Urgent: Simple packages query.
I have two .java files (Assign1.java, Support.java) in the same package (cis.unisa) and need an instance of Assign1 to access a class in Support.java (FileAccess). I thought this would be simple but not so far.
I tried just FileAccess.method() but I get 'cannot resolve symbol. symbol: variable FileAccess' I've also tried unisa.cis.FileAccess.method() and importing unisa.cis.* but I get the same message in all. It seems as if it just can't find the FileAccess class but it is there.
Any help would be greatly appreciated, A.S.A.P. thanks.
Don't flag your question as urgent, even if it is for you. Claiming urgency is very likely to be counter-productive: most forum regulars will simply ignore such messages as rude and selfish attempts to elicit immediate and special attention.
Besides, unless the entire Bolivian army is about to chase you over the edge of a cliff, your problem probably isn't as urgent as you think. :o)
Similar Messages
-
[SOLVED] Package-Query build error
I'm trying to get my new Arch system setup, and I'm having trouble getting Yaourt installed. I can't seem to get package-query to build successfully. I have base-devel installed, and I've followed the instructions in the wiki on installing AUR packages. After running "makepkg -s" from the package-query directory it seems to go fine until the end, where I see this output.
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in package().
Aborting...
And that's it. Not sure what I'm missing here.
Thanks.
Last edited by x371322 (2012-05-31 08:11:21)I take that back, after another look I did notice a couple of errors. They're near the bottom of the output. I'm sure it's something simple, and I'm probably going to end up looking like an idiot , but anyway, here's the entire output.
==> Making package: package-query 1.0.1-1 (Thu May 31 03:21:18 EDT 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading package-query-1.0.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 361k 100 361k 0 0 152k 0 0:00:02 0:00:02 --:--:-- 177k
==> Validating source files with md5sums...
package-query-1.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting package-query-1.0.1.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
configure: WARNING: Libtool does not cope well with whitespace in `pwd`
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for yajl_free in -lyajl... yes
checking for gawk... (cached) gawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.26.0
checking for libcurl >= version 7.19.4... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for git... no
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
package-query:
Build information:
source code location : .
prefix : /usr
sysconfdir : /etc
conf file : /etc/pacman.conf
localstatedir : /var
database dir : /var/lib/pacman/
compiler : gcc
compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
package-query version : 1.0.1
using git version : no
git ver :
Variable information:
root working directory : /
aur base url : http://aur.archlinux.org
make all-recursive
make[1]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
Making all in src
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
mv -f .deps/aur.Tpo .deps/aur.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
alpm-query.c: In function 'alpm_pkg_get_realsize':
alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
util.c: In function 'ltostr':
util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'itostr':
util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'concat_backup_list':
util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'string_fcat':
util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/util.Tpo .deps/util.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
mv -f .deps/color.Tpo .deps/color.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
mv -f .deps/package-query.Tpo .deps/package-query.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,--hash-style=gnu -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
Making all in doc
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/x371322/AUR Builds/package-query/pkg/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/x371322/AUR Builds/package-query/pkg/usr/bin'
libtool: install: /usr/bin/install -c package-query /home/x371322/AUR Builds/package-query/pkg/usr/bin/package-query
/usr/bin/install: target 'Builds/package-query/pkg/usr/bin/package-query' is not a directory
make[2]: *** [install-binPROGRAMS] Error 1
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/src'
Making install in doc
make[1]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/x371322/AUR Builds/package-query/pkg/usr/share/man/man8"
/usr/bin/install -c -m 644 package-query.8 '/home/x371322/AUR Builds/package-query/pkg/usr/share/man/man8'
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[1]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1/doc'
make[1]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make[2]: Entering directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/x371322/AUR Builds/package-query/src/package-query-1.0.1'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in package().
Aborting...
I appreciate the help guys. -
Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thankstry to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt -
[SOLVED] cannot install package query
I want to install yaourt, but I can't seem to install package query. I acquired the tarball from here and followed all the steps here
[maarten@maarten ~]$ cd ~/src
[maarten@maarten src]$ tar -zxvf package-query.tar.gz
package-query/
package-query/PKGBUILD
[maarten@maarten src]$ cd ~/src/package-query
[maarten@maarten package-query]$ makepkg -s
==> Making package: package-query 1.0.1-1 (Sun Jul 8 11:09:03 CEST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading package-query-1.0.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 361k 100 361k 0 0 205k 0 0:00:01 0:00:01 --:--:-- 226k
==> Validating source files with md5sums...
package-query-1.0.1.tar.gz ... Passed
==> Extracting Sources...
