Urgent:Regarding the Pre-Installation Tasks

Hi,
I have a scenario:
Currently, i have installed Oracle AS Infrastructure(D'base 10.1.0.5.0) as a pre-requisite for installing oracle Content DB.
My Question is : Is that mandatory that i have to again install oracle 10g database as pre-requisite before installing oracle content DB.
Please help me.
Regards,
- Sri

As long as you can perform all the pre-install steps using SQL*Plus (as the SYS user), and you can bring up and shut down the database, I think you will be fine. iFS manages it's own schema (default name: IFSSYS) and doesn't require SYSDBA or SYS access. The only time the SYS user is required is during installation and configuration. If your configuration is successful, you should be fine, as far as iFS is concerned.

Similar Messages

Regarding the Post Installation and SP Level

Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.G

the patch level of EP and NWDI should be same

The account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order, please respond as soon as possible.

My email account is invalid to access, please help me to connect to a new right email address. This is urgent for the pre-order process, please respond as soon as possible.
<Email Edited by Host>

This is a user-to-user technical support forum. No one here can help you.
Try
https://expresslane.apple.com

Regarding the pre requisites to connect to the hubspot

Hi Experts,
i had a requirement where my customer is placing the files in the hub spot.From there i need to pick the files in real time and should be routed to the C4C. so i am having the queries as follows
1. is it possible to connect to the hubspot
2. if so what are the pre-requisites i need to do
3. As per understanding i have to use the FTP transport protocol in file adapter.
Please guide me
Thanks
Giridhar

Hi pavan,
we checked with the hubspot team.they are not providing any support for the Ftp/ SFTP Protocols. so the only way you would be able to upload content to Hub Spot would be through our Content APIs as per the conversation. i.e they support the api's like json and python.
as per the following links and my understanding.
http://developers.hubspot.com/docs/methods/blogv2/post_blog_posts
http://developers.hubspot.com/docs/methods/files/post_files
http://developers.hubspot.com/docs/methods/pages/post_pages
what are possible adapters that support the api communication?
As per my understanding REST adapter supports the api communication.Please correct me if i am wrong.
Please suggest me .
Thanks
Giridhar

N95: regarding the pre-installed Nokia SEARCH app

Is it safe to uninstall this pre-loaded app and all the pre-loaded plugins? I find myself surfing the web more using Yahoo! and Opera. TIA!

should be totally safe, just go to the application manager and uninstall it from there.
yucca

Urgent regarding the Weblogic Application server

Hi,
In my previous applications I have used weblogic5.1.0 as our
Application server. Now we know that Weblogic 6.1 is the latest version
to implement
J2EE technologies. I want to know any problems are there in using
Weblogic 5.1.0 to implement J2EE technologies.
Please let me know any problems are there in using weblogic5.1.0
for J2EE technologies.
Thanks and Regards,
Seshu Srinivas

For a new project, you should shoot for 6.1sp2 ...
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"seshusrinivas" <[email protected]> wrote in message
news:[email protected]..
Hi,
Actually we want to start new project using j2ee technologies.Thing
is we are having some experience in weblogic5.1.0, then going for weblogic6.1
any advantages are there.
Thanks and Regards,
Bye
Seshu Srinivas
Cameron Purdy wrote:
Please let me know any problems are there in using
weblogic5.1.0
for J2EE technologies.Basically, none. Except it's a bit out of date.
Is that what you were asking?
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"seshusrinivas" <[email protected]> wrote in message
news:[email protected]..

