Urgent: Problems in Transports

Hi Gurus,
My requirement is to transport all the activated objects from BW Dev to QA but while activating the objects I have not stored them in Zpackage(own) but rather in Local Object $TMP . would anyone please suggest me how to move all the objects in $TMP to my own Package. I appreciate it in Advance.
"I gurantee of award points for good answers"
Thanks and regards
Kishore

Try to look for any Z* transportable package in your system, maybe someone did the work for you before ;).
In se80 transaction you can create a package for transporting. Choose package from drilldoun and press enter (system will ask you to create if no exist).
In the next dialog it is very important that you assign to it a transport layer.
After that in transport conection in rsa1 you have several settings. Grouping (before or after data flow, necesary objects) and collect (automatically option select all object automatically).
Drag and drop a cube from example to the left side of window, then objects matching grouping option will be dropped too, choose those that you want to transport.
Press the truck button, system will ask change package for all $TMP objects (select yours) after that system will ask to create a transport request.

Similar Messages

Problem in transport...its urgent

Hi SAP gurus,
Here i am facing problem with transports.
I am importing one request into production system,but suddenly it got hang.
i don't know what needs to be done to fix this
Since it is in production system.please give me any suggestion ASAP
Thanks & Regards
Kumar

Hi,
When transport request hangs please check the below points.
1) RDD* jobs are running or not in your SAP system.
2) At least one background job should be available.
3) Check the STMS consistency check.
4) You have to make sure your file system( Trans directory) should have enough space.
5) You have to make sure TP process is running at OS level.
And also check the logs at trans directory.
I hope it will help you.
Regards,
Kiran .V

Problem in transporting WPC Content

Hi,
I am facing problem in transporting WPC Content from server1 to server2. After transport the webpages are not displaying the contents. Webpages are showing empty layouts. I have done the layout configurations. Webpages are cotaining iViews and Html contents from KM . The webpages are not allowing to edit. Its very urgent.Help me to get through this.
Regards,
Mallini.V

Hi MaliniV,
Before you transfer the WPC content from one server to another, you need to be very careful about the settings and configurations. Did deply the WPC on the other server ? Did u do any custom page layouts in development server ? if yes, you need to do the same in production server as well. if not , it won't work.
I too had the same problem before. but ! after checking all these , I corrected them.
I hope this will help u.
Thanks
Suresh

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Urgent: Problems in Generic Extraction by Function Module

