Urgent! Script question!!!
I'm assuming scripts will make this a reality for me!
I have actually done this before, but it was using DVDSP1.5 over 2 years ago...at this point I don't remember much scripting.
Okay here is what I have in the terms of assets:
1.) INTRO segment
2.) 30min documentary segment
3.) 30min skate profile edits (this is a rollerblade video)
4.) Added feature BONUS
5.) Credits
<<<These are all seperately encoded files. All video files. I did not list the menus...
My goal, is to have two PLAY ALL options on the menu.
A "PLAY ALL" that will play assets #1,2,3,5 (in that order)
as well as a "QUICK PLAY ALL" button on the same main menu that will play assets #1,#3,#4,#5 (in that order)
The easy way to do this would be to encode both these segments as whole mpegs, however, a majority of the information is exactly the same and doubling it would throw me over my disc limit.
The reason I'm doing this is that since it is a skate video and I want my users to be able to play the "QUICK PLAY ALL" incase they want to view only the skating sections, or they can play the "PLAY ALL" to watch the skating plus a documentary I shot in Europe.
I really just need scripts that allow the order of tracks to be played based around the dependance of what button they were linked from.
I have to have this sent out today, so production can begin on Monday. Any quick help will be greatly appreciated!
Thanks!!!!
Doug Urquhart ([email protected])
PS I use to be a member at TFDVD.com and that is where I was so deep into scripting, but now it is just a blur in my memory!
From my personnal experience I have not have problems using segments on the same track, the only problems I had in the past is having chapter points between them, causing buffers underun errors with old DVD players, that's usualy caused by bitrate going up too quickly at the chapter points. The only workaround I have found to date is segment re-encode, but you don't have that available, do you have anyway to analyze your encode to see if that could be the case? Or if you have at least 13 frames of black and silence you should be OK.
Similar Messages
-
Quick SAP Script question New Page Print
Quick SAP Script question
I have added a new page to an existing SAP Script BUT only want it to print if a condition is true.
I need to do this from within the form as the print program is SAP Std.
Any idea how I can prevent the new page from printing?
i.e. I need the form NOT to call the new page if the condition is false. Is there a way of forcing an exit or stop from with in the form?Hi,
To trigger a new page, there is script ediotr command NEW-PAGE.
so find where is that command is triggered and use the below code for trigger it on any specific condition....
if &condition& = 'True'
/* NEW-PAGE
elseif
/: NEW-PAGE
endif
so it means if condition is satisfied your new page will not work.. else it will...
Hope you got it...
Try this..
Best luck..
Regs,
Lokesh. -
Urgent SQL question : how to flip vertical row values to horizontal ?
Hello, Oracle people !
I have an urgent SQL question : (simple for you)
using SELECT statement, how to convert vertical row values to horizontal ?
For example :
(Given result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1
K. Smith ...............1
K. Smith ........................1
(Needed result-set)
MANAGER COLUMN1 COLUMN2 COLUMN3
K. Smith ......1 .......1 .......1
I know you can, just don't remeber how and can't find exactly answer I'm looking for. Probably using some analytic SQL function (CAST OVER, PARTITION BY, etc.)
Please Help !!!
Thanx !
