URGENT::Regarding Free Characteristics.

Hi All,
I have some free characteristics like sec cost center 1 and sec cost center 2 in a query.
And a primary cost center and multiple cost center flag(this will be set to "Y" when there is a sec cost center corresponding to this primary cost center) in rows.
In the report I want to view only primary cost center and multiple cost center flag. When the flag is 'Y', the user can click on the flag which in turn should display the secondary cost centers.
Please help me out to implement this logic.
Quick help would be appreciated.
Thanks in advance.
Anjum.
Edited by: nasarat anjum on Feb 13, 2008 3:36 PM

I think that may be fine. There are some threads out here that talk about people having issues with x number of free chars...it might be good to look at those as well.

Similar Messages

Free characteristics Functioanlity is not working please advice

HI
I got an problem in the report with the multiprovider ZCOPA_M01
If I open the report for this multiprovider and there are 2 default characteristics displayed in the query and after removing the drill down for those two characteristics and Now IF I go to Free characteristics and do an drill down on one of the characteristic (for example: Geographical Type)and place an filter on the Geographical Region (Geographical region is also an free characteristic) now I find no values in the set filter screen.
But when I again remove the drill down on Geographical type and do an drill down on geographical region and set an filter on geographical region then you can see all the values...(In filter screen)
Can any one please advice me for the same. How to get values in the filter screen for this report with the Multiprovider ZCOPA_M01
Thanks in advance and will be rewarded with good points...

Hi,
Go to the definition of a Master Data Object. In its Attributes tab, there is a column of navigation on/off. There you can either swith on or off the attribute as a navigational attribute. After converting into navigational attribute, you can see the type column is changes to "NAV" from "DIS".
Hope this helps.
Regards,
Yogesh.
Edited by: Yogesh Kulkarni on May 27, 2008 4:14 PM

Grouping Free Characteristics in Query Designer?

Hello,
I have a couple reports that per busniess have many free characteristics. So many that that they do not fit on one page and you must continue scrolling the page down to view all. This makes the report look sloppy but the business owner wants all of these free characteristics. I'm looking for a way to clean up the list of free characteristics without removing any selections. Can they be grouped up or consolidated through Query Designer or WAD?
Thank You,
Alex

Hi Alex,
Actually use of free characteristic will not slow down the report performance rather free characteristics are used to enable the user for dynamic drilldown and to improve the query performance for initial output display.
What you can suggest your users is to keep only required free characteristics and then remove the rest of the characteristics and from grouping perspective all the free characteristics in query designer output are shown alphabetically so you can not manipulate the group in designer.
Regards,
Durgesh.

Filtering free characteristics issue

Hi Sdns,
i am unable to fileter the free characteristics in Bex query analyser.But i can do the same in Bex query designer.
Bex anlayser goes back to the normal excel sheet with out displaying any error messages while i am tring to filter the free characteristic.
Advance Thanks to replies.
karun

Hi,
You are trying to filter in query output or workbook. If workbook refresh the workbook once after it is opened and go for filter.
You can filter by right clicking any of the free characteristic and choosing select filter value.
or Do you have problem in setting filter in query designer.
Regards,
Akhan

Problem with the display sequence of free characteristics in Bex Analyzer

Hello,
I want to display free characteristics in particular sequence in Bex Analyzer.
I have arranged free characteristics in particular sequence in bex designer but while executing the report from analyzer
free characteristics are not getting displayed in the sequence in which i wanted to display it in query output.
Could you please let me know what setting needs to be done in order to display free characteristics in required sequence in bex analyzer.
Regards,
Sanjay

Hi Sanjay:
Please observe that the sequence of Characteristics in BEx Analyzer is Alphabetic (in ascending order), I faced a similar situation once and I solved it by adding a prefix to the Characteristic Name at the query level, for example.
Customer
Distribution Channel
Division
Month
Sales Organization
Year
Could be sorted this way.
A01. Year
A02. Month
B01. Sales Organization
B02. Distribution Channel
B03. Division
C01. Customer
Regards,
Francisco Milán.

