Urgent qty issue more

hi expert
my issue is as.vendor sent goods 3900, in GR they have done for4000 in plant(a)
this plant deliver the goods to plant(b)4000 and billing qty is also 4000.my issue is i wants to take back qty100 back and .how to reverse is qty plz suggest
urgent
points will be awarded

hi expert i wants to add on thing plant(b)actually receipt3900
qty.how to match difference

Similar Messages

Issue more than Planned in Production Order

Hi All,
I have a problem with 2007B SP00 PL11 for Issue for Production.
In 2005B, I can issue the BOM Components more than planned. But in 2007B version, I am unable to issue more than planned. When I right-click at Production Order to Issue Component or at Issue for Production and copy from Production order. no items are displayed.
I have already issued in full at the 1st issue. Then subsequently, i need to issue some more qty for certain components. But i am unable to do that.
Has this feature of issue more been changed in 2007B?
What other method can be adopted without changing the planned qty?
Please advise.
Regards
Jessie

Hi guys,
Thanks for the fast response.
Duplicate the previous issue to create the over-issue is not a good solution. It is very troublesome. itis not a good procedure to ask customers to do this step.
Changing of the planned qty will mean that i am not able to trace my initial plan and have to go back to the BOM. again, this is not logical. especially when the queries are using figures directly from production order tables.
Since it can be done in 2005 version, why is SAP taking it out this feature in 2007?

Open order qty,Delivered qty,issued qty, and closing stock---Tables

Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopal

Hi,
Try EKPO & EKBE tables..
Thx
Raju

Issuing more then one item in free goods

Hi SD gurus,
My client is asking to issue more then two items as free goods along the main item. Example material A is sold along with material B and C as free goods.As far as my trails, I'm able to configure only one item as free goods but not the second one. Can any one suggest to configure the above scenario?

Hi Ravi krishna,
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. if you want to give free goods X & Y for material A, then you need to enter material Y in order, simply change the item category as TANN.
As of my knowledge there is no alternative to it.
these are the constraints for free goods:
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
regards
Sunil

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

How to issue more PRT qty than mention in routing

Dear Guru,
while confirmation of production order how we post PRT qty more than mentioned in routing. suppose i have consumed one PRT 2 times then how it should taken in account without changeing qty in production order.
pls guide me.
Regards,
Ishwar

Hi,
But there is no provision to put more qty than mention in co11n i.e. confirmation of productiojn order. so i think this config will not help. if possible then pls tell me how this config will help me.
Thanks,
Regards,
Ishwar

Issue qty is more tahn reservation qty

Reservation has been created for 100 Nos.
While doing Goods issue with ref to reservation. system is allowing to Post more than 100 Nos (That is more than reserved quanties)
How to keep a check in this

Hi,
Go to OMCQ and convert message 'M7 362' to 'E' to error. I think this will solve your problem
Regards,
Vikas Mayekar

Qty with more than 3 decimal places in BOM

HI ALL,
CAN I PUT QTY IN BOM WITH MORE THAN 3 DECIMAL PLACES ITS VERY URGENT REQUIREMENT.
THANKS
R SEHGAL

Dear Rakesh
I am not sure, but you can try this
1. Define one more UOM for example 4dec then in MM02 give the conversion of 4dec to your 3 decimal, give conversion in it. for eg 10*3dec = 4 dec
2. Now when you define bom enter quantity in 3dec(i,e, multiplying by 10) and then convert the uom in BOM to 4dec
You can try and let us know your feedback
Regards
Jitesh

Very urgent Decimal issue in ADF page

Hello friends,
i have an issue in ADF page which was weight field, issue has below.
1) weight filed was validated that without entering 5 digit value in filed, example suppose i enter 12345 in weight it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but it is let me to go next field and submit button. it is happening only in create page only.
2)but when i go to detail page , same weight fild is populated there - i enter invalid weight something 12345, it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but here let me not go to another filed until i ENTER valid value.
create page weight filed need to work same as detail page.i am new to ADF development, how to check where this validation done and how to fix this.
very very urgent.
Thanks,
vamshi.

If you use ADF BC, open the entity and choose "Business Rules". You can then add validation rules such as range limits under the attributes. It is usually best practice to include validation rules in the entity (model layer), this way they apply automatically to all view objects based on the entity and you are guaranteed to have only valid values in the database. (View layer validation may have its place as a convenience supplement.)
Read more about business rules in the developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm

Purchase order qty issue

Hi SAP SD GURUS,
this is STO process, Doucment type is UB, delivery type is NLCC, Item catagory is NLC.
When ever to create the delivery enter the qty more than the purchase order qty, system is allow to create the delivery, in this case i want restirct the delivery levle and we cannot enter the delivery qty more than the Purchaswe qty in delivery level, where it is controlled?
Thnaks and Regards,
Murali krishna

Dear Sd experts , @ Lakshmipathi G sir
I have one doubt on this plz Tray to solve this .. i know this is not possible in sap stranded To achieve this But some links some Mentors said It will be possible In OMCQ But i didnt get result in OMCQ
Link is this Delivery is happening more than STO quantity
If it is possible in sap stranded only what is the purpose of BADI LE_SHP_GOODSMOVMNT For this scenario to handle
Give me clarity sir .....waiting your valuable replay

BOM header qty change if BOM line item qty delivered more in previous deliv

Dear team
BOM is as follows:
Finished product
      Material1   100 Units
      Material2   100 Units
Lets say i create a sales order with 2 units of finished products
then my sales order will look like:
Finished Product 2 units
      Material1   100 Units
      Material2   100 Units
Now i am trying to create a delivery for 1 unit of finished product
Finished Product 1 units
      Material1   150 Units
      Material2   100 Units
Here i change the Material1 quantity from 100 to 150 Units and create delivery.
Now i am creating a second delivery
In the delivery order i am getting as:
Finished Product 0.5 Units
     Material1   50 Units
     materail2 50 Units
But i want
Finished Product 1 units (as my finished product open quantity is 1M3)
    Material1   50 Units
    material2 100 units
Can this be achieved. Because of more despatch of BOM line items my header BOM item should not change. It should be same as my open quantity in delivery.

