Urgent: Protect in Trasport Request
HI,
Wat is the purpose of <b>Protect</b> functionality for <b>transport requests</b>. In transaction SE10 if we select a modifiable request and right click on it <b>Protect</b> option is available. If we select that option a lock symbol is appearing for the request
Suitable answers will be rewarded
Regards,
Kasi S
If you want only the owner of a request to be able to add more users, then you can protect the request.
This is the use of <b>protect</b> functionality.
Similar Messages
-
Urgent : Error while trasporting request
i am geeting the error while transporting request from BW Dev to BW Qty syatem.
Following are the error detail
===========================================================
Start of the after-import method for object type R3TR RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for IOBJ L, date and time: 20070917120337
Post-import methods of change/transport request BD1K903464 completed
Start of subsequent processing ... 20070917120216
End of subsequent processing... 20070917120337
===========================================================
request include following contents :
Short Desc Prog ID Obj Type Obj Name
InfoObject R3TR IOBJ 0MATERIAL
InfoObject R3TR IOBJ V_SC
Communication structure R3TR ISCS 0MATERIAL_ATTR
Transfer Rules R3TR ISMP 0MATERIAL_ATTR RD1CLNT220
InfoSource transaction data R3TR ISTD 0MATERIAL_ATTR
Transfer structure R3TR ISTS 0MATERIAL_ATTR_BC
BW Formula R3TR RSFO 17VOVUOEPA9DZNOSSG15WOPSA
BW Formula R3TR RSFO 1HIBHYFARNK05QL9ZFVBHNQT3
BW Formula R3TR RSFO 39AKHJUYHFFSSWNROCHUA93C5
BW Formula R3TR RSFO 44CT5HYIJ70EUFM6UH9UDEE7Y
BW Formula R3TR RSFO EG5DZEWF108ZJT57L646B6Q3Q
Update rules R3TR UPDR 4O47QPRE5KLOXCG2QOQ13E8KF
Pl. reply as soon as possible
Regards
CharuDear
Following is error detail for transport the request
====================
Errors occurred during post-handling RS_AFTER_IMPORT for IOBJ L
Message no. PU133
Diagnosis
During the upgrade, import post-processing RS_AFTER_IMPORT was performed for object IOBJ L. Errors were reported.
System response
The upgrade is interrupted.
Procedure
You will find the error messages for post-processing RS_AFTER_IMPORT directly before this message. First read these error messages and the respective long texts. You will find further information there on correcting the errors.
If this information is not sufficient, look for error notes in the SAPNet - R/3 Front End. Keywords you can use for the search are
the name of post-processing RS_AFTER_IMPORT or
the message numbers of the preceding error messages. The message number appears in the header of the long text display.
If you enter a problem message for the error, enter the following information:
the name of post-processing RS_AFTER_IMPORT
the message numbers of the preceding error messages
the components in which the error occurred
=================
Regards
Charu -
Trasport request target system
hi all .
Is there any possibility to know the target system of trasport request ? .
I am able to get the detail through table E070 and E071 .
but it showing only one target system .
But request trasferred to more than one system .
i.e to say quality and production .
I can see the detail via t.code se09 it is showing both systems .
but not getting in database table E070-tarsystem .
plz help me , its urgent .
thanks in advace ..Hi,
Well, as it's urgent.
The transport landscape is defined in transaction STMS, then click on Transport Routes.
Regards,
Nick -
Creation of Trasport request for the Deletion of Infoset from Dev
Hi
i want to create a trasport request for the deletion of infosets from dev system and want to trasport request in to production.
i wish to know while right clicking the info set and selecting deletion will it prompt for trasport request.
could any one help me out for this issue.
Thanks
SandyHi
I suggest you to transport the Infoarea under which the Infoset query is deleted
This will adjust all your changes including any deletion or any new changes
Assign points if useful
Thanks
N Ganesh -
I have Adobe Reader XI and I tried to open a document download and a box appeared stating it was a password protected document ant requested a password. Were and how do I one?
Hi noswam123,
If a PDF file is password protected, the only way to open that document is with the password. You will have to get that password from the person who created the PDF.
Best,
Sara -
Hi,
I have my report changes in a trasport, which I cannot move to Test system. How can I create a new transport req for the same report and move it to test system. Is there any way I can cancel/delete the old trasport request.
Thank you,
Veni.You can delete the old request by going to Se10 Transaction.
Goto SE10 Transaction -> select your request -> drop down-> delete the objects -> delete sub request -> delete main request.
Now goto your program -> change what ever you want -> click on save button -> now it will ask request # .
Careful while deleting ,use proper order
Thanks
Seshu -
Urgent Correction: Release transport request (transport is red)
Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
ThomHi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty -
Trasport Request ---Problem Vurgent
Hi ALL
I have traspported some requests to the Testing environment can i call back the request or can i cancel the trasport resquest that was released..
help me on this
Thanks in Advance
KAAk,
Thats true , we cant revert back released request but yes
You can reset the original system of the objects
specify the package to which you want to assign the objects if the relocation involved a package change
specify the transport layer to which you want to assign the objects if the relocation involved a complete package
You can make the changes, for that use T.code SE03 ->Cancel relocation transport.
Thanks
Ramu -
Creating a new trasport request
Hi,
When we are making changes to a program/report when to
create a new request and when should we save in the same
request?
Does it make any difference?
Thanks,
KaavyaHi Kaavya,
when you create an object for the first time then you would be asked for a request, but when you save after making some changes to the object it would not ask you for a request until and unless you've released the request that you used earlier.
If you are going to make some changes after releasing the earlier request and then if you try to save it then it would definitely ask you for another request number and at that point there is no other way than creating a new one.