-> Extracting package-query-1.0.1.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop
checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking ctype.h usability... yes
checking ctype.h presence... yes
checking for ctype.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for alpm_version in -lalpm... yes
checking for yajl_free in -lyajl... yes
checking for gawk... (cached) gawk
checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.26.0
checking for libcurl >= version 7.19.4... yes
checking whether libcurl is usable... yes
checking for curl_free... yes
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for git... git
checking for .git/... no
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing po-directories commands
package-query:
Build information:
source code location : .
prefix : /usr
sysconfdir : /etc
conf file : /etc/pacman.conf
localstatedir : /var
database dir : /var/lib/pacman/
compiler : gcc
compiler flags : -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2
package-query version : 1.0.1
using git version : no
git ver :
Variable information:
root working directory : /
aur base url : [url]http://aur.archlinux.org[/url]
make all-recursive
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
Making all in src
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT aur.o -MD -MP -MF .deps/aur.Tpo -c -o aur.o aur.c
mv -f .deps/aur.Tpo .deps/aur.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT alpm-query.o -MD -MP -MF .deps/alpm-query.Tpo -c -o alpm-query.o alpm-query.c
alpm-query.c: In function 'alpm_pkg_get_realsize':
alpm-query.c:486:9: warning: ignoring return value of 'chdir', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/alpm-query.Tpo .deps/alpm-query.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT util.o -MD -MP -MF .deps/util.Tpo -c -o util.o util.c
util.c: In function 'ltostr':
util.c:532:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'itostr':
util.c:525:11: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'concat_backup_list':
util.c:480:12: warning: ignoring return value of 'asprintf', declared with attribute warn_unused_result [-Wunused-result]
util.c: In function 'string_fcat':
util.c:342:11: warning: ignoring return value of 'vasprintf', declared with attribute warn_unused_result [-Wunused-result]
mv -f .deps/util.Tpo .deps/util.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT color.o -MD -MP -MF .deps/color.Tpo -c -o color.o color.c
mv -f .deps/color.Tpo .deps/color.Po
gcc -DLOCALEDIR=\"/usr/share/locale\" -DCONFFILE=\"/etc/pacman.conf\" -DROOTDIR=\"/\" -DDBPATH=\"/var/lib/pacman/\" -DAUR_BASE_URL=\"http://aur.archlinux.org\" -DHAVE_CONFIG_H -I. -I.. -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -MT package-query.o -MD -MP -MF .deps/package-query.Tpo -c -o package-query.o package-query.c
mv -f .deps/package-query.Tpo .deps/package-query.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -lcurl -Wl,-O1,--sort-common,--as-needed,-z,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lyajl -lalpm
libtool: link: gcc -D_GNU_SOURCE -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o package-query aur.o alpm-query.o util.o color.o package-query.o -lcurl -lyajl -lalpm
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making all in doc
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/bin"
/bin/sh ../libtool --mode=install /usr/bin/install -c package-query '/home/maarten/src/package-query/pkg/usr/bin'
libtool: install: /usr/bin/install -c package-query /home/maarten/src/package-query/pkg/usr/bin/package-query
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/src'
Making install in doc
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/maarten/src/package-query/pkg/usr/share/man/man8"
/usr/bin/install -c -m 644 package-query.8 '/home/maarten/src/package-query/pkg/usr/share/man/man8'
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1/doc'
make[1]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Entering directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
make[1]: Leaving directory `/home/maarten/src/package-query/src/package-query-1.0.1'
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: package-query 1.0.1-1 (Sun Jul 8 11:09:18 CEST 2012)
[maarten@maarten package-query]$ dir
PKGBUILD package-query-1.0.1.tar.gz src
package-query-1.0.1-1-i686.pkg.tar.xz pkg
[maarten@maarten package-query]$ sudo pacman -U package-query-1.0.1-1-i686.pkg.tar.xz
Password:
loading packages...
error: 'package-query-1.0.1-1-i686.pkg.tar.xz': invalid or corrupted package (PGP signature)
I already reran pacman-key --init and pacman-key --populate archlinux after removing the allready acquired signatures (/etc/pacman.d/gnupg). But it keeps returning the same error.
Do I need to add another key manually to install packages manually from the AUR?
