Urgent Score Question: Logic not displaying note values accurately

Logic is not displaying note values correctly in the score editor based on what is inputted in the piano roll. So for example this...
...is being displayed as this...
... which is not correct. As you can see Logic is translating one and a half crotchets as a minim. For reference the notes do not extend over the line so it appears to be a Logic resolution problem or something.
Does anyone know how to solve this? I've had it happen on numerous occasions but now it's a real problem. Any help greatly appreciated and rewarded.
Sidx.

Hi
Try turning OFF 'Interpretation' in the Staff Style Inspector.  You may also need to adjust the Score quantisation value to get the look you are after.
CCT

Similar Messages

  • Cost Sheet is not displaying condition values

    Hello All,
    When i am running the transaction code KGI2.
    System is calculating the Overhead values and updating the Actual Overhead cost for the Oder but it is not  displaying the values in the Cost Sheet, when we select Dialog display check box.
    Can any one help me out. do  have to do some thing in the Configuration to get this values displayed in the Dialog Display feild.
    Best Regards.
    Ravi

    Hi,
    First define the Costing sheet in SPRO
    Click new entries and select  define Costing sheet with Description
    Now select the costing sheet and double click on the Costing sheet rows, now click new entries
    enter row ,overhead  ,description and save
    Click Check to check the costing sheet
    Assign costing sheet to your Production order..Enter in the assigned costing sheet,r the overhead that have overhead key
    Assign overhead key to the overhead group
    Regards,
    Raj

  • Display extra values not displaying extra value

    Hi,
    I have a SQL query that returns a LOV. I have "Display Extra Values" set to Yes. However, I don't see my "extra value" in the Select List. ?? Yet, when I check the session state, the value in the session state is the extra value. So how come I don't see it in my Select List?
    Thank you.

    This is from the on-line docs:
    To define a value that does not display in the list of values:
    a) From Display Extra Value, select Yes.
    The extra value is used if the actual column value is not part of the LOV. In that situation, the actual value is shown. If you do not display extra values, you may end up with the wrong value and unintentionally update your data incorrectly.
    b) In Null Value, specify the value that displays.
    c) If you have not selected a Named LOV, enter the query used to display a select list in the LOV Query field.
    Hope that helps.
    Thanks,
    Joe

  • Sort not Displaying 0 Value

    Hi,
    I have applied a condition for Sorting in ascending order as Top % and 100 for the selected Key Figure.
    However, the report does not display Zero values for the key Figure after sorting.
    How can i take care of this limitation?
    Regards
    Shweta

    Hi Shweta,
    if u r using condition for ascending then ur zeroes should come in that range , if it not then u have to increase  your value limit . But this will depend on your requirement ..
    Regards..

  • Dynamic Select List not displaying correct value

    Hi there!
    I have a page with a dynamic repeat region.
    As I press one record I get up all the details based on id on an edit page.
    The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
    All the other values are correct, also the values in the repeat region on index page,
    but the value from the Select List on edit page is just displaying the initially selected item.
    Have tried using SELECT DISTINCT in the SQL statement, but no luck.
    Any other ideas?
    Cut and paste from form:
    <select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
                        <option value="Ev" selected="selected">Ev</option>
                        <option value="Fv">Fv</option>
                        <option value="Rv">Rv</option>
                        <option value="Kv">Kv</option>
                      </select>
    Recordset
    <%
    Dim rsAs
    Dim rsAs_cmd
    Dim rsAs_numRows
    Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
    rsAs_cmd.ActiveConnection = MM_LabCon_STRING
    rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
    rsAs_cmd.Prepared = true
    rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
    Set rsAs = rsAs_cmd.Execute
    rsAs_numRows = 0
    %>
    Regards,
    Christian
    DWCS5 | .Asp | MS Access

    Ok, here goes the top down approach...
    In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
    Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
    <div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
    <div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
    Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
    The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
    This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
    The actual javascript function that is contained in the 108.js file is:
    function showHideDiv(objThis, inBool){
         var divid = "div" + objThis.id.substring(3);
         if (inBool) {
         ShowDiv(divid);
         else {
    HideDiv(divid);
    That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
    function ShowDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
    function HideDiv(divid){
         eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
    Hope this helps.

  • Setting DAQ channel by property node does not display the value

    I am writing a configuration VI to set channel selection and calibration parameters for an SCXI chassis. I store a default setup in a configuration (ini) file and read that file automatically when the VI is called. The value from the file are set by property nodes using the "Value" property. The values from the file do not display in the DAQ channel selection rings, but the numerical calibration values do display correctly. When I click the down arrow in the channel rings, the correct value displays.
    This behavior exists both in LabView and app-builder EXEs. Also, if I change the property nodes for the DAQ channels to local variables, it works. The Value (signaling) property doesn't cause them to display
    properly either. Why can't I use the property node?