Steve.scott@ORA92> column vice_president format a30
scott@ORA92> SELECT f.VICE_PRESIDENT, A.DAYS_5, B.DAYS_10, C.DAYS_20, D.DAYS_30, E.DAYS_40
2 FROM (select t2.*,
3 row_number () over
4 (partition by vice_president
5 order by days_5, days_10, days_20, days_30, days_40) rn
6 from t2) f,
7 (SELECT T2.*,
8 row_number () over (partition by vice_president order by days_5) RN
9 FROM T2 WHERE DAYS_5 IS NOT NULL) A,
10 (SELECT T2.*,
11 row_number () over (partition by vice_president order by days_10) RN
12 FROM T2 WHERE DAYS_10 IS NOT NULL) B,
13 (SELECT T2.*,
14 row_number () over (partition by vice_president order by days_20) RN
15 FROM T2 WHERE DAYS_20 IS NOT NULL) C,
16 (SELECT T2.*,
17 row_number () over (partition by vice_president order by days_30) RN
18 FROM T2 WHERE DAYS_30 IS NOT NULL) D,
19 (SELECT T2.*,
20 row_number () over (partition by vice_president order by days_40) RN
21 FROM T2 WHERE DAYS_40 IS NOT NULL) E
22 WHERE f.VICE_PRESIDENT = A.VICE_PRESIDENT (+)
23 AND f.VICE_PRESIDENT = B.VICE_PRESIDENT (+)
24 AND f.VICE_PRESIDENT = C.VICE_PRESIDENT (+)
25 AND f.VICE_PRESIDENT = D.VICE_PRESIDENT (+)
26 AND f.VICE_PRESIDENT = E.VICE_PRESIDENT (+)
27 AND f.RN = A.RN (+)
28 AND f.RN = B.RN (+)
29 AND f.RN = C.RN (+)
30 AND f.RN = D.RN (+)
31 AND f.RN = E.RN (+)
32 and (a.days_5 is not null
33 or b.days_10 is not null
34 or c.days_20 is not null
35 or d.days_30 is not null
36 or e.days_40 is not null)
37 /
VICE_PRESIDENT DAYS_5 DAYS_10 DAYS_20 DAYS_30 DAYS_40
Fedele Mark 35473 35209
Fedele Mark 35479 35258
Schultz Christine 35700
South John 35253
Stack Kevin 35701 35604 35402 35115
Stack Kevin 35705 35635 35415 35156
Stack Kevin 35706 35642 35472 35295
Stack Kevin 35707 35666 35477
Stack Kevin 35667 35480
Stack Kevin 35686
Unknown 35817 35698 35596 35363 35006
Unknown 35702 35597 35365 35149
Unknown 35724 35599 35370 35155
Unknown 35600 35413 35344
Unknown 35601 35451 35345
Unknown 35602 35467
Unknown 35603 35468
Unknown 35607 35475
Unknown 35643 35508
Unknown 35644
Unknown 35669
Unknown 35684
Walmsley Brian 35725 35598
23 rows selected. -
Scripting Question - Very Basic
Hello, I'm using the trial version of InDesign and am wondering if because it's the trial version that I can't load custom scripts from Adobe? I've downloaded and installed a Custom Calendar script [I can see the extracted files in/on my PC] but the app apparently doesn't see it. Any help you can offer is greatly appreciated. Thanks,
Thank you so much, you were spot on.
From: Peter Spier <[email protected]>
To: Friar5 <[email protected]>
Sent: Monday, December 12, 2011 3:18 PM
Subject: Scripting Question - Very Basic
Re: Scripting Question - Very Basic created by Peter Spier in InDesign - View the full discussion
Have you put thew script in a location that InDesign uses for scripts? See How to install scripts in InDesign | InDesignSecrets
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4079869#4079869
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4079869#4079869. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Hi all,
Could anyone advise me if i can add anything within - header('Location: http://www.mysite.co.uk/thankyou.html'); in the script below so as the page
re- directs back to the main index page after a few seconds ?
Thankyou for any help.
<?php
$to = '[email protected]';
$subject = 'Feedback form results';
// prepare the message body
$message = '' . $_POST['Name'] . "\n";
$message .= '' . $_POST['E-mail'] . "\n";
$message .= '' . $_POST['Phone'] . "\n";
$message .= '' . $_POST['Message'];
// send the email
mail($to, $subject, $message, null, '');
header('Location: http://www.mysite.co.uk/thankyou.html');
?>andy7719 wrote:
Mr powers gave me that script so im rather confused at this point in time
I don't think I "gave" you that script. I might have corrected a problem with it, but I certainly didn't write the original script.
What you're using is far from perfect, but to suggest it would lay you open to MySQL injection attacks is ludicrous. For you to be prone to MySQL injection, you would need to be entering the data into a MySQL database, not sending it by email.
There is a malicious attack known as email header injection, which is a serious problem with many PHP email processing scripts. However, to be prone to email header injection, you would need to use the fourth argument of mail() to insert form data into the email headers. Since your fourth argument is null, that danger doesn't exist.