Can we add display characters to Free characteristics

hi Gurus,
I have a some material display attribute in the report and customer wants to add these display characters to free characteristics so that he wants to drill down with other charcters like plant. Can we add directly in query defination or do we need to convert to navigational attribute and then add as a free characteristics.
Regards,
Preety

Its not possible, even if you make navigational the parent char dta will only be coming.
If you are sure that the other char data will have same value for those attr,then go ahead and create nav.
If not you need to include those attr in the cube.
Hope its clear
Cheers,
Shana
Thanks = pts in SDN

Order of free characteristics in standard webtemplate

Hi Gurus,
i created a query with query designer. In Excel anything is fine. Also the order of the free characteristics in the navigation panel on the left side is as defined in query. But if i start the query in web i got a problem. In web the order of the free characteristics in the navigation pane is alphabetically and not as defined in the query designer. Any ideas?
Regards,
Adem

Hey,
I guess it's problematic. Since you wanna still have the standard web template general, you cant fix the sequence you like by changing it.
I don't think it's possible.
The only way is to create a new web template in which u have the correct sequence and than running the web template instead of the query.
Tomer.

Poor Runtime (Client) with many free characteristics

Hi all,
We are running BW 3.5 with BEx Analyzer (Office 2003).
Most of our queries have quite a lot of free characteristics (up to 50). However, the initial view of all queries is rather small (usually less than 30 cells in result area).
For some reason the client runtime of these queries is extremely poor (avg > 10 seconds) and makes up to 85% of the average total query runtime.
The only exception is a static query w/o any free characteristics (avg client time < 3 sec.).
Has anyone experienced the same? Is there a connection between the client runtime and the number of free characteristics (regardless of the number of cells in the result area)?
Does anyone know how to improve client runtime in our situation?
Any help is appreciated!
Regards,
Christian

Christian,
It seems that the problem might be caused by the recalculation functionality in Excel. Do you have any other excel workbooks open at the same time?
There is an OSS note on this problem
In addition you can add the following code in the workbook in a self defined refresh button.
Sub Refresh()
'This routine refreshes all queries within this workbook
    CalculationStatus = Application.Calculation 'turn off automatic calculation
    Application.Calculation = xlCalculationManual
    Run "SAPBEX.XLA!SAPBEXrefresh", True
    Application.Calculation = CalculationStatus
End Sub
The code will switch off the excel recalculation functionality before refreshing the queries and then switch it back on again.
I hope this helps.
Jesper Christensen

Changes of Free Characteristics Order

Sometimes free characteristics switch places from one time to another when you do refresh of a query. We discovered it when we tried to copy an existing query (sheet 1) to sheet 2. How can one prevent this??
Thanks
Sabine

Hi Sabine,
If you have not changed the query definition at all then the free characteristics will not change positions. I think in sheet1 probably the query's local view was changed .. You can try copying the same query from sheet2 to sheet3 and check.
Regards.

Hierarchy Authorization in free characteristics not working

Hi,
we found aproblem while running a query with authorization objects for a hierarchy node (0SALES_OFF).
- Z_HPRODPIS (Hierarchy for sales offices) with fields:
- 0SALES_OFF Sales Office
- 0TCTAUTHH Authorization for hierarchy
We create hierarchy authorization for nodes:
- Type of authorization 2
- Hierarchy level 3
We would like to have characteristic 0SALES_OFF in the free characteristics section when running the query.
In this case we get an error "No authorizations", but after drill down in rows, hierarchy node members for 0SALES_OFF are displayed.
Is this an usual behavior?
We would not like to create several queries, if we could cover user requirements with one query with several characteristics as free characteristics (also 0SALES_OFF).
Thanks, Tomaz

Hi !
have you tried restricting it with a variable?
with regards
ashwin

How to select more than one free characteristics in web report?