    I don't understand exactly what you are trying to do.
    Please upload a simple VI to demonstrate the behavior you are describing. Remember also to attach the .ini file.
    Best regards,
    Philip C.
    Applications Engineer
    National Instruments
    www.ni.com/ask
    - Philip Courtois, Thinkbot Solutions

  • Filter not displaying all values

    When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
    I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
    Is there a setting I am missing?

    I think that your description of the problem doesn't help a lot. Are you using interactive reports?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Pivot table not displaying the values correctly

    Hi,
    I have created a pivot table in which i am using 2 tables. I pulled columns from table A and one column from table B in the measures section to get the grand total. All the rows are comming fine but, its not returning any values for tableB's column(if i pull it into measures).
    If the column stays under rows section, the report is comming out fine.
    I need the total to be displayed in the report.
    Can some body help me with this.
    Thanks

    Hi David,
    i have set the column's aggregation to sum, and it is comming out correctly in the grand total, how ever, i have some of the coulmns which i am taking the %
    col3= (col2/col1)*100
    col1- aggregation set as Sum, col2 and col3 is set as default
    The values for col3 are comming finr in report , where as it is not returning correct value for garnd total row.
    ex: row w--- col1 col2 col3
    row1-----6630 1130 17.04
    row2 6114 994 16.26
    total 23317 3739 56.40(should be 16.2..)
    For col3 it is calculating like this(3739-total of col2/ 6630 -first row of col1 *100)
    Instead of taking total , it is taking the first row.
    I tried different aggregations, but was still unable to get the correct value. Can you please let me know if i am missing anything.
    Can we define custom aggregations.
    Thanks
    Gayatri
    Edited by: user12589255 on Aug 3, 2011 2:55 PM

  • Loupe not displaying color values Aperture 3.4

    I've been having issues with the color value feature of the loupe disappearing although 'display color values' is checked.  It will stop working after I've been using it for a few hours without incident.  Sometimes fix itself if I quit Aperture, most of the time this doesn't work.  All of the loupe's other functions seem to work normally, even as the color data is not displaying.  I have the issue while tethering and while editing/reviewing.  I use the color value feature often, so it's pretty obnoxious. 
    Camera is compatable, and all my software is up-to-date.
    Thanks for your help!

    What is your MacOS X version? Your profile signature (PowerBook, Mac OS X (10.4.11)) cannot be right, if you are using Aperture 3.4.
    Testing with Aperture 3.4.3 on MacOS X the color values will vanish, when I do not use the "Use Centered Loupe" option. With the "Centered Loupe" the values will always be shown. How is your Loupe set?
    Regards
    Léonie

  • Crystal Report V9 do not display decimal value HELP!

    <p>I have a field in Informix data type is Decimal(6,2)</p><p>when i used the field in the report, the decimal is not displayed</p><p>example: field1 = 305.50, in crystal report it only displayed 305.00, already setup the formatting. any possible solution?, please help!</p>

    <p>have check all the options in my pc and crystal report, all seems to be ok, and have tried displaying an informix field decimal(5,2), and it displays ok (154.23) in my crystal report, but when trying to display the field decimal(6,2) crystal report display decimal up to 99.99, but when it reaches 100+, it will not display the decimal, very weird, help.</p><p>have tried the formula as well but still doesnt work.</p><p>any other possible solutions, pls help, thanks.</p>

  • Can you post Notes (Display Note) at a higher level of aggregation than CVC

    I am only able to post Notes with the Display Note at the CVC level.  ALL PRODUCTS ALL CUSTOMERS and I receive the error message "No Notes can be processed in the current selection".  ONE PRODUCT ALL CUSTOMERS OR ALL PRODUCTS ONE CUSTOMER and I get display only no input (greyed out).  I can post notes at the CVC level.  Is this the only level you can post notes.

