URGENT: rpcbind won't start on Solaris 10 x86

Hello folks,
I'm in a dire fix: rpcbind's start method on Solaris 10 x86 is exiting with status 10. Does anyone know what this status 10 means? I can't find out by reading through its start method file at /lib/svc/method/rpc-bind and this machine is critical.
Any help would be greatly appreciated...

Similar Messages

The Database of SunMc 4.0 didn't start, on Solaris 10 X86

Hello, happy new year, i am installing the three layers of SunMC 4.0 (server, agent and console), under Solaris 10 X86.
But, after setting the Web Server Security Key, the Web Server Port Selection, snmp Port,etc, the installation fails to start the DB used by the SunMC 4.0
This is the Log
The system memory to be compared has mapped to : 512
Skipping the Disable SNMP panel as a port other than 161 is specified as the agent port
The web server organization is given as : elektra
The web server location is given as : unefon
The Setup script will be executed as : /var/opt/SUNWsymon/install/guibased-setup.1199486648293.sh
SYMON_JAVAHOME is set to: /usr/java
JDK version is: "1.5.0_12-b04"
This script will help you to setup Sun Management Center 4.0.
Following layer[s] are installed:SERVER,AGENT,CONSOLE
None of the layers is setup.
Following layer[s] will get setup: SERVER,AGENT,CONSOLE.
Database will be setup.
Following Addon[s] are installed:
Advanced System Monitoring,Service Availability Manager,Performance Reporting Manager,Solaris Container Manager,System Reliability Manager,Generic X86/X64 Config Reader.
Checking memory available...
Configuring Sun Management Center DB...
Initializing SunMC database.
Successfully enabled service sunmc-database
Successfully disabled service sunmc-database
Initiating setup for Sun Management Center Server Component.
This part of the setup process does the Sun Management Center Server Component setup.
Creating the group esadm that contains Sun Management Center Admin Users.
Creating the group esdomadm that contains Sun Management Center Domain Admin Users.
Creating the group esops that contains Sun Management Center Operator Users.
You need to setup a user as a Sun Management Center administrator.
This person will be added to the esadm and esdomadm groups.
You must enter a valid username: : root
Generating server security keys.
Setting up web server...
An encrypted security key is needed for the Sun Management Center web server.
The key is generated based on the organization and location you provide.
Enter the name of your organization : : elektra
Enter the geographical location of this host : : unefon
Configure Sun Management Center web server port. Default port is 8080
Press RETURN to force default port.
Enter port you would like to use [ 1100 to 65535 ]: : 8080
The sunmcweb web application has been successfully deployed.
Using /var/opt/SUNWsymon/cfg/console-tools.cfg
/var/opt/SUNWsymon/cfg/tools-extension-j.x updated.
Starting Java Webstart based Sun Management Center
Java Console setup. This will take 2 minutes. Please wait...
Completing Sun Management Center Server Component setup.
Initiating setup for Sun Management Center Agent Component.
This part of the setup process does the Sun Management Center Agent Component setup.
Copying snmpd.conf file into /var/opt/SUNWsymon/cfg
Server component also installed locally.
Using this machine as the Sun Management Center server.
WARNING It appears that agent.snmpPort 161 is already in use.
Sun Management Center 4.0 agent may not be able to run due to this conflict.
There are two ways to correct this conflict:
1. Reconfigure the port that Sun Management Center 4.0 uses.
2. Stop the process that is using the port.
Press RETURN to force default port.
Enter port you would like to use [ 1100 to 65535 ]: : 1161
Updating /var/opt/SUNWsymon/cfg/domain-config.x with new port number.
Generating agent security keys.
PKCS11 Utilities package(SUNWcsl) was found.
Encrypted SNMP Communication is supported.
Setup of Agent component is successful.
**Starting Sun Management Center database setup...**
**verifyDatabaseDown: instance is not executing**
**Database consistency information missing.**
**Configuring database initialization parameter file**
**Stopping metadata component**
**Stopping cfgserver component**
**Stopping topology component**
**Stopping event component**
**Stopping grouping service**
**Stopping trap component**
**Stopping java server**
**Stopping webserver**
**Stopping agent component**
**Stopping platform component**
**Failed to enable service sunmc-database**
**Database setup failed : db-start failed**
**Updating registry...**
**As database is not setup, Marking server setup as failed in Registry.**
**None of the base layers are setup.**
**No Addon is setup.**
**Following Addons are not yet setup: Advanced System Monitoring,Service Availability Manager,Performance Reporting Manager,Solaris Container Manager,System Reliability Manager,Generic X86/X64 Config Reader**
**Could not finish requested task.**
**stty: : Invalid argument**
**stty: : Invalid argument**
**stty: : Invalid argument**
**stty: : Invalid argument**
**stty: : Invalid argument**
**opping agent component**
**Successfully disabled service sunmc-agent**
**Stopping platform component**
**Successfully disabled service sunmc-platform**
**verifyDatabaseDown: instance is not executing**
**Failed to enable service sunmc-database**
**Database setup failed : db-start failed**
**Updating registry...**
**As database is not setup, Marking server setup as failed in Registry.**
**None of the base layers are setup.**
**No Addon is setup.**
**Following Addons are not yet setup: Advanced System Monitoring,Service Availability Manager,Performance Reporting Manager,Solaris Container Manager,System Reliability Manager,Generic X86/X64 Config Reader**
**Could not finish requested task.**
The lay-out of my FileSystems is:
root@petersteiner install $ df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 4.2G 3.5G 721M 84% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 780M 856K 779M 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/usr/lib/libc/libc_hwcap1.so.1
4.2G 3.5G 721M 84% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 780M 396K 779M 1% /tmp
swap 779M 36K 779M 1% /var/run
/dev/dsk/c0d0s7 10G 10M 9.9G 1% /export/home
I hope, that someone can help me. pLZ