Hi,
From the performance point of view, I want to select more than one free characteristics to be displayed in WEB report.
I know in BEx Analyzer, we can do this by right mouse click and choose' query property' from the context menu, all the free characteristics are displayed in the popup window. But in WEB report these free char don't displayed in the 'query property' popup window.
Could anyone tell me how to implement this in WEB report?
Eileen

Hi,
each free characteristics in the list has two functions beside it, 'drilldown in rows' and 'drilldown in columns', but this functions as select only one free characteristics, each time you select one, the report will be loaded again.
if I want to select like 10 free characteristics, the report will be refreshed and reloaded 10 times.
my question is that how can I select these 10 free characteristics once to improve the performance.
your help will be appreciated. Thanks.
Eileen

Change the order of Free Characteristics in Context Menu

Hi Experts,
I execute a query on the Web Browser and right click on a cell (to see the Context Menu). I choose 'Change DrillDown' -> 'DrillDown By' and get a list of Free Characteristics.
However, the order in which the free characteristics appear in the Context Menu does not match the order of the Free Characteristics shown in the Navigation Pane (on the left side of the report).
This does not happen in BEx Analyzer (Excel), but only in the Web Browser.
I would like to know how to change the order of these characteristics in the context Menu.
Your solutions on this issue would be appreciated.
Thanks,
Shruti

Hi Shruti,
I am also using BEx Web analyser and I can see the same order as in the left pane when I select the Drilldown by
I think you might have used the Free Characteristics and when you want to exchange them/drag them back you may be having issue
Us drag and drop for the navigation. Generally,dropping one element over another exchanges them & Dropping out an element removes it from that place
Hope this helps
Sriman

Sequence of the FREE CHARACTERISTICS that appears in report

How can i change the Sequence of the FREE CHARACTERISTICS that appears in report.
I changed it in Query Designer but they are not appearing in the same as it listed in Query Designer as in report
In the report they are appearing in the alphabeatical sequence...but i want it to be in my desired sequence
Thanks

Is this a second hand iPhone?

Urgent: Regarding Join Syntax in Oracle 9i and 10g

Dear Members
Please help me by providing me the synatx of following Join statements for Oracle 9i and 10g:
1.Inner Join
2.Left Outer Join
3.Right Outer Join
4.Self Join
5.Cross Join
6.Full Outer Join
N.B. I NEED THIS HELP URGENTLY
Regards
Praveen Kumar Pandey

Inner join
SELECT *
FROM a,
       b
WHERE a.<<column>> = b.<<column>>Left Outer Join
SELECT *
FROM a LEFT OUTER JOIN b
         ON a.<<column>> = b.<<column>>Right Outer Join
SELECT *
FROM a RIGHT OUTER JOIN b
         ON a.<<column>> = b.<<column>>Full Outer Join
SELECT *
FROM a FULL OUTER JOIN b
         ON a.<<column>> = b.<<column>>Self Join
SELECT *
FROM a a1,
       a a2
WHERE a1.<<column>> = a2.<<column>>Cartesian Join
SELECT *
FROM a,
       bJustin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Crystal Report-BW Query free characteristics missing

Hello,
I am working on a crystal report against BW query, I am using SAP menu to build the report. I see that free characteristics not coming into the crystal report.
Question1: Is this an issue or is it designed to work this way?
Question2: As an alternative for this In BW query I have changed all the free characteristics into rows, now I am able to see all the fields but the data is becoming flat, when I try to role up the data for cretain fields it does not work correctly. Example: Role up of Rates (%). With database delegation option in webi role up work fine there but what about in crystal?
Thanks

Hi,
you are most likely using the old driver. make sure in the Settings in the SAP Toolbar you activate the option to use the MDX Driver.
ingo

URGENT::Regarding Free Characteristics.

Similar Messages

Maybe you are looking for