Urgent...RFC FM not getting on the other system

I have 2 RFC in one Function Group.
Other team is trying to access this FM's from NON -sap system.
They are getting one FM on his system but not the other.
What could be missing ... on R3 system or it must be import issue on Non-sap system

Hi,
     is your NON-SAP system is JAVA based. Then you have to first generate proxy for the NEW FM and also make sure the new FM is Remote Enabled. In the FM attributes you should be able to change it to remote enabled.
Regards,
Sesh

Similar Messages

  • First name is not transmitted to the other system through Idoc

    Hi all,
    Here customer is created in R/3 system & then transmitted to the other system through I doc.
    Issue is first name is not transmitted properly or is transmitted but nit correct value.
    I checked the segments of respective i doc in we05 there i could see right values. But in target system it is totally wrong or the word 'CONSTANT' is coming.
    what could be the reason & where i can find it out.
    Please help me
    Thanks
    JM

    Hi
    The issue should not be in SAP. You need to check with the middleware system which reads the data from SAP and triggers an IDOC and sends it to the other system.
    Regards

  • I deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help? I have tried the other  option that were posted. None of them worked!

    Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?

    ExciteWalk wrote:
    I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
    That's not very helpful, why are you here?

  • Proxy Error "Could not contact the other system"

    Hi
    I am getting this error when i run a report which a proxy.
    Could not contact the other system
    What i need to check?
    Thanks

    Hi Prabhu ,
    Hope you are using ABAP client Proxy !!
    I am getting this error when i run a report which a proxy.
    Could not contact the other system
    What i need to check?
    At ECC side :
    > Check the Transaction SLDCHECK is working fine
    > RFC Destination LCRSAPRFC and SAPSLDAPI is working fine
    > Entry is proper at SLDAPICUST Transaction
    Please share the message at XI end as well as at ECC end of SXMB_MONI ?
    Regards ,
    Edited by: Santosh Rawat on Oct 22, 2009 9:55 AM

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • Reg : data is not getting in the output

    hi team,
                 data is not getting in the  output, but it is getting in the debug mode
    REPORT ZSAPP10 .
    *tables : pernr.
    TABLES : PA0001.
    type-pools : slis.
    types : begin of itab,
            pernr type pernr,
            orgeh type orgeh,
            abkrs type abkrs,
            end of itab,
            begin of itab2,
            pernr type pernr,
            vorna type pad_vorna,
            nachn type pad_nachn,
            end of itab2.
    parameter : p_pernr like pa0001-pernr.
    *DATA:  g_cprog  tYPE SY-CPROG.
    data : i_itab1 type table of itab initial size 0,
           i_itab2 type table of itab2 initial size 0.
    data : w_itab type itab,
           w_itab2 type itab2.
    data : t_fieldcat type slis_t_fieldcat_alv,
            w_fieldcat type slis_fieldcat_alv.
    data : t_event type slis_t_event,
            w_event type slis_alv_event.
    data : t_listheader type slis_t_listheader,
           w_listheader type slis_listheader.
    *get pernr.
    w_event-form = 'TOP_OF_PAGE'.
    w_event-form = 'sub1'.
    append w_event to t_event.
    w_listheader-typ = 'H'.
    w_listheader-info = 'this is new top of page'.
    append w_listheader to t_listheader.
    select pernr
           orgeh
           abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
    w_fieldcat-col_pos = 1.
    w_fieldcat-seltext_m = 'personnal no'.
    w_fieldcat-fieldname = 'pernr'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 2.
    w_fieldcat-seltext_m = 'org. unit'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'orgeh'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    w_fieldcat-col_pos = 3.
    w_fieldcat-seltext_m = 'payroll area'.
    w_fieldcat-tabname = 'i_itab1'.
    w_fieldcat-fieldname = 'abkrs'.
    w_fieldcat-outputlen = '20'.
    append w_fieldcat to t_fieldcat.
    *g_cprog = SY-CPROG.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
               I_INTERFACE_CHECK                 = ' '
               I_BYPASSING_BUFFER                =
               I_BUFFER_ACTIVE                   = ' '
                 I_CALLBACK_PROGRAM                = SY-CPROG
               I_CALLBACK_PF_STATUS_SET          = ' '
               I_CALLBACK_USER_COMMAND           = ' '
               I_CALLBACK_TOP_OF_PAGE            = ' '
               I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
               I_CALLBACK_HTML_END_OF_LIST       = ' '
               I_STRUCTURE_NAME                  =
               I_BACKGROUND_ID                   = ' '
               I_GRID_TITLE                      =
               I_GRID_SETTINGS                   =
               IS_LAYOUT                         =
                 IT_FIELDCAT                       = T_FIELDCAT
               IT_EXCLUDING                      =
               IT_SPECIAL_GROUPS                 =
               IT_SORT                           =
               IT_FILTER                         =
               IS_SEL_HIDE                       =
               I_DEFAULT                         = 'X'
               I_SAVE                            = ' '
               IS_VARIANT                        =
                 IT_EVENTS                         = T_EVENT
               IT_EVENT_EXIT                     =
               IS_PRINT                          =
               IS_REPREP_ID                      =
               I_SCREEN_START_COLUMN             = 0
               I_SCREEN_START_LINE               = 0
               I_SCREEN_END_COLUMN               = 0
               I_SCREEN_END_LINE                 = 0
               IT_ALV_GRAPHICS                   =
               IT_ADD_FIELDCAT                   =
               IT_HYPERLINK                      =
               I_HTML_HEIGHT_TOP                 =
               I_HTML_HEIGHT_END                 =
               IT_EXCEPT_QINFO                   =
             IMPORTING
               E_EXIT_CAUSED_BY_CALLER           =
               ES_EXIT_CAUSED_BY_USER            =
                 TABLES
                 T_OUTTAB                          = I_ITAB1[]
              EXCEPTIONS
                PROGRAM_ERROR                     = 1
                OTHERS                            = 2
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
          FORM sub1                                                     *
    FORM sub1.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = t_listheader
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    ENDFORM.                                                    " sub1