One thing that might be worth doing is checking that the email address doesn't contain a lot of illegal characters, because that's a common feature of header injection attacks. This is how I would tidy up your script:
<?php
$suspect = '/Content-Type:|Bcc:|Cc:/i';
// send the message only if the E-mail field looks clean
if (preg_match($suspect, $_POST['E-mail'])) {
header('Location: http://www.example.com/sorry.html');
exit;
} else {
$to = '[email protected]';
$subject = 'Feedback form results';
// prepare the message body
$message = 'Name: ' . $_POST['Name'] . "\n";
$message .= 'E-mail: ' . $_POST['E-mail'] . "\n";
$message .= 'Phone: ' . $_POST['Phone'] . "\n";
$message .= 'Message: ' . $_POST['Message'];
// send the email
mail($to, $subject, $message);
header('Location: http://www.example.com/thankyou.html');
exit;
?>
Create a new page called sorry.html, with a message along the lines of "Sorry, there was an error sending your message". Don't put anything about illegal attacks. Just be neutral.
By the way, when posting questions here, don't use meaningless subject lines, such as "Quick script question". If you're posting here, it's almost certain to be a question about a script. It doesn't matter whether it's quick. Use the subject line to tell people what it's about. -
Unique Script Questions-timed startup?
Hello All,
I am long time mac fanatic with some unusual script questions. I have a project ongoing where I will need to put my pb 15" in a remote location with a Canon camera. Canon has transmitter device which will allow me via ethernet to ftp to my pb.
Here's essentially what I need to the script to do and I am trying to find out just how feasible this is. I need my laptop to bootup to receive photos via ftp at a certain time period. The camera will send to the builtin ftp software. Once booted I need the script to hold for period of about an hour. Once time has elapsed I need the script to connect to the internet via a broadband EVDO card. We are using one of the EVDO cards built in to Tiger. It then must ftp a folder of images to a remote server.
Simple, huh? : ) I am running Transmit as my ftp software. I believe it is scriptable and will watch a folder to send.
Any ideas? I'd love to hear them. I can be reached via scott at scottaudette.com.
This setup is going be used in very cool photo location but I can't publicly announce where.
Scott
G5 and PB 15" Mac OS X (10.4.7)'Transmit ... I believe it is scriptable' - yes it is. Go to How can I use AppleScript with Transmit? to download sample 'Transmit' scripts.
'Once booted I need the script to hold for period of about an hour.' - well then, save the script as a 'stay open' application, with an 'on idle () ... end idle' handler - with a return of (60 * 60) seconds; and then drag the saved application onto the 'System Preferences' 'Accounts' 'Login Items' tab's list - of the user which the Mac will boot to (when turned ON).
Mac OS X (10.4.4) -
Can I post here(Acrobat Windows) Java Script questions here?
Hello
Can I post here(Acrobat Windows) Java Script questions here? If not, wht is the correct forum?
THank youBack up and down to Acrobat Scripting. Bot Windows and MacIntosh Acrobat versions use the same JavaScript.
If you are using LIVECYCLE DESIGNER use their forums. The JavaScript syntax and objects are different in LIVECYCLE DESIGNER! -
The only thing i need to do is add a title or label attribute to some of the controls.
One of the ones to begin with that i am fixing is the ADF tag af:selectBooleanRadio. When i add some text to the shortDesc field of the control, the html is produces doesn't have the title attribute.
So i tried to use the corresponding trinidad control tr:selectBooleanRadio, and add some text to the same shortDesc field for the control, and in this case it does add a title attribute in the html that it produces.
Everything else in the code works fine as well when i add the trinidad control, except for one thing. I have a ValueChangeListener that gets called when you click on another tr:selectBooleanRadio. Within that valueChangeListener event handler function, i have a bunch of code which in the end displays a af:popup. The problem i am having when using the trinidad control is that it somehow is not allowing the display of the popup even though it is going through the code that executes display of the popup. When i click on another link or button that is supposed to display a different popup as well, then the popup associated with the tr:selectBooleanRadio also displays at that time, but not originally when the value changed by selecting a different tr:selectBooleanRadio.
