Urgent Process chain

Hi experts,
              can any one tell me how to copy the process chain with step by step info
thanx regards
rajesh

Hi Rajesh Y 
Jus click on u r process chain in RSPC and then Just put "COPY" in the
command tool bar..
it will promt for a name..give it and say continue..
by the way this avilable only in Bi 7.0 ..
Hope itz helps a little..!
Cheers
Kishore M Reddy
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi experts,
>
> can any one tell me how to copy the
>  process chain with step by step info
>
> thanx regards
> rajesh

Similar Messages

  • URGENT:Process Chains And events Related

    Hi All,
                  I have created a new process chain which is a normal ODS Process Chain.For that I started with the start Process and then created event in sm62 to trigger the start of process chain.Similarly,I have at the end of the process chain ,I have added 2 ABAP Programs ,one to mark the successful completion of process chain and another to mark the Error or Unsuccessful completion.For these programs,I maintaines Processvariants and here, we have utility Programs.So used the relevant utility program and created a program variant and Events ,One for successful completion of process chain and another to mark the Error or Unsuccessful completion.
    But ,Now ,I find that when I trigger the eventin sm64,I find that the process chain is not being run.Is that any problem with the events I created.This is the first i am involved  with creation of events in SM62.Can anyone help me in  this regard.
    Can anyone,tell me thatdo we need to do anything else apart from  Creating events .Imean like assigning jobs and then Programs in the Step of that Job.
    Please Kindly help me in this regard.It is very very urgent for me.Thank you.Points will be assigned.
    Regards,
    Samir

    Hi,
    I have tried in the same way you have said .I have maintained as after event and activated and scheduled.after that  i triggered the event insm64.But still,I am not able to see the Load in RSMO.
    I have just checked out in sm37.And found that some jobs have failed.I think this might be the reason for the Process chain to not run.
    I am just pasting the error msg and solution.
    Job BI_PROCESS_ABAP, waiting for event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F, has no predecessor
    Message no. RSPC003
    Diagnosis
    Although job BI_PROCESS_ABAP has been started by event RSPROCESS 489W6WH6I7OHV7BL3N9909F7F and is recognized in the process chain, the current run for this process has no job preceding it.
    This is why the system was unable to determine a log ID, and the chain is broken.
    System response
    The job has been terminated.
    Procedure
    With the exception of the start process, each process must have a process that precedes it.
    Then Another error for the another cancelled job is
    Job BI_PROCESS_OR, waiting for event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF, has no predecessor
    Message no. RSPC003
    Diagnosis
    Although job BI_PROCESS_OR has been started by event RSPROCESS 489WC2QYBC4AJSYILQ10TWABF and is recognized in the process chain, the current run for this process has no job preceding it.
    This is why the system was unable to determine a log ID, and the chain is broken.
    System response
    The job has been terminated.
    Procedure
    With the exception of the start process, each process must have a process that precedes it.
    Please kindly help me if you understand the problem.
    Thanks,
    Samir

  • Urgent: Process Chain Priority Pop-Up

    Hi,
    We are trying to schedule a process chain from an abap program using the function module RSPC_CHAIN_START. But on execution a pop up is appearing to set the job priority. Is there any way to set this value through the program to avoid the pop-up or is there any other suitable function module that can be used to set this priority while scheduling the process chain.
    Thanks,
    Pratik.

    you must give the Priority before secheduling the PC only once. There will be A B & C Priorities & you can select any one of these so as to sechedule the chain.
    Regards
    Sivaram Daggubati

  • URGENT-Process Chain - transport error

    Hi
    I am facing a problem in process chains
    when I tranport to quality system my chains are not activated after importing it is raising the error as
    Error in remote call of destination ABAP Connection
    Message no. RSPC051
    Diagnosis
    The following error occurred during the remote function call for destination ABAP Connection:
    Name or password is incorrect (repeat logon)
    System Response
    A short dump has probably been written in the other system.
    Procedure
    Look at the short-dump overview in the other system.
    I am unable to get the solution!!!!! how to activate the chains in Quality.........It sreally urgent

    hi,
    chk the start variant of ur process chain whether an start immediate is choosen, if so change it to some date in future and try to transport.
    Ramesh

  • URGENt --- Process chains

    Hi
    I have two questions.
    1. I need to make a BW load job dependent on a R/3 job.
       How to achive this is Process chains, please do give me the steps.
    2. This is bit tricky
    I have job A. Here I want to load this on etill pSA and then the process PSA to Data targets has to run only after midnight. SO till pSA it will finish by 10PM and I need to make one more dependency in such a way that pSA--->DAta target process runs at 00:01 Hrs.
    Thansk for your answers.

