Urgent - SAP_ Microsoft Cluster error
Dear Friends,
We Installing our Production servers by using Microsoft cluster service. Our SID is P00
Servers name was SAPP and SAPDB
Today morning we try to start the instance in MMC it could not start. then we see the cluster service status by using Cluster manager we noticed the following errors
SAP P00_00 Service failed
SAP P00_00 Instance Offline
We checked the SAPoscol service it is running. Then we checked the Event viewer same error is repeated in event viewer.
We need your help to sort out this problem
thanks in advance
G.G.Karthickbabu
Dear Bernd,
Thanks for your quick response
All other instance are in online except
SAP P00_00 Service failed -(Generic Service)
SAP P00_00 Instance Offline -(SAP Resource)
in groups under cluster manger window
by
G.G.Karthickbabu
Similar Messages
-
STMS error message on the Microsoft cluster.
Hi,
I have successfully installed NW2004s on a Microsoft cluster. When I run STMS for the very first time on client 000, I am getting message saying "tp configruation not completely distributed".
Any ideas.
Regards,
N.SHi,
I will tell you the exact solution.
Login to your application server using sapgui. run the transaction SE06.
There you get an option perform post installation Actions. Click on it.
Then go to transaction stms and it will say you that you are logged in to your domain controller.
Further go to trnsaction rz10 and import profiles for all the active servers.
reward with good points. -
Win Server 2012 Failover Cluster - Error: Failed to bring cluster disk online
Hi Technet
I'm currently running running 2 VMs Win Server 2012 and would like to test Failover Clustering for one of our FTP server
I've added on both servers an additional partition, formatted and Online
One of the drives comes Online but cannot bring the 2nd disk online from the cluster manager
Error: failed to bring resource online - clustered storage is not connected to the node
Assistance would be greatly appreciated
Thank you
JabuHi jsibeko,
Since the VMware offer the MSCS shared storage solution themselves, I suggest you first ask VMware whether that shared storage is supported with your vSphere edition, I found
some VMware KB about the VMware shared storage for MSCS, may you can get more tips.
The VMware KB:
Microsoft Clustering on VMware vSphere: Guidelines for supported configurations (1037959)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959
Microsoft Cluster Service (MSCS) support on ESXi/ESX (1004617)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004617
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
System Copy on Microsoft Cluster
Hi,
We have ECC 6.0 SR2 with Microsoft Cluster on Oracle 10.2 & Windows
2003 Enterprise edition 64bit.
Installation is ABAP+java stack
Installation of CI and DB on same host.
Virtual hostname for database is ORACLEOT1
Virtual hostname for CI is SAPOT1
We have taken Database Instance Export using sapinst sapint_use_hostname=ORACLEOT1
command and executed from command prompt, Export completed successfully.
Now, we are trying to export the Central Instance using the same command and encountered error will Export ABAP
The step runR3szchk it is showing Error
Error log:
ERROR: ExeModify for write_ddloadd failed in row 42876
(rc = 26)
objectname = /1CN/LRMSCALEV02~0
objecttype = PRKEY APPL0
tabart = APPL0
rowcount = 0
error message returned by DbSl:
(null)
Please also suggest us for CI export, whether we need to give virtual
hostname of virtual hostname of Database or Virtual hostname of CI.
Regards,
$@ndyHello,
rc=26 means ' Primary key constraint violated '.Please check the
object /1CN/LRMSCALEV02~0 according to the
note 130648 R3load export: Write_ddloadd failed (rc=101)
Also update the kernel and dbsl files from marketplace and try export again
note 19466
regards,
John Feely -
Hi all,
I am in a testing enviornment.I had Microsoft 2 node cluster set up where the failover is happing.
I installed database software on 2 nodes and from one node i configured database where my datafiles are in storage.
I copied tnsnames,listener.ora from primary node to the second node.
On primary node my database is running fine,but when the failover happens and wheni log to my database its showing TNS error.
Please help..
Regards
BobsHi Bobs;
What is DB version? What is OS version?