... and ... before running es-inst you have to add the PostgreSQL packages from the Solaris Media (5.10 U5 in my case)
Step order again:
- kill all postmaster processes (PostgreSQL Procs)
- if applicable svcadm disable all sunmc services
- /opt/SUNWsymon/sbin/es-uninst -X
- remove all SUNWpostgr* and SUNWpg* packages
- install these Packages - to be downloaded from http://www.sunfreeware.com/indexsparc10.html:
libgcc-3.4.6-sol10-sparc-local.gz , zlib-1.2.3-sol10-sparc-local.gz , readline-5.2-sol10-sparc-local.gz
or - the x64 respectively
- edit /etc/project to have this line for "default" : default:3::::project.max-shm-memory=(priv,2684354456,deny)
the value have to be calculated by one third of your physical memory.
- add the original postgreSQL packages from the Solaris install media :
SUNWpostgr-libs
SUNWpostgr
SUNWpostgr-contrib
SUNWpostgr-devel
SUNWpostgr-server-data
SUNWpostgr-server
SUNWpostgr-jdbc
SUNWpostgr-pl
SUNWpostgr-tcl
SUNWpostgr-docs
- run es-inst again from your install image path

QuickStart application won't run on Solaris 10 x86

Installed Weblogic 8.1 on a Solaris 10 x86 system (from the pj_server814_generic.jar) using the graphical interface.
At the end of the install, attempted to run the QuickStart application, and nothing happened.
Tried to run it from the <WL_HOME>/common/bin directory, and got the message:
org/apache/xalan/processor/TransformerFactoryImpl
Unable to create graphical environment for QuickStartFrame.
Please use a console that supports a Java based GUI.
I installed Weblogic (and Oracle, also) using Java based GUI installers.
Have been unable to locate any information to help overcome this problem.
Has anyone run into this, and/or have any ideas on how to make QuickStart application run?

