Urgent question empty rows NonEmpty calculation

Hi all,
The query below works in cube A. I'm aligning my current repots with my new cube which is exactly the same but with some different namings.
WITH
MEMBER [Measures].[ParameterCaption] AS
[Product].[Product].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Product].[Product].CURRENTMEMBER.UNIQUENAME MEMBER
[Measures].[ParameterLevel] AS
[Product].[Product].CURRENTMEMBER.LEVEL.ORDINAL
SELECT
[Measures].[ParameterCaption],
[Measures].[ParameterValue],
[Measures].[ParameterLevel]
} ON COLUMNS,
NonEmpty(
[Product].[Product].ALLMEMBERS,
NonEmpty(
[Draw].[Draw calendar - Week].[Draw date],
{[Measures].[Sales amount - vouchers]}
ON ROWS
FROM
[New Cube]
The query above works for my old cube and also works in my new cube if I take the nonempty separatly. That is if I take nonempty(products, sales) or nonempty(draw date, sales). When I combine both like above it gives me no results.
Anyone has an idea what might cause this?
Thanks!

When I browse the cube it works, so I assume it must be the mdw query although i didnt change anything..

Similar Messages

Mdx : Sum up the measure from start but need only non empty rows

Hi All
i have created a calculated measure where it suming up all its previous avaialable values based on Date dimension.
Everything is working but we are getting all rows from that datetimension . how can get only till current date,
SUM(NULL:[Date].[Hierarchy].currentmember,[Measures].[SIMID])
Surendra Thota

Hi Surendra,
According to your description, you want to calculate the sum up the measure from start for those non empty rows, right?
In this case, please try the query below.
WITH MEMBER [Measures].[Sum from start]
AS
SUM ({NULL:[Date].[Calendar].CurrentMember},
[Measures].[Internet Sales Amount])
SELECT {[Measures].[Internet Sales Amount],[Measures].[Sum from start]} ON 0 ,
nonempty([Date].[Calendar].[Calendar Year].MEMBERS) ON 1
FROM [Adventure Works]
Result
Besides, here is a blog which describe various way to calculate running total, please see:
http://blog.sqltechie.com/2011/01/various-way-to-calculate-running-total.html
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

