Urgent:Regarding data reconsilation
HI all,
1. i have PSFT as trusted source and EBS as target source. now when we connect to this sources by using out-of-the-box connectors which is already avilable,what it will ask while installing connectors and which tables it is going to connect?
2.i have a requirement that i need get the data related to users from diff tables of PSFT and need to provision that data in diff tables of EBS,wether we need to fulfill this by using predefind connectors or we need to use custom connetors?
if possible please give me the steps for the above queries.
please help me out in this
thanks for your time
Regards
siva
PSFT needs profile to be set at PSFT for the data and EBS has queries in the properties file with the connector. Installation does not in itself does anything but you will have to configure the connectors post installation as per your requirement. My suggestion would be to go through the connector docs to understand the architecture and feasibility.
HTH,
BB
Similar Messages
-
Urgent regarding Data & Task Audits Back Up
Hi Experts
Here my question is regarding Data Audit and Task audits in V 11.1.2.1
-->If we take the back up of Data & Task audit tables data in to other backup_tables in same schema how this can be viewed through task audit and data audit through HFM?
-->Whether any third part tools available to audit the tasks (DATA & TASK ) information...?
-->Whether EPM maestro can be used here..?
Thanks in advance
Edited by: RajaKK on May 29, 2012 6:19 PMUse the Audit Extract utility bundled with HFM 11.1.2.1 to export this information periodically to a CSV file that you can view offline through any text editor, or even Excel. There is a command line feature for this as well, so you could incorporate this into a batch routine.
For anyone attending Kaleidoscope in San Antonio, TX next month, I will present the various utilities that ship with HFM including this one. Hope to see you there!
--Chris -
hI,
IN SELECTION SCREEN DEFINED
SELECT-OPTIONS : p_budat FOR mkpf-budat.
How can I check these dates can anybody give coding part to this.
Regards
SAISRIHi
Your query is not very Clear.. Anyway if you want to check the dates that is coming in this interval Do like This......
SELECT-OPTIONS : p_budat FOR mkpf-budat.
data:begin of it_mkpf occurs 10,
budat type bkpf-budat,
end if it_mkpf.
select budat from mkpf inti it_mkpf where budat in p_budat.
Now you can check your condition in internal table..
If this is not the exact requirment get back..
Reward All Helpfull Answers............. -
URGENT: REGARDING DATE DISPLAY IN REPORT
hi,
i am making a report in which i have to display that these are the persons who had released the requsitions at these dates,i am able to display the persons who had released the requsitions but i am not able to display the dates on which they had released the requsitions.
if any body who will provide me help for this solution he or she will be defiantely rewarded...hi ric,
i also tested and it gave this o/p.
28.11.2007
PROGRAM FOR TESTING
1
PUR.REQ DATE REQ.TYPE 1ST APPROVAL 2ND APPROVAL 3RD APPROVAL
PRESON DATE PERSON DATE PERSON DATE
10009603 19.07.2005 NB A1 19.07.2005
10010046 08.03.2006 NB R1 R2 08.03.2006
10010115 27.03.2006 NB EX 27.03.2006
10010116 27.03.2006 NB EX 27.03.2006
10010827 22.05.2006 NB G1 G2 22.05.2006
i think it is right...
what else you need to display? -
URGENT: regarding data load in essbase through ODI after upgradation
Hi,
I have got this error, Please give me the solution...
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 29, in <module>
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCStatement.fetchResult(Unknown Source)
at org.hsqldb.jdbc.JDBCStatement.executeQuery(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: unexpected token: -
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Thanks,
RubiI have used some condition in data column.
If I have deleted that condition and directly mapped in data column them interface works fine.
But whenever I have used some normal CONVERT function like CONVERT("Source column name",Numeric), It gives me that error. -
Hello,
we have the phenomena that when an application is commiting a transaction and then terminating,
often not all events regarding Data Cache are dispatched by the TCP kodo.RemoteCommitProvider.
It seems that the JVM on termination is not waiting until RemoteCommitProvider has dispatched all events regarding Data
Cache. In this way we sometimes loose some cache synchronization and some of our customers run into serious problems.
Is there a way to guarantee that all Data Cache events are dispatched before the aplciation terminates
(maybe implementing a shutdown hook?).
best regards
Guenther Demetz
Wuerth-Phoenix SRLHi,
as nobody answered to my question I try to explain it more simple:
Are the TCP-kodo.RemoteCommitProvider threads acting as user threads or as threads of type 'deamon' ?
I hope that soon someon can answer
best regards
Guenther Demetz
Wuerth-Phoenix SRL
G.Demetz wrote:
Hello,
we have the phenomena that when an application is commiting a transaction and then terminating,
often not all events regarding Data Cache are dispatched by the TCP kodo.RemoteCommitProvider.
It seems that the JVM on termination is not waiting until RemoteCommitProvider has dispatched all events regarding Data
Cache. In this way we sometimes loose some cache synchronization and some of our customers run into serious problems.
Is there a way to guarantee that all Data Cache events are dispatched before the aplciation terminates
(maybe implementing a shutdown hook?).
best regards
Guenther Demetz
Wuerth-Phoenix SRL -
Urgent: Regarding Join Syntax in Oracle 9i and 10g
Dear Members
Please help me by providing me the synatx of following Join statements for Oracle 9i and 10g:
1.Inner Join
2.Left Outer Join
3.Right Outer Join
4.Self Join
5.Cross Join
6.Full Outer Join
N.B. I NEED THIS HELP URGENTLY
Regards
Praveen Kumar PandeyInner join
SELECT *
FROM a,
b
WHERE a.<<column>> = b.<<column>>Left Outer Join
SELECT *
FROM a LEFT OUTER JOIN b
ON a.<<column>> = b.<<column>>Right Outer Join
SELECT *
FROM a RIGHT OUTER JOIN b
ON a.<<column>> = b.<<column>>Full Outer Join
SELECT *
FROM a FULL OUTER JOIN b
ON a.<<column>> = b.<<column>>Self Join
SELECT *
FROM a a1,
a a2
WHERE a1.<<column>> = a2.<<column>>Cartesian Join
SELECT *
FROM a,
bJustin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
Appropritate forum to put queries regarding data archiving
Hi All,
Which one is the appropriate forum to put queries regarding data archiving?
