Urgent: Slip output not trigger out
Hi experts
HOpe to get your help
We have two output type zwa1/zwa2. Now we found zwa1 could be triggered out by mb1b but zwa2 can't.
we have set NDR as big X and ND9 as the user group. in omj4 ,we setup plant locaiton and user gorup with printer.
Now If I set locaiton with output type with zwa1, when I do mb1b ,zwa1 could come up in message
but if I set locaiton with output type zwa2 , there is no message output trigger out.
I check the output type, it seems they both use plant/location/user group combination.
ANy adivce why zwa2 can't come up ?
Thanks
Alice
HI,
Check if both the message types are define in the access sequence procedure in inventory management,
Check the automatic message determination properly in MN21, MN22 and MN23 and see to that the all the information is provided correctly
Thanks & Regards
Kiran
Similar Messages
-
How mb1b output type trigger out
Hi experts
How mb1b output type trigger out? we found when we do mb1b , it also will trigger out one output type by default printer in user profile ? How this work? We only hope it trigger out output type BY OMJ4 setup.
THanks
ALiceHi experts
I check OMJR/OMJ3, but zwa1 or wa01 output type doesn'et setup in it. OMJR setup the printer item as 6 for movement type . only OMJ4 setup wa01 and zwa1 output type . NACE could see the output type configure, but I don't know if user A set user group in profile for ND9. it should trigger out zwa1 output , why wa01 output will also trigger out ,
How IM trigger the output type ? In mn23, the two output type both setup for printer item 6.
THanks
alice -
When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only
If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao. -
How to Mb1b 322 or 344 movmenet type trigger out ?
Hi
Does anyone know if I use mb1b to do 322 or 344 movement, which output type should be trigger out ? wexx or waxx? does it need setup conditon in mn21 then it could trigger out type?
Does it need maintian in omb4? eg: 322 , choose print item for movment 322 / 344 ?
In ombr, we have setup mb1b as print version as 1.
Sometimes, it will maybe will trigger out wa01 , or wa02 ...don't know how it tirgger out ?
Thanks
Alice
Edited by: alice zhang on Feb 2, 2008 7:27 AMHi expert
In OMB4 , I found movement 322/344 doesn't set the Printing of document item. for other 311 movement, it set 6 as material doc printout for GI/GR.
To printout the slip when we do mb1b for 322/344 movement, SHould I set this printing of document item , and in mn21, I need create the condition for it ?
For printing of document item, even it's different , like 1,2,3,..... But it will use same form according to the output type ,right? Or In general , for 322/344, which print of document item I should setup? where I could see the difference if I set different number of print of document item? like 1 or 6
Thanks
ALice -
SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification
I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.
Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered -
PAI is NOT trigger for ALV in subscreen
Hi, All
Currently, I am using ALV object to output ALV report in one SUBSCREEN.
When I double-click, the PAI is not trigger. But just go into double-click event directly.
However, If I use AVL function or object to output in NORMAL screen, PAI is trigger after double click.
SY-UCOMM is like %_GC 920 3Hello Ocean
The ALV grid is a special control in terms that all the events are already pre-registered at the control (method SET_REGISTERED_EVENTS). This means that as soon as you define an event handler method and SET HANDLER for the corresponding event your application can deal with this event.
You can register all events of the ALV grid as application events (i.e. after any event handling PAI of the screen is triggered) at the CONSTRUCTOR method:
I_APPL_EVENTS = 'X'
However, I prefer to use method CL_GUI_CFW=>SET_NEW_OK_CODE because it offers more flexibility to me:
Only those event where I need to trigger PAI after event handling are affected
By setting a new ok-code I can trigger a specific logic at PAI
Regards
Uwe -
BPM Collect pattern is not coming out and it is in loop.
Hi Experts,
We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state. We have set it for 5 min and block is not coming out from loop. We exported the code to QA and it is working in QA. We tried SWU3 transaction as given in the below forum and it didn't help us.
bpm collect time infinite loop error
Some one please help us.
Thanks
Venkat
Edited by: Venkata Gupta on Nov 27, 2008 12:54 AMHi
Is Your BPM having deadline branch ?
If there is any system Exception then catch it.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
According to thread mentioned by you ,Schedule your Missed Deadline Branch.
Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error. -
CALL DOES NOT ROUTE OUT THE LOCAL GATEWAY
Local calls will not route out the local Gateway of branch1 to the PSTN or from the PSTN back to branch1, however they will route out either CorpHQ or branch2 backup gateways. When I go into the route group configuration for branch1, and remove the backup gateways, I get a fast busy tone when I dial the local number. I know the MGCP Gateway at branch1 is functioning because when I dial 911 and run debug ISDN Q931, the call routes properly through branch1, so I have a call routing problem. I ran DNA and it came back as ROUTE THIS PATTERN and all of the number translations looked accurate, so I didn't have to check for any block patterns. I'm not getting any errors on the calling party phone display. When I deleted the route pattern for the branch1 site and forced it to use the global route pattern, I received a debug output on branch1. I do not know a debug command (such as debug voip dial-peer or debug ccsip messages) to use for an MGCP Gateway to see if the call is actually reaching the Gateway.
I have checked the following:
the route pattern configuration
the translation pattern configuration
the called party transformation pattern configuration
the route list configuration to make sure the correct route group for branch1 was selected
the route group configuration to make sure that the branch1 Gateway was first in the order of selected devices
the route pattern configuration to make sure the correct route list for branch1 ist selected
the Gateway configuration to make sure it's using the device pool for branch1 and to make sure the called party transformation CSS for the branch1 Gateway is applied
the device pool configuration to make sure it's using the route group branch1
Any assistance would be greatly appreciated
Regards,
RonHi Nishant:
Please see the attachments for the Gateway pages
The significant digits for inbound calls for all 3 gateways is '4'
Please see the running-configs of the 3 gateways and the PSTN
Please see the debugs for the INBOUND calls
Many Thanks,
Ron
The following INBOUND call from the PSTN to 2065011001 is now working, however it is supposed to be routing through CorpHQ and is instead routing through Branch1. Please see 'DEBUG VOIP CCAPI INOUT' & 'DEBUG ISDN Q931'
Branch1#
ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x0096
Cause i = 0x8290 - Normal call clearing
//22/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x16, digit_event=0x0, enable=FALSE, consume=FALSE)
//22/5A001212800B/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=22
//22/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x49E07FD4, callID=0x16, disp=0, digit_event=0x0, enable=FALSE, consume=FALSE)
//22/5A001212800B/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x49E07FD4, Call Id=22
//22/5A001212800B/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
//22/5A001212800B/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Null,
Tone Direction=Network, Params=0x0, Call Id=22
//23/5A001212800B/CCAPI/ccGetCallStatistics:
Call Stats=0x4A5346FC, Call Id=23
//22/5A001212800B/CCAPI/ccConferenceDestroy:
Conference Id=0xC, Tag=0x0
//22/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0xC, Source Interface=0x49E07FD4, Source Call Id=22,
Destination Call Id=23, Disposition=0x0, Tag=0x0
//23/xxxxxxxxxxxx/CCAPI/cc_api_bridge_drop_done:
Conference Id=0xC, Source Interface=0x495BABA4, Source Call Id=23,
Destination Call Id=22, Disposition=0x0, Tag=0x0
//22/5A001212800B/CCAPI/cc_generic_bridge_done:
Conference Id=0xC, Source Interface=0x495BABA4, Source Call Id=23,
Destination Call Id=22, Disposition=0x0, Tag=0x0
//22/5A001212800B/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
//22/5A001212800B/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
//22/5A001212800B/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
//23/5A001212800B/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
//23/5A001212800B/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
//23/5A001212800B/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x495BABA4, Tag=0x0, Call Id=23,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
//23/5A001212800B/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
:cc_free_feature_vsa freeing 4821DDE8
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
vsacount in free is 1
//22/5A001212800B/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x49E07FD4, Tag=0x0, Call Id=22,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
//22/5A001212800B/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
:cc_free_feature_vsa freeing 4821DEC8
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
vsacount in free is 0
ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref = 0x8096
ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x0096
ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0097
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18381
Preferred, Channel 1
Progress Ind i = 0x8183 - Origination address is non-ISDN
