Urgent reply needed..one hour to go

Hi, I want to buy a processor from ebay. the auction finishes in an hour I have been high bidder for a week but now am not sure if this processor is compatable, a one word answer will do as long as its prompt.
Will a 800Mhz g4 from a Quicksilver fit my 400mhz 100mhz bus G4 AGP Graphics?
Thanks in advance.

Also the board would require certain modifications to the ATA connector on the MLB to fit properly.
New World ROM desktop Mac generations ( highly similar and compatable hardware )
1G: B&W G3, PCI graphics G4 ( daughter card Firewire, ZIF CPU socket )
2G: AGP graphics (sawtooth) G4, Gigabit Ethernet G4 ( MLB Firewire, CPU duaghter cards PPC 7400/7410 )
3G: Digital Audio G4, Quicksilver G4 ( 133MHz bus, Advanced PPC 7450/7451/7455 processors )
4G: Mirror Drive Doors G4, Firewire 800 G4 ( based on xServe G4 design, 167 MHz bus on some models )
5G: Powermac G5's ( PPC 970 processors, fast FSB )
6G: Mac Pro ( intel processors, SATA II, )

Similar Messages

Compatibility of Weblogic 6.1 Oracle Thin Driver for Oracle 9i. - URGENT Reply Needed..Thanks.

Hi, We are using Weblogic 6.1. We are currently using JDBC Oracle Thin Driver (ClassName
: oracle.jdbc.driver.OracleDriver) that is built into Weblogic 6.1 (weblogic.jar).
Our database is Oracle 8.1.7.4. We want to upgrade to Oracle 9i (Oracle version
9.2.0.4). I would like to know the compatibility of this built-in Driver for Weblogic
6.1 with Oracle 9i (9.2.0.4) and can I continue to use the same JDBC driver. Also
we have plans to upgrade our Weblogics to 8.1 version. Can we continue to use
the same Oracle Thin driver that comes as part of WLS 8.1, for Oracle 9.2.0.4.
I need this reply ASAP. I appreciate any help in this regard.
Thanks, Venkatesan.

Thank you very much for your reply.
Joe Weinstein <[email protected]> wrote:
Hi. The driver we shipped will still work with the later DBMS, but there
have been many improvements and fixes to Oracle's dirver since then,
so I highly recommend that you download Oracle's latest appropriate
thin driver, and make sure it gets into the -classpath argument that
the weblogic startup script creates for the server.
Every release of weblogic will tend to include the latest oracle
thin driver available at the time, so the 8.1 will contain a newer one
than
the 6.1.
Joe
Venkatesan wrote:
Hi, We are using Weblogic 6.1. We are currently using JDBC Oracle ThinDriver (ClassName
: oracle.jdbc.driver.OracleDriver) that is built into Weblogic 6.1(weblogic.jar).
Our database is Oracle 8.1.7.4. We want to upgrade to Oracle 9i (Oracleversion
9.2.0.4). I would like to know the compatibility of this built-in Driverfor Weblogic
6.1 with Oracle 9i (9.2.0.4) and can I continue to use the same JDBCdriver. Also
we have plans to upgrade our Weblogics to 8.1 version. Can we continueto use
the same Oracle Thin driver that comes as part of WLS 8.1, for Oracle9.2.0.4.
I need this reply ASAP. I appreciate any help in this regard.
Thanks, Venkatesan.

Congiguring jsps with oracle8i,urgent reply needed

Beginner for oracle8i ---need ur help
I have installed oracle8i database server8.1.5 on winNT workstation which has Jserver to run java components.
Please tell me how to run jsps with oracle8i.
Ihave written certain jsp files but don't know where to put them and how to start the server to test them.This is an urgent requirement for my client,if anybody can help.
A great thanks in advance.
null

Do you refer to the 9i AS Metadata Repository / iasdb?
then,
1) yes, if mid-tier components (like Reports) metadata is stored there
2) do you consider your apps important?
Also note that Infra. and Mid-tier installs should be backed up sync'd (both at same time). There is a paper on OTN about this.