Thanks in advance.
VithalprasadYes you can use this forum, also there is one forum for Data Transfers.
Regards,
Altaf Shaikh -
hi gurus, i have some doubt regarding dates function.
if i enter any date of present month i wand the first date of next month.
for example if i enter any date in january from 01/01/2007 to 31/01/2007 i want
first date of february. ie 01/02/2007. plz help me.
regards
vamsi.Hi
use this coding
data : d1 type sy-datum,
d2 type sy-datum,
d3 type sy-datum,
d4(8),
m(2),
y(4).
d1 = sy-datum.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = d1
IMPORTING
E_DATE = d2 .
write : d1.
skip 3.
m = d2+4(2).
y = d2+0(4).
concatenate y m '01' into d4 .
d3 = d4.
write : / d3.
write : / d2.
write / '***********2 month****************************'.
d3 = d2 + 1.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = d3
IMPORTING
E_DATE = d2 .
write :/ d3,
/ d2.
write / '**************3 month ***************************'.
d3 = d2 + 1.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = d3
IMPORTING
E_DATE = d2 .
write :/ d3,
/ d2. -
hi all,
i need some information regarding date types infotype 41.
i need to print date types in sequential manner like dar01 dar02 dar03 like upto 12 date types.
can you please suggest me how should i print them.
thanks,
madhavi.Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
with regards,
Hema SUndara. -
Hi Gurus
I have a issue regarding credit limit:
for a customer "ABC" i have maintained a credit limit for 1000/- in FD32 now when we create a sales order of more than 1000/- for the same customer a popup MSg is comming saying amount has exeeded ...so far so good
my issue is that the requirements should not pass to MD04 (Stock/Requirement List)
some of the SAP gurus giving the answer check out OVB8 and see the requirement 101, i want to know the functionality of requirement "101" and how to go about the issue ..... issue is very urgent
Regards
RajeshHI RAJESH
This can be done through go to IMG--> S&D->Basic functions>Availabililty check&transfer of requirements>Transfer of requirements-->block quantity confirmation for delivery blocks. Here u give blocking reason as credit limit,,,,,, Here u find confirmation block,here u make tick and save . Here the reason is that even the order is saved,requirements will not be passed to MRP i.e requirements will not be passed to stock requirement list.
Award points if it is helpful for u
Regards
Prasad.G -
I need some help regarding data element ZEXPDT. I used it in an infoquery that was transported to QAS and it does not exist in QAS. I thought it might be locked in a transport, but the below screen clip says it is not locked. It was created in 3/2014. Thanks.
Either trick the system, SE11, add a space at end of text desciption and save,
Or call transport workbench (SE01, SE10) create a transport request or use an existing one, then double-click on a task, switch to modify mode, add a line with R3TR DTEL name of the data element, save, then object list, lock in request/task menu.
Or SE80, contextual menu of data element. (other functions, write transport entry)
Regards,
Raymond -
I am unable to access iTunes. Receive error regarding data execution prevention. I've changed the Performance Options to exclude DEP for iTunes and I've tried unloading/reloading. Still no success. Suggestions?
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?
-
URGENT: REGARDING POSTING DATE AND DELETION OF ZEROS IN ALV REPORT
Hi,
I had made a report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as PERIOD :- _______ to _______ .
2nd problem is i had displayed the material no. ,but there are zeros which are displaying in dere ,i want to remove dem ... example, if the mat.no. is 2321 ,it is displaying 000002321. i want to remove these zeros.
Its request to all of u dat plz help me as fast as possible as it is most urgent to me and if any body provide me help he or sh e will be definately rewarded..
Regards,
ric.sHere i am giving you one of the ALV reports i have generated. Check this program. I hope it will be helpful to you.
REPORT ZFI_ASSIGNED_FUNDS_FINAL.
TABLES: FMIT,FMCIT,FPOS,IFMEISA1,FMFCTRT,BSEG,ZREV_BUDGET.
TYPE-POOLS: SLIS.
*ALV data declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
GD_SORT TYPE SLIS_T_SORTINFO_ALV WITH HEADER LINE,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
GD_REPID LIKE SY-REPID.
*For ALV top of page
DATA : IT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
*For ALV Events
DATA : IT_EVENT1 TYPE SLIS_T_EVENT.
*For ALV Events
DATA : IT_EVENT TYPE SLIS_ALV_EVENT.
*For top of page heading
DATA: IT_LINE TYPE SLIS_LISTHEADER.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : RADIO RADIOBUTTON GROUP R1.
IF RADIO EQ 'X'.
SELECT-OPTIONS: FIPEX FOR FPOS-FIPEX, " SELECTION FOR FUNDS CENTER & COMMITMENT ITEM
RFISTL FOR FMIT-RFISTL.
ENDIF.
PARAMETER: RADIO1 RADIOBUTTON GROUP R1.
IF RADIO1 EQ 'X'.
SELECT-OPTIONS : HKONT FOR BSEG-HKONT, " SELECTION FOR COST CENTER & G/L ACCOUNT
KOSTL FOR ZREV_BUDGET-KOSTL.
ENDIF.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: PERDE FOR IFMEISA1-PERDE DEFAULT '01' TO '12' OBLIGATORY.
