Urgent Question about System Center Server Names and Dashes

Hey guys I have a quick Urgent question that would be awesome if it happens to get answered quickly :).
So in the past we had problems with different server names in components of System Center when setting up different servers.... I never myself saw the errors or what it did, but an absentee colleague did. For example is anything wrong with a name setup like
xx-scom-01 / xx-scom-02 as compared to the standard scom01 scom02? We have a certain naming convention we are moving to and I wanted to see if this was fixed. I wanted to say it had something to do with the hyphens... anyways any foresight anyone can
provide would be awesome. Thanks!

Dashes in the name will work fine.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Similar Messages

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

How to get Server Name and port. Urgent.....

Hi,
Please let me know how can i get the server name and port without using request object.
I am getting it :- request.getServerName();
But, pl. let me know how can I get it without using this request object.
Waiting for reply..

I don't know of any way to trivially access that, but why do you need to do this? If you need access to that information in a method that can't see your HttpServletRequest, then perhaps your architecture has a flaw, and you'll be better off in the long run restructuring it.

Reconfig Server Name and IP Address

I've installed Solaris 2.4 on a Sun Ultra. I'm required to re-set this up, but I am trying to avoide full installation from scratch. Is it possible to re-set up the parameters that was entered when I first installed it??
I need to actually change the Server Name and IP address of the machine, and not the network card, as well as root password and other configs entered during installation.
Thanks

Hi,
I am not sure whether this command is there in 2.4. If it is there, you may try running /usr/sbin/sys-unconfig. This does all what you are looking for. It will reboot the system, ask all the questions e.g hostname, ip address, root password, domainname etc. And will again reboot.
Please read man page of sys-unconfig before executing.
Thanks
Kalpesh

Two questions about SG300 DHCP server

Hi,
I have two questions about the DHCP server on the SG300:
On the Address Binding page, what does the "Declined" state mean? I have a NAS device that won't pull an address, and I think that the entry with a state of "Declined" corresponds to this device. It was previously pulling an address from a RV180, so the only difference is that it is now connected to the SG300. I worked around this by manually setting the address on the NAS device, but this won't scale if I run into a lot of other devices that can't pull an address.
I configured a static address binding for a WAP321 and found that instead of pulling the configured address that it pulled a dynamic address. I checked the Address Binding page and see that the dynamic entry that corresponds with the WAP321 has a Client Identifier rather than a MAC address. I changed the static entry for the WAP321 to use the client identifier displayed in the dynamic entry, and now the WAP321 pulls the configured static address. Is this expected behavior?
Thanks,
Bob

With the SX300/500 it is required the client identifier, it doesn't automatically insert it. If static DHCP is made on the switch and you didn't need client identifier, that is more or less fortunate behavior for you
So to answer this question, the expected behavior is to configure client identifier for static DHCP entry.
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

Lumira Login Error "Check the Server Name and Instance ID"

Dear Experts
I installed Lumira Desktop and was able to connect to the
HANA Server.
Later while I was working the software hanged and I had to
shut it down.
Now, after re-opening the software I receive error "Check the Server Name and Instance ID"
(though the server credentials are same as error and correct”
Any suggests on how to rectify

I wonder if one of the following KBAs may give you a clue?
1995325 - Error HDB 11009: The dataset could not be published to SAP Lumira Server because publishing to the SAP HANA layer failed. Lumira Server
2134259 - Lumira LaunchPad Logon Hangs
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

Question about the chain step name in DEFINE_CHAIN_STEP

I have questions about the chain step name in DEFINE_CHAIN_STEP:
1. Can the step name be a number (e.g. "8")?
2. Should the step name be unique within a chain or across all chains?
I am having this exception:
ORA-25448: rule DMUSER.RULE_6_3707 has errors
ORA-22806: not an object or REF
After I changed the step names (in DEFINE_CHAIN_STEP), the chain seems to run fine.
Thanks,
Denny

The reason I asked about the step name is to confirm it can handle numbers (it looks it can handle it from the doc).
Why I changed the step names say from "11" to "21", the error goes away, that puzzled me. Because the way I defined steps and the rules for the steps were exactly the same. Just changing the step names made the error goes away?!
Thanks.