WriteToFile(doc DOMDocument,File varchar2) error-Urgent reply needed

The problem description in our environment:-
A xmldom package in the oracle 8.1.7 is trying to create an xml file from a DOMdocument. We are creating this DOMdocument by using an xmlparser. The input to the xmlparser is a file on the unix space.We are able to read the values ,display them. The error happens when the writeToFile method is used to update the xml file after changing the node values in the dom document. The environment seems to be okay or is there any problem with it.
To check our logic, a sample code from the web page http://www.akadia.com/services/ora_gen_xml.html was run.It gave the same error description(ORA-20000).It had also used the same function and the error occured at the same line number.The code from the web page reads as:-
DECLARE
doc sys.xmldom.DOMDocument;
main_node sys.xmldom.DOMNode;
root_node sys.xmldom.DOMNode;
user_node sys.xmldom.DOMNode;
item_node sys.xmldom.DOMNode;
root_elmt sys.xmldom.DOMElement;
item_elmt sys.xmldom.DOMElement;
item_text sys.xmldom.DOMText;
CURSOR get_users(p_deptno NUMBER) IS
SELECT empno
, ename
, deptno
, rownum
FROM emp
WHERE deptno = p_deptno;
BEGIN
doc := sys.xmldom.newDOMDocument;
main_node := sys.xmldom.makeNode(doc);
root_elmt := sys.xmldom.createElement(
doc
, 'EMPSET'
root_node := sys.xmldom.appendChild(
main_node
, sys.xmldom.makeNode(root_elmt)
FOR get_users_rec IN get_users(10) LOOP
item_elmt := sys.xmldom.createElement(
doc
, 'EMP'
sys.xmldom.setAttribute(
item_elmt
, 'num'
, get_users_rec.rownum
user_node := sys.xmldom.appendChild(
root_node
, sys.xmldom.makeNode(item_elmt)
item_elmt := sys.xmldom.createElement(
doc
, 'EMP_NO'
item_node := sys.xmldom.appendChild(
user_node
, sys.xmldom.makeNode(item_elmt)
item_text := sys.xmldom.createTextNode(
doc
, get_users_rec.empno
item_node := sys.xmldom.appendChild(
item_node
, sys.xmldom.makeNode(item_text)
END LOOP;
sys.xmldom.writeToFile(doc , '/user/sb8066\docSample.xml');
sys.xmldom.freeDocument(doc);
END;
The table emp was created with values in it.
Oracle error code:-
ORA-20000: An internal error has occurred: Permission denied
ORA-06512: at "SYS.XMLDOM", line 37
ORA-06512: at "SYS.XMLDOM", line 1784
ORA-06512: at line 61
The priveleges that were required for the above code were:-
GRANT javauserpriv to scott;
GRANT javasyspriv to scott;
GRANT EXECUTE ON xmldom TO scott;
These were also existing for our code and database user.NO clue is there about any possible environmental setting errors.
This code was trying to do the same job that we did but created a document object and not used an existing document object(from a parsing operation).Please advice about possible solutions.It is urgent.
with Regards
gopal