How can I create an empty row on a #TempTable based on an input parameter

So if my Line of Business is 'MC' or 'MG', I have to go over to Oracle and get its data accordingly. Then, when I create my final report result set, I think I'll want to UNION in that result set if my Parameter is 'MC' or 'MG'. I don't think I can UNION
based on the value of the Parameter. So my thought process was to create an empty row on my #TempTable so when I UNION and my parameter is NOT 'MC' or 'MG' then it will have nothing to UNION in. My struggle is how do I create an empty row in my #TempTable
if my parameter is NOT 'MC' or 'MG'
If I am wwwaaayyy off here, please tell me so.
This is my #TempTable Creation SQL...
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
SELECT *
INTO [#TempTable_Market_Prominence_Member_Data]
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
If I add an ELSE, it always comes back and tells me the #TempTable_Market_Prominence_Member_Data already exists. As if it's creating it regardless of the Top IF.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
The error came back from your ELSE Statement most probably caused by the reason mentioned in Hoffmann's post.
Regarding your requirement, I would suggest you CREATE the [#TempTable_Market_Prominence_Member_Data] explicitly.
CREATE TABLE [#TempTable_Market_Prominence_Member_Data]
NAME_ID INT,
MEMBER_ID INT,
HIC_NUMBER VARCHAR(99),
NAME_FIRST VARCHAR(99),
NAME_LAST VARCHAR(99),
START_DATE DATE,
END_DATE DATE,
COUNTY_CODE VARCHAR(99),
PART_A_PAYMENT MONEY,
PART_B_PAYMENT MONEY,
STATUS VARCHAR(99),
ORG_ID INT,
PALN VARCHAR(99),
ENROLL_DATE VARCHAR(99),
PBP_ID INT,
VALUE INT
IF EXISTS
(SELECT 1
FROM [#TempTable_LineOfBusiness_Parameter]
WHERE [#TempTable_LineOfBusiness_Parameter].[RESULT] IN ('MC','MG'))
BEGIN
INSERT INTO [#TempTable_Market_Prominence_Member_Data]
SELECT *
FROM OPENQUERY
(RPDMHF,
'SELECT HCFA_NAME_ORG.NAME_ID,
HCFA_NAME_ORG.MEMBER_ID,
HCFA_NAME_ORG.HIC_NUMBER,
MEMBER.NAME_FIRST,
MEMBER.NAME_LAST,
HCFA_DATE.START_DATE,
HCFA_DATE.END_DATE,
HCFA_NAME_ORG.COUNTY_CODE,
HCFA_NAME_ORG.PART_A_PAYMENT,
HCFA_NAME_ORG.PART_B_PAYMENT,
HCFA_NAME_ORG.STATUS,
HCFA_NAME_ORG.ORG_ID,
HCFA_NAME_ORG.PLAN,
HCFA_NAME_ORG.ENROLL_DATE,
HCFA_NAME_ORG.PBP_ID,
HCFA_DATE.VALUE
FROM SC_BASE.HCFA_DATE
LEFT JOIN SC_BASE.HCFA_NAME_ORG
ON HCFA_NAME_ORG.NAME_ID = HCFA_DATE.NAME_ID
LEFT JOIN AMIOWN.MEMBER
ON TRIM(MEMBER.MEMBER_NBR) = TRIM(HCFA_NAME_ORG.MEMBER_ID)
WHERE HCFA_DATE.INDICATOR = ''plan''
AND HCFA_DATE.START_DATE >= ''2015-01-01''
END
Explicitly creating the temp table will offer below benefit in this case.
The ELSE statement is no longer needed, if the no rows get inserted into that table, it has nothing to union an empty table.
With the column datatype defined, you can avoid such conversion error
SELECT NULL AS COL1,NULL AS COL2 INTO #T
SELECT COL1,COL2 FROM #T
UNION
SELECT 1,'ABC'--Conversion failed when converting the varchar value 'ABC' to data type int.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to add empty rows in table in smart form

how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]

You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick

How to avoid displaying empty rows in a table?

The situation is as follows:
I have got a set of questions under a particular category say marketing category.
The user will be displayed with a table consisting of a set of questions from a particular category with four radio buttons for each question.
Now once he is done with all the set of questions under a particular category, he will be navigated to the next set of questions under some other category say 'xyz'
Now instead of creating seperate view objects for each category, we have created a view object which will hold all the set of questions from all the category but will display only the set of questions under a particular category by declaring a variable in the backing bean and setting the question rendering to the value in the variable. the value to the variable will be changed once the user is done with answering all the set of questions under a particular category.
Now the problem that i am facing is:
Because of the rendering condition that i have used, it displays only those rows that have the rendering condition set to the variable in the backing and displays all other empty rows overlapped.
How do i avoid this situation ??

Seems odd, but you could use COALESCE to achieve this.
ME_XE?create table all_nullz (col1 number, col2 number, col3 number);
Table created.
Elapsed: 00:00:00.20
ME_XE?
ME_XE?insert into all_nullz values (1,2,3);
1 row created.
Elapsed: 00:00:00.12
ME_XE?insert into all_nullz values (null, null, null);
1 row created.
Elapsed: 00:00:00.06
ME_XE?
ME_XE?delete from all_nullz where coalesce(col1,col2,col3) is null;
1 row deleted.
Elapsed: 00:00:00.26
ME_XE?

Calculate accurate datagrid height with variableRowHeight and without any empty row

