Urgent Problems about connect two devices

I have had a itouch and I connected it to the itunes. But now when I first connected my iphone with the itunes. My iphone was synchronized and changed as my itouch. I lost connacts, photos, messages and so on. So how can I get back my information? Thank you

The options were transfer the backup for your iPod Touch to your iPhone or set up the iPhone as a new iPhone. You don't loose any iPod Touch information regardless.
Had you chosen not transfer the backup for your iPod Touch to your iPhone, none of the data on your iPhone would have been touched.
The data that was on your iPhone which was replaced when you chose to transfer the backup for your iPod to your iPhone is lost and cannot be recovered.

Similar Messages

Bluetooth - Connecting two devices at the same time on a Run (Bluetooth Mot headset

I would like to connect two Bluetooth devised at the same time on my runs. (Bluetooth Motorola headset (S10-HD) and Polars heart monitor (H7) at the same time) is that possible?

fitnessdr wrote:
Thank you for the information. So if I were to return the new bluetooth keyboard, should I purchase the "Palm 3169WWZ Wireless Keyboard", or is there another model I should be looking for? (From what I can tell, I believe this one will use IR.)
THANKS!
Correct, that's the one I use.
Be sure to download the newest driver (1.13) for the keyboard from the Palm Support pages for the keyboard:
http://kb.palm.com/wps/portal/kb/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_...
Do not install the driver that comes with the device on the disk - 1.13 is designed for the TX and fixes a bug that existed in the original driver.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Urgent problem in connecting servlet and oracle

Hi
I have problem in connecting servlet with oracle.Kindly let me know what all the classes i should include in classpath to get connected.Where will i find the oracle driver.Kindly help me to do this.
With regrds
Vaiju

http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/toc.htm
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
http://www.oracle.com/technology/sample_code/tech/java/codesnippet/jdbc/index.html

Problems to connect two external firewire hardrives at the same time

I try to have both external connected at the same time one via Firewire 800 and the other via Firewire 400 and it doesn't work. My solution is to change to Usb 2.0 one of them. Maybe I have a problem with my Firewire? How can I check if the ports are working properly?
Thank you in advance for any help!
The two external hardrive: one Lacie 1TB Big Disk Triple Interface and a Lacie d2 Extreme Triple Interface.
iMac 24" 2,33Ghz Intel Core 2 Duo Mac OS X (10.4.8) 2Gb RAM, 500 Gb Hardisk, Nvidia Gforce 7600 GT
iMac 24" 2,33Ghz Intel Core 2 Duo 2Gb RAM, 500 Gb Hardisk, Nvidia Gforce 7600 GT
iMac 24" 2,33Ghz Intel Core 2 Duo 2Gb RAM, 500 Gb Hardisk, Nvidia Gforce 7600 GT
iMac 24" 2,33Ghz Intel Core 2 Duo 2Gb RAM, 500 Gb Hardisk, Nvidia Gforce 7600 GT

I'm having a similar problem. New iMac 24" with one FW 400 and one FW 800. I have a Seagate in an external case connected to the FW 400 and I got a new LaCie D2 triple interface and am trying to connect via the FW 800. Both drives have their own power supplies. When I connect the LaCie to the 800 port, it mounts and works fine. But as soon as I connect the Seagate to the 400 port, the LaCie icon disappears and I get a message about improper removal of a device. So, both drives work fine when connected one at a time, but don't play nicely together. I will appreciate any suggestions.
iMac Mac OS X (10.3.7)

What is the problem about connection itunes store?

My product :ipod touch 4G. Impossible Connect to me Itunes Store!! I´ve the new version 10.5.1 and my pc is Windows 7 32 bits??? what happen??...
PC is working slowly!!. It´s same issues version 10.5 . I Hope that someone help me about this problem.

