URGENT: Re-installing CS 5.5 after CS 6 installed

How do I reinstall CS 5.5 after already having CS 6 installed on my computer, without losing the data I worked with through CS 6? I bought the Master Collection for CS 5.5 three years ago, but I lost it this year due to a hard drive crash. This year, I installed the trial version of CS 6, but it expired recently.
I tried downloading CS 5.5 again through this link (Other downloads) but an error saying 'image not recognized' pops up when I try to install it on my computer. Image is attached.
I have already received this reply (Re: URGENT: Re-installing CS 5.5 after having CS 6 on computer) so it would be helpful if you could address my specific installation issue with CS5.5
I have tried chatting with a sales person, and they have re-directed me to this forum, so please do not re-direct me to a chat. I would also not want to spend extra money to upgrade to CS 6.

Download again using a different browser... nobody here (or at Adobe, since that is an OLD product) is going to be able to help with a corrupted download
When you do get a good download... write the file(s) and a text file with your serial number to backup!!!

Similar Messages

Several times a month, when I go to open Firefox, it says "wait installing new updates". After they are installed, Firefox won't open, it says "page not found." I have to then reload Firefox. How can I stop these updates?

Before Firefox open the little window opens saying"wait installing new updates." Then after when opening Firefox, my home page says "can't find this page. I have plugged in the address: http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official and it Firefox still won't open. I have to run the Firefox setup 3.6.3 on my desktop, to get Firefox to open on my home page. I would like to stop these automatic Updates from running; how?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Installing new iphone stops after 20% of installing process

I tried to install a new iphone 4s, right out of the box. Buyed a separate phone and a buyed a new sim only card. After activiting the sim card by the provider, putting the in the sim card, unlocking the phone, the installing started. We choose to set back a a back up of a new ipad4. After an half hour the progress status bar of the installing didn't move any more. Waiting a night long did not show any progress any more. What to do now?

Got a tip from friend: pushing the sleep - and home knop at the time for a seconds. System resets and is ready to go.

[fixed] Re-installing on an SSD after failing to install correctly.

Okay this is really confusing I never had an issue with installing the "default" shall we call it of Arch. Here is what commands I used.
sgdisk --zap-all /dev/sda
cgdisk /dev/sda give the boot drive code EF02
30g [boot sda1]
5g ish [set type to 82 swap]
rest of disk [sda3]
mkfs.ext4 /dev/sda1
mkfs.ext4 /dev/sda3
mkswap /dev/sda2
swapon /dev/sda2
mount /dev/sda1 /mnt
mkdir /mnt/home
mount /dev/sda3 /mnt/home
iw dev - [Lists device]
Wifi-menu (device name)
ip link show
ping -c 3 www.google.co.uk
pacstrap -i /mnt base base-devel
genfstab -U -p /mnt : sed 's/rw,realtime,data=ordered/defaults,realtime/' >> /mnt/etc/fstab
arch-chroot /mnt
nano /etc/locale.gen [select your language]
locale-gen
echo LANG=en_GB.UTF-8 > /etc/locale.conf
export LANG=en_GB.UTF-8
in -s /usr/share/zonetime/England
mkinitcpio -p linux
passwd
useradd -m -g users -G wheel -s /bin/bash USERNAME
pacman -S grub-bios
pacman -S os-prober
grub-install /dev/sda
grub-mkconfig -o /boot/grub/grub.cfg
But when I try to execute
grub-mkconfig -o /boot/grub/grub.cfg
I get unable to execute.
Have I missed something critical in this setup? I know it's not the best but I usually do the rest in the GUI.
Any responses would be great.
Last edited by Arch-Hoochie (2014-10-11 09:47:29)

Huh thanks for the info. Sorry but I wasn't doing to bump my post. My search says the firmware (stupid auto correcting phones) is to do with aur is that correct?
I'm really lost on this one seems it just doesn't want to boot of my ssd.
thiagowfx wrote:
jasonwryan wrote:Also, locale=gen is not going to do anything...
In other words, use locale-gen.
Usually I don't simply use a grub-install /dev/sda, but https://wiki.archlinux.org/index.php/Gr … ll_to_disk . You should also read the output of this command, it may contain something relevant.
Thanks for the correct. I will check out the link.
UPDATE: After 7 reinstalls I tried Syslinux instead of grub and it worked first time.
Last edited by Arch-Hoochie (2014-10-11 09:47:07)

Can i install 'extra audio content' after i have installed the main program?

hello all!
i need to install the 'extra audio content' that comes with Logic, as i didnt include them when installing in the first place.
how do i go about doing this?
i mainly need all the different presents and chanel strips, not so bothered about the loops.
would appreciate any help.
many thanks

That's what usually happens - you download and install Logic first and the additional content is downloaded from within the application (under the Logic Pro menu at the top left). Unless you have a blazing internet connection, you're probably better to download one set at a time - you can delete stuff that you don't want, if necessary or move loops to another drive etc..unfortunately the setup programs don't allow for installation directly to another drive.

