Urgent question about two monitors for Sun Ultra 40 M2

Hello,
I feel extremely unhappy to ask you the following.
I bought recently a Sun Utra 40 M2. I thought that with NVIDA Quadro FX1500 one could have two monitors as there are two DVI-D 's to connect with two monitors.
But today I heard from SUN support that Sun does not support two monitors under SUN Solaris 10. It is possible with Linux on this SUN Ultra 40, but not with Solaris, so it was told to me.
But: is this true? I still can not believe it.
with friendly greetings,

Hello,
I see, with Windows it is possible just lik that and with Solaris one needs two cards.
Well, it seems for a one man"s business customer like me: end of story.
I still can not believe it that Sun would arrange this.
I will wait and see.
with friendly greetings,
P_ter

Similar Messages

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
John

You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

Wireless PCI for Sun Ultra 24?

Hi
I'm trying to find a wireless PCI card with appropriate drivers for Sun Ultra 24 with Solaris 10 8/07.
Can anyone recommend cards that have been validated with this machine / OS combination?
Help appreciated
Lance

Hello Lance,
have you reviewed the following page ?
Solaris Ready WIFI Products
http://www.sun.com/io_technologies/wifi/WiFi0.html
Michael
Edited by: MAAL on 27.06.2008 07:10
Adding a link didn't work as expected ...

Upgrade for Sun Ultra 60 without DVD?

20 January 2012
Greetings,
I have a Sun Ultra 60 (SUNW, UltraSPARC-II, 64-bit) currently running Solaris 9. The Ultra 60 was listed on the HCL for the Solaris 11 Express release last year, so I assumed it would run Solaris 11. But having downloaded Solaris 11 11/11 and burned it to CD, I get the error message:
Error: 'SUNW, UltraSPARC-II' is not supported by this release of Solaris. Program terminated.
Problem #1: The Solaris 11 Express release, which might work, is no longer available. Problem #2: The Solaris 10 8/11 release, which should certainly work, is available only on DVD or as an .iso image to be burned to DVD. (Too large for a CD, I presume.) The machine has neither a DVD reader nor burner, and obtaining one looks like a budget buster, even assuming I could find a driver for it for Solaris 9. So: Is there a way to get a version of Solaris 11 which will run on the Ultra 60, or a version of Solaris 10 on multiple CD's, or some other work-around? It is an odd situation that Oracle has a product which I wish to buy, but cannot find a form in which to sell it to me.
Thanks in advance for your assistance.
Sincerely,
Ian H. Redmount

23 January 2012
Dear Mr. Magnus,
Thank you for your reply. No, Live Upgrade does not address my problem:
1) I do not have the Live Update software on this machine. Where would I get it?
2) Live Upgrade still requires a source from which to update the mirror image of the boot environment it produces. The Oracle White Paper on the subject mentions the Solaris 10 DVD. If I could read the DVD, or if I had another source of Solaris 10, I would have no problem to begin with.
We have to break out of the circular reasoning here. So the question remains: Where or how do I get a non-DVD form of the Solaris 10 operating system?
Thanks again for your assistance.
Sincerely,
Ian H. Redmount

Upgrade for Sun Ultra 60 without DVD--Act II?

29 January 2012
As I previously marked the original version of this question as Answered, let me return to it in a new thread. I have a Sun Ultra 60 Workstation running Solaris 9, and I wish to upgrade it to Solaris 10 (8/11 version). It will not take Solaris 11. But Solaris 10 only comes as a 2GB .iso image suitable for DVD, not CD. This machine has no DVD burner or reader.
User abrante (Magnus) suggested using lofiadd -a to interpret the .iso file as a logical device, mount the logical device on the system, then use Live Upgrade to create a Solaris 10 boot environment from the image. This all works, except for the last step. I can mount the .iso image as an ordinary file system, and browse through it in the usual way. I was able to load the Live Upgrade software via pkgadd. I was even able to run the Installer executable on the image, direct from the command line. This installed the Live Upgrade software again, but would not install anything else. And the kicker--the Live Upgrade software would not recognize the interpreted image as a Boot Environment. For that matter, it would not recognize the original boot environment on the system as a boot environment. For example:
unknown# lucurr
ERROR: No boot environments are configured on this system
ERROR: cannot determine boot environment name for mount point </>
unknown# lustatus
ERROR: No boot environments are configured on this system
ERROR: cannot determine list of all boot environment names
This is rather odd, as the system does boot to a working Solaris 9 system. Trying to use the .iso image--mounted on /mnt--as a source for lucreate gets
ERROR: source bot environment </mnt> does not exist.
ERROR: cannot create new boot environment using options provided.
OK, so what's the missing trick? How do I get the Live Upgrade software to recognize boot environments, and in particular how do I get it to recognize the .iso image interpreted by lofi?
Many thanks for your further assistance.
Sincerely,
Ian H. Redmount