Please see below which could be helpful for your issue:How to Set Up a Two Node Cluster for Content Server on Microsoft Windows [ID 758916.1]
Microsoft Cluster Server and Oracle Fail Safe Quick Start Guide [ID 187410.1]
RAC on Windows 2008: Oracle Grid Infrastructure / Clusterware Currently Incompatible with Microsoft Failover Cluster (MSFC) [ID 1157711.1]
Database Administration in an Oracle Fail Safe/Microsoft Cluster Server Environment [ID 221202.1]
Regard
Helios -
i loaded the newest version of Mozilla, i have windows vista. I began receiving microsoft defender error messages and now i can only connect the internet through explorer. i love using mozilla. what can i do to fix the problem?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Urgent ---group by syntax error
This is my syntax as below.But it doesn't work.Does anyone can tell me what's problem ? or it have another way to solve this quuestion? thanks .
sql syntax:
select a.txdate,a.costype,sum(cosamt) * (1+a.cosrate) as costamount
from sales_cost a
where a.txdate between '2003-01-01' and '2003-02-01'
group by a.txdate,a.costype;Although more specifics might have helped, I am assuming based on the title of the post: "urgent ---group by syntax error" and my test of the original code that I have identified the error. See the example below for how the original code produces a group by error and how the solution I provided executes without error.
SQL> -- test data:
SQL> SELECT * FROM sales_cost
2 /
TXDATE COSTYPE COSAMT COSRATE
03-JAN-03 1 3 .5
03-JAN-03 1 4 .25
03-JAN-03 2 4 .75
04-JAN-03 3 3 .5
04-JAN-03 4 4 .25
04-JAN-03 4 4 .75
6 rows selected.
SQL> --
SQL> --
SQL> -- wrong:
SQL> SELECT a.txdate, a.costype,
2 SUM (a.cosamt) * (1 + a.cosrate) AS costamount
3 FROM sales_cost a
4 WHERE a.txdate BETWEEN '2003-01-01' AND '2003-02-01'
5 GROUP BY a.txdate,a.costype
6 /
SUM (a.cosamt) * (1 + a.cosrate) AS costamount
ERROR at line 2:
ORA-00979: not a GROUP BY expression
SQL> --
SQL> --
SQL> -- correct:
SQL> SELECT a.txdate, a.costype,
2 SUM (a.cosamt * (1 + a.cosrate)) AS costamount
3 FROM sales_cost a
4 WHERE a.txdate BETWEEN TO_DATE ('2003-01-01', 'YYYY-MM-DD')
5 AND TO_DATE ('2003-02-01', 'YYYY-MM-DD')
6 GROUP BY a.txdate,a.costype
7 /
TXDATE COSTYPE COSTAMOUNT
03-JAN-03 1 9.5
03-JAN-03 2 7
04-JAN-03 3 4.5
04-JAN-03 4 12 -
Hi everybody, is there anyone who can explain me what to do when this message comes: "Microsoft Report Error"?
Since this morning I have been trying to use word, I open the document, I start working with it and after 5-10 minutes the computer crashes and this message comes. Recently I've re-installed Tiger, updated all the programms and installed quark Express 6.5.Try a search at http://groups.google.com/group/microsoft.public.mac.office.word for "Microsoft Report Error"; more appropriate place to resolve the issue than here.
-
Has anyone used Lookout 5.0 in a Microsoft Cluster?
I am trying to load Lookout 5.0 to a Microsoft Cluster. I have been succesful with the server side - cluster failover of the application and data retrieval from live and historical data. I can not get historical data from the client side.
NI does not support the use of Lookout 5.0 in Microsoft Cluster.
Joji -
Dear All
can any 1 help me regarding the microsoft cluster
the case is that we have a delay for about 12 minutes from the moment nodeA foll down till the moment node B takes the resources
can any 1 help
thanx
Amr OsamaHi AMR,
Try this Link.
[http://www.msexchange.org/tutorials/Implementing-Two-Node-Cluster-Windows-2003-Enterprise.html]
Thanks & Regards,
Sudheer.... -
Does anyone have experience setting up Forté in a Microsoft Cluster
Server (Wolfpack) environment?
If so, DOES IT WORK and what kind of things do I have to be aware of?
Thanks in advance for any information that may be provided on this
topic.