So, my question is, are there any other successful ways of adding a title attribute to the these controls. If its the af:selectBooleanRadio how do we make it so that the html it generates has the title attribute, or if its the tr:selectBooleanRadio, what might be happening during the event handling that it is not allowing the af:popup to display?
A quick response to this appreciated since this is very urgent! Thanks very much for your help!JDev version is 11.1.1.5
ok, i will go one step at a time so that it is easy to understand. So i will only mention the first thing right now and then we can try other things later.
i have a af:selectBooleanRadio. After running the page/application, when the user does View Source in the browser for the page that has the radio button, it is in the form of an HTML tag <input> of type for radio button. What i want to do is to have a "title" attribute for the <input> tag for this radio button. I can use the tr:selectRadioButton trinidad control to do that, but then i have other issues with that, and we can talk about those later.
Let me know if it is still not clear.
Thanks very much for your help! -
FLASH MX 2004 action script question
Hi!
I need to create an script for a basic function; when mouse goes over a moveclip, that works also link, I want it to trigger an invisible red dot on a nerby map. I have created a movieclip and named it "red", it's a 1 sec clip with nothing in the beginning and a red dot in the end. I want this dot to trigger and show only when mouse goes over this specific link, otherwise it must be invisible.
I know this is pretty basic stuff and I have done this before few years back but I have forgotten how to do it and need help now.
Any help would be very much appreciated :-)
KimI still need help, this problem is little more complicated;
I can manage making the red dot visible and invisible by triggering roll over and roll out on a button.
The problem is, I have a navbar which is line of flags made to a movie clip, with 5 invisible buttons. These buttons are configured to do three different actions; get URL, trigger a light effect and a movement effect.
Now I need this invisible button to trigger my red dot also so that when mouse is over a certain flag a red dot appears on a map on the correct location.
I have the red dot on a new layer. It has instance name "redDot" and on the very first frame of this red button layer, I have action script that says: redDot._visible = false;
This works as it should and the dot is invisible when the movie has loaded.
I need to make this invisible button to trigger the visibility of my red dot, and I have tried to add the code:
on (rollOver) {
redDot._visible = true;
on (rollOut) {
redDot._visible = false;
to this invisible button, but it dosent work, furthermore it affects the other functions of the button/movie clip, which were working fine before.
Here is the code attached to this invisible button so far:
on (release) {
getURL(/:url1);
on (rollOver) {
gotoAndPlay(2);
on (rollOut) {
gotoAndPlay("sec");
I have the URL:s on an external text file.
So my question is; where do I add the action script to make it visible when moving the mouse over this invisible button? To my understanding, it should go in the same place as the other code that is working, but I'm doing something wrong...
I tried to do this:
on (release) {
getURL(/:url1);
on (rollOver) {
gotoAndPlay(2)
redDot._visible = true;
on (rollOut) {
gotoAndPlay("sec")
redDot._visible = false;
But it is wrong, I also tried like this:
on (release) {
getURL(/:url1);
on (rollOver) {
gotoAndPlay(2);
on (rollOut) {
gotoAndPlay("sec");
on (rollOver) {
redDot._visible = true;
on (rollOut) {
redDot._visible = false;
But it makes the other functions that worked to stop working.
I also tried to give the invisible button an instance name and do it like this:
invisible.on (rollOver) {
redDot._visible = true;
invisible.on (rollOut) {
redDot._visible = false;
And put them in the actions layer of button movie clip but nothing works.
Flash is really giving me a headache now...
To conclude, I made a simple test button, put it on the scene somewhere and and attached the rollOver and rollOut codes, targeting the "redDot" and it works fine, the button didn't need a instance name to work. I don't understand why I can't make it to work with the invisible button where it should be.
I hope this clarifies the point and I can get some help with this and sorry for bothering again with this problem.
Oh and I use old Flash MX 2004.
Thanks
Kim -
Madwifi-ng preup/predown script question [solved]
Hi,
I recently installed Arch 0.7.1 on my laptop.
