Urgent Rep - 0733 Error
HI guys,
I made a report on friday and today when I tried to open it , it gave me an error REP-0733. By reading the help,it tells that I am trying to create a program unit by the same name that already exists. The problem is that the report does not open up. It keeps giving the abovementioned error and then the report builder closes. I have tried converting the report but the same error comes while conversion. Rename, copy-paste etc. all the options are not working.
Please help me out with this .
Regards,
Vishal
Dear members,
(Reports 6i c/s)
I had the same problem: today, my report does not open.
The thing is, I'm sure I didn't create two program units with the same name in the same report.
BUT, I created a program unit by copying the code from another report (which was at that time open in the builder as well).
That means that I had two program units with the same name, but in two different reports. Did Reports mix it all up ?
Today, I did the same operation in an old copy of my report, and it worked fine.
But now, I'd like to find a way to open my bugged report anyway, since I have unsaved modifications in it (we had a backup problem the previous days as well).
Can anybody help ?
Similar Messages
-
Urgent:-REP-50152: Error while sending mail
hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanksYour smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.
-
Urgent -- REP - 1848 error , plz
We are running Reports 6i on Celeron 1.2 GHz with O/S Windows ME. The report is a character report. Though the report is executing & giving correct output on screen but while giving print command it is giving as error as
REP - 1848 ie... Failed while trying to begin printing.
One more character report is running sucessfully on same PC and Printer.
Although both the reports doesnt give any error on any other O/S (Win 98, Win 2000, Win XP).
Please provide necessary help.
Thanks in advance.
Regards
Rohit TanejaThanks ORACLE TEAM for the instance reply ....
But sorry to say the the same problem still exists.
I have checked the printer driver using the utility which u mentioned.
The test result shows
**** SUCCESSFUL: NO DRIVER ERRORS WERE FOUND ****
The whole output result is also attached below.
Again i wanna say, we r using REPORTS 6i There are two character reports both are giving result on Screen but while printing only one gets executed & gives output on paper but the second one is giving error REP - 1848 (Failed while trying to begin printing) only on O/S Windows ME version 4.90.3000.
The configuration of machine are Celeron 1.2GHz.
Thanks
Please Reply soon
Rohit Taneja
PS -- Drivertest.out file
*** driverTest Version 2.0
*** output file
Default Printer is Epson FX-2180
Test-1.) Getting printer's default settings from the driver
Orientation : PORTRAIT
Paper Size : 9
Current Paper Tray : 270
Print Quality : 120 dots per inch
Y Resolution : 72 dots per inch
True Type Option : 1
Test-2.) Trying to set the Printer properties to default
Note: No changes to the printer default setting should occur
**** Printer Drivers value's were identical. No Errors found ****
Test-3.) Getting the printer's paper information
Note: There must be at least one (1) paperid, papername, and papersize.
Valid paper count obtained = 26
Printer paper id count obtained successfully = 26
Printer paper names count obtained successfully = 26
Printer paper sizes count obtained successfully = 26
Test-4.) Trying to set different Paper size and reset device context
PaperSize Result of setting Paper Name
paperid
258 - Successful - Fanfold 210 x 305 mm
259 - Successful - A4 Fanfold 210 mm x 11 2/3 in
260 - Successful - Letter Fanfold 8.5 x 11 in
261 - Successful - Fanfold 11 x 8.5 in
40 - Successful - German standard fanfold 8 1/2 x 12 in
41 - Successful - German legal fanfold 8 1/2 x 13 in
262 - Successful - Fanfold 358 x 305 mm
39 - Successful - US standard fanfold 14 7/8 x 11 in
1 - Successful - Letter 8 1/2 x 11 in
5 - Successful - Legal 8 1/2 x 14 in
3 - Successful - Tabloid 11 x 17 in
66 - Successful - A2 420 x 594 mm
8 - Successful - A3 297 x 420 mm
263 - Successful - A3 Rotated 420 x 297 mm
9 - Successful - A4 210 x 297 mm
264 - Successful - A4 Rotated 297 x 210 mm
11 - Successful - A5 148 x 210 mm
12 - Successful - B4 (JIS) 257 x 364 mm
13 - Successful - B5 (JIS) 182 x 257 mm
6 - Successful - Statement 5 1/2 x 8 1/2 in
265 - Successful - 6 3/4 Envelope 6 1/2 x 3 5/8 in
266 - Successful - Envelope #10 9 1/2 x 4 1/8 in
267 - Successful - Envelope DL 220 x 110 mm
268 - Successful - Envelope C5 229 x 162 mm
269 - Successful - Card 148 x 105 mm
256 - Successful - User-defined size
Test-5.) Getting the printer's paper information again
Valid paper count obtained = 26
Printer paper id count obtained successfully = 26
Printer paper names count obtained successfully = 26
Printer paper sizes count obtained successfully = 26
Test-6.) Getting the Printer supported bin/tray information
Note: There must be at least one (1) bin id and bin name.
