Urgent Request: Unable to view staves in score window

Hi, sorry this is a very newbie question, but I can't for the life of me figure out how to get the staves to show up in the score window. I want to be able to manually type notes in but no staves show up until I actually hit record and play on the keyboard. I'm still quite new to Logic and coming from Cakewalk Sonar. I have to have a piece done very soon and any help would be greatly appreciated.
Thanks,
Kyle

Use the pencil tool to create an empty MIDI region on a suitable track in the Arrange window. Drag the right-hand edge to size it to approximately the length of the music you intend to enter. Then, with your new (empty) region selected, open a linked Score window.

Similar Messages

  • Unable to view .wmf thumbnail pictures - Windows 8

    Hello,
    I am unable to view the thumbnail pictures of a Microsoft clipart image on my computer.  I have had this problem before and I can't remember where I found a quick little patch/download to fix this problem.
    Does any one know how to fix this problem or know where the patch is?   I have Windows 8.
    Thank you.

    The IE app does not allow most plugins so it cannot run silverlight, you will need to keep using the desktop version.

  • TS4403 unable to view photo stream in windows

    I am unable to view my photostream on my pc.  I keep getting an error that iphotostream stopped working do I wish to debug or cancel I'm not sure how to fix this. It also says that photostream is not enabled in the windows folder, but it has been enabled in the icloud control panel. Thanks.

    You first need to go into the System/iCloud preference pane and activate PhotoStream:
    Then you'll be able to activate it in iPhoto.
    OT

  • Unable to view Field Explorer

    In Crystal Reports 2008, I've been working with a client who is unable to view the Field Explorer window to edit her report.  When you select the View menu and Field Explorer, nothing happens.  We can verify the database and are connected to our table fine, but can't seem to access the Field Explorer for editing.  The only work-around is to use a wizard to create reports, but it's very time-consuming trying to make changes and edit that way.  Has anyone seen this before?  We don't have access to the setup files to try reinstalling, but we can track them down if that's the best starting point.  I just thought it was odd and wondered if there was an easy fix.  Thanks

    click on View | Toolbars and in the pop up window, check the box next to Reset all toolbars and explorers on next restart.
    Restart CR 2008 and see if the field explorer displays.

  • HT3702 I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base co

    I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
    Kevin

    I don't know what you are saying. How do I get my money refunded.

  • Unable to view complete Application Component Hierarchy.( Its Urgent)

    Hi,
      While creating Datasources with RSO2, I am selecting Application components, In the Application Component Hierarchy, I am unable to view the complete Hierarchy, ie subtrees are not available .
        Say Under PA-> PA-PA-IO is visible . ie All  subtrees are missing  under this application component, Including transaction data sources  under PA   and also Master Datasources  under PA-PA-IO. Like this all subtrees under  each application components are not visible.
        I have checked the Datasources delivered by SAP ie using RSA5 . Here all Application components are available including subtrees.
      I  have tried with RSA9 tried to transfer the Application component hierarchy but invain.
      Please help me in this regard. Its very Urgent.
    Thanks,
    Jaswantha

    You can rename your <JDev_Home>\jdev\system to <JDev_Home>\jdev\system_backup, f.ex.
    But it means you will lose your preferences, DB connections, ...
    Regards,
    Didier.

  • Urgent:Unable to view the root organisational unit created in the PPOCE

    Hi Experts,
    I have created a root organisational unit using the Tcode PPOCE.But I am unable to view the same in the selection area  using the Structure search.It is appearing in the search term area but not in structure search.
    Please help it is very urgent
    Thanks in advance
    Rajeev Chhabra

    Try Clicking on 'Unrelated Objects' in the PPOCE screen. It should show your root org unit. I think you have just created the root org unit without the complete structure.
    Regards
    Lincoln

  • Unable to view Behance - Oops! There was a problem with your request

    Hi,
    Today, I am unable to view Behance and I'm unable to log in as well.
    Received the error message - Oops! There was a problem with your request.
    Please refresh the page to try again.
    Contact support if the problem persists.
    Does anyone has the same problem, Anyone knows how to resolve this?

    Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
    Behance Support & Forum : Submit a request for assistance

  • Unable to view oppurtunities at customer level issue urgent plzzzzz

    Hi team,
    Please hlp me ,we are unable to view the opportunities created on a customer...
    Navigation>after creating a oppurtunity..
    1)Clicking on the customer tab to search the customer,once the details appears we can able see oppurtunity tab on left side,when we click on the oppurtunity tab it should display all
    the oppurtunities created on the customer.But at present it is not showing any oppurtunities..please hlp me...
    Thanks in Advance...
    Regards,
    Rajasekhar.

