URGENT Problem with my Zen Mic

Okay so I tried updating the firmware to 2.0, no problem. I did that at my sister's house and when I tried to plug in my Zen into my computer to upload songs again, Windows didn't recognize it. So I repeatedly installed/uninstalled the drivers (downloading the driver and using the cd-rom) but it still wouldn't recognize my Zen. So I put it in rescue mode to reload the firmware and now whenever I turn it on, it says firmware problem. Sorry if this has already been answered by I searched through the forums and didn't find anything. So how do I get out of rescue mode and then make my computer recognize my Zen?
I apolgize in advanced if this question has already been answered but I really did try using search and I couldn't find anything regarding my situation.
Thanks a lot guys!

Did you read this...
Filename: ZenMicroMTP_PCFW_LB_2_0_05.exe
IMPORTANT: This is a beta version of this update. Before you decide whether to install beta firmware, it is important to understand that a beta release does not have the stability of released Creative firmware. Beta releases are meant for testing and validation, so you may encounter problems with a beta release that could possibly result in loss or corruption of data, necessitate a reformat of the device, or, in extremely rare cases, may render the device inoperable.
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing PlaysForSure on your player, use Windows Media Player 0 to restore audio and/or data files to your player.
That's why I'm not upgrading it!

Similar Messages

Problems with my Zen V P

Hi there, I was wondering if anyone could help me sort out a problem with the Zen V Plus that I bought a couple of months ago. Today the battery ran out so I plugged it into my laptop and left it to charge. After?a few hours I checked how it was going, and it was nearly full, so I decided to leave it for a bit longer so it could top?up completely. However, when I came to stop the charging, I discovered that the device no longer responds to any button that I press. Also, it isn't detected by my computer when its plugged in. I have charged it'sbefore with no problems.
Please help!!!Message Edited by VeganGirl on 09-5-20070:47 AM

http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=92346#M92346
hi guys,
i have a solution
firstly connect your pleyer to pc
then press the reset button and hold it
while holding the reset button turn it on by using the power swich [Image]
then your player will turn on

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

Problems with new Zen firmware. Device keeps hang

Hi,
I currently am facing some problems with my zen. I have used the zen for 2 mths without problems. When I recently updated the firmware, my zen keeps hanging and it turns on with dim lighting. It is unable to turn on or off and i need to do a reset in order for it to work. Can someone help? My battery keeps draining out while I sleep.

Hi,I have upgraded? my firmware again and the problem seems to have stopped. However, there is a problem with viewing xvid files now. I have compress the files to 320x240 and copied them into the player and it was playing fine. After I upgraded the firmware, I get an error that the format is not supported??

Problems with Creative Zen V plus software

*Problems with Creative Zen V plus software Dear friends,
I'm trying to install the software included with creative Zen V Plus but it is not possible - it stops at 63%
I get this following error:
"CTIntrfu.dll can not be installed"
"DoInstall fails to launch E:\PDE\CTXInst\Setup.inx"
I'm using "Windows XP 2002 home edition - serivce pack 2"
I'll appreciate any help.
At the moment my PC doen't recognize the Zen V
Sorry for my english... It's not my language.

Hey Guys,Here is a link to instructions on how How to obtain and to install USB 2.0 drivers in Windows XP Service Pack . http://support.microsoft.com/default...;EN-US;Q329632?Win2000 and later have the capability to support USB 2.0, but USB 2.0 was released after XP was release, so there weren't any drivers installed before Windows XP service pack 2. Make sure you've installed all your windows updates including service pack 2. You can check if you have SP2 by right-clicking on my computer and choosing "properties", it will say on the general tab. Also the way to tell if you have USB 2.0 drivers installed is to right-click on my choose "Manage", then choose "device manager" look down to "uni'versal serial Bus controllers" and click on the + . This will expand the USB devices. Look for the word "enchanced" (USB enhanced host controller). If you see it, then you have USB 2.0 support. If not, use the link above and get the drivers. Hope this helps!?JT

VERY BIG PROBLEMS WITH MY ZEN MICRO AND MEDIASOURCE! PLEASE PLEASE PLEASE HELP ME! PLEASE RESPOND

Ok so a while back I had to give up my computer because it wasn't working.
I thought that with my new computer I'd be able to transfer all of my music from my zen micro onto my new computer.
Now my new computer is set up and I have installed creative mediasource and everything. I started to transfer my music from my zen onto my computer. My first 2 songs transfered successfully onto my computer. On the third song, I get this message:
"Unable to read file, file may be in use, missing, or corrupted."
I thought that maybe it was just that one song so I shrugged it off. But then it says the same thing for every single other song that i have! Only my first 2 songs out of my entire music library on my zen will transfer!!!
Please i really need your help!!!
And say that there is no hope in getting the rest of my songs to transfer and i have to download 094 songs from limewire? I'll surely be arrested for downloading that much! What should i do if i must download all of them?
And one more problem with my zen: Some of my Jump Little Children songs are doing something weird. The song will be fine and then a clip from another song will play during it! And then press next and it just keeps playing all of my Jump songs in order even though my player is on shuffle and they do the same thing with the clip from another song interupting it. Whats going on?
Most importantly though, i really need the questions answered about transfering from my zen to my computer because i'll be getting a new player soon. But this is my entire music library at stake!! PLEASE RESPOND!!!