Server Name and Client Name

Hi Experts,
Need a Function Module which can give me the current Server Name and Client name .
Please help me out.
Thanks
Chandan

Hi,
Check out :
1. "FIND_DB_APPLICATION_SERVER" gives the server name via the export parameter "SERVERNAME" .
2. "TH_GET_ACTIVE_SERVER" gives the server name via the export parameter "SERVER" .
3. "RFC_GET_LOCAL_SERVERS" will give a list containing some info about servers, then you can use the FM "TH_USER_INFO" to get user's host address from the exporting parameter "HOSTADDR". Then you can look-up the list you retrieved by the first FM where the first four characters at the field "HOSTADR" is the same with the user's. The server name is contained at the field "NAME" of the same row.
4. sy-sysid might also be usefull
5. Try this too:
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD ev_server_name.
where ev_server_name is function module export parameter of type BTCTGTSRVR-SRVNAME.
Hope it helps
Best Regards
Sumana

Get Application Server Name and Version

Hello All,
Is it possible to get the Application Server Name and Version using Java?
To simplify my question, if I am running Weblogic, the jsp page should tell me that I am running Weblogic Version <number> or IBM WebSphere Version <number>.
Thanks

I get an error when I put this line in my jsp page:
out.println(" Server Info: " +getServletContext().getServerInfo());
Is there something I am missing?
symbol : method getServletContext ()
location: class jsp_servlet._jsp._mu.__showmxversion
out.println(" Server Info: " +getServletContext().getServerInfo()); //[ /jsp/mu/showMXVersion.jsp; Line: 16]

Scan to Email Error Message "cannot connect to server. check server name and address"

I have a HP Officejet Pro 8600 Plus.
I've been using this printer for several months. Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address"
I'm not sure how to check this. We can all still print remotely via the internet connection.
Anyone have any ideas?

Thanks for the info.,
Did you recently change your operating system or network router that started to cause this error?
Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
Thanks

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
It should show, John Doe
underneath, work/home/mobile
For example:
http://shawnblanc.net/images/img-0009-1.png

How to get server name and port of OSB server in a proxy service ?

I need to get the server name and port of the OSB server inside a proxy service. How can I get this?

You may use java callout for this purpose -
How to get ServerName and ApplicationName in OSB (ALSB) ?
Regards,
Anuj

When Hard-coded server name and data base name are replaced with variables , execute process task does not produce the result

Hi All,
I am trying to load shape file into a sql spatial table. A execution process task is used to run the ogr2ogr.exe program.
This is how the process tab looks like .
Executable : C:\gdal_ogr2ogr\bin\gdal\apps\ogr2ogr.exe
Argument : -f MSSQLSpatial   MSSQL:server=SQL-ABC-DEV;database=MYSIMPLE_Dev;Trusted_Connection=True;\\mypath\files\shares\Data\www.mypage.htm\my_sample_file.shp
Success value : 1
For above settings, package runs fine. The spatial table is created in SQL server db. However when hard-coded SQL server name and database name are replaced with global variables , the spatial table is not created in the database. Yet the package runs fine.
It does not throw any errors. (I am using another variable for full file path. It is not causing any errors though)
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
Both variables are string type. Can anyone tell me what I am doing wrong here please?
I am running this in VS 2012.
Thanks for your help in advance..
shamen

There should be a single space just after True:
before
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
after keeping the space
" -f MSSQLSpatial   MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True; "+ @[User::Filepath] + "\\my_sample_file.shp"
Thanks
shamen

Application server name and port number

Hi
Is it possible to get the application server name(ip) and port number at runtime. Becuase i want to open an html file which is in the application server, when a button is pressed by using web.show_document ();
Can anyone guide me please.
Thanks in advance
geethu

application server name and port number

Urgent Question about System Center Server Names and Dashes

Similar Messages

Maybe you are looking for