So far I am very impressed with the speed and the simplicity :-)
I just have one small problem: madwifi-ng
Currently, I have to manually create the ath0 interface with wlanconfig, which is annoying. On the Gentoo forum I have found a partial script with preup/predown functions (the thread is located here)
preup() {
if [ "${IFACE}" == "ath0" ]; then
/sbin/wlanconfig ath0 create wlandev wifi0 wlanmode sta > /dev/null
return $?
fi
if mii-tool ${IFACE} 2> /dev/null | grep -q 'no link'; then
ewarn "No link on ${IFACE}, aborting configuration"
return 1
fi
return 0
predown() {
if [ "${IFACE}" == "ath0" ]; then
killall wpa_supplicant
/sbin/wlanconfig ath0 destroy
return $?
fi
return 0
I am using a Netgear WG511T pcmcia card.
I would really appreciate any suggestions on where to put this code, and how to modify it for use with Arch Linux, or if I should use something else alltogether.
Thanks in advance!Another interesting problem: I recently upgraded to the latest madwifi-ng code with svn update and also started using wpa_supplicant 0.5.0 (upgraded from 0.4.7)
The netcfg script stopped working and after a little tinkering I discovered that the following section from start_profile() in the netcfg script was killing wpa_supplicant before it could connect:
while ! wpa_cli status | grep "wpa_state=COMPLETED" >/dev/null 2>&1; do
if [ $i -gt 10 ]; then
wpa_cli terminate >/dev/null 2>&1
ifconfig $WIFI_INTERFACE down
stat_fail && return
fi
sleep 2
let i++
done
fi
I have now commented out the loop and running the command "netcfg netgear" no longer halts there and so far everything seems to be fine again. I am guessing more than a 20 second timeout is needed, so I'll try having the iterator increment to 30 or something and see if that solves it.
[EDIT]
Now using [ $i -gt 30 ]; and it works. On second thought, since everything now really just works and my main question was essentially answered, I am adding [solved] to the title.
Thanks again!
[/EDIT] -
URGENT : Challenge questions query: Oracle Access Manager 10g
Hi all,
This is a query regarding password challenge questions in Oracle Access Manager 10g. We have created password policies for a specific container in OID (say cn=xxx,cn=users,dc=oracle,dc=com) and it is working fine.
In order to exclude certain set of users (say user ABC ) for password policies, we have set the obpasswordchangeflag to false for those users which are in same container for which password policy is created.
When we try to login to the application with the user say ABC, I am not seeing any reset password page - I am happy till this point. However it is showing Configure Challenge questions page. Is there any way to bypass this page? Or is this the expected behavior?
This is very urgent and prompt reply is very much appreciated.
-MahendraHi Mahendra,
This is expected behaviour. In order to exclude the password policy management for some certains user for particular domain/container. please add the below configuration parameter to your OAM10g password policy.
Password Policy Filter Field (!(|(cn=xxx)(cn=abc)))
----Ajay -
This is probably a very basic question, but going through all
my old Flash work didn't help me remember...
I have my animation starting on the main stage with an image
fading in. when that is done playing, at the end i want it to go to
a movie clip on the stage and play it from frame 2. what is the
action script for this?Doesn't seem to be working... your_mc is the instance name of
the mc, correct? i placed this script in a frame - it's above where
my mc first appears and the initial animation on the stage ends. is
that correct?
stop();
tellTarget(mc_square-grid){
gotoAndPlay(2);
When I test the movie, the initial animation plays then
stops, but the MC does not start playing. and the following error
message appears:
Target not found: Target="NaN" Base="_level0"
quote:
Originally posted by:
ActionScripter1
tellTarget(your_mc){
gotoAndPlay(2); -
Any thoughts why the following script generates will only force a refresh of the smart playlist "Random Country" if Live Updating is turned off. This script works for the other two playlists shown which have Live Updating turned on.
on run
tell application "iTunes"
--delete every track of playlist "Random Christian"
--delete every track of playlist "Mainstream"
delete every track of playlist "Random Country"
end tell
end run
I get the following error why I run the script with Live Updating activated.