    HI Kevin ,
    Yes there are restrictions on the levels you put the note and the level you can edit the notes.and hence those will be greyed out at certain levels .
    For more details please refer my earlier post [No notes can be processed in the current selection - Error Msg|Re: No notes can be processed in the current selection - Error Msg.]
    Regards,
    Digambar

  • Logminer not displaying right values

    Dear all,
    10.2.0.4 on solaris 10
    exec DBMS_LOGMNR.ADD_LOGFILE ('/arch/TABS2_133083_662754021.arc');
    EXECUTE DBMS_LOGMNR.START_LOGMNR(OPTIONS => DBMS_LOGMNR.COMMITTED_DATA_ONLY);
    when v$logmnr_contents is queried, it is displaying the sql_redo and sql_undo as
    insert into "UNKNOWN"."OBJ# 165170"("COL 1","COL 2","COL 3","COL 4","COL 5","COL 6","COL 7","COL 8") values (HEXTORAW('c410323d43'),HEXTORAW('706f7274616c'),HEXTORAW('c7150b04120a383a'),HEXTORAW('c120'),HEXTORAW('3137322e33302e302e3435'),HEXTORAW('3137322e33302e302e3435'),HEXTORAW('7075626c6963'),HEXTORAW('687474703a2f2f7777772e766976612e636f6d2e6b772f706f7274616c2f706167652f706f7274616c3f5f7061676569643d6e756c6c265f6461643d706f7274616c265f736368656d613d504f5254414c'));How do I get the exact insert statement ? (instead of the above binary values)
    Kai
    Edited by: KaiS on Apr 1, 2010 6:07 AM

    What is object# 165170? Is it your table of interest?
    Log miner produces the SQL necessary to undo the change and since it is using hex strings I would suspect one possible reason might be that all the columns in question are encrypted.
    When you identify the object and list is create DDL that should identify if this guess is correct or not. If not then hopefully it will provide the necessary information to identify what you are seeing.
    HTH -- Mark D Powell --

  • JComboBox setSelectedIndex not displaying correct value

    Hi,
    Not sure if this is a bug or implementation issue.
    When trying to use the setSelectedItem(int) method of JComboBox, what's being displayed in the panel is not the same item that is selected when you open the dropdown.
    If you run the example code below a few times in a row you'll see that it eventually displays something other than "Item 2". However, if you open the combobox it will always display the correct value. So, just on a whim I surrounded the setSelectedIndex(int) call with the SwingUtilities.invokeLater method and it all started to work. I was able to run it 6 times in a row and always displayed the correct value. Whereas without it usually by the 3rd run, I'd see the issue.
    So, my question is - Should I be putting all setSelectedXXX() methods in SwingUtilities.invokeLater methods? We originally found this issue in our JApplets. I made the code below so I could post it, but essentially it's the same thing. We do use Javascript to call back into the JApplet to set the indexes. I'm guessing I DO need to since we're dealing with different Threads and Swing?
    Thanks,
    - Tim
    import java.util.logging.Level;
    import java.util.logging.Logger;
    import javax.swing.JComboBox;
    import javax.swing.JFrame;
    import javax.swing.JScrollPane;
    import javax.swing.SwingUtilities;
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    * @author tmulle
    public class Test {
        public static void main(String[] args) {
            // Create the Frame
            JFrame f = new JFrame();
            final JComboBox combo = new JComboBox();
            // Add some items to the combo
            for (int x = 0; x < 20; x++) {
                combo.addItem("Item " + x);
            // Create a scrollpane
            JScrollPane pane = new JScrollPane(combo);
            f.getContentPane().add(pane);
            f.setSize(300, 200);
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            // Tester thread
            Thread t = new Thread(new Runnable() {
                public void run() {
                    try {
                        Thread.sleep(5000);
                    } catch (InterruptedException ex) {
                        Logger.getLogger(Test.class.getName()).log(Level.SEVERE, null, ex);
                    // Uncomment this and things seem to work consistently
    //                SwingUtilities.invokeLater(new Runnable() {
    //                    public void run() {
    //                        combo.setSelectedIndex(2);
                    // Comment this out when uncommenting above
                    // This is supposed to select the 2 index in the list
                    // However, run running the example multiple times you'll see
                    // that it sometimes displays something other than the correct
                    // value. But the correct items is selected in the dropdown
                    combo.setSelectedIndex(2);
            // Start the thread
            t.start();
            // Show the frame
            f.setVisible(true);
    }

    You do need to set the selected index from the EDT, as shown in the code you commented out. Or, the SwingWorker class is very useful for simplifying your threading code.
    Also, if I may, I think Darryl is suggesting you also create the gui components in the EDT as well. People often use this construct in the main method since the main method is run in a separate thread from the EDT, just like the threads you create. It is technically not safe to make Swing calls from the main() method.
    public static void main(String args[])
            SwingUtilities.invokeLater(new Runnable()
                public void run()
                    createAndShow();
    }Edited by: mpmarrone on Apr 27, 2010 1:08 PM

  • PC report S_E38_98000088 does not display periodic values

    Dear colleagues,
    In ECC6.0/new GL we are trying to use report  S_E38_98000088 to display Actual/Plan values for a specific month/period, but it looks like the system will always show a cumulative value since the beginning of the fiscal year.
    We enter the following on the selection screen:
    Currency type: 10
    Company code: XXXX
    Account number: XXXXXXXX
    Ledger: 0L
    Controlling area: XXXX
    Plan version: 1
    Fiscal year: 2011
    From Period: 4
    To period: 4
    Profit Center: XXXXXXX
    But when we execute the report, and srill down to the line item level, we see that the report picks up all posting in 2011 instead of 04.2011 only.
    The same happens if we try to execute the report for 12.2010 - it will select all postings in 2010.
    Anyone knows why is it working like that and how can I display a specific period?
    Many thanks,
    Yoel.

