Urgent : Search a Demo with B2B and Ebiz integration

Hi all,
I'm in a search for a Demo with a scenario for outbound or inbound flows, integrating Oracle B2B and Ebiz, if the Ebiz Adapter is used it will be great.
Thanks for your help.

If you are an Oracle employee then please get in touch with B2B PM's otherwise drop a note to my id (in my profile)
Regards,
Anuj

Similar Messages

Urgent: Search for user with 'ß' character failed.

Hi all,
I have problem for searching the user with 'ß' character included in the name of user in Identity Management.
When nothing is specified in the search criteria, then the user is displayed.
When the name of user without 'ß' is given in the search criteria, then also the user is displayed.
But when the name is given with 'ß' in search criteria, the user is not recognized and cannot be displayed.
'ß' is the German Character.
Please help me out, why the user is not recognized with the character 'ß' in the search criteria.
Thanks in Advance.
Regards,
Yogita.

Hi,
You can ofcourse use ß and all other chars in your search.
It makes no sence that you can create users with these chars, but cannot search using them.
I tried to create user with char ß and also could search with this char. So it is only a local problem on your server.
Is your UME connected with LDAP or DB? My UME where I tested is DB.
So dont give up, open an OSS message with SAP for a solution and also update this thread if you find an answer.
Regards,
Praveen Gudapati

Problem with PRI and Nortel Integration

We have a Nortel Option 81C connected to a 3825 MGCP gateway and we had a weird problem with it. The PRI looked fine from CallManager's perspective, but the PBX was showing that the first nine channels were in a Far End Make Busy state (FE MBSY) instead of being in IDLE state like CCM thought.
I did some checking around and found a weird "fix" for the problem that involved enabling and then disabled D-channel service messages on the PBX, but I'd like to find out more about this problem. I got the fix from a guy who has a LOT of experience with Nortel and with Cisco, and he said that 99 times out of 100, an FE MBSY problem like this is going to be because of the Cisco side, not the Nortel side.
I just did a bug search through CCM 4.1(3) and IOS 12.4(8) and I didn't see anything about D-channels being incorrectly reported as unavailable on PRI.
Have any of you ever heard of something like this?
Thanks!
John

John,
Our 81Cs are long gone, but the only ISDN switchtype that worked flawlessly for us was NI. We tried DMS100, and saw your problem. Nortel sees NI as a carrier side protocol and will not allow an inbound NI call to tandem through to another NI PRI. This forced us move all PSTN PRIs to CCM gateways early in out migration, but worked out well. I believe QSIG will also work, but it was a $20k upgrade for our PBXs, so was not an option.
Dave

Agreement Configuration for B2B and BPEL integration

I configured a listening channel on B2B to pick up custom xml files from a folder. I have a BPEL SOA composite that has a B2B adapter as a service to receive the custom xml files from B2B through direct integration. Since B2B has to send the xml file only to a SOA composite and not to another trading partner, how do I configure the agreement in B2B?
Appreciate your help.

Hi Naresh and Anuj,
Thanks a lot for your responses.
This is the problem that I am facing now.
As per your suggestion, I deployed an inbound agreement that specifies that the Sender is the Other TP (EPCOD) and the Receiver is the Host TP EPCOZ). Also I left the channel for the Host TP blank in the agreement - did not select anything from the drop down.
When I drop the file into the folder specified in the internal listening channel, with the following naming convention (EPCOZ_PayableInvoice_1.0_Custom_1234.xml), the file gets picked up, but I get the following error message:
Description: Agreement not found for trading partners: FromTP EPCOZ, ToTP EPCOZ with document type PayableInvoice-1.0-OUTBOUND.
For some reason, it thinks that both the sender and the receiver are the same. If I reverse the file name as EPCOD_PayableInvoice_1.0_Custom_1234.xml, then it thinks that the From TP is EPCOZ and the To TP is EPCOD.
Any ideas? Appreciate your help.
Thanks.
Raja

OTL with Projects and Payroll Integration - Actual Costing

How does the costing work when we have the OTL integrated with Projects and Payroll? (R12.2.4 functionality - Actual Costing)

As explosion process is based on elements, it only applies to payroll. You can use this functionality with Projects and Payroll Timecard Layout, but project will get the non exploded hours.
--Shiv

What's up with Webservices and BPM integration?

