URGENT-Process Chain - transport error

Hi
I am facing a problem in process chains
when I tranport to quality system my chains are not activated after importing it is raising the error as
Error in remote call of destination ABAP Connection
Message no. RSPC051
Diagnosis
The following error occurred during the remote function call for destination ABAP Connection:
Name or password is incorrect (repeat logon)
System Response
A short dump has probably been written in the other system.
Procedure
Look at the short-dump overview in the other system.
I am unable to get the solution!!!!! how to activate the chains in Quality.........It sreally urgent

hi,
chk the start variant of ur process chain whether an start immediate is choosen, if so change it to some date in future and try to transport.
Ramesh

Similar Messages

  • Process chain Transport error in BI7

    Hello All,
                  We are facing an error while importing a transport request in the BI7 system. The objects collected  in the transport request are
    InfoPackage
    Process chain
    Process variants
    Table Contents
    The error which we are facing is as follows,
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
    Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
    Kindly let us know if you had faced similar problem before.
    regards,
    Chandran

    Hi Chandran,
    I think that if you expand the transport/import log further there will be a more detailed error message. Can you
    check this? If yes can you let us know what the error message text and error code is? It might be the case that
    the note 659160 is relevant for the problem.
    Best Regards,
    Des.

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • Problem with a process chain transport

    Hi all,
      I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I don’t see it, I did it four times but nothing happen and I don’t have errors.
      Can anybody tell me how to transport a process chain.
    Thanks.

    Hi Federico,
    When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
    Hope it will help you to resolve the problem.
    Regards,
    Raji

  • Process Chains transport query

    Hi Experts,
    When we transport a process chain  from rsa1, does not all its varients get transported along with it  , do we need to collect them separately,
    Please help.
    Thanks in Advance,
    Nitya

    Hi Nitya,
    You will have to collect each & every process in the process chain. Better way to collect all processes in PC is:
    goto RSPC & open your PC--> From the Menu Process Chain --> Transport.
    Now all the dependent objects will be opened. Display it as List > Now select all the required Variants like start variant, and any other variants like AND, OR, DSO activation etc & right click only on the required objects> Transport all below.
    Hope it helps!
    Regards,
    Pavan

  • Process Chain Transport import error

    Hi
      I created a Process chain with Start variant "Start Using Meta Chain or API" and collected all the objects of process chain  in a transport request
    The Transport import failed with RC 8 error
    Error Log:
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
    0 Chains Were Selected
    Specifying process chain ID 'XXX, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
    Please update me what  is the reason of error and how to resolve this
    Thanks

    It sounds to me like process chain (PC) that's starts up PC that you trying to transport is not present in target system yet ?
    Might be that there is a link between them...

  • URGENT:Process Chains And events Related

    Hi All,
                  I have created a new process chain which is a normal ODS Process Chain.For that I started with the start Process and then created event in sm62 to trigger the start of process chain.Similarly,I have at the end of the process chain ,I have added 2 ABAP Programs ,one to mark the successful completion of process chain and another to mark the Error or Unsuccessful completion.For these programs,I maintaines Processvariants and here, we have utility Programs.So used the relevant utility program and created a program variant and Events ,One for successful completion of process chain and another to mark the Error or Unsuccessful completion.
    But ,Now ,I find that when I trigger the eventin sm64,I find that the process chain is not being run.Is that any problem with the events I created.This is the first i am involved  with creation of events in SM62.Can anyone help me in  this regard.
    Can anyone,tell me thatdo we need to do anything else apart from  Creating events .Imean like assigning jobs and then Programs in the Step of that Job.
    Please Kindly help me in this regard.It is very very urgent for me.Thank you.Points will be assigned.
    Regards,
    Samir

    Hi,
    I have tried in the same way you have said .I have maintained as after event and activated and scheduled.after that  i triggered the event insm64.But still,I am not able to see the Load in RSMO.
    I have just checked out in sm37.And found that some jobs have failed.I think this might be the reason for the Process chain to not run.
    I am just pasting the error msg and solution.
    Job BI_PROCESS_ABAP, waiting for event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F, has no predecessor
    Message no. RSPC003
    Diagnosis
    Although job BI_PROCESS_ABAP has been started by event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F and is recognized in the process chain, the current run for this process has no job preceding it.
    This is why the system was unable to determine a log ID, and the chain is broken.
    System response
    The job has been terminated.
    Procedure
    With the exception of the start process, each process must have a process that precedes it.
    Then Another error for the another cancelled job is
    Job BI_PROCESS_OR, waiting for event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF, has no predecessor
    Message no. RSPC003
    Diagnosis
    Although job BI_PROCESS_OR has been started by event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF and is recognized in the process chain, the current run for this process has no job preceding it.
    This is why the system was unable to determine a log ID, and the chain is broken.
    System response
    The job has been terminated.
    Procedure
    With the exception of the start process, each process must have a process that precedes it.
    Please kindly help me if you understand the problem.
    Thanks,
    Samir

  • Process chain scheduling error( Job BI_PROCESS_DROPINDEX could not schedule

    Hi,
    I am scheduling the process chain but it was throwing an error.
    Job BI_PROCESS_DROPINDEX could not be scheduled. Termination with returncode 8
    Message no. RSPC065
    Diagnosis
    Program RSPROCESS is to be scheduled as job BI_PROCESS_DROPINDEX under user ALEREMOTE.
    System Response
    Scheduling terminated with return code 8. The meanings of the return codes are as follows:
    SY-SUBRC = 4:
    Scheduling terminated by user
    SY-SUBRC = 8:
    Error when scheduling job (JOB_SUBMIT)
    SY-SUBRC = 12:
    Error in internal number assignment
    Procedure
    Check the system log for more detailed information.
    Execute Function
    for this i have already checked
    in RSPC menu tab
    Process Chain >> Attributes >> Execution User
    Choose "BW Background User" which should be ALEREMOTE.
    above settings i have done.
    even though when i am scheduling the process chain  i am getting the same error
    thanks
    suman

    Suman,
    You are not able to schedule it b'coz it is getting scheduled from user RFCUSER whereas the background user should be ALEREMOTE.
    There is an option somewhere in the Menu bar in RSPC to change the Execution user. Please change that to ALEREMOTE,
    Please check whether your BW user has enough authorization to run this job. The above post tell you how to do it.