Last edited by maartennnnnnn (2012-07-08 09:44:01)I edited your post to change the \[quote\] tags to \[code\] tags - it makes for a much easier to read post
https://wiki.archlinux.org/index.php/Fo … s_and_Code
Two options are to change your SigLevel or sign your own key... -
Simple Spatial Query caused ORA-03113: end-of-file on communication channel
I try to run a simple spatial query to find the ID's which inside the specified circle
select n.ID,n.FEATURE_ID
from NC_MANGROVE n
where sdo_relate(n.shape,
mdsys.sdo_geometry(2003,null,null,
mdsys.sdo_elem_info_array(1,1003,4),
mdsys.sdo_ordinate_array(848948,834940,848908,834980,848908,834900)),
'mask=ANYINTERACT querytype=WINDOW')='TRUE';
but it end up of ORA-03113: end-of-file on communication channel
Then I try another query, which I think do the similar thing
select n.ID,n.FEATURE_ID
from NC_MANGROVE n
where sdo_within_distance(n.shape,
mdsys.sdo_geometry(2001,null,mdsys.sdo_point_type(848908,834900,null),null,null),
'distance=40')='TRUE';
but same error occurs.
Is it the SQL*net configure problem. I am using Oracle 8.1.7 for both client and server.
Please help
TommyDoes SDO_FILETER Queries work fine? If so there is already reported bug and patch for that on Metalink site. Get all the patches for 8.17 spatial and install those.
-
A simple select query taking forever
Hi All
I am not able to execute a simple select query, I traced my session and here is TKPROF of that Trace.
Solaris 8 , Oracle 10.2.0.4.0
TKPROF: Release 10.2.0.4.0 -
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Trace file: 502_ora_28260.trc
Sort options: default
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
select OBJECT_ID , ORACLE_USERNAME , SESSION_ID
from
v$locked_object
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.03 32.86 0 0 6 0
total 3 0.03 32.86 0 0 6 0
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS
Rows Row Source Operation
0 MERGE JOIN (cr=0 pr=0 pw=0 time=60 us)
0 SORT JOIN (cr=0 pr=0 pw=0 time=58 us)
0 MERGE JOIN (cr=0 pr=0 pw=0 time=42 us)
1 SORT JOIN (cr=0 pr=0 pw=0 time=2443 us)
1105 FIXED TABLE FULL X$KSUSE (cr=0 pr=0 pw=0 time=1204 us)
0 SORT JOIN (cr=0 pr=0 pw=0 time=41 us)
1001 FIXED TABLE FULL X$KTCXB (cr=0 pr=0 pw=0 time=16132 us)
0 SORT JOIN (cr=0 pr=0 pw=0 time=0 us)
0 FIXED TABLE FULL X$KTADM (cr=0 pr=0 pw=0 time=0 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
buffer busy waits 34 0.97 32.83
SQL*Net break/reset to client 1 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.03 32.86 0 0 6 0
total 3 0.03 32.86 0 0 6 0
Misses in library cache during parse: 1
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 2 0.00 0.00
SQL*Net message from client 1 19.00 19.00
buffer busy waits 34 0.97 32.83
SQL*Net break/reset to client 1 0.00 0.00
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 0 0.00 0.00 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 0 0.00 0.00 0 0 0 0
Misses in library cache during parse: 0
1 user SQL statements in session.
0 internal SQL statements in session.
1 SQL statements in session.
Trace file: 502_ora_28260.trc
Trace file compatibility: 10.01.00
Sort options: default
0 session in tracefile.
1 user SQL statements in trace file.
0 internal SQL statements in trace file.
1 SQL statements in trace file.
1 unique SQL statements in trace file.
64 lines in trace file.