Hi BW Gurus,
I am new to SDN and also new to generic extraction using function module. My requirement is to extract long text(142 char) from CRM to BW as the text is not stored in database table I used function module read_text with in another ZXXX function module copy of (RSAX_BIW_GET_DATA_SIMPLE). In my extract structure I used GUID(char,32), Langu, long text(142 char) and 2 placeholders. Text can be extracted by passing STXH table fields(Tdname, Tdid, Tdobject, Tdspars) to read_text as parameters and i also need to use CRMD_ORDERADM_H field GUID(32 char) to compare 1st 32 chars of tdname(70 char) with Guid to select Guids and loop thru this Guids and for each Guid i need to append lines of text to e_t_data but as i donot know ABAP i unable to write the code for this. Through my friends help i wrote code when i check in RSA3 it is displaying the text but when i replicate into BW and load into data target in monitor the status is red with records initially but afterwards it will be red status again with 0 from 0 records for initial load again.when i check on job logs the errors i have are:
The background job has created a job log file of 2Gb size and it is currently on a infinite loop writing entries into the SAP System Log that it cannot write to the Job log file due to Error 22 for write/read access to a file this is because of the datasource i have created. Please find my Function module and if anyone would please correct FM and send me that will be really great.I appreciate it in advance.
MY Function Module is:
FUNCTION Z_CRMORDERH_STR_TXT.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YCRM_TEXT_STR OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
***" EXCEPTIONS     NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Tables: CRMD_ORDERADM_H, STXH.
Auxiliary Selection criteria structure
data: l_s_select type srsc_s_select.
Maximum number of lines for DB table
Statics: s_s_if type srsc_s_if_simple,
counter
         s_counter_datapakid like sy-tabix,
Cursor
         s_cursor type cursor.
data: i_crmtext type standard table of TLINE .
types: begin of xsreph ,
          GUID type CRMD_ORDERADM_H-guid,
        end of xsreph.
   data: i_guid type standard table of xsreph.
data: I_TEXT type STXH-TDNAME.
data: xempl like YCRM_TEXT_STR occurs 0 with header line.
data: t_tab like dd03l-tabname.
Select ranges
ranges: l_r_guid for CRMD_ORDERADM_H-guid.
         l_r_connid for sflight-connid.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
if i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    case i_dsource.
      when 'yCRM_TEXT'. " for S_SREPH1
      when others.
        if 1 = 2. message e009(r3). endif.
this is a typical log call. Please write every error message like this
        log_write 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                i_dsource   "message variable 1
                  ' '.                 "message variable 2
        raise error_passed_to_mess_handler.
    endcase.
   append lines of i_t_select to s_s_if-t_select.
Fill parameter buffer for data extraction calls
    s_s_if-requnr    = i_requnr.
    s_s_if-dsource = i_dsource.
    s_s_if-maxsize   = i_maxsize.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
   append lines of i_t_fields to s_s_if-t_fields.
we will do our selection based on what is in the p table for the
infoobject
else.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    if s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
    LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GUID'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_GUID.
        APPEND L_R_GUID.
      ENDLOOP.
      case i_dsource.
        when 'YCRM_TEXT'. " for S_SREPH1
          t_tab = 'CRMD_ORDERADM_H'.
      endcase.
      select GUID
      from (t_tab)
      into table i_guid where   PROCESS_TYPE = 'ZACI' and ( OBJECT_ID < '0000000042').
     select tdname from stxh into i_text where tdobject = 'TEXT'.
     if sy-subrc ne 0.
       message e009(r3).
this is a typical log call. Please write every error message like this
       log_write 'E'                  "message type
                 'R3'                 "message class
                 '009'                "message number
                 i_dsource   "message variable 1
                 'No master data found'.           "message variable 2
       raise error_passed_to_mess_handler.
     endif.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
     open cursor with hold s_cursor for
     select (s_s_if-t_fields) from CRMD_ORDERADM_H
                              where GUID in L_R_GUID .
                               ENDIF.
Fetch records into interface table.
named E_T_'Name of extract structure'.
   fetch next cursor s_cursor
              appending corresponding fields
              of table e_t_data
              package size s_s_if-maxsize.
    IF SY-SUBRC <> 0.
     CLOSE CURSOR S_CURSOR.
     RAISE NO_MORE_DATA.
   ENDIF.
as we are doing this only once can use the select statement.
***data: crmtext like tline occurs 0 with header line.
**data: i_crmtext type standard table of TLINE.
**data: i_guid type standard table of xsreph.
data: l_guid type THEAD-TDNAME.
data: st_guid type xsreph.
data: st_crmtext type TLINE.
data: lan type THEAD-TDSPRAS.
lan = 'E'.
loop at i_guid into st_guid.
l_guid = st_guid-guid.
CALL FUNCTION 'READ_TEXT'
   EXPORTING
   CLIENT                        = SY-MANDT
     ID                            = 'A002'
     LANGUAGE                      = lan
     NAME                          = l_guid
     OBJECT                        = 'CRM_ORDERH'
   ARCHIVE_HANDLE                = 0
   LOCAL_CAT                     = ' '
IMPORTING
   HEADER                        =
   TABLES
     LINES                         = i_crmtext.
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
e_t_data-guid = l_guid.
loop at i_crmtext into st_crmtext.
move lan to e_t_data-langu.
move st_crmtext-tdline to e_t_data-description.
append e_t_data.
endif.
endloop.
clear: st_guid,l_guid.
refresh: i_crmtext.
endloop.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
endif.
ENDFUNCTION.
please Gurus as I donot know ABAP i appreciate if anyone would write a FM based on requirement and send me that will be really great this is my request. I gurantee of award points for good answers.
Regards
Kishore

Hi,
The statement <b>RAISE NO_MORE_DATA</b> should be active (uncommented) in your code. Otherwise, the infinte loop occurs.
See also, the Siggi's blog:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
BTW, was it your thread here:
Re: Urgent: problems in extracting Long Text
Best regards,
Eugene

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

Problem during transport

Dear All,
Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
The error is "Request after end mark"
One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
Thanks for ur help....
regards;
jee

Hi,
The "Request after end mark" will be displayed due to the following:
Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Urgent problem, mate

Hello experts:
     Thank you in advance for all your replies.
     there is a function--- ENQUEUE_EFPAYR failed with exception 8, who know the possible reason,   how a function raise an exception, how to locate where it is , search by raise ? please
help me with that urgent problem .
      couldn't thank you more.
Best regards.

Hi,
The ecxeption no 8 corresponds to the 8th exception that is listed in the exception tab of the FM when you open the FM in SE37.
Exceptions are raised inside the FM . The syntax is 'RAISE <EXCP> .' where <EXCP> is the name of exception.
For the enque FMs if you search for term 'raise' in the code you may not find the place where it is raised, as this FM calls some forms within it that are not part of the function groups so cannot be searched directly. You can debug it with breakpoint at statement 'RAISE' to locate it.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

*URGENT* Problem in SOP

Dear gurus,
We face a very urgent problem in our Sales & Operations Planning, any help is greatly appreciated.
We created a planningtype based on an underlying infostructure. (trx MC8A)
The problem we now have is that some numbers that we see in the infostructure table (using trx SE16), do not appear in the planningtype with trx MC94/MC95.
How is this possible??
Thanks for your thoughts!
Rgds, AJ

Problem solved itself. As always: masterdata..!