    Hi Meyyappan,
    try this:
    call function 'RSSM_EVENT_RAISE' destination 'yourBWid' (like RFCDISPLAY-RFCDEST)
    exporting
    I_EVENTID = EVENTID (like TBTCSTRT-EVENTID, you have to create it in BW in SM62)
    I_EVENTPARM = PARM. (like TBTCSTRT-EVENTPARM DEFAULT 'X')
    You would execute a report in parallel to your R/3 job; the report would check at a defined interval (parameters: waittime type i default '300'.
    "interval in seconds
    statement -> wait up to waittime seconds.
    "wait some time )
    if the job already has finished then raise (via RFC) a system event in the target BW system. That event can then be used by the BW scheduler to trigger the data pulls.
    Hope this helps.
    Bye,
    Roberto

  • Process chain problem...., its urgent

    Hi all
    in my process chain we are loading 4 loads into ODS. After 3 loads, 4th load didn't take place. its not yet started even 3rd one successfully ran. its not showing error also. what can i do. after 4th one ODS activation process is there.
    Please advice me. will i go for manual loading. if i do manual, what abt activation after 4th load. will i do activation also manual or else it will trigger automatically as part of process chain........../
    Advice me frnds..., its urgent
    Regards
    swetha

    Hi Swetha,
    Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
    You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
    Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
    In the opened popup click on the tab 'Chain'.
    In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
    1. copy the variant from the popup to the variante of table rspcprocesslog
    2. copy the instance from the popup to the instance of table rspcprocesslog
    3. copy the start date from the popup to the batchdate of table rspcprocesslog
    Press F8 to display the entries of table rspcprocesslog.
    Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
    Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
    1. rspcprocesslog-log_id -> i_logid
    2. rspcprocesslog-type -> i_type
    3. rspcprocesslog-variante -> i_variant
    4. rspcprocesslog-instance -> i_instance
    5. enter 'G' for parameter i_state (sets the status to green).
    Now press F8 to run the fm.
    Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
    Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
    Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
    Try this solution with your 3rd ODS..hope this will solve your problem for this instance. This is just a workaround.
    Before next scheduel of the process chain..remove the link between 3rd ODS and 4th ODS and then reconnect once again and activate the process chain and schedule it as per your schedule cycle. From next upload onwards everything works fine.
    Assign points if it is helpful.
    Regards,
    Sreedhar

  • Urgent:changing the Directory  of process chains

    HI SAP GURUS,
    I actually created some process chains in the notassigned nodes ,i want to assign them another directory in which all my other process chains.Can any body help me to sort this.Its very urgent
    thanks in advance
    Message was edited by:
            narendra kumar ragulakollu

    hi Narendra,
    try RSPC->choose your process chain, go to menu process chain-attributes-display component (shift+F11)-> a small screen 'assign display grouping will come out', choose the 'directory' you want. save the process chain and 'refresh'.
    hope this helps.

  • Urgent : Download file from Application Server via Process Chain.

    Hi Experts,
    My requirement is to download the file from Application Server to local work station using an ABAP Program .
    I want including the above ABAP program in a process chain to execute  the program daily,
    I tried to use ARCHIVFILE_SERVER_TO_CLIENT and GUI_DOWNLOAD but unfortunately both the above FM doesn't support to run through Process chain.
    Can any one of you help me to send the code which selects a file from application server, downloads to local system and deletes it.
    Thank you very much for spending your precious time in this regard.

    Hi Sailekha,
    Regarding your case ..
    I suggest you to create the program where it run this function: WS_DOWNLOAD.
    After it, the program is run by your process chain.
    Hopefully it can help you a lot.
    Regards,
    Niel.
    thanks for the points you choose to assign.