According to http://e-docs.bea.com/wli/docs70/design/intarch.htm, table
3-1, webservices are a key component of the Integration architecture,
which:
"Provides sample code to support WebServices integration using
WebServices technologies
such as UDDI, WebServices Description Language (WSDL), and Simple Object
Access
Protocol (SOAP). WebLogic Integration provides the ability to invoke a
WebService
from a BPM workflow, enable a BPM workflow as a WebService, and to
enable the
Application View as a WebService. For an introduction to WebLogic
WebServices,
see the WebServices and XML Tech Track in the BEA dev2dev Online at the
following
URL:
http://dev2dev.bea.com/index.jsp"
The only thing which comes close to this description is the BPM Plugin
for webservices, which is alpha code for WLI 2.1. To deploy this on 7, I
have only seen a message here describing loosely what to do.
So is this how we are expected to use webservices together with
Integration? With alpha code that requires tweaking to work with the
current version? Or am I missing something vital? The quote from the
docs suggest "sample code", however the webservices plugin is not
provided in source, so I don't see how it qualifies as sample code?
Somehow I also don't quite understand how "sample code" can be construed
as a "key component".
So what's up with webservices and Integration?
-Lasse
(only speaking for myself in news!)

Your comment about the lacking of web services in WLI is correct
and a fundamental issue I have signalled to BEA already many
months ago. I even followed the BPM course to make sure I did
not miss an important point. The BPM course did not deal with
webservices because it is not available. But the fundamental remark goes further
because webservices also have a dynamic
interface WSCI to behave within a choreography of webservices
within a business process. BPM is still mainly workflow based
and intracompany. This is not what is expected as business
processes which are collaborative and a new paradigm alternative for applications
conform BPML-WSCI or BPEL4WS-ws transaction.
I still wait from BEA a confirmation that webservices and collaborative business
processes according to (at least) one of
the above standards will be included within the next version of weblogic enterprise
platform due end of March 2002.
Kind regards,
Paul Meurisse
Email : [email protected]

REPORT WITH SALES AND PRODUCTIN INTEGRATION?

HI,
HERE I NEED TO DISPLAY THE SALES AND PRODUCTION INTEGRATED (FOR MAKE TO STOCK) LIST BY DAY WISE ,I AM NOT ABLE TO FIND THE TABLES FOR THAT.
HERE LIST HEADER IS FOLOWING.
MATERIAL CODE, MATERIAL DISCRIPTION, PRODUCTION QTY, PROD. VALUE, SALES(BILLING QTY, SALES(BILLING) VALUE.
AND THAT LIST TOTAL PRODUCTION VALUE SHOULD EQUAL TO THAT PARTICULAR DAY TOTAL PRODUCTION VALUE,
AND THAT LIST TOTAL SALES(BLIING) VALUE SHOULD EQUAL TO THAT PARTICULSR DAY TOTAL SALES(BILLING) VALUE.
PLZ HELP OUT FROM THIS,
REWARDS IN ADVANCE....
REGARDS,
NAVEEN

Have you tried the txn code MC-Q or the report program RMCV0500.

Can somebody help me with Siebel and Fusion Integration

Hi,
I want to integrate Siebel with BPEL.
I can't use the Oracle AS adapter available for Siebel for integration purpose.
I have to integrate using web services.
Can somebody help me out with any document of integration BPEL with Siebel using WebServices??

Hi,
Find attached the link/note for integration of BPEL with Siebel, hope this will be useful
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28999/intro.htm
Oracle® Application Server
Adapter for Siebel User's Guide
10g Release 3 (10.1.3.1.0)
B28999-01
Rgds,
Muru

Search on text with diacritic, and case insensitive

Hello to all,
I'm using this condition in a query on XML:
field[contains(@value, "gangesa" )
If @value= 'Gaṅgeśa' I'd like to get this record also by using the word: "gangesa" So I need to map:
ṅ = n
ś = s
And do it in case insensitive. Somebody can help me?
Thank you,
Cristian

ALTER SESSION SET NLS_COMP=LINGUISTIC;
ALTER session set nls_sort='binary_ai'; -->accent insensitive
binary_ci -->case insensitive.
with t as
(select 'Gageśa' col1 from dual union all
select 'GAgEśa' from dual union all
select 'gagEśA' from dual union all
select 'not Gageśa' from dual
select * from t where col1 like '%gagesa';
Gagesa
GAgEsa
gagEsA
not Gagesaand do the search.
Edited by: PhoenixBai on Aug 25, 2010 10:14 PM

Training and event mangement Search functionality, linkage with ESS and MSS

Hi ,
I am implementing TEM (training and event management).. and for frontend application of TEM .. we r using HCM_LEARING BSP application.... but search functionlity is not working.. i checked with EP guy... he told me that TREX is not installed..
can u please tell me .. is TREX required for TEM search functionlity ?
We tried to check through SE80 and then selected Search page and tested search functionlity, there also it is not working..
How do we integrate TEM with MSS also.. client required standard functionlity. I am not getting any data for TEM in MSS?
Kindly help me..
Thanks and Best Regards
Puneet

HI,
TREX is a search engine which is required for candidate searching.
contact your basis people they will help you out in installing it.
it works with RFCs' better you touch base abap wdp consultant also.
cheers
rafi

URGENT HELP IS NEEDED WITH IMOVIE and MY SONY HD CAMERA HDR XR100E

Hi there Fellow Mac Users.
ok heres the situation..
i bought the brand new sony HDR xr100E Video camera and as soon as i connetced it a few weeks back to my Apple Mac IMOVIE opened automatically and i was able to edit the movie, add sound, titles etc.
Now last week there was a IMOVIE Update launched via software update and i downloaded it and now since then my Sony Cameara does not work with IMOVIE as imovie does not recognise it any more.
when ever you go to the option to import from cameara it does not find the camera but instead it opens the I sight Camera on the Macbook.
i have uninstalled the operating system, reinstalled, i have uninstalled the imovie application, reinstalled and still nothing.
Can some one , anyone please help me ASAP im desperate.. ow and PS has anyone else exeprienced this same issue since the Upgrade?