Hi Meedi,
If you are having language issues with a film purchased from iTunes, you may find the following article helpful:
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Regards,
- Brenden

Question about connecting two monitors to Mid 2010 MBP

I have a Mid 2010 MacBook Pro (running OS X, 10.6.8), and I want to connect it to two ASUS monitors (VS228H-P) that have HDMI, DVI, and VGA interfaces.
1) Is this possible?
2) What parts will I need to make the connection?
3) Will I be able to close the lid without the MBP going to sleep?
4) Any recommendations for an external mouse and clickety-clack keyboard? (My preference is for wireless, but I'm open to wired, too).
If there are other recommendations for configuration (I'd like to spend less than $150/monitor. They won't be used for gaming, but for working from home and watching various media...)
THANKS!!!

Hi kishap8,
Have you made changes in the display settings to make the PC use both monitors? It doesn't extend the screen on it's own.
Here is an HP Support document on how to change display settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03366869&cc=us&dlc=en&lc=en&product=5309983
And here are a couple videos (for Windows 7 that is very similar to Win 8) on how to work with multiple monitors:
https://www.youtube.com/watch?v=Nj0RT8yVlUA
https://www.youtube.com/watch?v=WDQCXOSJGM0
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Urgent: Problems with connecting to a database

I have problems with getting a connection to both Oracle and Access.
For Access I added the .jar files in my classpath.
For Oracle I don't know which files I should add to the classpath.
Here's the code:
To connect with Access:
public class AccessDatabase extends JFrame {
     private Connection conn;
     private Statement stmt;
     public AccessDatabase() throws SQLException,IOException{
     DriverManager.registerDriver(new easysoft.sql.jobDriver());
     System.out.println("Connecting...");
conn= DriverManager.getConnection ("jdbc:odbc:easysoft:db1");
     System.out.println("Connected");
          stmt=conn.createStatement();
     ResultSet r=stmt.executeQuery("select name,adress from Tabel1");
     while(r.next()){
          String a=r.getString("name");
          String b=r.getString("adress");
          System.out.println(a+""+b);
and for Oracle:
public class AccessDatabase extends JFrame {
private Connection conn;
private Statement stmt;
public AccessDatabase() throws SQLException,IOException{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
System.out.println("Connecting...");
conn= DriverManager.getConnection ("jdbc:odbc:easysoft:db1");
System.out.println("Connected");
stmt=conn.createStatement();
ResultSet r=stmt.executeQuery("select name,adress from Tabel1");
while(r.next()){
          String a=r.getString("name");
          String b=r.getString("adress");
          System.out.println(a+""+b);
     }}}

For getting connection from oracle you need to do 2 things.
1-- As said earlier put classes12.zip in classpath
2. For getting connection use as below ---
instead of --conn= DriverManager.getConnection ("jdbc:odbc:easysoft:db1");
Use thin driver ---
conn = DriverManager.getConnection (jdbc:oracle:thin:@servername:portno , UserName,Password);
replace servername UserName,Password in code you will get the connection.
Thanks
Rakesh

Bluetooth problem - Cannot Connect to Device that is not copyright protected SCMS-T Method

I have a Qosmio X875-5280 which has a bluetooth adapter. I also have a bluetooth device which is an adapter for a Bose Sounddock such that the device allows the Sounddock to receive the bluetooth audio stream from the laptop -- at least that is how it worked until recently. Diagnostics show that both the bluetooth adapter and the bluetooth device are working. When trying to connect to the device, I now get "connection failed" message or the message "You cannot connect to a device that is not copyright protected by SCMS-T method." It seems the Toshiba bluetooth stack is responsible for this, however, I fail to see why a device which is acting like headphones fails to connect now. I have Windows 7 64 installed. I have uninstalled all of the bluetooth drivers and re-installed them several times. Attached is a pdf file which shows all messages and settings relevant to the issue.
Attachments:
bluetooth messages.pdf ‏158 KB

See the solution I proposed some time ago here.
-Jerry

Problem with connecting two computers with windows7 to the internet at the same time with wrt110

Me and my friend have both installed windows7 on our computers.
If one of us connects to the internet via wireless router WRT110 it goes without any problems.
But if we both try to connect to the internet at the same time, it doesnt want to connect.
Can anyone help?
Solved!
Go to Solution.