<b>Reward points if this helps,</b>
Kiran -
URGENT - Error 400--Bad Request
When I run weblogic 6.0 default console I get "Error 400--Bad Request> From RFC
2068 Hypertext Transfer Protocol -- HTTP/1.1:"What does this mean ? Can u help
me to fix it !! Other than reinstall the whole WebLogic!!!
Another things is do you have and recommendation web site, eBook that teach "Using
Weblogic EJB with JBuider 6". Thank YouThe solution was to switch to Apache's HttpClient. no more problems with SUN's HttpUrlConnection!
-
Hi,
We had developed custom Authz/RoleMapper Providers for WLS 8.1
which worked fine .
Now we are trying to use the same providers for protecting Web/J2EE resources
is Weblogic Portal . But Doesnt seems to work .
Does WLS security framework works fine in WLP also ?
PLEASE if Somebody could help in this regard it will be appreciated.
Regards
KKHi,
Please find some of the useful links below.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0518321-5506-2c10-2ea8-d6f9d03c539a
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
http://www.cogentibs.com/pdf/cogsap08/ESS.pdf
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/38/e8584c2a664547b60442646bee23b6/content.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/43/4c5acccd0c3162e10000000a11466f/content.htm
MSS:
SAP Notes 952693 and 972322
thanks
Rishi Abrol -
Hello
I use 9300 v.6.0.0.723 (v6 bundle 3106) with ID and Protect services to backup my data and lock my device while not in use. Since yesterday after a password change and using it successfully a few times I try unsuccesfully to enter my device using the same passwd untill all the data was wiped out. I tryed to enter the Protect to restor the data but my answer for sequrity question was incorrect by some reason. Now both my accounts ID and Protect are bloced and I have no idea how to retrive my data back and the is ALL my contacts and calendar and etc!!!
If there some one from RIM development team is reading my post PLEASE contact me if u can assist me so I will answer all the nessesery questions about what I have there to match the data and to free my account
Please assist me and/or advice me what to do
Thanks and best regardsTry visit BlackBerry Protect site.
https://blackberryid.blackberry.com/bbid/login/?callbackuri=aHR0cHM6Ly9wcm90ZWN0LmJsYWNrYmVycnkuY29t...
Try forgot password.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution" -
Trasport Request Number Table Name
hi
I want TABLE NAME of where the Transport Request Numbers are stored or write.
psraoHi
Check the below tables
E070 Change & Transport System: Header of Reque
E070A Change & Transport System: Attributes of a
E070C CTS: Source/Target Client of Requests/Task
E070CREATE Change & Transport System: Creation Date o
E070DEP Change & Transport System: Dependencies of
E070L CTS: Index for Assigning Numbers to Reques
E070M CTS: Target Package/Layer for Requests
E070TAG Tagged Requests for Check-In of Non-ABAP O
E070TC Help Table for E070 for Client-Specific Im
E070USE Use of Current Requests by Users
E071 Change & Transport System: Object Entries
E071C Change & Transport System: Client-Specific
E071E Lang. Transport: Positive List for Generic
E071K Change & Transport System: Key Entries of
E071KF Change & Transport System: Nametab Info. o
E071KFINI Change & Transport System: Nametab Info. o
E071S System-Specific Import Status of Objects
E07T Change & Transport System: Short Texts for
Regards,
Boobalan S
Edited by: Boobalan Suburaj on Aug 12, 2008 7:45 AM -
Automatically adding objects to Trasport Request
Hi All,
I want to add few objects (DDIC domains, to be specific) to an exisiting transport request. I want to add this through a program. Please let us know how I can do the same.
Please let me know what FM's or Report programs available to do this.
Thanks in advance.
Regards,
SurendraI want to add few objects (DDIC domains, to be specific) to an exisiting transport request.
I want to add this through a program. Please let us know how I can do the same.
I don't understand why you want a program to add a few objects.
Simply add them to the task
R3TR DOMA <domainname>
R3TR DTEL <data element>
R3TR TABL <table definition>
R3TR PROG <abap program including docu, screens etc>
Writing a program to perform this takes much longer then just enter them manually. -
How to Create trasport Request's for Smartform Style?
Hi All,
Can you plz tell me how can i create a transport request fro Style?in which transaction code should i do that? the style name which is mentioned in my DEV is YEHPP_IES.plz let me how i can do this?
Thank you very much for your Response.Transports are created for Smartform Styles by creating or changing the style in transaction Smartforms.
If you want to transport a style without making changes then you can:
1. Go to Transaction SE10
2. Create a new workbench request
3. Double click on the new task created to get into the object list
4. Add an entry for the style. Program ID = R3TR, Object Type = SSST, object name = <smartstyle name>.
5. Ensure you lock the entry in the transport request
Regards,
Chris
Maybe you are looking for
-
I have 2 displays connected to my G5. Is it possible through networking to access one of the displays on a different computer? I have 2 computers and three displays. At times I would like to have 2 displays on a computer. Do I have to constantly conn
-
Hi there I'm sorry to hear that your payment was not applied to your account. I can help you with that! Can you please send me a private message by Clicking Here and include the following information? Full name Cell number Best time to reach you Than
-
I updated my ipad2 to ios7 after that , iam facing problems with my sim, it showing no sim card after inserting sim. there is no prbolem with my sim.
-
When trying to use one program it opens an other
Just installed Office 2011 was previously on 2004. I am still using Entourage for a verity of reasons. I have just installed 2011 (using all other applications) and now when I click the Entourage icon in the Dock (or direct on the application icon),
-
Messed up mouseover - Arrghh!
So I had my 7 page site all working nicely and I had to go mess it up! I think this may be simple to resolve but after a few hours of trial and error I'm coming for help. In DW 5.5, I violated a cardinal rule of setup - always declare your default i