I have the same proble.
If I specify -log=/tmp/log at startup, the log file reports a missing class file.
2005-08-18 09:34:21,486 FATAL [WizardController] com.bea.plateng.wizard.WizardController - Exception
java.lang.NoClassDefFoundError: org/apache/xalan/processor/TransformerFactoryImpl
at weblogic.xml.jaxp.RegistryTransformerFactory.<init>(RegistryTransform
erFactory.java:62)
at weblogic.xml.jaxp.RegistrySAXTransformerFactory.<init>(RegistrySAXTra
nsformerFactory.java:12)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at javax.xml.transform.FactoryFinder.newInstance(FactoryFinder.java:100)
at javax.xml.transform.FactoryFinder.findJarServiceProvider(FactoryFinde
r.java:278)
at javax.xml.transform.FactoryFinder.find(FactoryFinder.java:185)
at javax.xml.transform.TransformerFactory.newInstance(TransformerFactory
.java:103)
at com.bea.plateng.gpr.model.BEAHomeBuilder.<clinit>(BEAHomeBuilder.java
:85)
at com.bea.plateng.domain.DomainTaskHelper.getJvmModel(DomainTaskHelper.
java:901)
at com.bea.plateng.domain.DomainTaskHelper.getJvmModel(DomainTaskHelper.
java:861)
at com.bea.plateng.wizard.domain.console.tasks.JVMSelectionConsoleTask.b
uildWidget(JVMSelectionConsoleTask.java:59)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.setupUI(Con
soleInteractTask2.java:262)
at com.bea.plateng.wizard.console.tasks.AbstractConsoleTask.setupUI(Abst
ractConsoleTask.java:44)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:563
at java.lang.Thread.run(Thread.java:595)
2005-08-18 09:34:21,489 INFO [WizardController] com.bea.plateng.wizard.WizardCo
ntroller - Terminating.

Application Server 8 won't start on Solaris 10

I used the JES installer installed the application server ... no errors
but when I try to start the app server I get this
# ./asadmin start-domain domain1
Starting Domain domain1, please wait.
Log redirected to /var/opt/SUNWappserver/domains/domain1/logs/server.log.
Please enter password>
Please enter the master password>
no asnss in java.library.path
So why doesn't it have this in the path? Can anyone shed light on this?
I have set /opt/SUNWappserver/appserver/bin in my path

I am getting the same error. I installed Solaris 10 and when I try to start the bundled appserver, it wouldn't start. I removed it and installed again from JES 05Q1. when I tried to start domain1 it didn't exist. Nor did the .../domains/ directory. I created directory and when I tried to create domain1 I got same error 'no asnss in java.library.path'
Any ideas what is wrong?

******urgent***** cgServer won't start weblogic 8.1, need help...

When trying to start cgServer, I got the following errors. Could someone tell me how to solve this issue?
<Jul 31, 2009 4:36:54 PM GMT> <Info> <WebLogicServer> <BEA-000256> <Invoking com.bea.wli.init.BPMStartup.main(null)>
<Jul 31, 2009 4:36:56 PM GMT> <Error> <WLW> <000000> <Error in startup class com.bea.wli.init.WLIDBCreate Method: init:
com.bea.wli.init.WLIDBCreateException: At least one WLI data base object (TABLE WLI_USER) was missing
at com.bea.wli.init.WLIDBCreate$WLIDataSource.checkDBObjects(WLIDBCreate.java:880)
at com.bea.wli.init.WLIDBCreate.init(WLIDBCreate.java:999)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.bea.wli.init.BPMStartupShutdown.invoke(BPMStartupShutdown.java:439)
at com.bea.wli.init.BPMStartupShutdown.startup(BPMStartupShutdown.java:286)
at com.bea.wli.init.BPMStartup.main(BPMStartup.java:23)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.t3.srvr.StartupClassService.invokeMain(StartupClassService.java:229)
at weblogic.t3.srvr.StartupClassService.invokeClass(StartupClassService.java:160)
at weblogic.t3.srvr.StartupClassService.access$000(StartupClassService.java:36)
at weblogic.t3.srvr.StartupClassService$1.run(StartupClassService.java:121)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.t3.srvr.StartupClassService.invokeStartupClass(StartupClassService.java:116)
at weblogic.t3.srvr.StartupClassService.addDeployment(StartupClassService.java:88)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:755)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:734)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:519)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:990)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:948)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7731)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1322)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:340)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
>
<Jul 31, 2009 4:36:56 PM GMT> <Error> <Deployer> <BEA-149601> <The deployment framework was unable to resume accepting requests.>
<Jul 31, 2009 4:36:56 PM GMT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.init.WLIDBCreateException: At least one WLI data base object (TABLE WLI_USER) was missing]>
The WebLogic Server did not start up properly.
weblogic.management.AbortDeploymentException: weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.init.WLIDBCreateException: At least one WLI data base object (TABLE WLI_USER) was missing]
at weblogic.t3.srvr.StartupClassService.addDeployment(StartupClassService.java:92)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:755)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:734)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:519)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:990)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:948)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:475)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7731)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1322)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:340)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Reason: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.init.WLIDBCreateException: At least one WLI data base object (TABLE WLI_USER) was missing]
***************************************************************************