  • Issue in process chain (urgent)

    Hi guru's,
    i used customized abap program process type which was already created by somebody.
    i linked this process type to 2 process types based on the success and failure.
    on success of this process type it connects to another program process type , here there is no problem.
    if it is success.
    on failure i connected to attribute change run,
    but it is not continuing , it is stucking there.
    when i check in log view it is giving a msg " status of program xxxx is changed , do you want save the changes ?"
    if i press "yes" chain is continuing.
    but we dont want this , as this chain is scheduled in mid night
    user cannot interact to this msg.
    we want process chain run even if it is failed to next step without any user interaction. please help
    pramod

    Hi Pramod,
    It seems to be there is problem with links.
    Remove the links and relink the process steps.
    Now activate and schedule the process chain.
    I have experienced the similar problem in past.
    Hope this helps.
    -Subhashini

  • Error in Process chain( Urgent Please )

    error in Process chains:
    My Process Chain errors out in the step to activate the ODS after loading data inot it.
    The loading is correct and green. The Activation step errors out .
    Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
    I get message like this :
    Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
    Message no. RSMPC129
    Diagnosis
    Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
    System response
    The return structure is corrected and the data package is marked as incorrect.
    Message was edited by:
            Chris Gokul

    Chris,
    Looks like a request has not got deleted properly from the table :
    Options that you could look at :
    1. Delete all the data from the ODS and load again ( if that is an option )
    2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
    Also please mention your BI version and patch level.
    Arun

  • Urgent help regarding process chain error

    hi experts ,,
    one of the process chain is not running properly for last 5 days ....
    now current status of process chain is red ...and msg is last delta isrunning/has errors ..couldnt process request
    msg of yester days chain ........
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    error msg in bd87 (with idoc status 02 )
    tried to process idoc manually but it didnt happen ...throughing same error....
    one more thing here is same process chain status on 16th is in yellow status .....
    its in yellow status at dtp load step ....on right click on dtp_load variant --->in batch montior --->job overview
    dtp_laod job was is ready status ....
    i thought this status effecting others so tried to schedule the job couldnt ....
    so deleted job in confession....
    now and process which is bfr dtp_load is in yellow and whole chain is in yellow ....
    what shall i do now ??how to correct this ??
    shall run dtp manually and dso activation manually ???and shall i make process into green  status ???
    or shall retrive deleted job wit basis ppl help???
    please help me...
    whoever helps me to fix this issue will rewarded wit full points and i will be greatful to them ...
    Regars, \
    Harry...

    Yes, as rightly said you need to run the previous delta before updating new records in the latest request. If possible de-schedule the chains for a while, delete the old deltas (assuming you are using flexible updates?) and try to repeat the loads manually & proceed to activate & schedule once the delta has finished processing. If you still think this is an issue related to idocs processing, you can do the re-processing, provided they do not create fresh batch of idocs in the source system. You can re-process the idocs both inbound & out bound using reports like RBDAGAIN (But again, use extreme caution on these!). Please refer the #scn wiki on http://goo.gl/njVLS for more information on the idocs. For reprocessing please check this http://goo.gl/8aAcz. Thanks.

  • Process chain error - urgent

    Hi
    we have a process chain based on Funda management.
    we have the chain like start > load data(0PU_IS_PS_44 delta 0PU_IS_PS_42 delta>active data store data active data store data>AND>further processing further processing
    Here on 10th 0PU_IS_PS_42 delta is displaying yellow.
    and on 11th and 12th it is clear(i.e. every thing is greeen)
    we are loading data from dso to cube.
    when we check the data in cube on 10th it is not displaying data though the data mart symbol in dso mangae is displaying.
    my doubt is how to make the request from yellow to green,and how to get the data of 10th date in to the cube.
    I made the request red and repeat the process
    but it is not done
    please help me in this regard
    Boss can any one who can help me pls
    thanks in advance
    sridath
    Edited by: sridath on May 12, 2008 10:09 AM