Tory Konitzer
Manager, Technical Services
Metrix, Inc. * 20975 Swenson Drive * Waukesha, Wisconsin 53186-4064
Phone: 414.798.8560 x1126 * FAX: 414.798.8573 * Email: [email protected]
http://www.metrix.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Contact the sales team. It may not be available in download section. For
documentation edocs section have a link for MSCS.
_shailesh
Yuva Raju wrote:
I am interested to setup clustering for tuxedo system. Please inform, from where
i will get BEA tuxedo Extension software.If you knows the link, send the link.
I looked into bea.com download page, i did not get about that software.
Thanks and Regards,
Yuva Raju -
Cluster Error SAP ECC EHP5 using DB2
Hi, I´m installing SAP ECC EHP5 over Windows Server 2008 R2 in MSCS using DB2 as Database.
I follow the steps in the installation guide and the first node was sucessfully installed. My problem is that when I execute the second step of the installation (database installation), in the sub-step "Now cluster the database" , after installed the database in the second node and run the utility db2mscs the following error occurs when I tried to initialize the DB2 service:
"An error occurred while attemping to bring the resource ''DB2 Server' online"
Error code: 0x8007138f
The cluster resource could not be found
Could you please give any hint to continue the installation?
Thanks a lot.
Kind regardsI made a mistake and opened the thread 2 times. The other one was answered.
Cluster Error SAP ECC EHP5 using DB2
Edited by: Esteban REyes on Oct 18, 2011 10:32 AM -
Years ago i did many SAP in the Microsoft Cluster Environment. I have to say that I like it, some problems can occour but the system was reliable.
At this moment we're planning new environments for the HCM servers. The Microsoft Cluster has been choosen as the main HA system. Well, I have read some documentation and many thinks are changed. The first in the new idea of the SPOFs ( single point of failures ) are the only that will be clusterized and the application servers will be installed in the local machines.
I need some clarification. We're not planning to have Application servers. Only one instance will be enough. Can I clusterize the dialog instance to avoid the local installation as I did in the past ? There is something i'm missunderstanding.
Best regards.Hello,
The multiple SAP installation in the same cluster is fully supported by SAP. You can find the guide:
Installation of Multiple SAP Systems in MSCS. MSSQL Server in:
https://service.sap.com/installnw70
Link:
Installation Guide - SAP NetWeaver 7.0 including EHP 1,
And dowload the guide under Multi-SID Installation on Windows MSCS.
I think that i will test it under lab conditions using vmware trying to understand the process. My main problem is that this are going to be installed by external consultants and I need to know all the process in order to avoid potential problems in the project start.
Best regards. -
My iCloud Contacts will not load in Microsoft Office. error is MAP[ was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll. How do I correc t this problem?
Hey PCSISTAH,
Thanks for the question. I understand that you are experiencing issues with iCloud Contacts and Microsoft Outlook. The following resource may provide a solution:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks,
Matt M. -
TS1368 unable to download itunes microsoft vc80 error any clues anyone
unable to download itunes microsoft vc80 error any clues anyone?
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)
Maybe you are looking for
-
How can I add a button to add multiple image in PDF from using adobe acrobat pro?
I have to create a pdf form using Adobe Acrobat Pro X. In this form I want to add a button where I can add multiple images to the field. I have tried using javascript event.target.buttonImportIcon(); and successfully add an image, but when I want to
-
Acrobat 8.1 Pro Error AcrobatInfo.exe - Application Error
Ever since updating to Acrobat Pro 8.1, I keep getting an error message. Font Capture: AcrobatInfo.exe - Application Error The Instruction at "0x03da593c". The memory could not be written. The error pops up several minutes after closing Acrobat. I wo
-
Organizing photos on the fly on the Touch.
Hello, I would like to know if anyone has figured a way to organize or at least mark specifiy photos on the Touch so that they are easier to find when browsing through them? I've got over 3000 pics on mine and it's a pain in the *** trying to recall
-
0fi_Ar_4 customer number missing when payer
Customer number is "sometimes" blank in the PSA when payment is made to payer account (cleared items) includes payer account number. Comparison of BSAD when payer is present against when payer is missing has not shown any differences. Any ideas why p
-
I need to know how to size a media server for 800-1200 user
i need to know how to size a media server for 800-1200 user