All I can do is provide you some background information on how WLI uses a database. Perhaps that will lead you to a clue about what changed in the database infrastructure.
By default, WLI uses the Pointbase database engine to manage some internal tables that it requires. When you create a WLI domain, it creates the infrastructure bits that control the initialization and management of the Pointbase tables.
It's possible to change your WLI domain to use a different, more robust, database like Oracle. In fact, BEA specifically said that they do not support WLI domains in production that are using Pointbase. It's not a very robust database engine, but it works well enough for demos and simple applications.
I don't know what you did to your domain, but you might try creating a new WLI domain and deploying your application to it.
I believe there's a different forum that might be more appropriate for WLI questions, but I'm not sure which one that would be.

Urgent help! G5 won't start up!

My G5 won't start up. I have resetted the PRAM thing with no effect.
Inside, there is a yellow LED with the word "trickle" on. I assume this means it is getting power, but it won't start up. Nothing happens when you press the button.
I urgently need this working ASAP. What can do?
Thanks.

When you press the power button, does anything at all happen? Do fans attempt to start or boot tone or video of any kind?
Verify power outlet is good. Actually this gets missed more then you might think. Does your power cord work on any other device?
Check that diagnostic LED 4 is on yellow when the power cord is connected. Press power button. Fans should go to hi when clear deflector is removed, If not - Replace power cord.
Check that diagnostic LED 3 is on and red when the power cord is connected and the air deflector is
removed. This indicates power is OK and within Regulation.
Reset the logic board by removing power Cord for TWO minutes or more.
Verify power supply cables are fully connected.
Verify that processors are properly seated. Check diagnostic LED 1 and/or LED 6.
Verify that processors’ mounting screws are properly tightened.
Reseat front panel board. Notice here it says reSEAT, not replace.
Test whether the front panel board or power button is at fault. Remove the installed front
panel board and swap it for a known-good front panel board if you have one. If you don't you can continue this process but each next step is costly and you may not have the parts to try these.
Replace front panel board.
Replace power button.
Replace power supply.
Replace logic board.
If you have a voltmeter, you can check power supply by first using very small probes on leads in order to insert beside wires on PS connector at logic board.

Mozilla on Solaris 10 won't start...

hi
I installed a couple of mozilla plugins (google bar etc) from mozdev and now my mozilla won't start. Is there a way to restore Mozilla to factory standards ? Unfortunately an uninstall have several dependencies.
OS : SunOS XXXXX 5.10 Generic_118822-11 sun4u sparc SUNW,Sun-Blade-1000
1. how can reset mozilla to original installation binary set ?
2. can any one please help me with the below truss... It's been doing this for a while now...
# truss /usr/sfw/lib/mozilla/./mozilla-bin
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) = 1
/1: write(8, " 8", 1) = 1
/2: read(7, " 8", 1024) = 1
/1: lwp_unpark(3) = 0
/3: lwp_park(0x00000000, 0) = 0
/1: read(5, "FA", 1) = 1
/1: ioctl(4, FIONREAD, 0xFFBFE9C4) = 0
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) (sleeping...)
/1: pollsys(0x002C7B38, 9, 0x00000000, 0x00000000) (sleeping...)
/3: lwp_park(0xF8E3FD38, 0) (sleeping...)
/3: lwp_park(0xF8E3FD38, 0) Err#62 ETIME
/1: pollsys(0x002C7B38, 9, 0x00000000, 0x00000000) = 1
/3: write(6, "FA", 1) = 1
/3: lwp_unpark(1) = 0
/1: lwp_park(0x00000000, 0) = 0
/1: write(8, " 8", 1) = 1
/1: lwp_unpark(3) = 0
/1: read(5, "FA", 1) = 1
/1: ioctl(4, FIONREAD, 0xFFBFE9C4) = 0
/3: lwp_park(0x00000000, 0) = 0
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) = 1
/2: read(7, " 8", 1024) = 1
/3: lwp_park(0xF8E3FD38, 0) (sleeping...)
/1: pollsys(0x002C7B38, 9, 0x00000000, 0x00000000) (sleeping...)
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) (sleeping...)
/3: lwp_park(0xF8E3FD38, 0) Err#62 ETIME
/3: write(6, "FA", 1) = 1
/1: pollsys(0x002C7B38, 9, 0x00000000, 0x00000000) = 1
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) = 1
/2: read(7, " 8", 1024) = 1
/1: write(8, " 8", 1) = 1
/1: lwp_unpark(2) = 0
/1: lwp_unpark(3) = 0
/1: read(5, "FA", 1) = 1
/1: ioctl(4, FIONREAD, 0xFFBFE9C4) = 0
/3: lwp_park(0x00000000, 0) = 0
/2: lwp_park(0x00000000, 0) = 0
/1: pollsys(0x002C7B38, 9, 0x00000000, 0x00000000) (sleeping...)
/3: lwp_park(0xF8E3FD38, 0) (sleeping...)
/2: pollsys(0xFADCFC38, 1, 0x00000000, 0x00000000) (sleeping...)
thanks
Sriram