    Hi,
    If you want to load the 10th data then you can do a selective load for that date. You have to go to your Infopackage/DTP in the Calday or any Date characteristic put a filter for 10th as date and load the data
    Hope this solve Ur issue.
    Rgs,
    I.R.K

  • Process  Chain (Urgent)

    HI Gurus,
    HI have a process chain called production daily process in these process chain we have 2 local chains.this process chain is not triggering from 2 days .and im selecting  first local chain to correct manually its showing some dump problem and if i open info package also its is showing the same problem plz give solution for this.
    IT IS SHOWING  LIKE DES
    ERROR:
    Runtime Errors         MESSAGE_TYPE_X                                                               
    Date and Time          05.09.2007 17:01:00                                                                               
    Short text                                                                               
    The current application triggered a termination with a short dump.                                                                               
    What happened?                                                                               
    The current application program detected a situation which really                              
         should not occur. Therefore, a termination with a short dump was                               
         triggered on purpose by the key word MESSAGE (type X).                                                                               
    What can you do?                                                                               
    Note down which actions and inputs caused the error.                                                                               
    To process the problem further, contact you SAP system                                         
         administrator.                                                                               
    Using Transaction ST22 for ABAP Dump Analysis, you can look                                    
         at and manage termination messages, and you can also                                           
         keep them for a long time.                                                                               
    Error analysis                                                                               
    Short text of error message:                                                                   
    Scheduler                                                                               
    Long text of error message:                                                                               
    Technical information about the message:                                       
       Message class....... "RSM1"                                                    
       Number.............. 000                                                       
       Variable 1.......... " "                                                       
       Variable 2.......... " "                                                       
       Variable 3.......... " "                                                       
       Variable 4.......... " "                                                                               
    ow to correct the error                                                           
       Probably the only way to eliminate the error is to correct the program.        
    If the error occures in a non-modified SAP program, you may be able to         
       find an interim solution in an SAP Note.                                       
       If you have access to SAP Notes, carry out a search with the following         
       keywords:                                                                               
    "MESSAGE_TYPE_X" " "                                                           
       "SAPLRSSM_LOAD" or "LRSSM_LOADU07"                                             
       "RSSM_RSREQDONE_READ"                                                                               
    If you cannot solve the problem yourself and want to send an error             
       notification to SAP, include the following information:                                                                               
    1. The description of the current problem (short dump)                                                                               
    To save the description, choose "System->List->Save->Local File             
       (Unconverted)".                                                                               
    2. Corresponding system log                                                                               
    Display the system log by calling transaction SM21.                         
          Restrict the time interval to 10 minutes before and five minutes            
       after the short dump. Then choose "System->List->Save->Local File              
       (Unconverted)".                                                                               
    3. If the problem occurs in a problem of your own or a modified SAP            
       program: The source code of the program                                        
          In the editor, choose "Utilities->More                                      
       Utilities->Upload/Download->Download".                                                                               
    4. Details about the conditions under which the error occurred or which        
       actions and input led to the error.                                                                               
    ystem environment                                                                 
       SAP-Release 700                                                                               
    Application server... "biprdn"                                                 
       Network address...... "10.20.0.8"                                              
       Operating system..... "AIX"                                                    
       Release.............. "5.3"                                                    
       Hardware type........ "00C6DDDD4C00"                                           
       Character length.... 8 Bits                                                    
       Pointer length....... 64 Bits                                                  
         Work process number.. 1                                                                  
        Shortdump setting.... "full"                                                                               
    Database server... "biprdn"                                                              
        Database type..... "ORACLE"                                                              
        Database name..... "BWP"                                                                 
        Database user ID.. "SAPR3"                                                                               
    Char.set.... "en_US.ISO8859-1"                                                                               
    SAP kernel....... 700                                                                    
        created (date)... "Jan 28 2007 20:40:17"                                                 
        create on........ "AIX 2 5 005DD9CD4C00"                                                 
        Database version. "OCI_102 (10.2.0.2.0) "                                                                               
    Patch level. 95                                                                               
    Patch text.. " "                                                                               
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."           
        SAP database version. 700                                                                
        Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5"                                                                               
    Memory consumption                                                                       
        Roll.... 16128                                                                               
    EM...... 12569760                                                                        
        Heap.... 0                                                                               
    Page.... 65536                                                                               
    MM Used. 4316536                                                                         
        MM Free. 4060576                                                                               
    User and Transaction                                                                               
    Client.............. 200                                                       
        User................ "SISLBW"                                                  
        Language key........ "E"                                                       
        Transaction......... "RSPC "                                                   
        Transactions ID..... " "                                                                               
    Program............. "SAPLRSSM_LOAD"                                           
        Screen.............. "SAPLRSPC_FRONTEND 0300"                                  
        Screen line......... 0                                                                               
    Information on where terminated                                                    
        Termination occurred in the ABAP program "SAPLRSSM_LOAD" - in                  
         "RSSM_RSREQDONE_READ".                                                        
        The main program was "RSPC_MAINTAIN ".                                                                               
    In the source code you have the termination point in line 41                   
        of the (Include) program "LRSSM_LOADU07".