error "iTunes got an error: every track of playlist \"Random Country\" doesn’t understand the delete message." number -1708 from every track of playlist "Random Country"
I am currently running iTunes 11.0.2 on OSX 10.8.2Thanks Winston Churchill. I was missing purchased content (cloud stuff) on my ATV2. The problem was with iTunes and many others were having similar problems. I asked them to fix iTunes so it worked, but they insisted on giving me outdated instructions that had no relevance to me. It is very frustrating dealing with them. I intentionally shortened my question when I asked it here just to find out what the directions they gave meant and you have answered that. Thanks again. This is the thread about missing shows:
https://discussions.apple.com/message/16486299#16486299 -
Complicated Scripting Question
Here is a little background before my question-
I have been making DVDs that basically consist of a main menu and a chapter menu. I have only one track in my project for the video. When the viewer selects "play video" from the main menu the entire video track plays then returns to the main menu. When they select a chapter from the chapter menu the same video track plays from whichever chapter marker they selected.
I wrote a short script so if a viewer watches the video from the main menu and presses the menu button they will be brought to the main menu, and if they are watching the video via selecting a chapter they will be returned to the chapter menu when the menu button is pressed.
I did this by having a prescript for each menu (mov GPRM 0, Current Item)
and assigning a script to the menu button (Jump Indirect GPRM 0).
But..now I have to make a DVD which is just like this except it must have double the menus (one set in english, one set in portuguese). They will both share the single (bilingual) video track.
So I need to make a first menu which lets the viewer select their language, once they select that they need to be brought to their language's main menu.
My first question is can I write a script so that once they are brought to a main menu based on what language they chose, whenever they press the title button they will be returned to this main menu and not the language selection menu or the wrong language's main menu.
My second question is how would I write a script so when a viewer presses menu while watching the video they will be returned to the last menu the came from (main menu or chapter menu) keeping in mind that there are 2 sets of each menu.
I'm still new to scripting and I'm having a hard time wrapping my head around all the different menus. If any one has the time to throw out any suggestions I would greatly appreciate it.
Powermac G4 Dual 1.42 Mac OS X (10.4.4)
Powermac G4 Dual 450 Mac OS X (10.3.9)You know, there's times when stories are just dandy for sorting the problem, and there's times for scripts... this seems like a time for scripting to me! Drew - your solution will work, but it seems so long...
What I would do is this.
From the very first menu make each button to select the language go to a script - and then on to the correct 'main' menu:
mov GPRM0, SPRM8
div GPRM0, 1024
Jump EnglishMenu If (GPRM0 = 1)
Jump FrenchMenu If (GPRM0 = 2)
Jump SpanishMenu If(GPRM0 = 3)
(I am assuming three buttons, and these three languages... you could have 36 different buttons and languages, of course.)
The next question is do you need to set up a particular audio stream? if so, I'd add it to the script above as a line before each jump statement.
Now that you have a value in a GPRM to identify the user choice, you can use it over and over. When you press the 'title' button, point it to a script which does this:
Jump EnglishMainMenu If (GPRM0 = 1)
Jump FrenchMainMenu If (GPRM0 = 2)
Jump SpanishMainMenu IF (GPRM0 = 3)
Of course the name of your menus will be different, just select the correct one when writing the script.
Now for the menu call - this is assuming that you have a series of sub menus within each language choice. All I would do is set another GPRM each time I go to a different menu. So, assuming we are on the main menu for English and want to go to a chapter selection menu in English, I would go via another script:
mov GPRM1, 1
Jump EnglishSubMenu
For each other menu I would go via a similar script but set a different value each time. That way we know the language (value in GPRM0) and the correct menu (in GPRM1)
The menu call goes to this script:
goto 4 If(GPRM0 = 1)
goto 7 If(GPRM0 = 2)
goto 10 If(GPRM0 = 3)
Jump EnglishSubmenu If(GPRM1 = 1)
Jump SecondEnglishmenu If(GPRM1 = 2)
Jump AnotherEnglishMenu If(GPRM1 = 3)
Jump FrenchSubMenu If(GPRM1 = 4)
Jump SecondFrenchMenu IF(GPRM1 = 5)
Jump ThirdFrenchMenu If(GPRM1 = 6)
Jump SpanishSubMenu If(GPRM1 = 7)
Jump SecondSpanishMenu If(GPRM1 = 8)
Jump ThirdSpanishMenu If(GPRM1 = 9)
The goto commands are looking to see which language you are in and the jump commands take you to the correct menu as long as you set these values up when you moved between the menus. This entire script could be simplified further, but as it is it serves to illustrate the process you need to go through.