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

Problems with my Zen Touch

Tracks seem to be jumping a bit so i did a reset and clean up, however after it started rebuilding library, a firmware problem is popping up and i've have no clue how to solve it. Resetting it just brings me right back and I can't get it to the menu for reboot/ format. Please help !

I'm having the same problem with my Zen Touch. When I press Play/Pause, it will sometimes work correctly, other times it acts as if I had pressed Previous. When it does this, it sometimes jumps to the start of the current track, sometimes to a different track. This is the most common problem, but I have also had it act as if I had hit Random. I have tried loading the latest firmware, but this had no effect on the problem. Thanks.

Probleme mit dem Zen Toch 40gb/ Problems with the Zen Touch 40gb!!:( Out of Gara

Hallo ich br?uchte dringend Hilfe. Ich kriege den Creative Zen 40gb nicht mehr zum laufen Da er nur ab und zu angeht Das ?rgerliche daran ist das ich im Ausland war und das Teil nur 4 mal benutzt habe Leider geht er nur ab und zu an und wenn er mal an war, ist er dauernd abgest?rzt Da ich so lange weg war, ist mir jetzt auch noch die Garantie abgelaufen ( Jahr 3 Monate). Im Media Markt bekomme ich leider keine Unterst?tzung nichteinmal ein Versuch das Ger?t auf Kulanz reparieren zu lassen
Leider ist mir das ein wenig zuviel Geld f?r 3 mal musikh?ren. Vielleicht kann mir hier einer Helfen!!!!!!!
I have big Problems with my Zen Touch 40gb May be one of the members here can help me!!because my local dealer isnt able to do this Because the player is older than one year ( y and 3 months) I think that the garanty is normaly to short for this player. In germany you can read a lot about the problems of the Zen. Can it be that the Software doesnt work 00 % I was the last year in Poland so i had the zen 3 times in use The player freeze everytime and the biggest problem now, i cant switch the player on to make an update or something !!! please help.
Greetings

sry about ur problem. I had/have some of ur problems with my zen micro 5g. have u tried 2 reset it into recovery mode and do a cleanup? it won't mess up any of ur songs or anything like that.

Problem with my zen vision:m 30

hello, i have a problem with my zen. I've reload my zen all the night (with a special chager), i can't turn it on, when i connect it to my pc, there is a light blue, but my pc dont detect it, there is a "!" yellow in the periph settings... I have recovery 2 times, after that it work some minutes, but i cant put music or photos in my zen, the software and my pc dont detect it, i have xp pro sp2, windows media player . I cant recovery the zen with the special tools because it isnt detect by my pc... Thanks for ur help
sorry for my bad english

The first step is to do a cleanup >reboot on the player if that don't work? then while connected uninstall thru Device Manager,reboot computer then plugin to have Windows find & reinstall the player, if that? doesn't work then format,cleanup>reboot player to see if that solves the problem. loosing files is a last resort . Whatever you do DO NOT choose RELOAD FIRMWARE as you don't have recognition from the computer & can not reload it. RELOAD firmware ERASES the firmware making the player useless until it can be reloaded. Link for resue/recovery access on player? http://forums.creative.com/creativel...ap&thread.id=3

A few Problems with my Zen Mi

Hi I have had my player for just over year now and a few problems have just come up. First off the power switch is getting harder and harder to use. I am having to push the power button pretty hard now and have to hold it for a little while. Also when connect my player into the computer and go into the creative mediasouce player and click to access my zen micro it says its not connected.
Can anyone help me with these problems.
Its a 5gb zen micro version .02.05 if that means anything

Regarding your connection problems, are you using WMP? It is known to cause connection problems with the Zens.
Have you tried reinstalling the Creative Software?
Have you tried the connection with another PC IF available?
And regarding the power button, I'm guess that it is due to aging? I still have my Zen Micro (even though I use my ZVM) and I do have to hold the power button a little bit longer than before (3-5 seconds more) for it to turn on. Same happens when I use the lock mode (I just tried it)
and it's kinda rough for it to push instantly (effortless but still feels a little rough).
Good luck with your connection, let us know if it worked!

PROBLEMS with the zen sto

so the first problem with my zen stone i found was that no matter how much music i had on it, it would only play certain songs. for example, if i have 200 songs on it, it only plays abou 30 of them over and over....i tried using the online manual but that was NO HELP, it makes no sense when it tries to describe how to organize music/folders.
now i have another problem...my stone WONT PLAY MUSIC. i open the folder and click and drag files from itunes(like i did before) into the folder, and it loads them. as soon as i disconnect my player and hold down the play button to play, it blinks 3 times and nothing happens, and everytime i hit play after that it does the same thing..
please helP!