Urgent Regarding the SAP Script

Hi all,
I am developing a SAP-Script in which there is table like
Description Resuts Parameters
uline
values values values
My doubt is using the driver program the values has to be printed. Can anybody provide the piece of code for these requirement.
Another doubt is in this script there 2 pages . But in the print preview i can see only 1 page . In the page setting i have given the next page as page2 . But still i m facing the same problem. In page there is no main page only footer, page no, and some std descptn window is available.
Depending on the 1 field i want to print the send field value i have change these things in the driver program so that the correct can be printed in the form.
With Regards,
Srinivas.

hi,
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
/: INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Message Edited By ,
Vani

Urgent: regarding the increasing the performance of report

Hi,
I had a report which is displaying the correct data but i execute on PRD Server,it gets Request Time Out.So i want to increase the performance of it.Plzz help me out in doing this.
REPORT ZWIP_STOCK NO STANDARD PAGE HEADING LINE-SIZE 150.
TABLES: AFPO, AFRU, MARA, MAKT.
DATA: BEGIN OF ITAB OCCURS 0,
      AUFNR LIKE AFPO-AUFNR,
      MATNR LIKE AFPO-MATNR,
      LGORT LIKE AFPO-LGORT,
      MEINS LIKE MARA-MEINS,
      NTGEW LIKE MARA-NTGEW,
      MTART LIKE MARA-MTART,
      STOCK TYPE P LENGTH 10 DECIMALS 3,
      END OF ITAB.
DATA : ITAB2 LIKE ITAB OCCURS 0 WITH HEADER LINE.
DATA : DESC LIKE MAKT-MAKTX.
SELECT-OPTIONS : MAT_TYPE FOR MARA-MTART.
SELECT-OPTIONS : P_MATNR FOR AFPO-MATNR.
DATA : V_MINOPR LIKE AFRU-VORNR,
       V_MAXOPR LIKE AFRU-VORNR,
       V_QTYMIN LIKE AFRU-GMNGA,
       V_QTYMAX LIKE AFRU-GMNGA,
       V_QTY TYPE P LENGTH 10 DECIMALS 3.
        SELECT AAUFNR AMATNR ALGORT BMEINS BNTGEW BMTART FROM AFPO AS A
          INNER JOIN MARA AS B ON AMATNR = BMATNR
            INTO TABLE ITAB WHERE ELIKZ <> 'X' AND MTART IN MAT_TYPE AND A~MATNR IN P_MATNR.
    ITAB2[] = ITAB[].
    SORT ITAB2 BY MATNR MEINS MTART NTGEW.
    DELETE ADJACENT DUPLICATES FROM ITAB2 COMPARING MATNR MEINS MTART NTGEW.
   LOOP AT ITAB2.
    V_QTY = 0.
      LOOP AT ITAB WHERE MATNR = ITAB2-MATNR.
        SELECT MIN( VORNR ) INTO V_MINOPR FROM AFRU WHERE AUFNR = ITAB-AUFNR.
        SELECT MAX( VORNR ) INTO V_MAXOPR FROM AFRU WHERE AUFNR = ITAB-AUFNR.
        SELECT SUM( GMNGA ) INTO V_QTYMIN FROM AFRU WHERE AUFNR = ITAB-AUFNR AND VORNR = V_MINOPR.
        SELECT SUM( GMNGA ) INTO V_QTYMAX FROM AFRU WHERE AUFNR = ITAB-AUFNR AND VORNR = V_MAXOPR.
        V_QTY = V_QTY + V_QTYMIN - V_QTYMAX.
      ENDLOOP.
      ITAB2-STOCK = V_QTY.
      MODIFY ITAB2.
    ENDLOOP.
    LOOP AT ITAB2.
          WRITE:/ ITAB2-MATNR,ITAB2-STOCK.
    ENDLOOP.

