URGENT Registration Key is not valid

I finally received a registration key, and when I cut and pasted it into the Oracle Universal Installer, I received an error saying invalid key. Please advise.

Can you let us know which product you are trying to install and the keylock number you're entering.
Thanks,
OTN

Similar Messages

I want activate my server 2012 R2, irror showing key is not valid

Dear Sir,
I want to activate my server 2012 R2 standard but when I put the activation key error showing key is not valid. then I talk to Microsoft customer care they told
me some error in your installation id, and key product key is ok. so please help me how to activate my server 2012 R2 standard. its urgent.
Thanks & Regards
Arjun Saini

have you installed the server using evluation edition.then you can convert it using dism.exe
please refer the below article
Converting existing Windows Server 2012 versions
At any time after installing Windows Server 2012, you can run Setup to repair the installation (sometimes called “repair in place”) or, in certain cases, to convert to a different edition.
You can run Setup to perform a “repair in place” on any edition of Windows Server 2012; the result will be the same edition you started with.
For Windows Server 2012 Standard, you can convert the system to Windows Server 2012 Datacenter as follows: From an elevated command prompt, determine the current edition name with the command
DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run
DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula, providing the edition ID and a retail product key. The server will restart twice.
For Windows Server 2012 Essentials, you can run Setup and convert it to Windows Server 2012 Standard by providing the appropriate retail license key.
From <http://technet.microsoft.com/en-us/library/jj574204.aspx>
Darshana Jayathilake

Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh Arya

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

I am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

i am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

Could be some Disk Corruption, but...
http://support.microsoft.com/kb/969064

New install of SQL 2014 Std MSDN. Get "The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging."

Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.

Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error When Adjust Width in Custom Table Headers "The width key is not valid"

I tried to custom headers for a table of MAC Addresses. I used the following expression and it worked fine.
Get-WmiObject win32_networkadapterconfiguration -Filter "DHCPEnabled=True" | Select-Object @{Expression={$_.DNSHostname};Name="Workstation"},@{Expression={$_.Description};Name="Adapter"}, @{Expression={$_.MACAddress};Name="MAC"}
When I tried to adjust the width of the columns by including that in the Custom Headers I got an error.
Get-WmiObject win32_networkadapterconfiguration -Filter "DHCPEnabled=True" | Select-Object @{Name="Workstation";width=25;Expression={$_.DNSHostname}},@{Name="Adapter";Expression={$_.Description}},@{Name="MAC";Expression={$_.MACAddress}}
Select-Object : The width key is not valid.
At line:1 char:78

You have a couple of useful options:
#1
Get-WmiObject win32_networkadapterconfiguration -Filter 'DHCPEnabled=True' |
Select-Object @{E={$_.DNSHostname};N="Workstation"},
@{E={$_.MACAddress};N="MAC"},
@{E={$_.Description};N="Adapter"} |
Format-Table -Auto
#2
Get-WmiObject win32_networkadapterconfiguration -Filter 'DHCPEnabled=True' |
Format-Table @{N="Workstation";W=25;E={$_.DNSHostname}},
@{N="MAC";W=18;E={$_.MACAddress}},
@{N="Adapter";E={$_.Description}}
¯\_(ツ)_/¯

UIBB key is not valid (Component FPM_LIST_UIBB, Config ID HRESS_CC_W4_US, Instance ID )

Hello All,
I want to add a column in overview screen for W4 tax service for USA. I have created a new custom component configuration by copyning HRESS_CC_W4_US.
And trying to assign this config in Z_HRESS_CC_W4_OVP_US. While doing so I get an error -
UIBB key is not valid (Component FPM_LIST_UIBB, Config ID HRESS_CC_W4_US, Instance ID )
Any thoughts?
Thanks,
Bhushan

Hi Bhushan,
Goto SE80 and select Webdynpro Component/Interface
and give FPM_LIST_UIBB, Press Enter.
Then Goto Webdynpro Configurations and Select HRESS_CC_W4_US -> Select 'Start Configurator'
It will open Browser where you can see the Other Functions button there select 'Create Enhancement'
and name it as Z_HRESS_CC_W4_US or what ever name you want starting with 'Z_'.
you need to save this in to your own Package name.
Then click on Change button and goto 'Configure Columns' and add your required Column and save it.
Regards,
Mohsin.