    Hi Prashanth,
    Please look at SAP Note: 962365
    Hope it helps you.
    Cheers!
    Amit

  • Process chain--failed infopackage--urgent....

    Hi Experts,
    can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
    the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
    what could be the reason and how to make the process chain run successfully after it gets triggered.
    i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem.

    Hi Experts,
    can anyone tell me why the process chain when triggered has successfully started but the first infopackages after the start varient did not sucessfully run.
    the infopackages show in the process chain in yellow status as if the data loadings are taking place but when u go to the monitor screen the data loadings will not be taking place. if you manually trigger the infopackage then only the data loadings are taking place.
    what could be the reason and how to make the process chain run successfully after it gets triggered.
    i have deleted all the released jobs for all the processes in the process chain and triggered manually that chain but it is of no use. still the same problem is persisting, is there anything on BW part that we could or is it Basis work that needs to be done for the solution of this type of problem.

  • Process Chain issue-Needs urgent Help

    R/3 Master Data Main Chain
    Problem Description:
    When we trigger the process chain from SM64, the process chain fails at the step as shown below.
    There are no logs for the local chain i.e. the local chain fails without linking.
    If we manually schedule the local chain it runs successfully.
    The error message changed as and when we tried fixing the defects. Each of them with the solutions tried for them is explained below.
    ERROR 1:
    The error message which we got was as ‘Cannot Activate Job BI_PROCESS_LOADING (return code 8).
    Solution tried:
    1.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
    ERROR 2:
    Later we found that the released job was missing for failed local chain.
    Solution tried:
    1.     We created a new job by copying a previous job.
    ERROR 3:
    When we re-scheduled the process chain, we got the error message as shown below.
    Solution tried:
    1.     Deleted all the logs which were in running status.
    ERROR 4:
    After re scheduling the process chain we are getting the error message as shown below. This is the error message we are getting now.
    Solutions Tried:
    1.    Saving the variant and reactivating the process chains.
    2.     Replicating Data Sources and activating the transfer and communication structures by running the programs RS_COMSTRU_ACTIVATE_ALL and RS_TRANSTRU_ACTIVATE_ALL.
    3.     Changing the scheduling options of the failed local chain to ‘Start using Meta Chain or API’ from ‘Direct Scheduling’.
    4.     We searched for locked entries in SM12. There are no locked entries.
    5.     We ran attribute change run with variant for info object ‘Profit Center’ from the following path
        RSA1-> Tools-> Apply Hierarchy/ Attribute Change Run. We created a new variant for the info object.
    We still could not find a solution. do let us know if you have any inputs.
    Thanks,
    Mayuri

    Hi All,
    Please reply ASAP. Its critical.
    We created a new process chain and when we do a check on it,we are getting a warning message.
    We just upgraded our Dev box from 3.5 to 7.0. Our master data process chains, which reflect samples delivered by SAP, are giving warnings saying "too many parallel processes" for chosen server. It refers us to note 621400.
    I am curious to know if others have run into this, and if they have changed their MD process chains to run in a serial fashion.
    Prior to the upgrade, we had no deadlocks with process chains.
    Thanks.

Maybe you are looking for