PARAMETER : RYEAR LIKE FMIT-RYEAR OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B2.
DATA: BEGIN OF IT_TAB OCCURS 0,
FIKRS LIKE FMFCTR-FIKRS,
FICTR LIKE CSKS-KOSTL,
CTR_OBJNR LIKE FMFCTR-CTR_OBJNR,
RFISTL LIKE FMIT-RFISTL,
OBJNR LIKE BPPE-OBJNR,
END OF IT_TAB.
DATA: BEGIN OF IT_TAB1 OCCURS 0,
CO_OBJNR LIKE BPIJ-CO_OBJNR,
POSIT LIKE BPPE-POSIT,
FIPEX LIKE FMPOSIT-FIPEX,
FICTR LIKE FMFCTR-FICTR,
KSTAR LIKE COSP-KSTAR,
RFISTL LIKE FMIT-RFISTL,
OBJNR1 LIKE BPPE-OBJNR,
END OF IT_TAB1.
DATA: BEGIN OF IT_FMIT OCCURS 0,
RYEAR LIKE FMIT-RYEAR,
FIKRS LIKE FMIT-FIKRS,
RFISTL LIKE ZREV_BUDGET-KOSTL,
RFIPEX LIKE ZREV_BUDGET-KSTAR,
HSL01 LIKE FMIT-HSL01,
HSL02 LIKE FMIT-HSL02,
HSL03 LIKE FMIT-HSL03,
HSL04 LIKE FMIT-HSL04,
HSL05 LIKE FMIT-HSL05,
HSL06 LIKE FMIT-HSL06,
HSL07 LIKE FMIT-HSL07,
HSL08 LIKE FMIT-HSL08,
HSL09 LIKE FMIT-HSL09,
HSL10 LIKE FMIT-HSL10,
HSL11 LIKE FMIT-HSL11,
HSL12 LIKE FMIT-HSL12,
HSL13 LIKE FMIT-HSL13,
HSL14 LIKE FMIT-HSL14,
HSL15 LIKE FMIT-HSL15,
HSL16 LIKE FMIT-HSL16,
END OF IT_FMIT.
DATA: BEGIN OF IT_FMIT1 OCCURS 0,
RYEAR LIKE FMIT-RYEAR,
FIKRS LIKE FMIT-FIKRS,
RFISTL LIKE ZREV_BUDGET-KOSTL,
RFIPEX LIKE FMPG-FIPEX,
TOTAL LIKE FMIT-TSL01,
TOTAL1 LIKE FMIT-TSL01,
OBJNR LIKE BPPE-OBJNR,
POSIT LIKE BPPE-POSIT,
END OF IT_FMIT1.
DATA: BEGIN OF IT_BPPE OCCURS 0,
OBJNR LIKE BPPE-OBJNR,
POSIT LIKE BPPE-POSIT,
GJAHR LIKE BPPE-GJAHR,
WLP01 LIKE BPPE-WLP01,
WLP02 LIKE BPPE-WLP02,
WLP03 LIKE BPPE-WLP03,
WLP04 LIKE BPPE-WLP04,
WLP05 LIKE BPPE-WLP05,
WLP06 LIKE BPPE-WLP06,
WLP07 LIKE BPPE-WLP07,
WLP08 LIKE BPPE-WLP08,
WLP09 LIKE BPPE-WLP09,
WLP10 LIKE BPPE-WLP10,
WLP11 LIKE BPPE-WLP11,
WLP12 LIKE BPPE-WLP12,
END OF IT_BPPE.
DATA: BEGIN OF IT_BPPE1 OCCURS 0,
OBJNR LIKE BPPE-OBJNR,
POSIT LIKE BPPE-POSIT,
GJAHR LIKE BPPE-GJAHR,
RFISTL LIKE FMIT-RFISTL,
FIPEX LIKE FPOS-FIPEX,
TOTAL2 LIKE BPPE-WLP01,
END OF IT_BPPE1.
DATA: BEGIN OF IT_CSKS OCCURS 0,
KOKRS LIKE CSKS-KOKRS,
KOSTL LIKE CSKS-KOSTL,
BUKRS LIKE CSKS-BUKRS,
OBJNR LIKE CSKS-OBJNR,
END OF IT_CSKS.
DATA: BEGIN OF IT_COSP OCCURS 0,
OBJNR LIKE COSP-OBJNR,
GJAHR LIKE COSP-GJAHR,
KSTAR LIKE COSP-KSTAR,
BEKNZ LIKE COSP-BEKNZ,
WKG001 LIKE COSP-WKG001,
WKG002 LIKE COSP-WKG002,
WKG003 LIKE COSP-WKG003,
WKG004 LIKE COSP-WKG004,
WKG005 LIKE COSP-WKG005,
WKG006 LIKE COSP-WKG006,
WKG007 LIKE COSP-WKG007,
WKG008 LIKE COSP-WKG008,
WKG009 LIKE COSP-WKG009,
WKG010 LIKE COSP-WKG010,
WKG011 LIKE COSP-WKG011,
WKG012 LIKE COSP-WKG012,
END OF IT_COSP.
DATA: BEGIN OF IT_COSP2 OCCURS 0,
OBJNR LIKE COSP-OBJNR,
GJAHR LIKE COSP-GJAHR,
KSTAR LIKE COSP-KSTAR,
FIPEX LIKE FMPG-FIPEX,
TOTAL LIKE COSP-WKG001,
TOTAL1 LIKE COSP-WKG001,
OBJNR1 LIKE BPPE-OBJNR,
POSIT LIKE BPPE-POSIT,
END OF IT_COSP2.
IF RADIO EQ 'X'.
