oracle Retail Applications(like RMS,ReIM,RIB) in Oracle 10g Application Server.
Regards.Hi Ahmed,
It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
Best regards,
Erik -
Auditing in oracle 10g database and oracle 10g application server
Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg -
Anybody installed Oracle 10g application server on windows 2008 (64 bit) se
Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
which version of OAS we should use?l. we are using dell server .
regds
santosh
Edited by: user5429538 on Feb 24, 2010 2:59 AMHi Santosh,
Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
Please refer below links for download and to check certification:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
Hope helps
Regards,
X A H E E R
Maybe you are looking for
-
ICal won't sync from Mac to iPhone
iCal wont sync from Mac to iPhone
-
TS3999 Outlook and Icloud calendars : how to set up?
After a prompt from my PC I just installed the Icloud syn on my PC and allowed it to sync my Outlook calendar and contacts. Instead of duplicating them as I thought they all have been sucked into Icloud. Totally unacceptable!! Outlook is my work tool
-
Now I know why people hate Fios Cust Service
My family and I rushed home from our weekend to come home and watch the Wrestling PPV. I tried to order it via remote control and it says I'm not authorized to purchase. So I call the support line 50 minutes of holding, I try doing on-line chat. Tha
-
I've created a Database schema that will allow the admin to easily update thier form. To do this I am using the data from the DB to dynamically create the form. For example, if the admin wants to add a new input to the form, they can do that by givin
-
I recently updated my Lumia to 8.1 ..but....
In settings the extra+info is still showing black ... I updated my phone through preview of developer and i am very worried....Doesn't i got all the features plz tell me.... Solved! Go to Solution.