32 elapsed seconds in trace file. There is nothing fishy in alert logs... Please guide
ThanksThere it is TOP
$ RUMPSHAKER>top
load averages: 6.63, 7.45, 7.88; up 33+12:02:33
3631 processes: 3616 sleeping, 5 zombie, 1 stopped, 9 on cpu
CPU states: 58.6% idle, 18.2% user, 23.2% kernel, 0.0% iowait, 0.0% swap
Memory: 192G phys mem, 92G free mem, 96G swap, 96G free swap
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
13752 ora0005 1 19 0 4243M 4219M sleep 5:21 62.78% oracle
17758 ora0005 1 25 0 1174M 1156M cpu 1:05 37.12% oracle
17923 root 1 57 0 18M 14M sleep 689:07 13.59% ecap_monitor
20777 root 12 58 0 14M 13M sleep 864:33 11.55% OracleAgent
18884 ora0004 1 1 0 830M 813M sleep 0:01 9.54% oracle
12070 ora0004 61 58 0 320M 315M sleep 28.5H 8.29% emagent
20347 root 16 59 0 33M 25M sleep 26.0H 6.34% caiUxsA2
17949 ist0005 1 53 0 7984K 4984K cpu 0:00 3.93% top
1 root 1 59 0 2912K 1288K sleep 32.2H 3.75% init
15035 ora0001 1 46 0 32M 22M sleep 166:43 2.98% tnslsnr
5748 ora0004 11 54 0 516M 496M sleep 389:37 2.78% oracle
20567 ora0004 1 55 0 27M 22M sleep 0:00 2.69% sqlplus
6730 ora0001 1 33 0 632M 616M sleep 0:06 2.67% oracle
20557 ora0004 1 56 0 27M 23M sleep 0:00 2.53% sqlplus
5355 ora0005 1 59 0 1154M 1137M sleep 0:04 2.46% oracleand VMSTAT 2 5
$ RUMPSHAKER> vmstat 2 5
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s1 s2 sd in sy cs us sy id
6 8 0 143125576 74272080 4628 24012 488 150 149 0 0 4 4 -2 0 25037 192698 65249 38 26 36
1 3 0 162803992 95246464 1989 6989 0 4 4 0 0 6 6 0 0 9170 57822 26434 8 13 79
1 7 0 162801352 95240296 3043 15633 4 9737 9682 0 0 0 0 0 0 11277 73516 38200 16 16 68
3 10 0 162801560 95227920 3326 12729 16 16862 16774 0 0 1 1 0 0 11377 86054 44758 16 17 68
1 10 0 162784520 95186488 9638 48359 24 11682 11626 0 0 13 13 0 0 13484 149366 44205 23 29 47 -
Simple spatial query with different SRID
Can anyone help me with just a real simple spatial query with different SRID.
Here is the error i get when i perform the query:
AND SDO_RELATE(A.geometrie_point, B.GEOMETRIE_POLYGONE, 'mask=anyinteract querytype=WINDOW') = 'TRUE'
ERROR at line 4:
ORA-00604: error occurred at recursive SQL level 1
ORA-13207: incorrect use of the [IN COMPATIBLE BOUNDS in SDO_RELATE] operator
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
ORA-06512: at line 4Hi,
I am using 8.1.7.2 and i have the lattest spatial patch.
From the start i had different SRID. The only thing i changed was the bounds of the coordinate system.
I reset my bounds of the coordinate system with SRID 8307 to -180,
180 in X (longitude), and -90,90 in Y (latitude) to see if the query window geometry
(geom2) will be transformed to the coordinate system of the layer geometries (geom1)
Her is the content of the user_sdo_geom_metadata :
GIS_PCP GEOMETRIE_POINT
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -5800000, 3600000, .00000005), SDO_DIM_ELEMENT('Y', 3516000, 6000000, .00000005))
82227
GIS_TEST GEOMETRIE_POLYGONE
SDO_DIM_ARRAY(SDO_DIM_ELEMENT('X', -180, 180, .00000005), SDO_DIM_ELEMENT('Y', -90, 90, .00000005))
8307
Here is my query :
select /*+ ordered */ A.no_point
from gis_pcp A, gis_test B
WHERE SDO_RELATE(A.geometrie_POINT, B.GEOMETRIE_POLYGONE, 'mask=anyinteract querytype=WINDOW') = 'TRUE';
Here is my result :
WHERE SDO_RELATE(A.geometrie_POINT, B.GEOMETRIE_POLYGONE, 'mask=anyinteract querytype=WINDOW') = 'TRUE'
ERROR at line 3:
ORA-00604: error occurred at recursive SQL level 1
ORA-13207: incorrect use of the [IN COMPATIBLE BOUNDS in SDO_RELATE] operator
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
ORA-06512: at line 4
If i change the bounds of GIS_TEST to the exact bouns of GIS_PCP then i dont have the error message above and i have correct results. Do i have the adjust the bounds of every layer to fit the biggest bound? -
Simple SQL Query and Parameters and LOV
Newbie and trying to work thru building a simple sql query with a single table query and use a parameter and lov.