Did you tried removing/restoring files under plugins directory " /<install directory>/.mozilla/plugins".
-Dakshin.

Jdeveloper 10.1.2.1 debugger won't start **** URGENT ****

I posted this in an older thread at the end:
Re: jdev 10 (9.0.5.2) debugger won't start
I can't run the debugger using the runner: jvm option of ojvm, hotspot, or client, and can't debug a simple standalone java class w/o an error window within the same project:
When I try to debug a standalone class (HelloWorld.java)
Status line showed connection problem.
got errors:
(can't gab the command line since JDEveloper is locked up - I have an hourglass and the only thing I can do is minimize, maximize, or close it)
c:\jdev10121\jdk\bin\]javaw.exe -ojvm -XXdebug,quiet,port2651 -classpath C:\Projects\jdev10121\MSI\MSI\
Debugger connected to local process.
Debugger connection to debugee process has been lost.
Debugger disconnected from local process.
Process exited.
Debugger unable to connect to local processIf I try to debug using client or hotspot, the application will start, but it does not recognize any of the breakpoints at all, so the debugger never kicks in. It does on a windows xp workstation running the same version of jdeveloper. Also, I can't recompile classes and replace on the fly.
I am able to run the web application regular (w/o debug) using ojvm.
My J2EE settings are 1.4.2_06. This is what resides in c:\jdev10121\jdk\bin. That same path is in my system path. The java_home env var is set to: c:\jdev10121\jdk.
I run the JDEV.exe rather than JDEVw.exe and nothing appears in the console window.
I can't recall anything about the machine that caused this to stop working as it was working less than 1 week ago. The machine is a Windows 2000 Dell workstation. I thought the problem might be caused by adding the Oracle XML Parser to the project, but I removed that library and commented out the code.
The only way the debugger works is to do REMOTE DEBUGGING (I'm connecting to my embedded oc4j via localhost though):
1. Start the application using hotspot in debug mode. Note the port that is sent to oc4j.
2. Create another project for remote debugging, and set the tools->project properties->remote debugging on for that project. right click and select remote debug, and type in the port from the other window. Once connected, I can set breakpoints and examine code, etc.
This is really troubling as putting system.debug messages for debugging is like going back to the early days of cobol on the vax for me -- no wait, the debugger under motif in 1994 worked... well, maybe before cobol then....
Anyway, please let me know if there's a solution to this.
Thanks,
Eric

BUMP.
THESE similar threads did not have a solution:
no response:
Debugger not working
<<NO RESPONSE>>
no answer:
Debugger unable to connect to remote process
<<NO RESPONSE>>
no answer
Debugger connection to debugee process has been lost
Debugger connection to debugee process has been lost
no response:
Debugger unable to connect to local process
Posted: Apr 13, 2006 12:27 PM
Debugger unable to connect to local process
I tried reinstalling JDeveloper but the debug function still does not work.
I just found this to be funny:
No search results for "debugger AND ojvm AND "won't start"". You should try a
less restrictive search.
Did you mean: debugger AND ovum AND "won't start" Again, thanks for reading this? (Am I talking to myself?)
Eric