Hello, Ian.
I am a happy owner of the old decent Ultra 10, the junior sibling of your Ultra 60. I faced the same problem with Solaris 11 11/11 Error: 'SUNW, UltraSPARC-IIi' is not supported by this release of Solaris. And I have a couple of solutions for you.
1. Buy a DVD drive :). I confirm that at least Solaris 10 update 7 installs from DVD and then runs on Ultra 10 flawlessly (I didnt' try current update 10). The only trick is: discard regular Ultra's 40-wire IDE cable, replace it with modern 80-wire one.
2. Download Solaris 11 Express (2010/11). I confirm it installs and runs on Ultra 10 flawlessly. Yes, it is n/a on the Oracle web site, but still easily available in torrent networks. Search for "Solaris 11 Express 2010.11", and you will find many torrents. You need "sol-11-exp-201011-text-sparc.iso" (452M) CD image. I believe that downloading Solaris 11 Express is legal.
One more thing - sometimes installer forgets to write a boot block on boot disk, and you may need to run installboot manually after installation.
Regards,
Konstantin Andreev.

Question about dual-monitor setup - advanced dock + PCIe card

I just got a Z60t at work. I had been using a dual monitor setup, but it doesn't look like my current config is going to fly w/ the new machine. Anyway, here's what I've got:
Primary monitor: Acer AL2416W (1920x1200 DVI)
Secondary monitor: Dell 1901FP (1280x1024 VGA)
I've read that the advanced dock might be able to let me use this setup with the Z60t if i put a PCIe video card in it. So here are my questions:
1. Will the advanced dock + PCIe video card allow me to run the two monitors listed above (I don't use the laptop screen at all)?
2. Which PCIe cards are compatible with the advanced dock?
3. Can I achieve the same resolutions with the advanced dock + PCIe card?
4. Will I need to split the VGA output, or can i use VGA + DVI like I do now (since the Z60t has no native DVI support)?
thanks!

Gary -- don't turn on the OS Display Mirroring. Turn it off.
You want Aperture to control how it uses your dual monitors. (You do not want the OS to determine it.)
Once you've turned off the OS "Display Mirroring", the set-up I specified above should give you what you want.
That set-up is:
"View → Main Viewer → {anything}", and
"View → Secondary Viewer → Alternate"
You must have the Viewer active (not the Browser) in order to change the "Secondary Viewer" setting. If you are in the Browser, activate the Viewer by double-clicking an Image.
Let me know if that doesn't work.

Question about firefox permissions for sites

i have a question about sites permissions
in google chrom it is easy to set permission for each site like (java, flash plugin, image , ...)
http://i58.tinypic.com/nl66v9.png
but i prefer to use firefox
is there any addon or something else to have this options in firefox ?

You can inspect and manage the permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions

Urgent Question about System Center Server Names and Dashes

Hey guys I have a quick Urgent question that would be awesome if it happens to get answered quickly :).
So in the past we had problems with different server names in components of System Center when setting up different servers.... I never myself saw the errors or what it did, but an absentee colleague did. For example is anything wrong with a name setup like
xx-scom-01 / xx-scom-02 as compared to the standard scom01 scom02? We have a certain naming convention we are moving to and I wanted to see if this was fixed. I wanted to say it had something to do with the hyphens... anyways any foresight anyone can
provide would be awesome. Thanks!