Valid bin count obtained = 4
Printer Bin id count obtained successfully = 4
Printer Bin Name count obtained successfully = 4
Test-7.) Checking to see if Current Paper Tray(Bin)
a tray in the list of Trays and paper size in the list of papers
reported by the driver.
Current Paper Tray(Devmode's dmDefaultSource) value = 270
Scanning bin list for a matching id...
++++ MATCH FOUND ON BIN ID[0] = 270 -- name = Manual Feed ++++
BIN INFORMATION:
* bincount = 4
* bin ID[0] is 270
* bin name[0] is Manual Feed
* bin ID[1] is 271
* bin name[1] is Sheet Feeder - Bin1
* bin ID[2] is 272
* bin name[2] is Sheet Feeder - Bin2
* bin ID[3] is 273
* bin name[3] is Tractor
Test-8.) Checking to see if Current Paper Size/Name ID matches
a tray in the list of Trays and paper size in the list of papers
reported by the driver.
Current Paper Size/Name ID(Devmode's dmPaperSize) value = 9
Scanning paper list for a matching id...
++++ MATCH FOUND ON PAPER ID[14] = 9 -- name = A4 210 x 297 mm ++++
PAPER INFORMATION: (Note: sizes reported are in tenths of a millimeter)
* Paper count = 26
* paper ID[0] is 258
* paper name[0] is Fanfold 210 x 305 mm
* paper size[0] width= 2100, height= 3048
* paper ID[1] is 259
* paper name[1] is A4 Fanfold 210 mm x 11 2/3 in
* paper size[1] width= 2100, height= 2963
* paper ID[2] is 260
* paper name[2] is Letter Fanfold 8.5 x 11 in
* paper size[2] width= 2159, height= 2794
* paper ID[3] is 261
* paper name[3] is Fanfold 11 x 8.5 in
* paper size[3] width= 2794, height= 2159
* paper ID[4] is 40
* paper name[4] is German standard fanfold 8 1/2 x 12 in
* paper size[4] width= 2159, height= 3048
* paper ID[5] is 41
* paper name[5] is German legal fanfold 8 1/2 x 13 in
* paper size[5] width= 2159, height= 3302
* paper ID[6] is 262
* paper name[6] is Fanfold 358 x 305 mm
* paper size[6] width= 3580, height= 3048
* paper ID[7] is 39
* paper name[7] is US standard fanfold 14 7/8 x 11 in
* paper size[7] width= 3780, height= 2794
* paper ID[8] is 1
* paper name[8] is Letter 8 1/2 x 11 in
* paper size[8] width= 2159, height= 2794
* paper ID[9] is 5
* paper name[9] is Legal 8 1/2 x 14 in
* paper size[9] width= 2159, height= 3556
* paper ID[10] is 3
* paper name[10] is Tabloid 11 x 17 in
* paper size[10] width= 2794, height= 4318
* paper ID[11] is 66
* paper name[11] is A2 420 x 594 mm
* paper size[11] width= 4201, height= 5941
* paper ID[12] is 8
* paper name[12] is A3 297 x 420 mm
* paper size[12] width= 2969, height= 4201
* paper ID[13] is 263
* paper name[13] is A3 Rotated 420 x 297 mm
* paper size[13] width= 4200, height= 2969
* paper ID[14] is 9
* paper name[14] is A4 210 x 297 mm
* paper size[14] width= 2100, height= 2969
* paper ID[15] is 264
* paper name[15] is A4 Rotated 297 x 210 mm
* paper size[15] width= 2970, height= 2100
* paper ID[16] is 11
* paper name[16] is A5 148 x 210 mm
* paper size[16] width= 1481, height= 2101
* paper ID[17] is 12
* paper name[17] is B4 (JIS) 257 x 364 mm
* paper size[17] width= 2570, height= 3640
* paper ID[18] is 13
* paper name[18] is B5 (JIS) 182 x 257 mm
* paper size[18] width= 1821, height= 2571
* paper ID[19] is 6
* paper name[19] is Statement 5 1/2 x 8 1/2 in
* paper size[19] width= 1397, height= 2159
* paper ID[20] is 265
* paper name[20] is 6 3/4 Envelope 6 1/2 x 3 5/8 in
* paper size[20] width= 1651, height= 919
* paper ID[21] is 266
* paper name[21] is Envelope #10 9 1/2 x 4 1/8 in
* paper size[21] width= 2413, height= 1047
* paper ID[22] is 267
* paper name[22] is Envelope DL 220 x 110 mm
* paper size[22] width= 2200, height= 1099
* paper ID[23] is 268
* paper name[23] is Envelope C5 229 x 162 mm
* paper size[23] width= 2290, height= 1620
* paper ID[24] is 269
* paper name[24] is Card 148 x 105 mm
* paper size[24] width= 1480, height= 1050
* paper ID[25] is 256
* paper name[25] is User-defined size
* paper size[25] width= 1016, height= 914
**** SUCCESSFUL: NO DRIVER ERRORS WERE FOUND **** -
REP-51018 + REP-50004 Errors (Urgent)
Hello,
I am working under Oracle 9i iDS on Windows XP Pro.