I use Widows XP Professional SP3 and Windows XP Professional x64 SP2 with medially .
I can't see why this matters because the problems are located at the player itself, I've got no
problems with moving files to the player or any problems with connecting the player with the computer,
I'm experiencing a lot of freezups of the firmware of the player, harddisk keeps running, it does that
till the battery is low or till I push reset, sometimes this doesn't help at all, the operating system at
the harddri've gets somehow damaged by the instability of the filesystem, reflashing the firmware helps
the. Problems appear to be a software problem with the firmware, the player went away for repairs once,
with this problem, they have checked the harddisk, harddisk was fine but the os crapped up it's self
somehow, know this because I asked them to tell me every thing what was wrong and how they solved this,
asked them also how I could fix the player myself? if it was no hardware problem.
They told me to reflash the firmware and format the dri've from the service mode out.

Problem with Creative Zen Touch DAP-HD0014

Hey,
I have the Creative Zen Touch DAP HD004 as listed in the subject. Version .0.03
In the "Information" part of the player, it lists it as having GB of music available, but in the menu only the 59 default classical music songs appear. (These are not knowingly mine!)
I was wondering whether there was any way to turn the player into Hard Dri've mode to retrieve these songs, or to use some sort of program to view them and put them back onto the player? Everytime I use My Computer to browse the MP3 Player, all that appears are the same 59 songs.
I hope this information can help someone to solve my problem!!

Re: Problem with Creative Zen Touch DAP-HD004
SmallBlue wrote:
Unfortunately not since the Zen has broken whilst I am travelling. Is the Nomad Explorer possible to download as Freeware? If so I will give that a shot. Thanks for the reply.
EDIT: I downloaded a trial version of "Notmad Explorer" and I can now see 2590 Data Files. Once I download a full version, is it simple to just conver Data Files into Audio Files?
Thanks so much for even getting me to this stage! I've spent weeks downloading all sorts.
Message Edited by SmallBlue on 2-29-2008 03:26 PM
Nomad Explorer find it here last app on the page? http://support.creative.com/download...le=033&nPage=2? What format are the files in now(wm,mp3,aac)

Having big problems with Creative Zen Micro Photo!! I need much urgent help!

Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

There's video problems with my Zen Vision:M already (M video cable related) Please help

Some background...
System:Windows XP with Service Pack 2.
Player: Brand new Creative Zen Vision: M with no firmware updates.
My Zen Vision:M has a problem (besides the scratch and fingerprint attracting top surface): It won't play videos on a TV screen when the M Video Cable (also from Creative) is linked to it anymore. It's only been a few hours...
I had the cable already, and got the player today. I let the player charge to /4th of a battery while I was setting up all the software. I ran the software programs just to take a peek, only changing the name of my player (to my name). I used Winamp 5.3 to put a music track on the player to test it. After that, I hooked it up to the VCR in my room through the white and yellow A/V plugs in front. It worked just fine. It to the tv a little large, but I was okay with it.
Later on today, the new AC charger I ordered came in the mail (Player came through UPS, charger through USPS). I looked at my old charger (Creative Zen Touch) and realized it would work with the plug-in part of the sync unit at the bottom. I tested it for a minute and it did. I still took it out and tried the new one. This is where, I think, something happened. I had to press the sides to get the thing in, and it was hard to come out. Everything still fit just right, and nothing seemed to be wrong. I used my old charger as I added more of my music library. Now it was on to videos. I had to convert the first two test vids (they were .wmv), but they played on my player fine. I put a bigger .wmv file onto the player to see if it had to convert it, and it did. It still played on the player. When I go to hook it to the TV with the A/V cord again, there was nothing but a black screen with the occasional diagonal scan line. The sound is still there.
Besides quirks with the navigational system, the player is still great for music and video. Still, I needed no video capability, and one of the things that made the ZVM a buy for me was watching my vids on the big screen. I'd return this for a second try, but I want to know if this is a recurring issue with you guys and if there's something I can do to fix it before a return. Did I mess with a setting? Should I get new firmware? Did I do wrong using my old charger? If any of you have an answer, or need more info on my situation, please let me know.
And BTW, does anyone know of some better software for organizing files on the ZVM? I used Winamp for my Zen Touch and the music on my ZVM, but videos are another ballpark. I can't transfer a video from one folder to another folder (assuming both folders are on the ZVM). Not to mention the music I transferred using Winamp isn't even showing up in Windows Media Player. I think I need a different program altogether.

I have got a new Creative Zen Vision W and getting the same problem....when i attach to the tv then i am able to hear the audio content and the video does not show.Are we missing something ? or is it a problem with the player. Also the software provided with the Zen converts small .vob files to .wmv when ever the size is large it gives an error 'conversion?unsucessful'.Any body facing similar problems please help.

*URGENT* Problem with my Zen Mic

Similar Messages

Maybe you are looking for

URGENT Problem with my Zen Mic