Hai kevin
I tried both of what you have said .I had also some suggestions from an oracle dba.Can you please help me any idea you have about it.It's regarding the encoding of the xml file.The suggestion was:-I have enclosed the my try for the first solution he suggested.
"ora-2000 is a very generic error ( mostly with intermedia/text/context/apps)
but may occur in regular stuff tooo..
in MOST OF CASES, it does not have any INDIVIDUAL IMPORTANCE at all.
its is resultant of ANOTHER ERROR.
in your case it is
ORA-06512 which is numeric or value error.
somedata is not GOOOD or unwanted character in unwanted place.
so these would be my LOOKOUTS (though, it may not relevent, as my knowledge on XML is very less.
I DONT DO ANY DEVELOPMENT at all. But just support lots n lots n lotsa developers).
1. as per your posting,
> > > sys.xmldom.writeToFile(doc ,
--->-- > > > '/user/temp\docSample.xml');
> > > sys.xmldom.freeDocument(doc);
in general terms, this would be wierd naming(line 2).
for unix '/user/temp/docsample' should do
(beware of file system permissions and case sensitivity in UNIX)
for windows '\usr\temp\docsample' should be used.
except IF U ARE USING UNC / MAPPED DRIVES ( THERE IS A SPECIAL CONSIDERATION
TO USE directory/direcotry\filname..THAT IS DIFFERENT CASE).
check this ( this may lead to error PERMISSION DENIED ( the clasical words from UNIX)
2. to deal with ora-6512, this may posssibly be th reason.
The default character set for XML is UTF8 - special characters indicated would
have an ASCII value > 127. Any character with an ASCII value > 128 is
interpreted as being the leading byte of a multi-byte character in UTF8.
To get around this you need to explicitly specify the character set you are
using. For example:
<?xml version="1.0" encoding="ISO-8859-1" ?>
This tells the XML parser to read the file as ISO-8859-1. If you are using
another character set, substitute the ISO name of the character set in this
line."
Kamal , i tried giving the '/' slash instead of '\' .The oracle reported a error,description as follows.
63 sys.xmldom.writeToFile(doc , '/user/temp/docSample.xml',sys.xmldom.getCharset(doc));
64 sys.xmldom.freeDocument(doc);
65 END;
66 /
UTF8
DECLARE
ERROR at line 1:
ORA-20000: An internal error has occurred: No such file or directory
ORA-06512: at "SYS.XMLDOM", line 37
ORA-06512: at "SYS.XMLDOM", line 1826
ORA-06512: at line 63
It reported error and when i revert back to the previously used slash,it had the old error.You must have read the dba's suggestions.Do you know about how to go about this.Anyway thaks for the help.Will be waiting for your advice.
The UTF8 ouput you must be seeing is the document's charset after me setting it,previously i tried to get the default value after parsing ,it had the same report.
regards
gopal

[IN] and [OUT] log messages coding [ URGENT REPLY NEEDED ]

currently doing struts project in eclipse by generated code by hibernate
and i want every method having facility for log
IN and OUT log facility
so could u please give me code that thing
like : log.debug("[IN] MyClass::myMethod() );
log.debug("[OUT] MyClass::myMethod() );
so is it right or wrong, please anyone know quick reply me i need URGENT

Don't double post.
http://forum.java.sun.com/thread.jspa?threadID=712601&tstart=0

Urgent Reply Needed

I wanted to know does dv6t quad edition has a built in mic???? and what is frequency or fsb of 4GB ddr3 memory or RAM provided in dv6t quad edition??
Pls rply by today...
Thanks in Advance

ok that makes sense but the pics are all different sizes, so if you told the ap to make all pics near 720x480, cropping or distortion would occur.
instead, I put an ocean scene in the background, soften up the edges of the pics on top, this way, they can be larger or smaller bu they all look like they have the ocean background - unless they fit the canvas.
-- ok I just got an error message saying that one of my pics is open and being used in another application - but I have nothing else open.
the render stopped.
whats up with that?
Message was edited by: M-323

URGENT Reply Needed: 9iAS Rel2 and Database

I have been asked about the 9i Database installation usuage with the 9iAS. We run Forms/Reports with the application server.
1) Does the database need to be up and running while the mid-tier is running and to be used?
2) Does the database need to be archived/logging?

Do you refer to the 9i AS Metadata Repository / iasdb?
then,
1) yes, if mid-tier components (like Reports) metadata is stored there
2) do you consider your apps important?
Also note that Infra. and Mid-tier installs should be backed up sync'd (both at same time). There is a paper on OTN about this.