DATA: BEGIN OF IT_FINAL OCCURS 0,
FIKRS LIKE FMIT-FIKRS,
RFISTL LIKE FMIT-RFISTL,
RFIPEX LIKE FMIT-RFIPEX,
TEXT LIKE FMCIT-TEXT1,
ALLOC LIKE FMIT-TSL16,
USED LIKE FMIT-TSL16,
REMAIN LIKE FMIT-TSL16,
BEZEICH LIKE FMFCTRT-BEZEICH,
END OF IT_FINAL.
ENDIF.
IF RADIO1 EQ 'X'.
DATA: BEGIN OF IT_FINAL1 OCCURS 0,
GJAHR LIKE ZREV_BUDGET-GJAHR,
KOSTL LIKE ZREV_BUDGET-KOSTL,
KSTAR LIKE ZREV_BUDGET-KSTAR,
TOTAL1 LIKE COSP-WKG001,
TOTAL3 LIKE COSP-WKG001,
TEXT LIKE CSKU-KTEXT,
VARIANCE LIKE COSP-WKG001,
BEZEICH LIKE FMFCTRT-BEZEICH,
END OF IT_FINAL1.
ENDIF.
DATA: BEGIN OF IT_FISTL OCCURS 0,
RFISTL LIKE FMIT-RFISTL,
BEZEICH LIKE FMFCTRT-BEZEICH,
END OF IT_FISTL.
DATA: BEGIN OF IT_HKONT OCCURS 0,
KSTAR LIKE CSKU-KSTAR,
KTEXT LIKE CSKU-KTEXT,
END OF IT_HKONT.
DATA: PERIOD1 TYPE I,
PERIOD2 TYPE I,
PERIOD3 TYPE I,
PERIO TYPE I.
DATA: BEZEICH LIKE FMFCTRT-BEZEICH.
CONSTANTS: C_00 TYPE MONAT VALUE '00',
C_13 TYPE MONAT VALUE '13'.
DATA : IT_RETURN LIKE DDSHRETVAL OCCURS 0 WITH HEADER LINE.
DATA: FIPEX1 LIKE COSP-KSTAR.
A T - S E L E C T I O N S C R E E N
AT SELECTION-SCREEN.
LOOP AT PERDE.
IF PERDE-LOW >= C_13 OR PERDE-HIGH >= C_13 .
MESSAGE E022(ZA) WITH 'Enter Period values from 1 to 12'.
EXIT.
ENDIF.
ENDLOOP.
IF NOT PERDE-LOW IS INITIAL.
PERIOD1 = PERDE-LOW.
ENDIF.
IF NOT PERDE-HIGH IS INITIAL.
PERIOD2 = PERDE-HIGH.
PERIOD3 = PERIOD2 - PERIOD1.
PERIOD3 = PERIOD3 + 1.
ELSE.
PERIOD3 = 1.
ENDIF.
PERIO = PERIOD1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR RFISTL-LOW.
SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FIKRS EQ 'NFFM'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'RFISTL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_FISTL
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO RFISTL-LOW.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR RFISTL-HIGH.
SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FIKRS EQ 'NFFM'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'RFISTL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_FISTL
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO RFISTL-HIGH.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-LOW.
SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.
SORT IT_HKONT BY KSTAR.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'HKONT'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_HKONT
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO HKONT-LOW.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR HKONT-HIGH.
SELECT KSTAR KTEXT INTO TABLE IT_HKONT FROM CSKU WHERE SPRAS EQ 'EN'.
SORT IT_HKONT BY KSTAR.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'HKONT'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_HKONT
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO HKONT-HIGH.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR KOSTL-LOW.
SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FIKRS IN KOSTL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'KOSTL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_FISTL
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO KOSTL-LOW.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR KOSTL-HIGH.
SELECT FICTR BEZEICH INTO TABLE IT_FISTL FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FIKRS IN KOSTL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'KOSTL'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = IT_FISTL
RETURN_TAB = IT_RETURN.
IF SY-SUBRC = 0.
READ TABLE IT_RETURN INDEX 1.
MOVE IT_RETURN-FIELDVAL TO KOSTL-HIGH.
ENDIF.
*START-OF-SELECTION
START-OF-SELECTION.
IF RADIO EQ 'X'. " FOR FUNDS CENTER AND COMMITMENT ITEM
PERFORM GET_DATA.
PERFORM PROCESS_DATA.
ENDIF.
IF RADIO1 EQ 'X'. " FOR COST CENTER AND G/L ACCOUNT
PERFORM GET_DATA1.
PERFORM PROCESS_DATA1.
ENDIF.
*END OF SELECTION
PERFORM BUILD_LAYOUT.
PERFORM BUILD_EVENTS.
IF RADIO EQ 'X'.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_SORT.
PERFORM DISPLAY_ALV_REPORT.
ENDIF.
IF RADIO1 EQ 'X'.
PERFORM BUILD_FIELDCATALOG1.
PERFORM BUILD_SORT1.
PERFORM DISPLAY_ALV_REPORT1.
ENDIF.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT FIKRS FICTR CTR_OBJNR INTO TABLE IT_TAB FROM FMFCTR
WHERE FIKRS EQ 'NFFM'
AND FICTR IN RFISTL.
SELECT CO_OBJNR POSIT INTO TABLE IT_TAB1 FROM BPIJ
FOR ALL ENTRIES IN IT_TAB
WHERE CO_OBJNR EQ IT_TAB-CTR_OBJNR.
LOOP AT IT_TAB1.
SELECT SINGLE FIPEX INTO IT_TAB1-FIPEX FROM FMPOSIT WHERE FIKRS EQ 'NFFM'
AND POSIT EQ IT_TAB1-POSIT
AND FIPEX IN FIPEX.