Hi,
It depends upon how u are maintaining the BOM. The components calculated is based on the BOM base qty.
Regards,
V. Suresh

Problem in CRM_ORDER_MAINTAIN for updating qty in more than 1 line item .

Hi abapers,
I am using BAPI CRM_ORDER_MAINTAIN to update quantity. Its updating the quantity properly if there is single line item for a transaction .If more than 1 line item is there then its throwing an exception* "Document is being distributed - changes are not possible"*.
Scenario:
I have a itab which is having 2 line items for a transaction. i run a loop pass the pass the required parameters in CRM_ORDER_MAINTAIN ,do CRM_ORDER_SAVE , BAPI_TRANSACTION_COMMIT for the 1st line item. When i run the 2nd loop, in CRM_ORDER_MAINTAIN it gives an exception saying NO_CHANGE_ALLOWED for the same transactions 2nd line item. leaving the quantity unchanged for both the line items. What may be the problem?
Note: We cannot say how many line items are there for an transaction. so no chance of grouping all items at a time and saving at a time.
Regards,
Navin

Hi Navin,
Why its not possible to use CRM_ORDER_SAVE only once. I think its possible. Call CRM_ORDER_MAINTAIN in loop for all the line item in transaction and after that call CRM_ORDER_SAVE once. Pls follow the below sample code.
loop at it_item.
call CRM_ORDER_MAINTAIN. (Here append data for all the line items and miantin the transaction).
emdloop.
After endloop call CRM_ORDER_SAVE. Also you can add some wait after CRM_ORDER_SAVE, In order to avoid locking issue.
PLs let me know where you are trying to use CRM_ORDER_MAINATIAN ? In any BADI or Z program ?
Regards,
Amol.

(Urgent) Sysdate issue in Oracle applications scheduler.

Hi All
I have used the query 'SELECT SYSDATE FROM DUAL' for a parameter in concurrent request. If I execute this concurrent as a single request, then it returns exact sysdate (current date) in a parameter.
If i schedule this program for daily execution using scheduler, then the sysdate is always giving value of the date when i have configured the scheduler.
For example,
My Requirement :The scheduler configured such a way that it should run everyday.Whenever it runs my query has to return the current date.
Current Issue: I schedule the scheduler on 23-Dec-2008. If it runs on 24-DEC-2008,it returns as '23-DEC-2008', If it runs on 28-DEC-2008 also,it returns as '23-DEC-2008.However If I execute this as a single request, it works fine.
Can anyone help me please,,It is very urgent.
Thanks in Advance

Hi,
I can confirm that this does work properly on 11.1.0.6 . Here is the code I used
-- create a table for output
create table job_output (log_date timestamp with time zone,
        output varchar2(4000));
begin
dbms_scheduler.create_job (
    job_name => 'myjob',job_type => 'plsql_block',
    job_action =>
'insert into job_output values(systimestamp, ''myjob runs'');',
    repeat_interval=>'freq=minutely',
    number_of_arguments => 0, enabled => true);
end;
exec dbms_lock.sleep(130);
select * from job_output order by log_date ;The table job_output clearly shows dates increasing by one minute every run. If you use "freq=daily" instead then the job will run once a day instead of once a minute.
Does this example work for you ? If not could you post output from the job_output table and tell us what version database you are using.
Thanks,
Ravi.

How to revert stock in quality stock after qty issued with movemt type 704

Hi Experts,
User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov 101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
Awaiting for your expert reply.
Thanks and Regards,
Sandy

hi Sandy,
Quickest and easiest option without lot of configuration and process change for your scneario will be ,
The transaction code is MB0A.
The steps for executing the above trancode is as follows.
Inputs:-
Posting date : UD date.
Movement type : 102
Enter relevant plant, storage location, vendor and the material code
The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
Select the correct PO and click adopt selected.
The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
Click adopt + details
Enter storage location
Remove "X" in the stocktype field
Save.
Material document will be generated.
The correct material could be inwarded again and correct usage decision can be taken against this lot.
Get approval from Materials and Finance guys.   As long as your accounting documents nurlifies each other , you should be good to go.
If not you have to use the same proess   witht twiests , with other movement types for which you have activated inspection type.
Hope this helps
Cheers
Rav

URGENT: Mail Issues

All,
I have the following issues in the Coldfusion Server. In the
mail log I'm seeing the following issues logged. Where all the
emails are valid emails. I just made them xxxx, yyyy inorder to
protect their identity.
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 554 <[email protected]>:
Recipient address rejected: Relay access denied
Mar 29, 2007 9:36 AM Error 0
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 554 <[email protected]>:
Recipient address rejected: Relay access denied
Mar 28, 2007 8:18 PM Error 0
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 554 <[email protected]>:
Recipient address rejected: Relay access denied
Mar 28, 2007 8:02 PM Error 0
Invalid Addresses; nested exception is: class
javax.mail.SendFailedException: 554 <[email protected]>:
Recipient address rejected: Relay access denied
And many more such entries. Any idea what is going
wrong???

Relay Access Denied is a security restriction that is set by
the SMTP server. On the SMTP server you restrict relaying by IP,
domain, subnet etc... Try and contact your SMTP Server
Administrator to ensure that 'relaying' is allowed for the machine
that CF is on or try a different mail server.

Urgent qty issue more

Similar Messages

Maybe you are looking for