    Hi JoshM,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Unable to view images in the crystal reports on a jsp

    Hi folks,
    I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
    If anyone of you know how to fix it. Kindly post it. It's urgent.
    PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

    Hi Suresh,
    Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
    Add an entry in web.xml as follows ( if it doesn't exist)
    <context-param>
      <param-name>crystal_image_uri</param-name>
      <param-value>/<your application name>/crystalreportviewers115</param-value>
    </context-param>
    crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
    -Aasavari

  • Unable to view output from concurrent manager

    Hello all,
    I am unable to view output from concurrent manager, I am using IE 8 32bit on Windows 7 & adobe 10.0.1
    It gives a blank page
    We are trying to view an xml report
    EBS 11.5.10.2
    db : 10.2.0.
    linux 4 update 5
    I have already reffered below documents but for no luck
    Note: 888932.1 - R12.1 Unable To View Output For Xml Outputs - View Output Button - The window opens up And Disappear Automatically
    Note: 305850.1 - Unable To View Output Of PDF Report When Clicking ''View Output''
    Thanks.

    Is the issue with XML/PDF concurrent requests or with all requests?
    Can you find any errors in Apache/Database log files?
    Is the application listener up and running? Can you find any errors in the listener log file?
    Have you tried to run AutoConfig and bounce the services and see if this helps?
    Thanks,
    Hussein

  • Unable to View output in .rtf format

    Hi guys,
    I am new to BI publisher.
    I want to view the output in .rtf format
    When click on view output I am getting an error "Unable to find the published output for this request" and then "No output file exists for request xxxxxxxx"
    Do we need to apply any patch on the applications side in order to resolve this
    I am able the output in .pdf format on the serverside
    I am unable to view it in .rft or excel format
    Any suggestions

    Is the issue with XML/PDF concurrent requests or with all requests?
    Can you find any errors in Apache/Database log files?
    Is the application listener up and running? Can you find any errors in the listener log file?
    Have you tried to run AutoConfig and bounce the services and see if this helps?
    Thanks,
    Hussein

  • Unable to view (most) man pages

    ... really aggravating:
    I've recently completed a Solaris 8 install (Sparc). I've also installed some software from the "companion" cd (in /opt/sfw). I have gobs of man page files in several locations, but I am unable to view most of them. I've tried entering various "man" incantations on a command line, and double-clicking on man page files in the file manager window. Nothing works - from the cmd line for example:
    # man -s 1 zip
    "Reformatting page. Please wait... done"
    or, in File Manager:
    Double-click a man file (e.g. zip.1) in File Manager gets this message: "Man page could not be formatted. THe requested Man Page is either not present, or corrupt."
    However, there are a few files (in /opt/sfw/man) that, when double-clicked in FIle Manager (or man'd fm the command line) will display.
    I've searched the FAQs 'til my eyes are bleeding, but have found no answers. Can someone tell me WTFIGO?
    Thanks!

    You may want to pkginfo -l SUNWman to see if your main man pages were installed successfully.
    Also check:
    http://docs.sun.com:80/ab2/coll.40.6/REFMAN1/@Ab2PageView/201680?Ab2Lang=C&Ab2Enc=iso-8859-1
    For info on MANPATH and locale variables that may affect viewing.

  • Unable to view iTunes Store purchase history

    Hi All,
    I'm unable to view my iTunes Store      purchase history. When I try to do so from within iTunes itself I am taken to a seemingly blank store page, which seems to have no content according to VOiceOver, Apple's built-in screen reader. I've previously done this without a problem, so am rather annoyed.
    Is there any alternate way of requesting a refund? Could I call and do so?
    THanks!

    You can use the 'report a problem' page to contact iTunes Support (generally unless there is a problem with an item e.g. app doesn't work as described, film doesn't play etc. then purchases are considered final) : http://reportaproblem.apple.com

  • Unable to view attachment​s

    I am unable to view attachments emailed to my Curve.  Info messages pops up and says, "More request cannot be completed.  Service book information not found."  What the heck does that mean.  I've looked at every icon and menue and submenu, I do not know where I would go to fix the problem.  I even called the help desk at verizon... The assistance they provided did not...  Anyone out there can help me?

    Try to resend the service books:
    Options -> Advanced Options -> Host Routing Table -> MenuButton -> Register Now 
    If your question was answered, please accept it as a sollution and / or give Kudos ;-)
    Use the Search Field first! Maybe the question you want to ask already exists!

Maybe you are looking for