IF SY-SUBRC EQ '0'.
MODIFY IT_TAB1.
ELSE.
DELETE IT_TAB1.
ENDIF.
ENDLOOP.
SELECT OBJNR
POSIT
GJAHR
WLP01
WLP02
WLP03
WLP04
WLP05
WLP06
WLP07
WLP08
WLP09
WLP10
WLP11
WLP12
INTO TABLE IT_BPPE
FROM BPPE
FOR ALL ENTRIES IN IT_TAB1
WHERE OBJNR EQ IT_TAB1-CO_OBJNR
AND POSIT EQ IT_TAB1-POSIT
AND GJAHR EQ RYEAR
AND VORGA IN ('KBFR','KBUE','KBUS').
LOOP AT IT_BPPE.
MOVE-CORRESPONDING IT_BPPE TO IT_BPPE1.
IT_BPPE1-RFISTL = IT_BPPE1-OBJNR+6(4).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_BPPE1-RFISTL
IMPORTING
OUTPUT = IT_BPPE1-RFISTL.
CALL FUNCTION 'FM_FIPEX_GET_FROM_POSIT'
EXPORTING
I_FIKRS = 'NFFM'
I_POSIT = IT_BPPE1-POSIT
IMPORTING
E_FIPEX = IT_BPPE1-FIPEX.
PERIOD1 = PERIO.
DO PERIOD3 TIMES.
CASE PERIOD1.
WHEN 1.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP01.
WHEN 2.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP02.
WHEN 3.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP03.
WHEN 4.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP04.
WHEN 5.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP05.
WHEN 6.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP06.
WHEN 7.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP07.
WHEN 8.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP08.
WHEN 9.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP09.
WHEN 10.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP10.
WHEN 11.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP11.
WHEN 12.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP12.
ENDCASE.
IF PERIOD2 >= PERIOD1.
PERIOD1 = PERIOD1 + 1.
ENDIF.
ENDDO.
COLLECT IT_BPPE1.
CLEAR PERIOD1.
CLEAR IT_BPPE1.
ENDLOOP.
SELECT RYEAR
FIKRS
RFISTL
RFIPEX
HSL01
HSL02
HSL03
HSL04
HSL05
HSL06
HSL07
HSL08
HSL09
HSL10
HSL11
HSL12
HSL13
HSL14
HSL15
HSL16
INTO TABLE IT_FMIT FROM FMIT
FOR ALL ENTRIES IN IT_BPPE1
WHERE RYEAR EQ RYEAR
AND FIKRS EQ 'NFFM'
AND RFIPEX EQ IT_BPPE1-FIPEX
AND RFIPEX IN FIPEX
AND RFISTL EQ IT_BPPE1-RFISTL.
LOOP AT IT_FMIT.
MOVE-CORRESPONDING IT_FMIT TO IT_FMIT1.
PERIOD1 = PERIO.
DO PERIOD3 TIMES.
CASE PERIOD1.
WHEN 1.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL01.
WHEN 2.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL02.
WHEN 3.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL03.
WHEN 4.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL04.
WHEN 5.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL05.
WHEN 6.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL06.
WHEN 7.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL07.
WHEN 8.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL08.
WHEN 9.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL09.
WHEN 10.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL10.
WHEN 11.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL11.
WHEN 12.
IT_FMIT1-TOTAL = IT_FMIT1-TOTAL + IT_FMIT-HSL12.
ENDCASE.
IF PERIOD2 >= PERIOD1.
PERIOD1 = PERIOD1 + 1.
ENDIF.
ENDDO.
IT_FMIT1-TOTAL1 = IT_FMIT1-TOTAL * -1 .
COLLECT IT_FMIT1.
CLEAR PERIOD1.
CLEAR IT_FMIT1.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form PROCESS_DATA
text
--> p1 text
<-- p2 text
FORM PROCESS_DATA .
SORT IT_FMIT1 BY FIKRS RFISTL RFIPEX.
SORT IT_BPPE1 BY RFISTL FIPEX.
LOOP AT IT_BPPE1.
IT_FINAL-RFISTL = IT_BPPE1-RFISTL.
IT_FINAL-RFIPEX = IT_BPPE1-FIPEX.
IT_FINAL-ALLOC = IT_BPPE1-TOTAL2.
READ TABLE IT_FMIT1 WITH KEY RFISTL = IT_BPPE1-RFISTL RFIPEX = IT_BPPE1-FIPEX.
IF SY-SUBRC EQ 0.
IT_FINAL-USED = IT_FMIT1-TOTAL1.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FMIT1-RFIPEX
IMPORTING
OUTPUT = IT_FMIT1-RFIPEX.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FMIT1-RFISTL
IMPORTING
OUTPUT = IT_FMIT1-RFISTL.
Changes made on 13/11/2007 *******************************
SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'
AND FIPEX EQ IT_FMIT1-RFIPEX.
SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'
AND FIPEX EQ IT_BPPE1-FIPEX.
Changes made on 13/11/2007 *******************************
SELECT SINGLE BEZEICH INTO IT_FINAL-BEZEICH FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FICTR EQ IT_FMIT1-RFISTL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FINAL-RFIPEX
IMPORTING
OUTPUT = IT_FINAL-RFIPEX.
IT_FINAL-REMAIN = IT_FINAL-ALLOC - IT_FINAL-USED.
APPEND IT_FINAL.
CLEAR IT_FINAL.
ENDLOOP.
SORT IT_FINAL BY FIKRS RFISTL RFIPEX.
LOOP AT IT_FMIT1.
READ TABLE IT_FINAL WITH KEY RFISTL = IT_FMIT1-RFISTL RFIPEX = IT_FMIT1-RFIPEX.
IF SY-SUBRC NE 0.