Urgent!!! 5.0.1 Still Won't Start

I upgraded from iTunes 4.9 to 5.0.1, and like many others in the group, it simply won't start. I do have digidesign software, but I did all the latest upgrades. I followed the instructions for the reinstall, but had to use the following variations. My original OSX disc got left behind in the other side of the country when I moved, so I used disk warrior to repair the HD instead. Does that do the same thing? Or do I need the original OSX disc? Also when repairing permissions, the the following permissions never got fixed:
Permissions differ on ./usr/share/man/man1/less.1, should be -rw-r--r-- , they are -r--r--r--
Owner and group corrected on ./usr/share/man/man1/less.1
Permissions corrected on ./usr/share/man/man1/less.1
Permissions differ on ./usr/share/man/man1/more.1, should be -r--r--r-- , they are -rw-r--r--
Owner and group corrected on ./usr/share/man/man1/more.1
Permissions corrected on ./usr/share/man/man1/more.1
2005-09-26 22:39:48 -0400 - The privileges have been repaired on the selected volume.
Even though it says they have been repaired, each time I run disk utility, this still comes up. Could these permission errors be causing iTunes to not start?
Most people in this forum seem to be running panther or tiger. I'm still on jaguar. Does this make a difference?
I really need my iTunes library back soon! I'm need to put together music for a show that I am doing tomorrow!! Any help would be much appreciated.

Sorry, I can't tell you specifically since I don't run any Digi software (I'm going on what Digi and others have said re. conflicts with iTunes). Try searching this forum for "digidesign" or "protools" and you should come across other threads on the subject.
One other thing that can cause iTunes not to launch, particularly in the presence of the Digi drivers, is if any third-party iTunes plugins are installed. Removing any third party iTunes plugins from the iTunes plug-ins folder may resolve the issue. The plug-ins folder is located at:
MacHD>Users>your account>Library>iTunes>iTunes Plug-ins
Hope this helps.

Need urgent help! Mac OS X won't start up. Disk Utility can't find harddisk

I started up my computer today, and instead of booting into Mac OS X, the screen shows a folder with a question mark on it. I can startup my machine using my Panther disks that i've got, but when I go to disk utility, it can't find my hard disk. Looks like the hard disk is not mounting at all.
If i try to install Mac OS X, that also doesn't give me a hard disk to install it on..
I really need help on this because I was supposed to get work done today.
Would diskwarrior sort this problem out?
Cheers

Hi, Ken.
Start with the troubleshooting steps outlined in "Mac OS X: Your Mac won't start up."
If you're running Tiger (your profile does not indicate what version of Mac OS X you are using) and you only have the Panther install discs, do not use Disk Utility from the Panther discs on your startup disk. See "Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes."
I recommend you have someone at home send you all the discs you should have with you (Apple Hardware Test, Tiger Install Discs, Software Restore and Install discs, etc.) for your eMac by overnight courier, e.g. FedEx.
When you recover from this problem, it's also time to consider investing in a comprehensive Backup and Recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Any application using webkit won't start (urgent help needed)

Hi,
Any application that needs webkit won't start anymore. The problem is (appears to be) in one specific folder: /System/Library/Frameworks/WebKit.framework
All reports point to that folder, i restored it from a time machine backup but the apps still wont start. Is there a way to reinstall webkit?
Applications include:
- Safari, Mail, App Store, Adium, Dashboard, Messages, Notes, Reminders, Spotlight in the menubar, iTunes....... pretty much every application i need to make my Mac usable.
All error logs show this:
pplication Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Symbol not found: __ZN3JSC14JSGlobalObject16putDirectVirtualEPNS_8JSObjectEPNS_9ExecStateERKNS_10 IdentifierENS_7JSValueEj
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Any suggestions on how to fix the webkit problem?
Thanks,
Jay

First, I'd check in Safe Mode and see if the problem still occurs. If it does it could be a startup item or plug-in that's interfering. If not, try re-installing Safari.
Not sure it will touch WebKit though, you you may need to boot to your Recovery Volume and re-install the OS. Not too bad because it's an install in place and shouldn't touch any data, files or settings.