  • Send process chain in error by abap

    Hi all,
    I want to send in error my process chain by abap code, because i've a routine in transfer structure and on the particular conditions this code must stop the load.
    How to send in error my process chain by abap?
    The following code send in error the infopackage but not the routine in trasfer roule.
    l_s_errorlog-msgid = 'Z_my_message_class'.
    l_s_errorlog-msgty = 'E'.
    l_s_errorlog-msgno = '001'.
    APPEND l_s_errorlog TO g_t_errorlog.
    thanks,
    Alessandro

    Alessandro
    Check this link. It may give some info.
    Thnaks
    Sat
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ee14e25d-0501-0010-11ad-8eb2861a7ec0 [original link is broken]

  • Process chain - After error ABAP - trigger a metachain start does not work.

    Hi,
    I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
    Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
    Many Thanks,
    L.

    Hi,
    the problem is not the ABAP Program.
    I have the following situation:
    A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
    Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
    This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
    In the ABAP program in order to force the status red we have the following code:
    MESSAGE e162(00) WITH 'Status' 'Red'.
    Any idea?
    Thanks,
    Veronica

  • Process chain activation error in BI7...

    hi gurus,
    we are creating process chain for master data for
    0PROMOTION_ATTR
    0PROMOTION_TEXT
    0SALESORG_ATTR
    0SALESORG_TEXT
    0CUSTOMER_ATTR
    0CUSTOMER_TEXT
    0VTYPE_TEXT
    0DIVISION_TEXT
    0SALES_GRP_TEXT
    0DISTR_CHAN_TEXT
    0CUST_GROUP_TEXT
    0SALES_OFF_TEXT
    0MATL_GROUP_TEXT.
    we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
    while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
    Chain has no starter. Add a starter.
    Message no. RSPC020
    Diagnosis
    The process chain has no start-process. A process chain always requires exactly one general starter.
    System Response
    The system is unable to activate the process chain.
    Procedure
    Add a general starter to the chain, and schedule it as the first process in the chain.
    please suggest me how to rectify the problem.
    regards

    Hi Harish,
    Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
    If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
    Regards
    Srini

  • Process chain creation: error:

    Hi,
    i am creating process chain for the data upload of three info packages!
    Two are master data IPs and one is transactional data IP. ( Requirement is to make single process chain for the master data and transactional data ).
    Before transactional data upload, i had included the process delete indexes.
    When i check the process chain, it says:
    "process DROPCUBE variant is referenced but not in the chain "
    May i know what is wrong with this process flow? i had actually done similarly in dev system it was not giving any error:
    Please suggest me
    Thanks,
    Ravi

    Hi Ravi,
    Did you go for Meta chain, if not please try that. Be a bit clear on the question.
    regards,
    ashok.

  • First DTP in Process chain giving Error "CX_RSB_WRITE_ERROR"

    Hi All,
    I am facing a problem when I execute a process chain.
    I have a master process chain and 3 sub process chains. Each of these sub process chains are having some DTP in it in a sequential order. These DTP's are Independent of each other, so even if the first one gives you errors, the remaining ones will get executed.
    These DTP's are used to put some files in to the Open Hub Destination, which is the application server, using logical files names.
    now the problem is that, when i execute the master Process Chain, the first DTP in each of the sub Process chains are getting failed by giving an error. the error is as follows.
    Error : Uncaught_exception.
    Exception : CX_RSB_WRITE_ERROR
    Any idea in how to correct this? Any help in this regard will be highly appreciated.
    Thanks
    Ajith

    You might have missed some parameters in the FILE transaction.
    Check the below links so that u may get idea wht u missed out.
    Re: Can any one tell me how to write open hubs to application server?
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
    This might not be an security or authorization issue if u did not face such issue earlier. if so check with BASIS and add security roles to the generic user.

  • Process Chain Authorisation Error.

    Hi All,
    While i am executing process chain i am getting error message " You don't have the authorization for  infosource...........".
    Can anybody tell ,what i have to do to resolve this issue.
    Thanks in Advance...
    Points assigned.

    hi,
    Looks like an authorization issue.Please check if you have authorizations for all the objects used in the process chains like execute infopackages, infosources and data targets where you are trying to load data.
    hope it helps,
    regards,
    Parth.

  • Process Chain : Communication error

    Hi, i have DataSource from UDConnect and working good loading data, but when use the InfoPackage in Process Chain then have the Error :
    <b>Communication error: Incoming call is not authorized</b>
    Any idea for help me in detect the problem ?

    Hi any can help in tris problem, only happen in data from UDConnect, the user is BWREMOTE, i test using user by SAP_ALL and not working.
    Any idea the Autorization for UDConnect when using Process Chain ?

Maybe you are looking for