IT_FINAL-RFISTL = IT_FMIT1-RFISTL.
IT_FINAL-RFIPEX = IT_FMIT1-RFIPEX.
IT_FINAL-USED = IT_FMIT1-TOTAL1.
IT_FINAL-ALLOC = '0'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FMIT1-RFIPEX
IMPORTING
OUTPUT = IT_FMIT1-RFIPEX.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FMIT1-RFISTL
IMPORTING
OUTPUT = IT_FMIT1-RFISTL.
SELECT SINGLE TEXT1 INTO IT_FINAL-TEXT FROM FMCIT WHERE SPRAS EQ 'EN'
AND FIPEX EQ IT_FMIT1-RFIPEX.
SELECT SINGLE BEZEICH INTO IT_FINAL-BEZEICH FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FICTR EQ IT_FMIT1-RFISTL.
IT_FINAL-REMAIN = IT_FINAL-ALLOC - IT_FINAL-USED.
APPEND IT_FINAL.
CLEAR IT_FINAL.
ELSE.
DELETE IT_FMIT1.
ENDIF.
ENDLOOP.
SORT IT_FINAL BY FIKRS RFISTL RFIPEX.
ENDFORM. " PROCESS_DATA
*& Form GET_DATA1
text
--> p1 text
<-- p2 text
FORM GET_DATA1 .
SELECT KOKRS KOSTL BUKRS OBJNR INTO TABLE IT_CSKS
FROM CSKS
WHERE KOKRS EQ '1000'
AND KOSTL IN KOSTL
AND BUKRS EQ 'NFCL'.
SELECT OBJNR
GJAHR
KSTAR
BEKNZ
WKG001
WKG002
WKG003
WKG004
WKG005
WKG006
WKG007
WKG008
WKG009
WKG010
WKG011
WKG012
FROM COSP
INTO TABLE IT_COSP
FOR ALL ENTRIES IN IT_CSKS
WHERE OBJNR EQ IT_CSKS-OBJNR
AND GJAHR EQ RYEAR
AND KSTAR IN HKONT.
LOOP AT IT_COSP.
MOVE-CORRESPONDING IT_COSP TO IT_COSP2.
PERIOD1 = PERIO.
DO PERIOD3 TIMES.
CASE PERIOD1.
WHEN 1.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG001.
WHEN 2.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG002.
WHEN 3.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG003.
WHEN 4.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG004.
WHEN 5.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG005.
WHEN 6.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG006.
WHEN 7.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG007.
WHEN 8.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG008.
WHEN 9.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG009.
WHEN 10.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG010.
WHEN 11.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG011.
WHEN 12.
IT_COSP2-TOTAL = IT_COSP2-TOTAL + IT_COSP-WKG012.
ENDCASE.
IF PERIOD2 >= PERIOD1.
PERIOD1 = PERIOD1 + 1.
ENDIF.
ENDDO.
IT_COSP2-OBJNR1 = IT_COSP2-OBJNR+10(6).
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_COSP2-OBJNR1
IMPORTING
OUTPUT = IT_COSP2-OBJNR1.
CONCATENATE 'FSNFFM' IT_COSP2-OBJNR1 INTO IT_COSP2-OBJNR1.
IT_COSP2-FIPEX = IT_COSP2-KSTAR.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_COSP2-FIPEX
IMPORTING
OUTPUT = IT_COSP2-FIPEX.
CALL FUNCTION 'FM_POSIT_GET_FROM_FIPEX'
EXPORTING
I_FIKRS = 'NFFM'
I_FIPEX = IT_COSP2-FIPEX
I_FLG_BUFFER_ALL =
IMPORTING
E_POSIT = IT_COSP2-POSIT
TABLES
T_FMPOSIT =
EXCEPTIONS
INPUT_ERROR = 1
DATA_NOT_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONDENSE IT_COSP2-OBJNR1.
CONDENSE IT_COSP2-POSIT.
COLLECT IT_COSP2.
CLEAR PERIOD1.
CLEAR IT_COSP2.
ENDLOOP.
SORT IT_COSP2 BY OBJNR KSTAR.
SELECT OBJNR
POSIT
GJAHR
WLP01
WLP02
WLP03
WLP04
WLP05
WLP06
WLP07
WLP08
WLP09
WLP10
WLP11
WLP12
INTO TABLE IT_BPPE
FROM BPPE
FOR ALL ENTRIES IN IT_COSP2
WHERE OBJNR EQ IT_COSP2-OBJNR1
AND POSIT EQ IT_COSP2-POSIT
AND GJAHR EQ RYEAR
AND VORGA IN ('KBFR','KBUE','KBUS').
LOOP AT IT_BPPE.
MOVE-CORRESPONDING IT_BPPE TO IT_BPPE1.
PERIOD1 = PERIO.
DO PERIOD3 TIMES.
CASE PERIOD1.
WHEN 1.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP01.
WHEN 2.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP02.
WHEN 3.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP03.
WHEN 4.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP04.
WHEN 5.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP05.
WHEN 6.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP06.
WHEN 7.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP07.
WHEN 8.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP08.
WHEN 9.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP09.
WHEN 10.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP10.
WHEN 11.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP11.
WHEN 12.
IT_BPPE1-TOTAL2 = IT_BPPE1-TOTAL2 + IT_BPPE-WLP12.
ENDCASE.
IF PERIOD2 >= PERIOD1.
PERIOD1 = PERIOD1 + 1.
ENDIF.
ENDDO.
COLLECT IT_BPPE1.
CLEAR PERIOD1.
CLEAR IT_BPPE1.
ENDLOOP.
ENDFORM. " GET_DATA1
*& Form PROCESS_DATA1
text
--> p1 text
<-- p2 text
FORM PROCESS_DATA1 .