Solaris 10 x86 - SMC server not starting

Same problem as here :
http://groups.yahoo.com/group/solarisx86/message/12180
No solution yet ...
SMC server doesn't start at boot, and won't start manually with /etc/init.d/init.wbem start
starting it manually gives :
# export VIPER_HOME=/usr/sadm/lib/smc
# ./smcwbemserver -p 898 start
Starting Solaris Management Console server version 2.1.0.
endpoint created: :898
Solaris Management Console server exiting: internal initialization failed: Initialization failed for service com.sun.management.viper.services.Authorization.
Any idea?
I have a basic Solaris 10 setup, with Entire Collection selected.
My graphic card is not working so I had to install in text mode and access X remotely.

I believe this is a fault in the crypto file that is mentioned in the Yahoo X86 posting, namely pkcs11_kernel.so. I have a possible workaround for this. Try looking at:
http://www.webmin.com
This is a free Web-based management tool that has most but not all of the functionality of the SMC. I tried downloading and installing the Solaris package from their download page, but this didn't work. What I eventually did was remove the package and download and install the generic Unix version, which was webmin-1.160.tar.gz as of when I downloaded it. The only gotchas to watch for are to run the setup.sh script and select Sun Solaris as the O/S, then select Solaris 9 as the version (they don't technically support 10 yet). I have been able to add users and groups and manage the disk without problems.
Rich Lair

Database won't start ... need to backup data

Hi,
My Oracle 10g Database in an heart beat stop working (I unplugged the network cable and now even with the cable on it won't start ... I've restarted computer lot's of times....) I've wasted too many time triyng to get this thing to work....
I need URGENTLY to uninstall and reinstall the 10g database but first I need to backup all of the data. What do I need to do to acomplish this? Is it enough to do a copy of the D:\oracle\product\10.1.0\oradata with all datafiles or do I need something else?
As I mentioned my idea is to copy all that I need to restore the database after reinstalling Oracle 10g.
Please point me a light... I'm completely lost here....
Nuno Vidal
-- Edited
I forgot to tell an important detail - I have an HTML DB application in my PC that I also must backup. I think that all HTML DB data is in the ORADATA, but I'm not sure... can anyone tell me anything about this?
Message was edited by:
NVidal

Hi.
To reinstall the database will not give you the html db repository back as far as I am concerned. If you are not able to bring up the current database, I don't see how you will be able to restore your html db data after creating a new database.
If you are able to get the old database up, I assume you can export the FLOWS_010600 and FLOWS_FILES schema and import them into the newly created database. (Keep the database name the same as the original to awoid reconfiguring the html db ORACLE_HOME). I have not done this in this particular matter, but uses this procedure for moving and upgrading databases.
You also have to create the user HTMLDB_PUBLIC_USER wich don't own objects. From my installation I can see that these users have a severe amount of system privs and object privs, so anyhow, your in for a severe amount of manuall work.
To manually create users, execute spool result from following query:
select 'create user '||username||' identified by values '''||password||''' default tablespace '||default_tablespace||' temporary tablespace temp account unlock;' from dba_users where username in ('FLOWS_010600','FLOWS_FILES','HTMLDB_PUBLIC_USER')
Assign sys privs to these users by executing spools:
SQL> select 'grant '||privilege||' to '||grantee from dba_sys_privs where grantee in ('FLOWS_010600'
,'FLOWS_FILES','HTMLDB_PUBLIC_USER');
Assign object privs the same way:
SQL> select 'grant '||privilege||' on '||owner||'.'||table_name||' to '||grantee from dba_tab_privs
where grantee in ('FLOWS_010600','FLOWS_FILES','HTMLDB_PUBLIC_USER');
Now roles;
SQL> select 'grant '||granted_role||' to '||grantee from dba_role_privs where grantee in ('FLOWS_010
600','FLOWS_FILES','HTMLDB_PUBLIC_USER');
You also have to create public synonyms, as these are not part of a schema import:
Run the following query and use the spool result to create public synonyms;
select 'create public synonym '||synonym_name||' for '|| table_owner||'.'||table_name from dba_synonyms where table_owner in ('FLOWS_010600','FLOWS_FILES')
Alle these sql querys has to be run on the target database, i.e. the database where html db is installed today.
So, the sequence of the entire operations is:
1) Execute a full export of the old target database as system user setting full=y
2) Execute all these queries described over. store the result in separate files.
3) Execute a full offline backup of old target database
4) Recreate database with same name as old target database
5) Verify that tablespace that is html db users default tablespace exist in new database.
6) Create users with script
7) Assing roles and system privileges with script.
8) Import using full=n fromuser=FLOWS_010600 TOUSER=FLOWS_010600.
9) Import using full=n fromuser=FLOWS_FILES TOUSER=FLOWS_FILES
10) Assign object privileges using script
11) Create public synonyms using script
12) Start html db with opmnctl startall and verify that you are able to connect and data exists.
Good luck
rgds
Kjell Ove