Can I install LR4 on MAC after I already installed it on 2 different PCs?

I have installed LR4 on my laptop and desktop, both PCs. If I purchase a MAC in the near future can I install the version of LR4 I already have on it without purchasing another license? If not, do I have to physically purchase another copy of LR4 since I would have used up my 2 allotted uses? Or is there a way to purchase an additional license online without buying another physical copy? And if bought online, would the additional license(s) be the same amount?

If you need to run Lightroom on all 3 computers on a continuous basis then you'll need another license.
1 license = 2 activations (2 x PC)
2 licenses = 4 activations (2 x PC plus 1 x Mac and one free activation for use on another computer)
Same price for each extra license.

Printing Problems after Reader 10 install

Recently deployed Reader 10 to about 300 workstations using Group Policy. Several machines are no longer able to print to some of the network printers. These printers are HP printers using the Universal Print Driver. When trying to print we get an error and the Adobe Reader application crashes. It will however print to other network printers that are using an older device specific driver, printing to the same print device. Have downloaded the latest HP driver, but it has not helped the situation. The printing worked fine with Reader 8 and Reader 9.   Anyone with an Idea?

Sorry only know Windows: Edit (menu)>Preferences>General>Application Startup>Enable Protected Mode at startup.
Wayne Capra
Date: Wed, 26 Oct 2011 10:37:59 -0600
From: [email protected]
To: [email protected]
Subject: Printing Problems after Reader 10 install
    Re: Printing Problems after Reader 10 install
    created by Al1iOop in Adobe Reader - View the full discussion
I am using a Mac 10.6 and cannot find the "Enable protected mode at startup" in General or any other options. Does anyone have an answer for Macs? Thanks.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3991540#3991540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3991540#3991540. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

URGENT: I lost the Lion Partition after repairing the Windows 7 partition

URGENT: I lost the Lion Partition after repairing the Windows 7 partition
I have recent bought a new Macbook Pro and then I start doing all the necessary setup. This is the first time I do such setup with bootcamp myself anyway.
1st: normal MacOS setup, the Lion version has been setup perfectly.
2nd: run the bootcamp and setup the Windows 7, done perfectly as well.
3rd: try to partition and resize the harddrive with the Lion installed and create 2 new FAT partitions (now 4 partitions in total: 1 for Lion, Journaled, 1 for Windows 7 in NTFS, 2 for file sharing purposes in FAT). See if I can have better partitioning to do necessary organisations.
4th: When I want to restart in Windows to see if the newly created 2 FAT partitions can be read in Windows environment and can function norally, the Windows setup does not show at the start up page when I hold the "Option" key during the startup. I then try to restart again, still no such partition but boot directly to Lion.
5th: I tried to repair the Windows 7 with the start up disc and then it worked. I can also see the 2 newly partitioned FAT drive work normally.
6th: When I want to restart in Lion, I cannot boot the Lion OS and I cannot find the start up icon on the startup page even with me holding the "Option" Key.
7th: "MacOS Installation Utility" appears. I tried to repair but cannot as I have neither the Lion setup disc with me (coz the Lion has been pre-installed) nor a time machine backup/ any other backup image to load from.
8th: Tried to "erase and install a new copy of Lion", the partition where the Lion has been previously installed cannot be shown, now indicate itself as "freespace" and not able to be selected for my "erase and reinstall" process.
9th: so I go to 2 other FAT drives to do as the instructions to try "erase" and hope the "reinstall" process can be started. But the Disk Utility ends up saying the drive cannot be dismounted/ cannot verfy...
At the end of the many tries, I tried to shut the computer down and restart again, hopefully something will work still.... the startup page now shows a disk image with ?, I guess NO OPERATION system/ drive detected for booting. So I got a piece of metals without any use now...
Anybody help? Thanks alot!!

In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
and Boot Camp: Install or repair Boot Camp drivers.
The other option is to use
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
How to Reset NVRAM on your Mac - Apple Support

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
I tried downloading it for a second time, but this did'nt solve the problem.
Befor the CC version I used a one year student version of Adobe CS6.
What can I do?

