Urgent: regarding inspection plan

hi,
i want to make a report in which the changes made to insepction plan had been occured,plzz provide me help by giving tcodes,tables as help will be definately rewarded.

Hi,
Table is PLMK
tcodes im not sure check c201,c202,c203....
Cheers,
Will.

Similar Messages

Regarding Inspection Plan

Hi All,
Need clarification regarding Inspection Plan. We observe that in our company the inspection plan are created double record for a material. Actually we have two z-tcodes for creating inspection plan. The 1st is scheduled job which creates inspection plan automatically and with the second tcode ,we create inspection plan manually.
I would like to know what is the impact if we have 2 inspection plans for the same material. May i know why the program is creating double inspection plan though already one inspection plan is existing. Please suggest us how to avoid this.
Thanks in advance.

Hello Aditya,
first of all you should check the following:
The plan header (PLKO) has the following key fields Client (MANDT), Plan type (PLNTY), Plan number (PLNNR), Plan alternative (PLNAL) and Plan counter (ZAEHL) if you have created identical entries this would lead to a dump with DUPREC.
Then you have one other tables you should take into account:
Material plan assignment MAPL
and finally check the validity dates and if change numbers are used.
As long as there are no 2 identical plans, this shouldn't lead to any problems.
Maybe this is the information you need.
Regards
Isabelle

Inspection plan deleted

Hi,
My users have just "deleted" certain inspection plans. They marked the plan with the deletion flag. How can I take the deletion flag out of it.
Please this is very urgent!!!!!!
Charline

hi
if you have put the deletion flag it is possible reove it.just go to inspection plan in change mode (QP02),press the header details then remove the deletion flag indicator.
if you have run the QCR6 without archiving then it is not possible to revoke it
kindly refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/ce/fa9066f0bc11d283d60000e829fdb3/content.htm
regards
thyagarajan

Error while uploading Inspection plan

Dear Friends,
I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
Regards
Vivek

Hi,
Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
Vivek
Edited by: vivek mankad on Feb 23, 2010 7:57 AM

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

Sale Order / Project specific Inspection Plan

Dear All,
I want to create Sale order or Project specific inspection plan for a material. This is because, my customers want some specific inspection requirements for individual materials, which are assigned to Sale order or project. I want to inspect the material after receipt for these specific account assignments. I do not want to assign the customer because, my single customer may give different sale orders with different inspection requirements.
But in inspection plan, i can not see the assignment of sale order / project as i can see in Rate Routing.
Can anybody tell me about this?
Regards,
Prashant Kolhatkar

Create a Material ONE as Configurable Material. Assign 300 Class Type Class with Charcateristics created through CT04 Transaction which in turn linked to MICs.
Create another Material TWO with same Class but not configurable but is a Variant of Material ONE (MRP 3 View)
Maintain Configuration Profiles for both Materials.
In Material TWO, for insp. type details click on Insp. by Config indicator.
Whenever a Sales Order is created, maintain the requirements from the Customer in Characteristics and save the Sales Order. Against this Sales Order whenever a GR is made for respective Production Order inspection lot is created against the specifications given by Customer and not that maintained in inspection plan.
Best Regards,
K. Raghavendra Nayak

How to block deletion of Inspection Plan

Dear Experts
Accicendatally, our users are deleting the Inspection Plan,
Is there any authorisation object to make Restriction on this,Transaction is QP02.
Regards
Sandeep patil

Hi Sandeep,
As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
If you want to restrict this then you have to get help of security team. They will find role for this transaction -
> then they will find out the objects matanined in this role -
> this will display all the activities in that object -
> then they can cancel deletion activity from object list.
Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
Hope this resolves your issue, reward points if helpful.
Regards,
Avinash.

How to use Same Inspection plan for Multiple Plants?

Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...

Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh

ERROR WHEN CREATING INSPECTION PLAN

HI GURUS,
WHEN CREATE AN INSPECTION PLAN GET THE FOLLOWING ERROR
Op. 0010, CH 0180: Char. ident. SMS used for QDI several times in task list.
THIS BECAUSE MY CLIENT WANTS TO REPEAT THIS M.I.C TWICE.HOW CAN I SOLVE THIS
REGARDS
AMIT

Hi,
It is not a error message It is a warning message for Use the Same MIC in Multiple time, No problem just you can save the Inspection plan, It will not reflect any problem any where.
Regards,
S.Babusingh

Error while creating the Inspection plan by T.C QP01

Hello Friends,
In QP01, When i am trying to create a inspection plan system throwing the error message "The inspection plan identifier exists already. Enter another."
Message no. QP054
But in QP02, When i checked for that material, Plant, Group Number, Group counter, Usage, Status, i didn't find the entry over there.
Actually my requirement is to create a inspection plan for a material and plant combination with speicfic Usage as 61(customer requirement and status 4) but when i am trying to create that system throwing the error message explained above.
Thanks and Regards,
Jitendra Chauhan.
Edited by: jitendra chauhan on Jun 1, 2010 4:28 PM

Hello Friends,
Thanks for your valuable answers.
I checked in table MAPL, for a particular material, Plant, Group Number and Group Counter, there is no entry.
Where as in table PLKO, for a particular Group Number and Group Counter, entry is there. Actually this Inspection Plan Group Number and Group Counter is assigned to multiple materials through Material Assignment. If i delete the entry for this in table PLKO, than for all rest of the materials also entry will be deleted.
Hence how to resolve this?
Actually for other material number, same plant, same group number and same group counter, entry exist. So can i simply go in the inspection plan of other material,same plant,same group number,same group counter and than inside the material assignment to assign the required material code, plant and the group counter number?
Looking ahead for valuable inputs from the genius.
Thanks and Regards,
Jitendra
Edited by: jitendra chauhan on Jun 2, 2010 8:09 AM

Inspection lot creation based on "right" inspection plan version

I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date.
When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on the purchase order creation date and not , as now, based on good entry date
Is it possible ?
When I create the purchase order I send to vendor also the inspection plan characteristich that have to be maintened ; for this reason I need to find same characterist during good entry inspection
Regards
Silly

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

Master data changes not updated in Inspection Plan- QP01

Hi
We created all the QM master data . After that we did some changes in inspection chars and in the sampling master data.but the values are not reflecting in the Inspection plan . How to update the changes in the inspection plan. We are trying to find indIvidual as well as Mass update
Any input will he highly appreciated
Thanks
JJ

Dear JJ
Another easy method will be maintaining MIC as referenced mic. instead of maintaining it as complete copy model you can make it referenced. any changes in the mic can be updated automaticalyin the inspection plan using the referenced functionality.
The issue being wherever the mic goes will be changed,
Regards
gajesh

Inspection lot with inspection type 03 - Using Inspection plan

Dear friends,
I want to create an inspection lot at the time of production order release (ideally - insp type 03). But I want to use inspection plan as a task list instead of routing for that lot.
Is it possible?
Best Regards,
Avinash

Hi Swapnali,
Was expecting this re-question.
We are at a stage where system is already ready. The routing master data contains large number of alternatives and huge number of parallel sequences. We were looking for a solution in which we would make an inspection plan without touching routing master data. Second I want to create the lot at the time of order release (basically one lot per production order) so don't want to use insp type 04.
In config, I assigned task list type Q in front of lot origin 03 (Maintain Inspection Lot Origins and Assign Inspection Types).
But still system is picking the routing and not inspection plan. Is there a way out?
Regards,
Avinash

Inspection Plan while Purchase order

Dear MM Gurus,
i have following query, please guide
If Inspection Plan for particular material is not available, system should give alert or trigger message that Inspection Plan does not exist for the material and should not allow to create purchase order.
thanks in advance
kailash thakkar

Dear Kailash
This was discussed earlier in this link. please find below for same
Link: [Re: GR only if Inspection plan exists]
please let me know your feedback
Regards
gajesh

Assigning a different inspection plan to an inspection lot

Hi,
I have a situation where the incorrect inspection plan is assigned to an inspection lot. Is there any mechanism to assign a different inspection plan to an inspection lot i.e. without having to reverse a goods receipt.
Regards,

>
Shyamal Joshi wrote:
> Hi Kaushal,
>
> There are more than one reason for this error. Check the followings.
>
> - The key date for inspection lot should be later than the key date for the inspection plan, later then the date when you assigned the material to the plan.
> - The usage of lot and inspection plan should be same.
> - The status of inspection plan must be released.
>
> Regards,
> Shyamal
Why are you not checking these things I am sure the reason would be there only. If dont wana check it is your wish. Any ways best of luck

Urgent: regarding inspection plan

Similar Messages

Maybe you are looking for