Solaris 10 X86 and disabling the desktop start up?

I want to disable desktop start up and use command line interface? How do I can do this? My Solaris 10 x86 is installed on virtual PC and the desktop (or x) uses a lot of resources and I don�t need it.

the only thing that worked for me was:
svcadm disable svc:/application/graphical-login/cde-login:default
I had been using CDE last. The suggestion to /usr/dt/bin/dtlogin -d did not keep the graphical login from happening (that's suggested in the official online docs), and "dtlogin" is not recognized as a service by svcadm so that doesn't work either. Finally, very few services are started by /etc/*.d/ any more, of the remaining scripts in /etc/rc2.d S99dtlogin is not among them. So do the above with newer releases, mine is u3.
Incidentally, didn't "init -r" used to reveal the run level? Hmm... been a while since using Solaris but I still consider myself a Solaris person. So much is changing... hope it's finally faster and comes with a compiler. Really, it's that simple. Oh and getting over Linux to realize that Solaris is Solaris (in case that needs translation for Sun decision makers - that means Solaris is already better than Linux with the aforesaid improvements). Sorry, very off-topic but I won't post anything for another several years ;-)

EMac won't start, help please

I am having two problems with my eMac. The first, much more pressing, problem is that it won't start. I was having problems installing the newest version of quicktime, so on the quicktime forums I read to Repair Permissions in the Disk Utility, so I did this, and everything seemed to go well, but when I restarted my computer, it would not load. It is stuck on a light grey screen with a dark grey apple logo in the middle. My keyboard won't repond to the point where i can't even open the disk drive. My second, much less urgent problem is that my disk drive doesn't recoginize any cd's, even ones that I have used with this computer before. this problem really means nothing at this point, since my computer won't start anyways.
If anyone could help me, it would be greatly appreciated.

Yes, I tied all of the suggestions for my problem.
You see a blank, gray screen
1. Make sure the latest firmware for your computer is installed. Check Apple Downloads for the latest versions. (Yes, it is installed)
2. Disconnect all peripheral devices, except for the Apple keyboard and mouse. This includes ADB, serial, USB, FireWire, SCSI, and PCMCIA devices. If this resolves the issue, connect one device at a time, restarting after each one, until you've determined which device is causing the issue. (All are disconnected)
3. Remove third-party hardware upgrades such as memory (RAM), microprocessor upgrade cards, and PCI cards. If this resolves the issue, add back one item at a time, restarting after each one, to isolate the issue. Note: Apple does not provide technical support for Mac OS X when used with third-party microprocessor upgrade cards. (Don't even have any third-party hardware upgrades)
4. Start up from your Mac OS X installation disc and check the hard disk with Disk Utility or, if necessary, fsck. (CD-drive will not even open, so can't do this)
5. If you are comfortable doing so, reset your computer's Power Management Unit. Specific directions are available elsewhere in the Knowledge Base. (Can't find how to do this on the anywhere)
6. Additional tips may be available in this document. (Document also had nothing that worker)
I will be buying a macbook regardless after my income tax comes in, so I don't deem the computer as worthy of spending any money to fix, but this was a pretty expensive machine to just discard, so I would like to try to get it running again.

URGENT: rpcbind won't start on Solaris 10 x86

Similar Messages

Maybe you are looking for