Can anyone point me to an example.
simple query:
select cust_id, name_desc, name_add1, name_add2, name_city
from customer_table
where cust_id = :cust_parm
This works in straight sql and in the query builder by prompting for the customer ID. When building a parameter using LOV or search, it doesn't seem to detect the variable.
Thanks..
DDIf you are using version 11g, then as soon as you save the query in the data model, it should notice the parameter and ask if you want to add the parameter to the data model. What version of BIP are you using?
What happens if you exclude the parameter from the query and simply hard-code the criteria? Can you generate XML data?
From your wording, it sounds like you're trying to create a parameter from the LOV dialog. LOVs and parameters are totally distinct. After each are created separately, then you configure the parameter to use the LOV. -
Can anyone help me with just a real simple spatial query. All I want to do is identify which police district a parcel falls in. I have two shapefiles police and parcel and I know I should do an relate but I just can't figure out to get the answer back. Can anyone help me.
MattHere is an example to try...
select pd.district_name
from parcels p,
police_district pd
where p.apn = 'XXXXXXXX'
and mdsys.sdo_relate
(p.shape,pa.shape,'querytype=window mask=anyinteract') = 'TRUE';
Note that the table names have aliases (p and pd).
I am just learning Oracle Spatial too but this example should work.
Tom Elder
City of Phoenix
[email protected] -
Simple SQL query statement is needed
I need a simple SQL query to fetch records which is existed in all the departments.
for example: i want to list the employees which are existed in each and every department.. not sure how should i get those.. will anyone help me please.. thanks in advanceI think it would be wise to go to the following training:
Oracle Database <version> : Introduction to SQL
You will get the information you are looking for in five days. You can go find a tutorial on ANSI SQL, as advised by this board for free, to fix your immediate problem with a simple query. But, I personally recommend a more formal class specific to Oracle, as you will also get information about PL/SQL, and you get the benefit with working with other DBA/programmers when you are learning. This will solve your immediate issue, and any future issues with the language.
You can find it in the Education section of the Oracle website. -
Can not execute a simple update query with ms access
Hi
I am trying to execute a simple update query , this is the code I am running : I get no exeptions but the db is not being updated .
When I copy my query into access it works !
The table / columns are spelled correctly and I am able to execute select queries.
can anyone figure out what is going on
Thanks shahar
public static void main(String[] args) {
MainManager mainManager = MainManager.getInstance();
Log log = Log.getInstance();
try {
log.writeDebugMessage("befor executing query");
//stmt.executeUpdate("update trainee set Trainee_Name = 'shahar&Rafi' where Trainee_Id = 1 ");
//stmt = null ;
PreparedStatement stmt1 = con.prepareStatement("UPDATE Trainee SET Trainee_Name =? WHERE Trainee_Id =?");
String name = new String("Shahar&Rafi");
int Id = 1 ;
stmt1.setString(1,name);
stmt1.setInt(2,Id);
System.out.println(stmt1.toString());
stmt1.execute();
log.writeDebugMessage("After executing query");
catch (SQLException e ){
System.err.println("SQLException: " + e.getMessage());
}Hi All,
got the problem solved at last.
first, in the SQL string all the values must be within " ' "
for example:
INSERT INTO Trainee(Trainee_Id , Trainee_password , Trainee_Address, Trainee_Name , Trainee_Phone , Trainee_Gender , Trainee_SessionTime , Trainee_Purpose , Trainee_HealthStatus , Trainee_StartDate , Trainee_Birthday) VALUES (6,'333','hhhh','rafi',048231821,true,63,4,true, ('Feb 22, 2002'), ('Feb 22, 2002'))
second and more important,
a 'dummy' sql select query must be performed after an update query
example for code:
try{
DB.MainManager.getInstance().ExecuteUpdateQuery(A);
DB.MainManager.getInstance().getStatement().executeQuery("SELECT * FROM Trainee");
where A is the update query. -
Error: target not found: package-query =1.0 although I have it
I used to work on Arch but it was installed for me by a friend, now I decided to install it on my own and it was a success! But when I tried installing yaourt it didn't work. I know that it needs package-query so I installed it, but when I try to build yaourt it fails..
[clairka@clairka yaourt]$ makepkg -s
==> Making package: yaourt 1.3-1 (Thu Aug 22 00:37:27 UTC 2013)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for clairka:
error: target not found: package-query>=1.0
==> ERROR: 'pacman' failed to install missing dependencies.