When I invoke my WebReports from WebForms, I see my Parameter Form that Pops-Up in a new Browser window.
When I hit, the "Submit Query" button, I am prompted to enter the username/password/database information.
I also get a message like:
REP-51018: Need Database User Authentication
I enter the required parameters even though they are already defined by the application code. Then I get an error like:
REP-50004: No Report specified on the command line.
1) Why do I get these errors ?
When I relauch my WebReport from WebForms, it works fine and I can get a WebReports from the WebForms.
2) What is going on ?
PT
PS: I created a generic function called RUN_REPORT_OBJECT_PROC that uses the run_report_object() and web.Show_document built-ins as indicated in:
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf
PS2: I increased the SESSIONS parameter in the init.ora file and set its value to 9999, but still cannot resolve the issue.
PS3: I get the same REP-51018 error under Forms/Report Services 10g on my Linux box.Hello,
I used the generic RUN_REPORT_OBJECT_PROC presented in the white paper. The generic procedure makes calls to the run_report_object and the web.show_document built-ins.
The only modification that I have done to this generic function is to add the SYNCHRONIZE keyword before the call to web.show_document built in as was suggested by a technical note on Metalink.
The RUN_REPORT_OBJECT_PROC also makes a call to the ENCODE function which I have also added.
In addition in my WebReports, I added the 3 user parameters: P_ACTIONS, P_SERVER_NAME and P_USER_CONNECT as well as added code to the BeforePForm trigger as indicated in the white paper.
All very straight forward stuff.
On Oracle 9i iDS running under Windows XP Pro, I can generate the Parameter Form then get the REP-51018 followed by the REP-50004 errors when pressing the "Submit" button. If I come back and press the "Reset" button on my Parameter form, I can generate the corresponding WebReport without errors.
These errors occur only the first time that I try to call a WebReport using a Parameter Form from a WebForm.
On the Forms/Reports 10g running on my LinuxServer under iAS, the right hand side Fields for my Parameter Form Parameters are missing, for parameters of type Character + I cannot call-up my WebReports.
YOur feedback is appreciated......
PT
PS: I tried to make modifications to the rwservlet.conf and the repsrv.conf and the rep_Linux2005.conf files without success. -
URGENT!!!: REP-51002 ERROR with local installation without network
Hi,
we have a problem with the Oracle Reports Services (10.1.2). We get an REP-51002-Error (Bindung an Reports Server nb-gta nicht möglich).
We have a development environment where all works fine. For presentation purpose we installed the ReportsServices on a laptop. The strange thing:
When we have inserted a network cable to the laptop, all works fine. when we replace the cable, we get the REP-51002-error.
Seems that the ReportServer has a problem when no network card is present (ipconfig shows no network card or IP-Adress when the cable is replaced).
We also tried to modify the SERVER-Variable in the rwservlet.properties (set to localhost and 127.0.0.1), but with no success.
TraceFile of ReportServer reports a "NoRouteToHost"-Exception.
Thanks for help in advance!
Greetings,
ClausIf the host machine is not in a network, then try this (for Windows platform):
Install the MS loopback adapter, as described on the Miscrosoft Web site (http:\\microsoft.support.com). Then, specify an IP address for your machine (either XP or Windows 2000), as follows:
1. On your desktop, rightclick My Network Places, and select Properties.
2. Rightclick the MS loopback adapter, and select Properties.
3. In the Properties dialog box, select Internet Protocol (TCP/IP), and then click on Properties.
4. Select Use the following IP address, and enter a valid IP address. The subnet mask field will automatically populate. Do not use the local host IP (that is, 127.0.0.1). For example, enter: 198.162.1.1.