You can try upgrading/reflashing the router's firmware....Download the firmware from www.linksys.com/downloads and save it on the desktop....Login into the Linksys GUI and click on Administration tab...click on subtab "firmware upgrade" and choose the correct .bin file...click on upgrade....Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now,press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

URGENT- problem in detecting audio device using JMF in WIndows7 - 64 bit

Hi,
I am trying to detect the audio device in windows 7 -64 bit OS, using JMF API with JRE 1.6.18.But it showing zero device found.below i have mentioned the source code that i have used.please suggest how to solve this , thanks in advance.
import java.util.ArrayList;
import java.util.Vector;
import javax.media.CaptureDeviceInfo;
import javax.media.CaptureDeviceManager;
import javax.media.format.AudioFormat;
import javax.media.format.VideoFormat;
public class CaptureDeviceFinder {
//possible audio formats available
static String audioformats[] = {
AudioFormat.LINEAR };
static ArrayList available_audiolist= new ArrayList();
public static void main(String[] args) {
findAudioDevices();
}//main
public static void findAudioDevices() {
/ Audio capture devices /
System.out.println("CAPTURE AUDIO FORMATS:");
for (String format : audioformats) {
System.out.println("format is :"format);
Vector<CaptureDeviceInfo> devices = CaptureDeviceManager
.getDeviceList(new AudioFormat(format));
System.out.println("devices is"+devices);
for (CaptureDeviceInfo device : devices) {
if (!devices.isEmpty()) {
System.out.println("\tFormat: " format);
System.out.println("\t\t" device.getName());
available_audiolist.add(format"|"+device.getName());
System.out.println("list is :"+available_audiolist);
Edited by: Saravana4u on Mar 17, 2010 10:39 AM

almightywiz wrote:
Well, I don't know if the JMF Studio works on a 64-bit system, but the base java libraries work just as well as on a 32-bit system. I currently use both Windows 7 64-bit and 32-bit version, and I am able to recognize all of my audio input devices.JMF wraps around and makes use of a bunch of native interfaces, all of which are precompiled for 32-bit systems. As such, anything relying upon those 32-bit libraries will not work, and that cuts the functionality down to, essentially, the cross-platform pack stuff.
JMF's sound infastructure is mostly a wrapper around JavaSound, so as long as JavaSound is working on the JRE, you'll be able to utilize the audio functionality.
As for device detection, I know at least some of that is native code. I'm not 100% sure, but I'd almost expect the Windows performance pack to never return any devices on a 64-bit system, but the cross-platform back to return audio devices. This is an assumption, but, that's what I would expect.
In any case, if you're using the Windows performance pack, you'd most likely get better results by switching to the cross-platform pack.

Problem with detecting USB devices.. something abt ehci-hcd??

Hi All,
I have a DELL E6410 laptop. I have a problem with connecting USB devices.
Whenever a power event (such as connecting/disconnecting of AC adaptor) happens, my laptop stops detecting any USB devices and any changes that happen on the USB ports. That is, say an external mouse is connected to the laptop, the mouse stops functioning, and if I connect a mouse/USB_stick or any such thing to the computer, the device is not detected.
dmesg output show that any connecting/disconnecting events are not detected by the computer. lsusb output too shows the same thing.
To solve the problem, I need to rmmod the module ehci-hcd and modprobe it back. That is, I have to run the commands rmmod ehci-hcd followed by modprobe ehci-hcd. Then, this problem goes away until the next power event happens.
This event does not happen all the time, but it happens very regularly.
Here are the kernel and laptop specs..
uname -a
Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64 Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz GenuineIntel GNU/Linux
Kindly help me on this issue.
Thanks