Blackberry App World (URGENT REPLY NEEDED)

Hello all.
I just recently got my blackberry, and have been trying to create my Blackberry ID. But every time I try a password, it says the password is not permitted-even though it was stated that the password was either 'stong' or 'good' I've tried almost 20 different passwords, at this point I'm really frustrated. Any advice?

Can you register from a PC?
http://us.blackberry.com/bbid.html
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

We have 30 ipads at our school and it is great. We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.) I teach music and are using Garageband. I need to find away were my students that

We have 30 ipads at our school and it is great. We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.)
I teach music and are using Garageband. I need to find away were my students that are working on a project can export the files and save them somewhere, so when they 7 days later open Garage band can import there song with all the correct midi-tracks. When I export the song to Icloud the song become an Mp4 file (I think). And I can import the files via Icloude.
This is because too many times the song has been sabotages during the week
Dan Sweden

Dan,
your students could store their projects in iCloud, only you would continously have to change the AppleIDs of the iPads, so each student could store the songs with their own AppleID. I don't think this will be feasable.
The other possibility would be to share the projects to iTunes and to download them to iTunes on a Mac at the end of each lesson. Does your school have Macs? This will not work with PCs.
See this link: GarageBand for iPad: Get answers fast http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
Look at the section "Share GarageBand songs",
Send a GarageBand song to iTunes:
-- Léonie

Hi I need one urgent help from anyone

Hi,
I am looking some SAP HR ABAP objects its very urgent i need to give resume to one of the employer. The object may some what related to this requirement .Or send any HR ABAP Object its very urgent guys.....
Rewards will sure..........
(automate an interface between one of clients telecommunications providers and R/3, parsing incoming data in a UNIX format to create FI/CO postings and reports out of R/3.)
Thanks and Regards
Ramesh

Hi Rohit,
CUCM releasing the call because it's unable to find the called number received i.e. called number does not exist in dial-plan.
Check below points:-
1). Check the CSS on the SIP trunk in CUCM (may be called number is not accessible due to incorrect CSS).
2). Check the translation pattern and it's CSS.
3). If you are not using translation pattern then check for the translation profile in router config. In this case you can check and share your running-config and debug voice dial-peer or debug voice ccapi inout.
Regards,
Nishant Savalia

Using unicode in sms sending :)plz. urgent reply is needed.

when i want to send a sms of string of unicode. is it necessary to encode it in UTF8 or UTF16 ???
when i encode it then the length of the string comes larger.
can i send sms as a string of unicode without changing its length????
like this:
String str="\u270F";
// now str's length is 1
str = new String(str.getBytes("UTF16"));
//now str's length is 4!!!!!!!!
plz. urgent reply is needed.
best regards
tanvir

By default SMS has it's own text encoding and therefore you cannot use UTF8 nor UTF16. There is a special UCS2 encoding, alowing for 70 unicode characters to be send (per sms). See: http://www.dreamfabric.com/sms/

I need one recurcive(unended loop) pl/sql example, its very urgent pls

Hi,
I need one recurcive (unended loop) pl/sql example, its very urgent pls
Thanks,
Sathis.

I suppose you'll want to know how to get out of your undended loop too (although that does stop it being unended).
Example...
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2    v_cnt NUMBER := 0;
3 BEGIN
4    LOOP
5      EXIT WHEN v_cnt = 1000;
6      v_cnt := v_cnt + 1;
7    END LOOP;
8* END;
SQL> /
PL/SQL procedure successfully completed.
SQL>

HT1446 hello everyone my macbookpro run only about one houre then gie alarm that it need charging ,can i replace it during the one year warranty

hello everyone my macbookpro runtime decreased suddenly to about one hour after full charging ,how can i deal with this problem?

you have a one year warranty. You can purchase an extended warranty called "AppleCare" that will make the warranty 3 years, but you need to purchase it before the mac turns one year old. Alsoyou do not need a paper, the serial # determines the age of the mac.

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

Urgent reply needed..one hour to go

Similar Messages

Maybe you are looking for