There we have it, two main scripts and a bunch of stand-alone scripts to set values... you will be able to easily stay within a branching menu system for a single language with this. -
I'm trying to call this Flower class in another class called Garden, in which I created a new Flower by using a statement
private Flower lastflower;
and it's saying it cannot find the symbol - constructor Flower.
Can anyone tell me why and help correct this problem?
Below is the code for my Flower class.
Any help is really appreciated, it's for my Java class!
import objectdraw.*;
import java.awt.*;
* Write a description of class Flower here.
* @author (your name)
* @version (a version number or a date)
public class Flower
protected FilledOval dot;
protected FilledRect stem;
protected FilledOval petal1;
protected FilledOval petal2;
protected static final int boundary = 100;
protected RandomIntGenerator colorGen =
new RandomIntGenerator(0,255);
protected Color petalColor;
protected Boolean flowerContains=false;
private DrawingCanvas canvas;
public void changeColor(){
dot = new FilledOval(150,150,15,15, canvas);
dot.setColor(Color.YELLOW);
petalColor = new Color(colorGen.nextValue(),
colorGen.nextValue(),
colorGen.nextValue());
petal1.setColor(petalColor);
petal2.setColor(petalColor);
public void grow(Location point){
stem = new FilledRect (dot.getX()+3, dot.getY()+10, 10, 10, canvas);
stem.setColor(Color.GREEN);
if (dot.getY()>boundary){
dot.move(0,-4);
else{
petal1 = new FilledOval(dot.getX()-12, dot.getY()-25, 40,70,canvas);
petal2 = new FilledOval(dot.getX()-25, dot.getY()-10, 70,40,canvas);
dot.sendToFront();
stem.sendToBack();
petal1.setColor(petalColor);
petal2.setColor(petalColor);
public Boolean flowerContains(Location point){
if (petal1.contains(point)){
return true;
else if (petal2.contains(point)){
return true;
else if (dot.contains(point)){
return true;
else{
return false;
}I don't care how fucking urgent you think it is, it isn't to us. We will answer your question when and how we feel llike it. Have some manners and if you must, then bump your original post. Don't create another time wasting piece of crap!
Maybe you are looking for
-
HT1918 How can i take a credit card off my itunes account?
I cannot update any of my apps on my iPhone because it says there is a billing problem with a recent purchase. I've never purchased anything on my iPhone from the app store, but i have entered a credit card number on it. I was wondering how to get on
-
How to populate OIM Rules automatically ?
Hello experts, We have a requirement to populate set of values from a flat file to OIM Rule in 11g. Is there any API to do that operation ? Consider flat file has some 100 records of "jobCode" as follows 123 456 789 We need to create a single OIM rul
-
How can I use the Connection Pool with DB2
Hi All, I am facing the problem with the usage for the Connection Pool. I want to use DB2 via JNDI lookup. But when starting the Weblogic server, Error occured with the following message. <Error> <JDBC> <Cannot startup connection pool "MyJDBCPool" Ca
-
It seems that emails I send via Mail on my mac are stored only in Mail's Sent folder. These emails don't appear in the sent folder of Yahoo web browser, iPad Mail app, or the Y! Mail android app.. I've tested to see whether my emails are actually sen
-
Copying movies and films from external HDD to new Momentus XT
I have recently installed a new Momentus XT 500 drive on a mid 2010 macbook pro 13" Drive model - ST95005620AS revision - TD24 Drive seems to be working fine with very fast boot times ect. However, if I copy across movies from my external drive to t