LOOP AT IT_COSP2.
IT_FINAL1-GJAHR = IT_COSP2-GJAHR.
IT_FINAL1-KSTAR = IT_COSP2-KSTAR.
IT_FINAL1-TOTAL1 = IT_COSP2-TOTAL.
SELECT SINGLE KOSTL FROM CSKS INTO IT_FINAL1-KOSTL WHERE KOKRS = '1000'
AND BUKRS EQ 'NFCL'
AND OBJNR = IT_COSP2-OBJNR.
READ TABLE IT_BPPE1 WITH KEY OBJNR = IT_COSP2-OBJNR1 POSIT = IT_COSP2-POSIT.
IF SY-SUBRC EQ 0.
IT_FINAL1-TOTAL3 = IT_BPPE1-TOTAL2.
ENDIF.
SELECT SINGLE KTEXT INTO IT_FINAL1-TEXT FROM CSKU WHERE SPRAS EQ 'EN'
AND KSTAR EQ IT_COSP2-KSTAR.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FINAL1-KOSTL
IMPORTING
OUTPUT = IT_FINAL1-KOSTL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = IT_FINAL1-KSTAR
IMPORTING
OUTPUT = IT_FINAL1-KSTAR.
SELECT SINGLE BEZEICH INTO IT_FINAL1-BEZEICH FROM FMFCTRT
WHERE SPRAS EQ 'EN'
AND FICTR EQ IT_FINAL1-KOSTL.
IT_FINAL1-VARIANCE = IT_FINAL1-TOTAL3 - IT_FINAL1-TOTAL1.
APPEND IT_FINAL1.
CLEAR IT_FINAL1.
ENDLOOP.
SORT IT_FINAL1 BY KOSTL KSTAR.
DELETE IT_FINAL1 WHERE KOSTL IS INITIAL.
ENDFORM. " PROCESS_DATA1
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG .
FIELDCATALOG-FIELDNAME = 'RFISTL'.
FIELDCATALOG-SELTEXT_M = 'Funds Center'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'BEZEICH'.
FIELDCATALOG-SELTEXT_M = 'Fund Center Description'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'RFIPEX'.
FIELDCATALOG-SELTEXT_M = 'Commitment Item'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'TEXT'.
FIELDCATALOG-SELTEXT_M = 'Commitment Item Description'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'ALLOC'.
FIELDCATALOG-SELTEXT_M = 'Allocated Budget'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'USED'.
FIELDCATALOG-SELTEXT_M = 'Used Budget'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'REMAIN'.
FIELDCATALOG-SELTEXT_M = 'Remaining Budget'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_FIELDCATALOG1
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG1 .
FIELDCATALOG-FIELDNAME = 'KOSTL'.
FIELDCATALOG-SELTEXT_M = 'Cost Center'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'BEZEICH'.
FIELDCATALOG-SELTEXT_M = 'Cost Center Description'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'KSTAR'.
FIELDCATALOG-SELTEXT_M = 'G/L Account'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'TEXT'.
FIELDCATALOG-SELTEXT_M = 'G/L Account Description'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'TOTAL3'.
FIELDCATALOG-SELTEXT_M = 'Planned amount'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'TOTAL1'.
FIELDCATALOG-SELTEXT_M = 'Actuals'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'VARIANCE'.
FIELDCATALOG-SELTEXT_M = 'Variance'.
FIELDCATALOG-DO_SUM = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM. " BUILD_FIELDCATALOG1
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form BUILD_SORT
text
--> p1 text
<-- p2 text
FORM BUILD_SORT .
DATA: GT_SORT TYPE SLIS_SORTINFO_ALV.
GT_SORT-UP = 'X'.
GT_SORT-FIELDNAME = 'RFISTL'.
GT_SORT-TABNAME = 'IT_FINAL'.
GT_SORT-SUBTOT = 'X'.
APPEND GT_SORT TO GD_SORT.
CLEAR GT_SORT.
GT_SORT-UP = 'X'.
GT_SORT-FIELDNAME = 'BEZEICH'.
GT_SORT-TABNAME = 'IT_FINAL'.
APPEND GT_SORT TO GD_SORT.
CLEAR GT_SORT.
ENDFORM. " BUILD_SORT
*& Form BUILD_SORT1
text
--> p1 text
<-- p2 text
FORM BUILD_SORT1 .
DATA: GT_SORT TYPE SLIS_SORTINFO_ALV.
GT_SORT-UP = 'X'.
GT_SORT-FIELDNAME = 'KOSTL'.
GT_SORT-TABNAME = 'IT_FINAL'.
GT_SORT-SUBTOT = 'X'.
APPEND GT_SORT TO GD_SORT.
CLEAR GT_SORT.
GT_SORT-UP = 'X'.
GT_SORT-FIELDNAME = 'BEZEICH'.
GT_SORT-TABNAME = 'IT_FINAL'.
APPEND GT_SORT TO GD_SORT.
CLEAR GT_SORT.
ENDFORM. " BUILD_SORT1
*& Form BUILD_EVENTS
text
--> p1 text
<-- p2 text
FORM BUILD_EVENTS .
IT_EVENT-NAME = 'TOP_OF_PAGE'.
IT_EVENT-FORM = 'TOP_OF_PAGE'.
APPEND IT_EVENT TO IT_EVENT1.
CLEAR IT_EVENT.
ENDFORM. " BUILD_EVENTS
*& Form TOP_OF_PAGE
ALV TOP-OF-PAGE
FORM TOP_OF_PAGE. "#EC CALLED
REFRESH : IT_LIST_TOP_OF_PAGE.
CLEAR : IT_LINE.
IT_LINE-TYP = 'H'.