This is the output of kernel.log when I unplug my AC adaptor with the external USB mouse connected.
Sep 12 11:18:33 localh ost kernel: [ 591.015557] EXT4-fs (sda6): re-mounted. Opts: commit=600
Sep 12 11:18:37 localhost kernel: [ 595.478866] ehci_hcd 0000:00:1a.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.478919] ehci_hcd 0000:00:1a.0: PME# enabled
Sep 12 11:18:37 localhost kernel: [ 595.498827] ehci_hcd 0000:00:1d.0: PCI INT A disabled
Sep 12 11:18:37 localhost kernel: [ 595.498877] ehci_hcd 0000:00:1d.0: PME# enabled
After this the the mouse goes dead (the light on the mouse also goes off).
If I disconnect the mouse at this stage, there is no change in kernel.log. If I the mouse back too, there is no change in kernel.log.
Now, when I turn the AC adaptor on, this is the output on kernel.log
Sep 12 11:22:16 localhost kernel: [ 813.917712] EXT4-fs (sda6): re-mounted. Opts: commit=0
Sep 12 11:22:16 localhost kernel: [ 813.977405] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.977453] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980838] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 813.980874] NMI watchdog enabled, takes one hw-pmu counter.
Sep 12 11:22:16 localhost kernel: [ 814.075104] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem 0xd6970000-0xd69703ff] (PCI address [0xd6970000-0xd69703ff])
Sep 12 11:22:16 localhost kernel: [ 814.075148] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Sep 12 11:22:16 localhost kernel: [ 814.075189] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:16 localhost kernel: [ 814.075256] ehci_hcd 0000:00:1a.0: PME# disabled
Sep 12 11:22:16 localhost kernel: [ 814.075279] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 12 11:22:16 localhost kernel: [ 814.075295] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.228224] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem 0xd6950000-0xd69503ff] (PCI address [0xd6950000-0xd69503ff])
Sep 12 11:22:17 localhost kernel: [ 814.228246] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Sep 12 11:22:17 localhost kernel: [ 814.228273] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
Sep 12 11:22:17 localhost kernel: [ 814.228310] ehci_hcd 0000:00:1d.0: PME# disabled
Sep 12 11:22:17 localhost kernel: [ 814.228324] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 12 11:22:17 localhost kernel: [ 814.228333] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 12 11:22:17 localhost kernel: [ 814.614404] usb 2-1.1: reset low speed USB device number 3 using ehci_hcd
At this point, the mouse comes back to life (its light begins to glow) and I can move the mouse pointer on the screen.
The output of the grep command that rwd gave is too big (16000 lines) to be pasted here..
Thanks,

Can I connect two firewire devices?

Ideally, I need two firewire devices running at the same time: One camera to capture footage and one firewire external hard disk for the media files (about 160 GB).
a) I've been told that I need a firewire external disc, because a USB hard disk would slow down the editing in Final Cut. Is this true?
b) If so, can I connect two firewire devices to my MBP (74.53 GB internal hard disk), which has only one 400 Firewire port?

1. Yes, FireWire is faster than USB. However, it would be better to edit on your main hard drive. Use the external drive just for storage and backup.
2. You can chain up to 255 FireWire devices provided the total power requirements did not exceed the port's capabilities. A single FireWire drive and a camera shouldn't be a problem. However, you should know that some FireWire cameras may not play well with other FireWire devices. If you find apparent problems when both are connected to the port, then you may need to use each separately. In this case you may need to put the hard drive on a USB port while the camera is connected to the FireWire port unless the camera also supports transfers on USB 2.0.