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

Apple Store Refuses to Diagnose Hardware Issue after Boot Camp Installed

I previously reported an issue in the Boot Camp Beta forum, but figured I share this with other MBP users as well. After loading the updated firmware, running boot camp to partion my drive, I installed Windows XP Professional. During the install, the screen would go dark, and come back at irregular intervals, as if there was a video sync problem of something. I managed to get XP installed, and booted it and loaded the updated drives from the Boot Camp driver CD which I had earlier created. Subsequent attempt to use the XP installation result in a constantly blank screen, with only occational glitches, as if there is some activity coming out of the GPU, but it's not working correctly.
This is what led me to take my machine to my local (15 miles away) Apple Retail Store (Washington Sqaure, Tigard, Oregon), and attempt to show the problem to a "genius". HOWEVER... As soon as I mentioned "Boot Camp" and XP, they went into the whole "public beta, blah, blah, blah", "not supported", etc. I tried to explain that I was not reporting a SOFTWARE issue with Boot Camp, but rather a HARDWARE ISSUE which is exposed on my machine only after using BOOT CAMP to partition the hard drive, and then installing Windows XP. All I get was "Well, it works fine in OSX, and Boot Camp is Public Beta, so there's nothing we're going to do". Obviously, I'm livid. And, will pursuing any and all avenues to bring this problem to Apple Management attention. First it was Mark Pienpakdee the "genius" who tried to help me, and then I was further rebuked by Mark Macsurak, Assistant Manager. So, I'm left with broken hardware which won't work correctly running Windows, and no recourse until Boot Camp isn't "Public Beta". What a load of crap. I was so mad, I didn't even bother buying the extra AC adapter I was planning on picking up. ARGHHHHHHHHHHH!!!!!!!!!!!!!!!
I was absolutly shocked that the "genius" didn't react with anything like "wow, what an interesting problem, let's see if we can diagnose it". He didn't even want to see me boot XP to show the problem, only wanted to see that OSX was working normally and send me on my way.
If you have had similar problem at the Washington Square store in Oregon, be sure to let them know by sending e-mail to [email protected], I know I will...
Eric

If you are going to send an e-mail you should send it to [email protected] However, nobody from Apple is going to send you a response. The Software is Beta which means it is not ready for Prime Time (Also that means that the drivers are beta too). Plus they say before you decide to install any of this in their write ups that they do not and will not provide any support for BootCamp and/or Windows. So they are right not to do anything if the computer works like it is supposed to under OS 10.4.6. Now they might take a look at somethings when OS 10.5 comes out if it has BootCamp in it. They may have something similiar in it, or it might be a perfected BootCamp. However, I doubt that they will ever provide any support for Windows. There has been some talk that Microsoft is looking into supporting Windows on the MAC. However, as far as I have heard no decision on that has come out as of yet.

Mid-2010 27" iMac very slow, even after clean OS install - HELP!

Good afternoon guys, I'm hoping someone can offer me some advice.
I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
Thanks in advance,
Col

Just suggesting things right off the bat here-
To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
Or try running Apple Hardware Test a few times back to see if it is a hardware error.
As for the iLife apps they should've come on one of the install discs that shipped with your mac.
If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
See here:Computers that can be upgraded to use OS X Internet Recovery
Good Luck!

Itunes wont open after trying to install 11.1.4??

iTunes will not open after trying to install 11.1.4 version ??

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

I am totally worried I am going ot lose all my data after trying to install update on MacAir. Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

Hi Guys
No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
Sorry I don't have an immedaite solution.

After a clean install, how can I continue using Time Machine?

After a clean install, how can I continue using Time Machine?
I booted from my recovery partition, erased my HD, installed the same OS, (Lion, 10.7.5) then restored from my TM.
If it asks if i want to use TM, I say yes. When I chose the drive, it seems to want to start all over, instead of just picking up where I left off.
Is there any way of picking up where I left off?

Hi Frank,
You are sure you looking in your Library in /Users/YOUR_USERNAME/Library and not /Library at the top level of your harddrive?
When you open iCal what do you see? Are the calendars the two default Home and Work ones?
I really appreciate the responses -- especially if you are in the UK as opposed to Ontario.
Why, do you have something against London Ontario?
John M

How can i gain access to my data on a Time Capsule after a fresh install of Mavericks? I can't access any backups through Time Machine... They appear purple/transparent, and I can't even select them to view their contents. PLEASE HELP!!!

So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometime, and haven't been able to figure out how to get my files back. Please Help!!! My daughter is 2 and a half, and every picture/video I have of her is locked on this thing. I was planning on making some photo/video projects fo my wife for Christmas, and now I'm definitely not going to be able to pull it off. Her birthday is at the end of January, though, so if I could have it by then, that would rule!
Basically, the bar on the right of the screen has some gray dates, which I can access (all backups after the Mavericks install), and purple dates that go all the way back to March (when I originally purchased and began using the TC) which deny me access/viewing. It's possible that I created a slightly different user name when I reset my MacBook, which I guess is most likely the cause, but I have no idea what to do now to correct it. Thanks for taking the time!

Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.

URGENT: Re-installing CS 5.5 after CS 6 installed

Similar Messages

Maybe you are looking for