Thanks. What we will be using it for is mainly videoing children and family and we would like the 1080 HD but not necessarily hooked on the tape system. A hydrid might be something... like the BD and HDD. I found the Sony autofocus a bit slow at times which we would like to improve and we would like to have something that easily allow some pre-editing before getting to the FCE (I mean deleting unwanted clips etc). Also preferably not too large and heavy...
Hope that makes the advise easier. Thanks again.

Searching PDF's with Sharepoint and Adobe's iFilter (Reader 9 install bug?)

Hi,
The suggested way to get the latest iFilter for PDF's is to install the latest Adobe Reader version 9. However I think that there is a bug in the install process -anyone agree?
The Adobe web site says that the iFilter that comes with Reader version 6,7,8 was the same and that the new iFilter that comes with 9 is an improved version.
My hunch is that the installer for v9 places in the new iFilter, but incorrectly points the file extensions in the registry to the old v6 program, that on a fresh install don't exist.
ie in Regedit - the Gather in Microsoft shared tools should point to
E8978DA6-047F-4E3D-9C78-CDBE46041603, but instead is set up to point to
4C904448-74A9-11D0-AF6E-00C04FD8DC02. (which is iFilter v6)
There appears to be a lot of support on the web for the iFilter v9 not working and people falling back to the v6 one. The Adobe ITMatters blog saying "You may then need to do an additional step of registering that iFilter with SharePoint, but it's easy to do that is not quiet right, as it is not easy.
Regards
S

Thanks for the document link.
I tried manually updating the DocIcon.xml file and adding OpenControl="AdobeAcrobat.OpenDocuments" stops the web client from being able to open pdf's.
I have checked IIS and the WebDAVModule is not present.
The one thing I have noticed is that the iFilter is version 9 is there a version 10 and would this be causing the problem?
Thanks

Can I create a single captivate 7 software demo with captions and have multiple languages versions

First Timer here; we are a small but global company and we would like to create training videos for our worldwide customers. What we want is to create a video once with English captions and then use the exact same video over and over but changing the language to German, Spanish, French and more each time we save it.
Example: we create a video demonstrating how to perform a specific task and save it in English. Then, before we close this "English" file, we would like to save it in German, then save it again in French, etc. The idea is not to have to open the software and repeat the "click-by-click" action for each language; just perform the software navigation once but somehow change the language displayed in the caption balloons for each language.
Thank you for any assistance,
denny

Hi there
Certainly you will be able to click File > Save As and save as all the different languages.
After you do that, you need to open each respective file and click File > Export > Project Captions and Closed Captions. This action should create a Microsoft Word document that may then be opened and translated. Then it's saved back and you click File > Import > Project Captions and Closed Captions to change the verbiage to the desired language.
Cheers... Rick

Resource Utilization with TFS and PS Integration

We've done Team Foundation Server 2012 and Project Server 2013 Integration. We're using Agile Model i.e. creating users stories and tasks at TFS side and synchronizing with Project Server. The synchronization is done correctly. Now we want to get
resource utilization report but not coming correctly. I observed that all the tasks are getting added in project server with start date as the project start date of 28 Dec 14. Even if I work on any of the tasks today (30 Jan 15) and update the remaining
and completed hrs on TFS side, the hrs are updated on Project server on 28 Dec 14.
So the resource working today on TFS is shown as worked on Project Server on 28 Dec. I want to see a report where whatever hrs a resource filled in TFS today the project server should show utilization of him for today only and not in past.
Thanks
Dinesh

Hi Dinesh,
I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience and thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help with PHP and FLEX integration

Hello i was wondering how to use php sessions with flex, i
need a way to have secure connections between flex and php.
I am using a script i made to pass mysql commands/results
between them, and i am currently passing the php session id with
the transactions. But if anyone gets a hold of a valid php session
id then they will be able to use it. Possibly using flex server to
have secure transactions?
If i host both the flex created swf and the php file on a
https server will it "talk" securely?
thanks lots

You may get a quicker answer from Cartweaver's newsgroups.
http://www.cartweaver.com/support/
They're usually quite prompt and helpful.

Urgent : Search a Demo with B2B and Ebiz integration

Similar Messages

Maybe you are looking for