5. Click OK, and follow the instructions displayed.
Another option is to use naming services, as mentioned in pdevaal's reply.
Message was edited by:
mdey -
Hi, When I running report on Oracle 9iAs Rel2, I Receive REP-3000 error.
My Platform Info. : Linux Advanced server 2.1
I can run xclock on my linux box;
I Set NLS_Lang="SIMLIFIED CHINESE_CHINA.ZHS16GBK" in reports.sh
when I comment the NLS_LANG=.... in my reports.sh, I have not receive this error msg, But I can not see any chinese character, I only can see "????"
How to solve this problem?
Thank you very much !My Platform Info. : Linux Advanced server 2.1I assume you mean Red Hat Linux Advance Server 2.1. There are too many Linuxes out there, so it's hard to tell without the vendor name.
I can run xclock on my linux box;Why does running xclock successfully always have to be the test? :-))
(Don't take me seriously, for I have no better suggestions)
I Set NLS_Lang="SIMLIFIED CHINESE_CHINA.ZHS16GBK" in
reports.sh
when I comment the NLS_LANG=.... in my reports.sh, I
have not receive this error msg, But I can not see
any chinese character, I only can see "????"I've noticed a few problems with NLS_LANG and rwservlet. Can you explain how you're running the report. What is the input, and whether you're using rwclient, rwservlet, rwrun, etc.? Also, if you could post the relevant portion of the server and engine trace files (<server></server>.trc and <server></server>-rwEng-0.trc).
-Manish -
Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.
Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
nullIt sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling -
REP-770 Error while executing the report.
Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
ArunaHi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet. -
Reports Builder Error - REP 1070 Error while opening or saving document
Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
AnandHi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared. -
REP-3002: Error initializing printer
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null -
Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error
I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS. -
Reports: REP-0177 & REP-3000 errors :-( (RH 6.2.2 HA 1.0)
Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
nullhello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team -
REP-0081 error when emailing report output
I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
REP-0081: Error during file I/O operation.
REP-0110: Unable to open file 'mpa02448.pdf'.
scaba 14
Execution Mode = Batch
Report Destination = Mail
Report Destination Name = [email protected]
Report Destination Format = PDF
I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
Any ideas?I have verified the latest patches.
Addresses are indeed in Windows address book.
As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise. -
I want to transfore forms date directly to report. then i use run_report_object function. But in forms i use datetime type replace of default date type. then the item can show time. then i revoke the report.rep-1340 error get. Who have better solution. thanks a lot.
Hi ...
pass thedate by a parameter list
but transform the date into char
with to_chat(the_date,format)
in report's query you will may do like this:
select ..... where query_date = to_date(the_parameter,format);
the formats must be the same.
Good look !
Ovidiu ANCUTA
[email protected] -
Hi all,
We are converting Reports6i to Reports10g (Report Builder 10.1.2.0.2)
All those reports which are opened in Reports 10g and compiled and tried to run in web layout , either report is coming as blank or it shows Rep:56092 error :class not found for destination type screen
How can i solve this problem ?
Thanks in advanceBut Manu the default value in destype is Screen even if i create a fresh report..
Also if i create report from scratch, then no issue is there..
But there are hundreds of reports in 6i. How can i develop all those from scratch?
Is there any solution for this?
Edited by: Dora on Jan 5, 2010 4:22 PM
Maybe you are looking for
-
Selecting more than one photo to print at a time
Im using a Dell laptop, 2GB, Windows XP PROF, Epson Stylus Photo RX620. How can I select more than one photo to print without having to print one at a time when I select photos from a folder?
-
I was 3-4 updates behind on ipad. Did back-up, installed update to ipad now how do I get my purchased apps back on my ipad? I assume they didn't back up to cloud since that came with this update. I can see all my purchased apps but no way to transfer
-
"Some of the videos in your itunes library.....
including the video "example", were not copied to the ipod "blank's ipod" because they cannot be played on this ipod" These files im trying to add are mp4. I got this awhile ago, but I'm not sure how to fix it. Any ideas?
-
License dont show in Business One
Hi All A consultant is having an issue with a new client. He requested their license file and it imports successfully. However when he goes to the license administration, the licenses dont show in sap business one. He seen that the localization is no
-
How can i save my attachment in email
how can i save my email attachment which is a pdf file and view it later?