Dashes in the name will work fine.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

URGENT: Question about User_Exit

Hello All,
I have a question about user_exit. Does it share the same transaction context as the calling form??
If it does, how to implement the same thing in Java.
Any help or material available somewhere?
TIA
Naveen

Naveen
Actually what we are doing is converting Oracle Forms code into java code and i cannot open and change the code that is being called by the User_Exit built-in.
So i want to know is how i can still keep the same functionality, without changing the Pro*C code into java, or some other native code.Since what you have in hand is an user exit I dont think you can use it straight away from Java Forms unless you do not have any Form specific things.
In User exits we can do thigns like getting and putting values from/to oracle forms items and there are also provision to pass error and other related information between the forms and user exits.
this is actually accomplished by having some internal API's ( these are invoked by the user_exit builtin in Forms) in Oracle Forms. And this is predefined and there is nothing much to know how this functionality works. And Oracle itself does not support User exits( if there is any interaction with Form) in Oracle Web Forms. And user exit has many Oracle specific libraries linked to it during compilation.
Knowing this you should first know whether your user exit is Oracle Forms Dependent. If it is I think you dont have much options than rewriting your user exit.
On the other hand if it does not , then I think you can easily get rid of the error and other handling information( if present in the user exit )and recompile it as a standalone Pro*C executable and the call it natively since it is noting but a C program in the compiled state.
OK but regarding the connection you have to go back to Java and ask whether there is way to pass a conection context to a native C program( dont mention Proc or Oracle Forms here)
So start finding whether your exit is Oracle Forms dependent. If not you can take it easy except for the connection thing which I am not . But if it is dependent then I think u have to start rewriting.
Good Luck
Vij

Donwloading right OS for Sun Ultra 40 M2

Please help I will appreciate your help, I am trying to download the OS Solaris on the web for a Sun Ultra 40 M2 workstation machine. Please some one guide me the steps by step or path to download it. My problem I don't understand what to select the Sparks or 64/32. On the manual it says it is a x64 but when I type the uname -X command I get Machine = i86pc, Release =5.10, Generic_118855-33. I am wondering if this machine was installed right way.

x64:
x = x86-based processor which = i86pc Machine
64=64-bit OS
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/Ultra40_M2/Ultra40_M2
http://www.sun.com/software/solaris/get.jsp
http://www.sun.com/software/solaris/self_help.jsp
http://www.sun.com/software/solaris/download_instruction.xml

Urgent - Question about logging and debugging.

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

Hi,
I have a question about the logging and debugging supported by
Weblogic 6.0. From what I understood by reading the documentation
it has classes e.g. NotCatalogLogger class for logging the information.
The class has one method callded
debug() for writing the debugging information. I want to log the
debug messages only in some situation. Can I control this using
some property? Because the documentation says that the debug information
is logged only if application is running in debug mode. Now how
do I change the mode of an application??
Thanks and Reagrds,
Manoj

HT3702 Hi I would like to ask a question about my billing for some things

I would like to ask a question about my billing

This is not Apple. These are user forums. Questions about billing, credit cards, etc. should be addressed directly to Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us

Quick (and urgent) Question about Intel G5's

Just a quick question about the new intel G5's.
I currently have bunch of software for my PPC G5 which is a Dual 2ghz. Software includes Adobe CS2, Macromedia Studio, Quark 6, etc, etc.
If I purchase the new intel mac, would I be able to use the same software? or would I be forced to purchase a whole new set of everything I currently have?
If the software will work on the intel G5, would it perform at the same rate/better than how it performs now on my PPC g5?
Thanks in advance for any help.

Rosetta:
Most of the time you get a real 'hit' when a program first opens that is PPC. Very sluggish. They will require and use more memory than otherwise, too.
Tests from last August aren't as helpful, there have been improvements, letting the Mac Pro pull even further ahead.
http://www.barefeats.com/quad06.html
Comparison Mac Models shows scores of all models. So there is 2x as much or more processing power, bandwidth, better video, as well as disk drives. A 'base' configuration would be 4-6GB RAM.
And there are differences, more than between G4 and G5.
People with experience would be Mac Pro Discussions
Don't use Migration Assistant, and upgrade to CS3 etc. reinstall all your applications fresh.
There are some drivers and plug-ins, that can be problems, and known.
Mac Pro 2GHz 4GB 10K Raptor RAID Cinema HD Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

Urgent question about two monitors for Sun Ultra 40 M2

Similar Messages

Maybe you are looking for