    Shalom yoel,
    this is not a bug.
    Please bear in mind that  this report  shows cumulative values
    for Balance Sheet accounts.
    The calculated keyfigure BILWERT (Balance Sheet Value) behaves in
    different ways for balance sheet and for P+L accounts. For balance sheet
    accounts it always provides you with cumulated values. For example
    for period 6 to 6 it will show cumulated value for periods 1 - 6 plus
    balance carry forward value.
    The BILWER is calculated like:
    BILWERT = WERTB + WERTE,
    WERTB - Balance sheet accounts value
    WERTE - Income statement account value
    But if an account is a P+L statement account, you will see the
    real period balance value for the particular period range. It means,
    that for period 6-6 you will see value for the single period 6. For
    period 1-6 you will see cumulated value for period range 1 - 6 without
    balance carry forward.
    The report behaviour is dependent on your Financial Statement Version
    (FSV) and how the particular accounts are valuated.
    It means the following:
    ~~~~~~~~~~~~~~~~~~
    1) All accounts assigned to the nodes "Assets" and "Liab+Equity" are
       taken as balance sheet accounts and cumulated values are provided
       for those accounts by report S_PL0_86000028 (and other GL reports)!!
    2) All accounts which are not assigned within the FSV at all are
       considered as balance sheet accounts and cumulated values are
       provided by GL drilldown reports.
    3) All accounts which are assigned OUT of "Assets" and "Liab+Equity"
       nodes within particular FSV are taken as Profit and Loss acounts and
       period values are provided for them in the GL drilldown reports
    The original settings (which you can see under T-cd: FS00) has no
    influence on it when using the FI-GL drilldown reports.
    Please take into account the note 1154817 and the documentation
    to OB58 and RFBILA00 how should define the correct FSV structure.
    That is the design and usage of the hierarchy of the Financial Statement
    Version and key figure.
    There is no error in the standard system
    br, Guido

  • Off setting account not displaying any values in FBL3N AND FBLL03

    Hi Experts,
    We did customization and assigned Customer ,Vendor ,plant fileds as special fields in customization client ,which same are appearing in FBL3N and also FBLL03 but without any value.
    I post an entry
    Rent account Dr
    To Vendor account.
    If i select Rent account in FBL3N GL line item display ,there is no value updated in vendor filed.Please help me
    Rgds
    Suma Mani

    Hi,
    In the Standard FBLxN it is not available.
    These are the steps required to have it available:-
    Contra Account in FBLxN
    Transaction FIBF
    Menu>Settings>Products> of a customer.
    New Entry:-
    Product = RFPOS
    Activ = Set Flag
    Save
    Menu>Settings>P/S Function Modules> of a customer
    New Entry
    Event = 00001650
    Product= RFPOS
    Module = Line_Items_Get_GKONT
    Regards,
    Amit

Maybe you are looking for

  • Dynamic binding from a  XML to pdf forms

    When i tried to prepopulate data from a XML to a drop-down list box, I am getting the values displayed in the PDF preview tab, but when I save the form as a PDF and open the PDF the vales are not getting pre-populated. Pls. resolve this issue for me

  • SAP NW 7.3 - add usage type

    SAP Netweaver 7.3 AS java on RHEL 6. Database db2 LUW 9.7. How would one add a usage type? For example I install usage types: AS Java NW Product Description Application Server Java Extentions Enterprise Portal EP Core Then the boss comes by and asks

  • Are WebJobs relying on best-effort storage analytics?

    I'm trying to understand how WebJobs works to determine whether it's something we can use. I've only played around with it for an hour so I'm by no means an expert. I've created a small simple web job which just processes blobs in a specific containe

  • Syntax error on token "class", invalid Expression

    Hai, i am new to java beans and i have written the following code which gives an error Code jsp: <%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Tra

  • Call Log appears in Emails

    New to the support forums but cannot figure this out. My curve has started listing the call log in with my emails. I have tried to adkust the settings to sort it but cannot figure what's wrong. Any ideas?