    write this way...
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
            i_callback_program                = w_repid
            is_layout                = wa_layout
            i_callback_user_command  = 'USER_COMMAND_ACCT'
            i_grid_title             = 'Document Status Report'
             it_fieldcat                       = it_fcat[]
         IT_SORT                        = IT_SORT[]
             it_events                = it_events
             TABLES
               t_outtab                        = it_final_data[]
          EXCEPTIONS
            program_error                     = 1
            OTHERS                            = 2.

  • Pages 2.0 will not get past the "getting started" screen

    i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
    has anyone else experienced something similar?

    Had the same problem. This sovled it for me:
    Just let it load.
    In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
    For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

  • HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage.  What would I do to get into my ipad?  please I need your help

    Please I need a help.  I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full.  Please do you have a knowledge of how I can get rid of the message and get into the ipad?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

  • Hi I  newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

    Hi I  newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
    Please help me out

    Hi Rajesh778484,
    Welcome to the Apple Support Communities!
    I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset. 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Best regards,
    Joe

  • Hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen

    hi...m using a mac pro quad core.....its not booting up...i can only  see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
    regards,
    v.s.bharan

    Welcome to Apple Discussions!
    Do you keep your data backed up?
    If not, you should always do so*:
    http://www.macmaps.com/backup.html
    You never know when a hard drive or a directory might go bad.  Having a bootable clone is a must.
    That link also shows you some tools you can use to recover data.
    If you aren't backed up, try buying those tools first, before attempting to repair the directory.
    Directory issues can be fixed with these tools*:
    http://www.macmaps.com/directoryfaq.html

  • How can I get back the other version of itunes?

    It was much easier to use and way more confortable, How can I get back the other version of itunes? It was much easier to use and way more confortable
    I can't pass playlists from itunes to my i-pod, and the sthetic of the new itunes is not a good one.
    Could I get back an older version? those were easier to use, more simplier

    Apple wisely leaves a copy of iMovie version 9 installed in the Application folder when you download version 10.

  • My 4th Gen Ipod touch will not get past the apple logo

    My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it).  Once it gave me the connect to itunes screen.  I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP! 

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

Maybe you are looking for