Instead of code from
itab2[] = itab[] till last endloop try code given below
data : begin of minopr occurs 0,
       aufnr type afru-aurnr,
       vornr type afru-vornr,
       end of minopr.
data : begin of maxopr occurs 0,
       aufnr type afru-aurnr,
       vornr type afru-vornr,
       end of maxopr.
data : begin of qtymin occurs 0,
       aufnr type afru-aurnr,
       vornr type afru-vornr,
       end of qtymin.
data : begin of qtymax occurs 0,
       aufnr type afru-aurnr,
       vornr type afru-vornr,
       end of qtymax.
select aurnr vornr into table minopr from afru for all entries in itab where aurnr = itab-aufnr
maxopr[] = minopr[].
sort minopr by aufnr vornr ascending.
sort maxopr by aufnr vornr descending.
delete adjacent duplicates from minopr comparing aufnr.
delete adjacent duplicates from maxopr comparing aufnr.
SELECT aufnr vornr GMNGA INTO TABLE QTYMIN FROM AFRU for all entries in minopr WHERE AUFNR = minopr-AUFNR AND VORNR = MINOPR-vornr.
SELECT aufnr vornr GMNGA INTO TABLE QTYMAX FROM AFRU for all entries in maxopr WHERE AUFNR = maxopr-AUFNR AND VORNR = maxopr-vornr.
sort qtymin by aufnr.
sort qtymax by aufnr
sort itab by matnr MEINS MTART NTGEW.
LOOP AT ITAB.
v_minopr = 0.
v_maxopr = 0.
read table qtymin with key aufnr = itab-aufnr binary search.
if sy-subrc = 0.
loop at qtymin from sy-tabix.
if qtymin-aufnr = itab-aufnr.
V_MINOPR = V_MINOPR + itab-gmnga.
else.
exit.
endif.
endloop.
endif.
read table qtymax with key aufnr = itab-aufnr binary search.
if sy-subrc = 0.
loop at qtymax from sy-tabix.
if qtymax-aufnr = itab-aufnr.
V_MaxOPR = V_MaxOPR + itab-gmnga.
else.
exit.
endif.
endloop.
endif.
V_QTY = V_QTY + V_QTYMIN - V_QTYMAX.
At new itab-matnr.
if sy-tabix = 1.
continue.
endif.
itab2 = itab.
itab2-stock = v_qty.
append itab2.
V_QTY = 0.
endat.
ENDLOOP.
itab2 = itab.
itab2-stock = v_qty.
append itab2.
LOOP AT ITAB2.
WRITE:/ ITAB2-MATNR,ITAB2-STOCK.
ENDLOOP.

Regarding the various installations with Eclipse.

Hi,
Previously I have installed the jdk1.4 version @c:\Program Files\Java\j2re1.4.2_10.
Then I have copied the Eclipse verison3.2
Then I have installed the jdk1.4 version at some other location c"\j2sdk1.4.2_10.
I have removed the jdk version 1.4 which was at c:\Program Files\Java\j2re1.4.2_10.
Now If I try to open the eclipse its giving an error saying that
" Error: could not open 'c:\Program Files\Java\j2re1.4.2_10\lib\i386\jvm.cfg' "
Followed by
some eclipse warnings.
Please can anyone tell me how to change the jvm path to the eclipse.
Thanks.

swappolube speeds up the applications memory processing, it speeds up the data reading from the hard drive, its really awesome and not risky.
it doesn't matter if you overclock or implement swappolube first, its the same thing if you did one before the other, and no black plastic isn't required, its just that it has super fast transitions, but i recommand using 'theme customizer' you can get the same fast transitions with this awesome package, don't forget you'll find it in the settings after you install it .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Pre-installation cluvfy check fails on local nodes

I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.
I have completed all the pre-installation tasks (I hope) and would like to verify this by running:
cluvfy comp sys -p database -n all
using the standalone download of cluvfy - I haven't installed any Oracle software as yet.
This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems:
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112] The result string is: Access is denied. 1
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.startRemoteExecServer:2156] _WS_ Failed to delete Service OracleRemExecService on PRDAT217
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.206 BST ] [RemoteExecCommand.setupRemoteExecService:748] Start remoteExecServer failed with Execptionoracle.ops.mgmt.nativesystem.NativeException: PRKN-1016 : Failed to create service "OracleRemExecService" on node "PRDAT217", Error: "Access is denied.".
[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.206 BST ] [RemoteExecCommand.execute:421] NativeException occured while setting up RemoteExecService. err msg:PRKN-1016 : Failed to create service "OracleRemExecService" on node "PRDAT217", Error: "Access is denied.
However, there is a folder in the temporary destination call oraremservice and there are DLL files and the RemoteExecService.exe in there.
In the temp directory there are a number of log files called e.g. sprvmcli_9885533.log (the number is generated uniquely each time),
When running against the local node, these contain the following:
10/01/13 14:44:42 Trying to open a named pipe
10/01/13 14:44:42 About to open pipe
10/01/13 14:44:42 calling create file
10/01/13 14:44:42 Error opening the pipe 5
10/01/13 14:44:42 sprvcli: retval = 7
When the cluvfy runs successfully against the remote node, this has much more information in, and the errors do not occur.
Am I using the cluvfy utility incorrectly for this stage of the operation, or is there something wrong with my setup?