hi ,
how can i calculate accurate datagrid height with variableRowHeight="true" and without getting any empty row.
Currently i am calculating datagrid height on updateComplete event of datagrid as follows:
public function onUpdateComplete() : void
this.datagrid.headerHeight=50;
datagrid.height= datagrid.measureHeightOfItems(0, this.datagrid.dataprovider.length)+this.datagrid.headerHeight;
with following datagrid properties:
<mx:DataGrid
dataProvider="{dataArrayCollection}" width="100%" rowCount="{dataArrayCollection.length}"
id="datagrid" updateComplete="onUpdateComplete()" paddingLeft="0" paddingRight="0" paddingTop="0" paddingBottom="0"
fontSize="12" wordWrap="true" variableRowHeight="true" verticalScrollPolicy="off" >
With this approach the issue is, i am getting scrollbar on datagrid's container. I want scrollbar for datagrid instead of its container so that i can have only rows to be scrollable and not the header. Also, if i set verticalScrollPolicy of datagrid as "auto", i get empty rows.
So,is there any way to have datagrid with following properties:
variable row height
no empty rows
word wrap for headers as well as for rows
Scrollbar for grid i.e. header should remain fix ,only rows should be scrollable
no horizontal scrollbar
TIA

http://blogs.adobe.com/aharui/2010/10/mx-datagrid-list-and-variablerowheight
.html

Suppressing empty rows

Hi everyone!!
In my Excel Report I have 6 columns. Some of the rows are empty but in these empty rows one column "Goods Recepient" is represented by a #. I would like to supress the entire row. How could I do that? I need to submit this report urgently, so hope to get an immediate reply.
Thanks.

Select a key figure and create a condtion where Key Figure not equal to 0 so that query will retrieve the data which is having key figure value not equal to 0.
Regs
Gopi
Assign points if it helps ...
Message was edited by: Gopi

How to delete empty row without validation error in ADF Table(EMP)

Hi Everyone,
I am using EMP Table in ADF jspx page to insert the data into database.when i insert a row into table by createInsert operation,it inserting the row.But I need to delete that row immediately with out entering any value.
But it showing some validation error at empno.Is there any ways to delete the empty row?if not,what are the reasons that we can't delete the row.
could any one tell me the reasons!!
Thanks in advance!!
With Best Regards,
Amar
Edited by: 973755 on Dec 11, 2012 6:42 AM

Amar,
I am little confused with your logic here.....
but if you are trying to remove the row by clicking Remove button, you can set the immediate property to true and that remove function will run without executing any entity validation.......
-R

How to insert an empty row on a matrix with multiple loaded lines?

Hi.
I want to insert an empty row on my form's matrix. Currently I am using the <b>AddRow </b>method, as it is:
// C# - it's mandatory to give parameters to the method (=
oMatrix.AddRow(1,1)
But, when the matrix already has some rows (at least 1), the method <b>AddRow </b>inserts the new line as a copy of above line, then, I have to manually clear all cells.
Any idea on this?
Thanks in advance.

If you matrix is bound to a dbDatasource you can insert a record in the dbdataspurce instead of using matrix.AddRow... If not only way to do it is by clearing the row after add

How can I leave an empty row?

Hi,
If I want to use GridBagLayout, how can I leave an empty row? Or empty column? When I create the buttons on a frame, are they created sequentially? so Is that mean I can't put something back to the first row later in the program? Thx.
Adrian

I'm just guessing, since I havent done Java for a long time... but if you want an empty row... what pops up in my mind first is like putting in an empty JLabel/Label... for that row... but then if you wanna fill it in... i dunno...

Query against materialized view from stored procedure brings back empty row

I have a stored procedure that runs a query against a materialized view. When I run the query outside the SP it works just fine. When I change the MV to a table name, the SP works. When I change it back to the MV i get an empty row. Any ideas? The code is below:
PROCEDURE getAuth     (p_naid        IN NUMBER,
                         p_scope       IN VARCHAR2,
                         o_xml_data    OUT SYS_REFCURSOR
                         ) IS
BEGIN
    IF p_scope = 'Approved' THEN
      OPEN o_xml_data FOR
        SELECT naid,
               p_naid,
               auth_type,
               xml_data
        FROM some_mv
        WHERE naid = p_naid;
      RETURN;
      CLOSE o_xml_data;
... the rest of the procedure ...

does procedure contain EXCEPTION handler?
if so, then remove, delete & eliminate EXCEPTION handler (at least during testing & debugging)

Urgent question:can you replace source video and automatically have AE swap clips in timeline?