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal Reports 2011 Installation Issue, key code not valid

Folks,
We have just purchased two licenses for the Crystal 2011 upgrade from DigitalRiver. The installation completes successfully, using one of the two "digital rights" keys that were provided in the confirmation email from DigitalRiver.
Upon launching Crystal Reports 2011 for the first time, though, we are being prompted with a License Manager window asking to add a key code for Crystal Reports. We enter the "digital rights" key provided by DigitalRiver, the same one used during the installation [copy and pasted from the email for accuracy] and receive the error message "The key code you just typed is not valid, please try again."
Canceling this window or clicking Ok simply closes the Crystal Reports application.
Any assistance in how to get the application running would be helpful.
Tested Environments:
Windows 7 Professional SP1, 32bit
Visual Studio 2010 w/ CR for Visual Studio 2010 installed
Windows Server 2008 R2, 64bit
Thanks,
Jeff

Follow-up:
We went through several iterations of installation and finally decided to mix things up to see if we could get a different response from the software. The items that we performed differently were as follows:
1. Ran the setup.exe as administrator [even though we have full admin access as the logged in user]
2. Hand typed the digital rights key rather than cut/paste from the email
3. Performed a custom installation rather than the default and de-selected all of the SAP and other software integration options.
The software ran fine without prompting with the License Manager.
My guess is that it was the removal of the integration pieces that allowed the application to run. We'll perform our next install with just that change and see if it is the culprit.
Jeff

Integration Kit for SAP 90 Day Eval Key Code Not Valid

I downloaded the Integration Kit for SAP 90 Day Evaluation from this site:
https://boc.sdn.sap.com/node/18962
However, the Key Code listed on the web site is not Valid.

Hi Jim,
I called customer service of Business Object and they advice me to post the question in forum and some one from technical support team will answer. Any update from tech support team is apreciated.
Thank you.
Regards
Pushparaj.

My product key is not valid

my product key is not valid

double check that you're using the correct serial no. : http://helpx.adobe.com/x-productkb/global/find-serial-number.html
if you are certain you are, you may need to contact adobe support: http://www.adobe.com/support/chat/ivrchat.html
but first go through these steps, http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html

Registration key does not work

I purchased Quicktime Pro 7 and entered my reg. key in Quicktime Player. It does not change to Quicktime Pro. I checked my reg. key with Apple and it shows my original purchase and the same key. Am I missing something or do I need to remove Quicktime Player and download it again?

Click the "About QuickTime Player" menu option (under the QuickTime Player menu).
You should see a small "Pro" on the big blue QuickTime icon if your registration was properly entered.

Just recovered my dv5 and it says no serial number found and says product key is not valid

DV5-1045TX Vista 32bit Can anyone help.
Keeps asking me to avtivate my new product key or
buy one. This is a genuine HP DV5 laptop I have had for 4 years.

I use the recovery which is on my laptop. Also put my product number in that was on the bottom of my laptop but it still won't recognize it. Weird I have recovered it before a year ago and it was ok but all of a sudden it just won't recognize my windows that is why I recovered it again.

My key does not work/Invalid Registration

I have been trying for days to unlock Quick Time(QT) Pro, but my registration key does not work!!! I've done all possible requirements, I have copied and pasted my user name and the key code (so those are correct), I do the correct qualifications to run the software, I am using the QT control settings, and yes I do have QT 7.0.3. All my criterias meet to unlock QT Pro but I keep getting the message saying Invalid Registration. I've done all possible trouble shooting techniques given by Apple's tech support but I've simply have had no luck. To my understanding the key code has to be 5 sets of 4 numerical characters (20 characters long) but the one that I got from Apple is only 7 characters long. I've clicked on the link that retrieves a lost key but I get the same number. I try calling customer service but have had no luck in reaching a live operator. What do I do?

Yea you are right, I am inputting the part number. However, I keep looking for the 20 character long key but there is nothing there in either the confirmation email or the invoice email that they sent me. I check the "Download History" on the Apple Store website but it only gives me the name QT Pro, the part number and the date that I purchased it. There is no 20 character long key given. Could they have not given me the key by accident? Like I said, event when I go to the link to retrieve my lost key, it gives me the same part number! Please help, its been more than a week and I am getting frustrated!!!

Illustrator Serial key reported as not valid

Hi there,
while the installation ist running, i typed in my serial key.
The programm told me, ma key is not valid for this.
The Problem is, that i already used this key for installation of Photoshop extended successfully. The support chat clerk told me that my key is also valid for Adobe illustrator, but it´s not working yet.
Do you have any ideas?

Club,
you may try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or retry Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
or try Customer Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

URGENT Registration Key is not valid

Similar Messages

Maybe you are looking for