first Confirm the connectivity between all of the nodes:
Cluvfy comp nodecon –n all –verbose
Thanks,
gssdba.wordpress.com

Pre install task for fresh R12 installation

Please verify the following pre installation tasks..
R12.0.4 installation on OEL5.2 x86_64
i did all pre install steps given in the metalink note
started httpd,nfs,network,vftpd,ssh services.
if i miss something please remind me...
thanks in advance

Hi,
If you have followed all the required pre-installation steps, then you should be OK. However, no one can guarantee that your installation will go smooth unless you try it yourself.
Good Luck!
Regards,
Hussein

Post Installation task of Enterprise Portal

Subject : During the Post Installation task of Enterprise Portal such as Run Configuration Wizard u201CNWA_01u2026..u201D to u201CNWA_07u2026..u201D for portal system. Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.
Problem : Can anyone guide me how we are doing ( executing ) task i.e.Run u201CInitial setup of functional unit Development Infrastructure (DI all-in-one)u201D in development portal.What this is step is doing as well as what all the prerequisites for this step.
Work Area : Dev portal with Java stack only.( SP Level is 17)
Please guide me on this step as well as all Configuration Wizard steps( NWA_01 to NWA_07) so that I can finish with the post installation of portal.
Regards
Nilesh

Hi my question has been resolved.

URGENT, Creating the Oracle Inventory Group

OS: 5.2
DB:10g Rel 2
Hello All,
I am installing 10g on AIX.
Per below link/document.
Page 2-11 (Pre Installation Task)
$ more /etc/oraInst.loc
/etc/oraInst.loc: A file or directory in the path name does not exist.
** Creating the Oracle Inventory Group
If the oraInst.loc file does not exist, then create the Oracle Inventory group by
using the following procedure:
1. Enter the following command:
smitty security
Choose the appropriate menu items to create the oinstall group.
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b19075.pdf
But I alreday created oinstall group.
Please note: we used oraabc instead of oracle.
id oraabc
uid=207(oraabc) gid=14(oinstall) groups=15(dba),16(oper)
Do I still need to create the oraInst.loc file or its is a part of installation?
DN

As far I know oraInst.loc file is created during installation procedure.
It consists of path to oracleInventory directory and installation group in your case - oinstall.
I never installed Oracle on AIX but I belive installation is (allmost) the same as on Linux or Solaris.

WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish

I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?

Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Post-Installation task client

Hi
I´ve a doubt with the post-installation tasks of the installation of the sap system. The default clients are 000,001 and 666.
In with client I´ve to realize this tasks?In the client 001 and after that I realize the client copy of the client 000. The changes are cross-client?
More thanks

Hi Ruben,
Please let us know which SAP Product and version you have installed. Because there are seperate set of post installation activities for each Product such as ECC, PI, EP, CRM,SRM etc.
For Ex: If you have installed a ECC system, most of the initial post installation activities such as STMS configuration, SGEN etc need to be done on client 000. This information is very well available in Post installation guides.
If you have installed a PI system, you need to carry most of the PI specific post installation activities in the java UME client i.e by default it is 001. But you can also perform the activities in any custom client by having a client copy and come configuration changes.
Cheers....,
Raghu

Urgent:Regarding the Pre-Installation Tasks

Similar Messages

Maybe you are looking for