Hi there
Have an urgent question. I have finished editing a project that has been edited from pre-exported videos, but the problem is that i have been notified last minute if it is possible to change parts of it!
Is is possible to change and re-render the pre-exported clips at same length that are affected and then replace the 'source footage' in after effects to have it automatically swap the clips that I've edited and cut up already? As it would take a very messy and extremely long time to manually change all the trimmed parts!
It is only a small section of the source clip I need to change, but the overall composition edits are fine so I don't really need to touch that, it's just really to replace the footage but have everything to stay the exact same.
Please advise!
Appreciate this if anyone can! fairly urgent
Thanks

Yes, just right-click on a source in the Project bin and choose Replace Footage.

SSRS- Hide Empty Rows

Hi,
I am having a difficult time deleting empty rows in a table. I used HideDuplicates under properties to hide any of the duplicated data but now it is leaving me an empty row in the table. I tried to use the following codes but none of them seemed to work:
=Iif(Previous(Fields!Apps.Value) = Fields!Apps.Value, True, False)
=IIF(fields!Apps.value IS NOTHING, True, False)
=isnothing(fields!Apps.value)
=if(Fields!Apps.Value = "",
true, false).
=IIF(IsNothing(Fields!Apps.Value),True,False)
=iif(Fields!Apps.IsMissing,True,False)
Might anyone know another code I might use to delete the empty rows?
Thank you in advance!

What you are looking for is probably the Visibility option not the HideDuplicates. You can right click on the row and choose
Row Visibility. Select "Show or hide based on an expression" and put in the expression that resolves to true to hide the row, and false to show it.
The HideDuplicates field that you are using is there to hide duplicating text and not entire rows. For example if you have:
Value1
5
Value1
15
Value1
20
Value2
10
You would then get:
Value1
5
15
20
Value2
10
I hope that helped.
Regards,
Andrew.

Appending empty rows in internal table

Hi,
i am using table control, where there is a condition, some row may left empty. end if i press enter button the empty row is filled by the next available record. My need is to pick the records in the table control to the internal table including the empty rows as it is.

Hi Karthikeyan,
By default with user pressinng enter, empty rows will get deleted.
How are you populating your table control? Is it from standard transaction or your internal table?
If it is from your internal table, you can add anothe flag field for empty row.
Whenever row is empty in your internal table, mark flag field as 'X', so in the table control you these entries will not get vanished with pressing of enter.
This is one idea and you can build on this. You can make this flag column as non editable so that no one can change these.
hope this helps,
ags.

Button to delete all empty rows

I am in the process of creating an interactive form that has a button that add rows for the user to input issues and another button to add follow-ups to those instances. There are 3 different sets of these. However, we do not want to add a delete button to all rows, to allow for accidental deletion of already inputted data. I would like to create a button that will delete all empty rows, including all subforms. Either that, or upon saving the document, all empty rows would be deleted - whichever would be easier. Please help! This seems like it will be a complicated task and I am not that well versed in LiveCycle to be able to figure this out on my own.
Thank you!

There is no doubt that looping through nested repeating objects is more complex:
Here is the script for the first table with follow-up rows:
// Technical
var nCount3 = VitalsSubform.Technical._Instance1.count;
for (var k=0; k<nCount3; k++)
     // this is script to remove the follow-up rows in the first table only
     var nCount6 = xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.count;
     // loop through the rows in the follow-up table
     for (var i=0; i<nCount6; i++)
          if (xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "].Table1.Row1[" + i + "]").Cell4.rawValue == null)
               // remove null row
               xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.removeInstance(i);
               // recount nCount in case a row has been deleted
               nCount6 =xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1._Row1.count;
               // account for the row that is now deleted
               i = i-1;
     // now remove null statements
     if (xfa.resolveNode("VitalsSubform.Technical.Instance1[" + k + "]").Table1.Statement.Statement.rawValue == null)
          VitalsSubform.Technical._Instance1.removeInstance(k);
          var nCount3 = VitalsSubform.Technical._Instance1.count;
          k = k-1;
It is by no means tested and could still be flaky.
Have you considered a manual 'x'/delete button for the follow-up rows?
Here is the form: https://acrobat.com/#d=JMGUKXNQ*qMD18S3W5VxSQ
Niall

Urgent question empty rows NonEmpty calculation

Similar Messages

Maybe you are looking for