IT_LINE-INFO = TEXT-001.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
CLEAR IT_LINE.
IF RADIO EQ 'X'.
IT_LINE-TYP = 'S'.
IT_LINE-INFO = TEXT-101.
IF NOT FIPEX-LOW IS INITIAL.
CONCATENATE TEXT-101 '-' FIPEX-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.
IF NOT FIPEX-HIGH IS INITIAL.
CONCATENATE TEXT-101 '-' FIPEX-LOW 'to' FIPEX-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
CLEAR IT_LINE-INFO.
IT_LINE-INFO = TEXT-102.
IF NOT RFISTL-LOW IS INITIAL.
CONCATENATE TEXT-102 '-' RFISTL-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.
IF NOT RFISTL-HIGH IS INITIAL.
CONCATENATE TEXT-102 '-' RFISTL-LOW 'to' RFISTL-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
ENDIF.
IF RADIO1 EQ 'X'.
CLEAR IT_LINE-INFO.
IT_LINE-INFO = TEXT-105.
IF NOT KOSTL-LOW IS INITIAL.
CONCATENATE TEXT-105 '-' KOSTL-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.
IF NOT KOSTL-HIGH IS INITIAL.
CONCATENATE TEXT-105 '-' KOSTL-LOW 'to' KOSTL-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
CLEAR IT_LINE-INFO.
IT_LINE-INFO = TEXT-106.
IF NOT HKONT-LOW IS INITIAL.
CONCATENATE TEXT-106 '-' HKONT-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.
IF NOT HKONT-HIGH IS INITIAL.
CONCATENATE TEXT-106 '-' HKONT-LOW 'to' HKONT-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
ENDIF.
CLEAR IT_LINE-INFO.
IT_LINE-INFO = TEXT-103.
IF NOT PERDE-LOW IS INITIAL.
CONCATENATE TEXT-103 '-' PERDE-LOW INTO IT_LINE-INFO SEPARATED BY SPACE.
IF NOT PERDE-HIGH IS INITIAL.
CONCATENATE TEXT-103 '-' PERDE-LOW 'to' PERDE-HIGH INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
CLEAR IT_LINE-INFO.
IT_LINE-INFO = TEXT-104.
IF NOT RYEAR IS INITIAL.
CONCATENATE TEXT-104 '-' RYEAR INTO IT_LINE-INFO SEPARATED BY SPACE.
ENDIF.
APPEND IT_LINE TO IT_LIST_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGE
*& Form DISPLAY_ALV_REPORT
text
--> p1 text
<-- p2 text
FORM DISPLAY_ALV_REPORT .
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GD_REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
IS_LAYOUT = GD_LAYOUT
IT_EVENTS = IT_EVENT1[]
IT_FIELDCAT = FIELDCATALOG[]
IT_SORT = GD_SORT[]
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "DISPLAY_ALV_REPORT
*& Form DISPLAY_ALV_REPORT1
text
--> p1 text
<-- p2 text
FORM DISPLAY_ALV_REPORT1 .
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GD_REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
IS_LAYOUT = GD_LAYOUT
IT_EVENTS = IT_EVENT1[]
IT_FIELDCAT = FIELDCATALOG[]
IT_SORT = GD_SORT[]
TABLES
T_OUTTAB = IT_FINAL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSG -
Urgent ......regarding date format in SAP Script
In my MAIN WINDOW I have date fields like Date of Manifacture, created date and Expiry date.
So, currently I am using SET DATE MASK = 'YYYY-MM' and it is printing same format for all fields.
But now my requirement is I want to show date for Expiry Date like 'YYYY-MM-DD'. For this I defined one temparary variable in the form like below
DEFINE &outdate& = &mchar-vfdat&
SET &outdate& MASK = 'YYYY-MM-DD'.
but still it is showing format YYYY-MM...
Plz help me how to print my desired date format...
I am waiting for ur reply...
Regards,
KumarHi Kishore kumar,
What you can do is befor printing the Expiry date set the date Mask as 'YYYY-MM-DD' and after printing your Expiry Date again set the DATE MASK to 'YYYY-MM'
i.e.
/: SET DATE MASK = 'YYYY-MM-DD'
&mchar-vfdat&
/: SET DATE MASK = 'YYYY-MM'
Regards,
Sunil
Maybe you are looking for
-
Error in PDF export / 'crdb_p2sifmx.dll Error
Hello Network, i got a problem while i try to export a document to pdf. Nearly all documents are okay, but one type doesn't work. I get an error that the DLL crdb_p2sifmx.dll' doesn't able to load. How can i fix this problem. I have VS2008 with Repor
-
Problem during mapping when stored procedures is used
Dear All, I am doing one File-XI-JDBC scenario using stored procedures. My source Data Type is like: MT_HEADER 1..1 PRODH 1..1 xsd:string VTEXT 1..1 xsd.string DATUM 1..1 xsd.string My target Data Type is like: MT_HEAD
-
Sqlloader -350 illegal combination of non alphanumeric character
hi all, i'm using owb 10.2.0.1 i have a file in my D:\2122008.txt and a table in oracle DB created a map from file to table..... generated a code and saved in D:\orahome_1\owb\codegen\ctl\Employee.ctl deployed in target database... when is start from
-
Charging problem with nokia 603
Hi, I just bought Nokia 603 one week back but i had to give it back to nokia are for charging problem, anyway my point is all nokia hardly had problems with charging but now with nokia 603 it is really strange. Can Nokia please check in to this
-
!!!!!!Urgent!!!!!!!! Refresh Logic
can anybody please temme abt the refresh logic like how can we refresh the contents of a page with a java code . our case is like there are 2 pages main page contains a view and popup page will update some of the values of the view. when we click a u