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

Problem on connect to two servers with SSL

Hey all!
I've got a problem with connecting to two different servers via SSL in one Application. Every Connection works fine on its one via SSL.
But if i try to initialize a new connection it fails every time.
My thought is that the problem is the DriverManager. I'm not quite sure how this DriverManager works, but what i know is that it's a single-ton Class and with that maybe stores some parameters from the first connection which didn't get reloaded when trying to make a new connection.
Here's the way i create the connection ..
    String host="best.host.ever";
    int port="3306";
    String MYSQL_URL="jdbc:mysql://"+this.host+":"+this.port+"/";
    DBName="db_foobar";
    sqlProps = new Properties();
    sqlProps.setProperty("user","foo");
    sqlProps.setProperty("password","bar");
    sqlProps.setProperty("zeroDateTimeBehavior","convertToNull");
    sqlProps.setProperty("useSSL","true");
    System.setProperty("javax.net.ssl.trustStore", trustStore);
    System.setProperty("javax.net.ssl.trustStorePassword", "trustpass");
    System.setProperty("javax.net.ssl.keyStore", keyStore);
    System.setProperty("javax.net.ssl.keyStorePassword", "keypass");
    System.setProperty("javax.net.debug","ssl");
    printDebug("[Konstruktor] : Connecting to "+MYSQL_URL);
    try {
         Class.forName("org.gjt.mm.mysql.Driver").newInstance();
         this.conn = DriverManager.getConnection(MYSQL_URL+DBName,sqlProps);
        connectionCount++;
        initOK=true;
    //Catch stuff following...Is it possible that the System.properties i'm setting are only readed one time by the DriverManager (if it's readed by the DriverManager at all)?
So when i initialize a new Object with different System.properties they may not get used again.
Hopefully somebody has an explanation or a solution for this.
Besides: If i launch the programm twice it's no problem to have to differen SSL connections at the same time.
Thanks for reading and in advance for trying to help!

Yep, it's the standard authentication failure message. (The error code is 1045).
The Exception which is thrown is a SQLException with the message:
Access denied for user 'username'@'p54BB743D.dip.t-dialin.net' (using password: YES)
errorcode: 1045
The code i'm using runs well with one connection and even with multiple connections as long as not more than one connection are using SSL.
To explain:
The user has the possibility to run the application with a user defined data-source (the connection). You can add a new connection and the application will then add a tabbed pane with the same gui but uses the other data source then.
This runs fine with multiple connections (I managed to work on 3 differen intranet servers and 2 different servers online, one of them using SSL)
So all together 5 Connections. Now i wanted to add a 6th server with SSL two and thats the point where it crashes. (Both SSL Servers run perfect on their own with my application - only both together doesnt work).
About that: Class.forName, yes i'm using it every time when i make a new Connection. This is wrong? Could you explain why?
Anyway thanks for your answers so far!
Message was edited by:
Hotkey_ger

Problem about using Oracle Form 6i to connect Oracle Database 10g express.

Sorry to interrupt all of you.
I have encountered a problem about using Oracle Form 6i to connect Oracle Database 10g express.
As I would like to
I use Oracle Net8 Easy Config to create a connection.
According to "tnsnames.ora", the paramater of connection is as follows;
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA = (SID = XE))
Unfortunately, when I use Oracle Net8 Easy Config to test the connection, an error message is prompted as follows:
Connecting....
The test did not succeed.
ORA-03106: fatal two-task communication protocol error
There may be an error in the fields entered
or the server may not be ready for a connection.
You can check the server and retry, or continue.
After I google it, I still have no idea how to solve the problem. I would like to ask, could anyone mind providing some hints or solution to address the issues.
Thanks for your assistance in advance.

I don't believe the Net8 Easy Config (NEC) will create a compatible entry in the tnsnames.ora. I have Forms 6i running successfully against a 10g Express database, but I did not use the NEC - I created the entry myself. Here is the entry I use:
XE=
(DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=<<servername or IP address>>)
      (PORT=1521)
    (CONNECT_DATA=
      (SERVER=dedicated)
      (SERVICE_NAME=XE)
)Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Urgent Problems about connect two devices

Similar Messages

Maybe you are looking for