Urgent problem: grouping by fields of internal table

Hi friend,
i have a urgent problem and i hope that you can help me out:
i have an internal table containing data, and i sorted it by 3 fields.
now what i want to do is kind of grouping that means that all the lines that are the same should be written into another internal table like this:
A
A
B
B
B
C
D
would give me:
A                       1
A                       1
B                       2
B                       2
B                       2
C                       3
D                       4
How could i do this ( especially avoiding nested loops ? ) Is there a handy trick to do this efficiently ?
thank you, i will give points immediately,
Clemens

Hello,
The field position is important for the fields that are using in the control break statements..Also SORT internal table is required.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb381a358411d1829f0000e829fbfe/content.htm
DATA: BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
WERKS TYPE WERKS_D,
VALUE TYPE NETPR,
END OF ITAB.
ITAB-MATNR = 'ABC'.
ITAB-WERKS = '0100'.
ITAB-VALUE = '10.00'.
APPEND ITAB.
ITAB-MATNR = '1ABC'.
ITAB-WERKS = '0100'.
ITAB-VALUE = '10.00'.
APPEND ITAB.
SORT ITAB BY MATNR WERKS.
LOOP AT ITAB.
AT FIRST.
WRITE : 'AT FIRST'.
ENDAT.
AT NEW MATNR.
WRITE : 'AT NEW MATERIAL NUMBER'.
ENDAT.
AT END OF MATNR.
SUM.
WRITE: / ITAB-MATNR, 'MATERIAL TOTAL - ', ITAB-VALUE.
ENDAT.
AT END OF WERKS.
SUM.
WRITE: / ITAB-WERKS, 'PLANT TOTAL - ', ITAB-VALUE.
ENDAT.
AT LAST.
WRITE : 'AT LAST'.
ENDAT.
ENDLOOP.
Regards,
Deepu.K

Urgent Problem:Upgrade intermedia (Waiting online)

Hi ,friends
I have an urgent problem needed to be confirmed right now becasue it influence on our project
decision.
We planed to uograde interMedia from 8.1.6 version to 9i r2 version.And precondition is that current oracle database(8.1.6.0.0 ) can't be upgraded to 9i becasue our client don't want to do it.Hence,do you consider it's possible?
And how much cost if possible?
Furthermore,can you tell me or give me some evaluation report that I can earn any benifit on Performance and precise(Chinse fulltext search) by upgrading?
Thanks in Advanced!

Is this interMedia text?
If so, please post your question in the Oracle Text forum, since interMedia text is now Oracle Text.
This forum is reserved for multimedia issues.
THe text experts monitor the Oracle Text forum.

Urgent Problem - Flash Player does not display movies correctly.

Hi.
I have an urgent problem that I need help with. I installed
Flash Player 9 on my computer and everything was o.k. The I
installed Flash 8 and it asked if I wanted to install the player
and I selected yes. Then when I went on the Web, I noticed on my
website that my Flash animations displayed only partially - none of
the backgrounds appeared and were just plain white. This only
occurs where the backgound is plain and not an animation. The weird
thing is, when I open the file when I'm not on the Web, everything
displays correctly. It's only when I'm on the Web that the problem
occurs. I've tried uninstalling all the Flash versions and
re-installing but that did not work. It is incredibly frustrating.
Can someone please tell me why when I open files whilst not on the
Web, they display correctly, but when I go to my website, the plain
backgrounds do not appear in the movies ?. And more importantly,
how do I fix this ?
Thanks

I've just been struggling with the problem for some hours and
I finally solved it. What I had to do was, from Internet Explorer
7, go to Internet Options then 'Advanced' then click 'Reset' to
restore all defaults. After doing this the flash played correctly.
I then had to re-configure Internet Explorer to perform to its
previous style. I also went from 'Internet Options' to 'Programs'
and then clicked 'Manage Add-Ons'. I found that by disabling the
'Realplayer download and record plugin for Internet Explorer' the
problem was solved, and when I enabled it, the problem reappeared.
So it has obviously got something to do with this plugin. I hope
this helps for anyone else who could suffer from this problem. It's
worth a try if all else fails - simply reset Internet Explorer 7 to
restore the defaults, and then find out what caused the problem.

Urgent: Problems in Transports

Similar Messages

Maybe you are looking for