So I tried to rebuild package-query
[clairka@clairka package-query]$ makepkg -s
==> ERROR: A package has already been built. (use -f to overwrite)
Even if I use -f to overwrite I get always the same output. Does anybody know how to fix this? I was really used to use yaourt to install packages from AUR. Thanks.
Last edited by clairka (2013-08-21 22:47:37)clairka wrote:Ahh... silly me, thanks a lot! And now I can delete the tar.xz file, right?
Sure. -
How to make a simple package the easy way
i want to make a very simple package that can be installed with pacman.
i just want to copy a few files from the package to the /usr directory.
i read the wiki on this but it seems pretty "overkill" for the thing i want to do.
perhaps someone can give me a little hint how this can be done...It's not overkill - that's about all I can say.
If it doesn't depend on anything and is hugely simple the it can be very short e.g.:
# Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
pkgname=ibmonitor
pkgver=1.3
pkgrel=1
pkgdesc="Interactive linux console application which shows bandwidth consumed and total data transferred on all interfaces."
url="http://ibmonitor.sourceforge.net/"
license=""
depends=('perl')
source=(http://dl.sourceforge.net/sourceforge/ibmonitor/$pkgname-$pkgver.tar.gz)
md5sums=('6f37ee0b00b62822823cdbabc9d7419e')
build() {
cd $startdir/src/$pkgname
install -D -m755 ibmonitor $startdir/pkg/usr/bin/ibmonitor
That is a "perfect" PKGBUILD, it doesn't get much simpler than that -
A simple sub query
I have a table called instrument with a field called id_inst
instrument
id_inst
0000203
There is another table called instrument_xref
instrument_xref
id_inst id_inst_xref
0000203 890000
I want to use a sub query that will give the output
id_inst id_inst_xref
0000203 890000
The subquery I am using is not working
Select i.id_inst,insx.id_inst_xref
from instrument i,instrument_xref insx
where i.id_inst = (Select ???
Can some one please help?You don't need a subquery :
SQL> Select i.id_inst,insx.id_inst_xref
2 from instrument i,instrument_xref insx
3* where i.id_inst = insx.id_inst;anyway :
SQL> Select i.id_inst,insx.id_inst_xref
2 from instrument i,instrument_xref insx
3* where i.id_inst = (select id_inst from instrument_xref); -
[SOLVED] makepkg package-query
I'm trying to make the package for package-query so I can install yaourt but I keep getting this output
==> Making package: package-query 1.2-2 (Tue May 28 05:08:29 MDT 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading package-query-1.2.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 367k 100 367k 0 0 201k 0 0:00:01 0:00:01 --:--:-- 201k
==> Validating source files with md5sums...
package-query-1.2.tar.gz ... Passed
==> Extracting sources...
-> Extracting package-query-1.2.tar.gz with bsdtar
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/home/christian/package-query/src/package-query-1.2/missing: Unknown `--is-lightweight' option
Try `/home/christian/package-query/src/package-query-1.2/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
checking whether make supports nested variables... no
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/christian/package-query/src/package-query-1.2':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
Last edited by murray825 (2013-05-28 11:27:01)You should learn to use makepkg before you start using a wrapper.
http://jasonwryan.com/blog/2013/04/09/helpers/
Maybe you are looking for
-
The audio in the timeline is uneven. If I isolate the channel are there any adjustments I can make to improve the sound? I know sound is the worst thing to be trying to fix. But any advice would be great. Thanks.
-
Hi, When I build my DC I get the following warning [Ant] java.lang.reflect.InvocationTargetException [Ant] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [Ant] at sun.reflect.NativeMethodAccessorImpl.invok
-
Update Serial Numbers and Qty with bapi_outb_delivery_change
HI All I want to update serial numbers and quantity(delivery qty) for a delivery, this is mostly in case of short ship and over ship, I am using the BAPI for this updation, but I am getting errors to it. I am passing the following data in the BAPI: H
-
How to set white point in "Levels" - using a different photo
Hello all, I'm taking shots of some furniture I made. I get the shot all set up and the exposure correct for what I want, then I take an 'extra' shot with a gray and a white calibration card in the scene. Now I have two identical shots except that
-
ECC user licenses issue for using Webdynpro ABAP in portal
Hi all, If we want to use Webydnpro ABAP in our external facing portal which is being used by more than 20000 users, how do we manage the ECC licenses for all these users? It will be really expensive to have that many number of licenses in ECC (one f