Display i = 'Seattle US Phone'
Calling Party Number i = 0x4180, '2065015111'
Plan:ISDN, Type:Subscriber(local)
Called Party Number i = 0xC1, '2065011001'
Plan:ISDN, Type:Subscriber(local)
//-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x49E07FD4, Interface Type=6, Destination=, Mode=0x9,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=D000000002f5368f000000F580000097)
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:cc_get_feature_vsa malloc success
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
cc_get_feature_vsa count is 1
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:FEATURE_VSA attributes are: feature_name:0,feature_time:1210179280,feature_id:24
//24/74820328800C/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=6, FlowMode=1
//24/74820328800C/CCAPI/ccCallSetContext:
Context=0x4A524790
//-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x495BABA4, Interface Type=9, Destination=0.0.0.0, Mode=0x9,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=D000000002f5368f000000F580000097)
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:cc_get_feature_vsa malloc success
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
cc_get_feature_vsa count is 2
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:FEATURE_VSA attributes are: feature_name:0,feature_time:1210179056,feature_id:25
//25/74820328800C/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
//25/74820328800C/CCAPI/ccCallSetContext:
Context=0x4A524580
//25/74820328800C/CCAPI/cc_api_call_connected:
Interface=0x495BABA4, Data Bitmask=0x0, Progress Indication=NULL(0),
Connection Handle=0
//25/74820328800C/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
//24/74820328800C/CCAPI/cc_api_call_proceeding:
Interface=0x49E07FD4, Progress Indication=NULL(0)
//24/74820328800C/CCAPI/cc_api_call_connected:
Interface=0x49E07FD4, Data Bitmask=0x1, Progress Indication=DESTINATION IS NON ISDN(2),
Connection Handle=0
//24/74820328800C/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
//24/74820328800C/CCAPI/ccCallModify:
Nominator=0x1000, Params=0x4A2E7368, Call Id=24
//24/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x18, digit_event=0x1, enable=TRUE, consume=FALSE)
//24/74820328800C/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=24
//24/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x49E07FD4, callID=0x18, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
//24/74820328800C/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x49E07FD4, Call Id=24
//24/74820328800C/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=15000(ms), Inter Digit Timeout=10000(ms))
//24/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x4A2E757C, callID1=0x18, callID2=0x19, tag=0x0)
//24/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x4A2E757C, callID1=0x18, gcid=0-0-0-0, tag=0x0)
//25/xxxxxxxxxxxx/CCAPI/ccConferenceCreate:
(confID=0x4A2E757C, callID2=0x19, gcid=0-0-0-0, tag=0x0)
//24/74820328800C/CCAPI/ccConferenceCreate:
Conference Id=0x4A2E757C, Call Id1=24, Call Id2=25, Tag=0x0
//24/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0xD, Source Interface=0x49E07FD4, Source Call Id=24,
Destination Call Id=25, Disposition=0x0, Tag=0xFFFFFFFF
//25/xxxxxxxxxxxx/CCAPI/cc_api_bridge_done:
Conference Id=0xD, Source Interface=0x495BABA4, Source Call Id=25,
Destination Call Id=24, Disposition=0x0, Tag=0x0
//24/74820328800C/CCAPI/cc_generic_bridge_done:
Conference Id=0xD, Source Interface=0x495BABA4, Source Call Id=25,
Destination Call Id=24, Disposition=0x0, Tag=0x0
//24/74820328800C/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0xD, Destination Call Id=25)
//25/74820328800C/CCAPI/ccConferenceCreate:
Call Entry(Conference Id=0xD, Destination Call Id=24)
//24/74820328800C/CCAPI/cc_api_caps_ind:
Destination Interface=0x495BABA4, Destination Call Id=25, Source Call Id=24,
Caps(Codec=0x1, Fax Rate=0x1, Vad=0x1,
Modem=0x2, Codec Bytes=20, Signal Type=3)
//24/74820328800C/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=1000(ms), Fax Nom=300(ms))
//25/74820328800C/CCAPI/cc_api_caps_ind:
Destination Interface=0x49E07FD4, Destination Call Id=24, Source Call Id=25,
Caps(Codec=0x4, Fax Rate=0x2, Vad=0x1,
Modem=0x0, Codec Bytes=20, Signal Type=2)
//25/74820328800C/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=1000(ms), Fax Nom=300(ms))
//25/74820328800C/CCAPI/cc_api_caps_ack:
Destination Interface=0x49E07FD4, Destination Call Id=24, Source Call Id=25,
Caps(Codec=g729r8(0x4), Fax Rate=FAX_RATE_VOICE(0x2), Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2, Seq Num Start=9314)
//24/74820328800C/CCAPI/cc_api_caps_ack:
Destination Interface=0x495BABA4, Destination Call Id=25, Source Call Id=24,
Caps(Codec=g729r8(0x4), Fax Rate=FAX_RATE_VOICE(0x2), Vad=OFF(0x1),
Modem=OFF(0x0), Codec Bytes=20, Signal Type=2, Seq Num Start=9314)
//24/74820328800C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x49E07FD4, Call Id=24
//24/74820328800C/CCAPI/cc_api_voice_mode_event:
Call Id=24
//24/74820328800C/CCAPI/cc_api_voice_mode_event:
Call Entry(Context=0x4A524790)
//24/74820328800C/CCAPI/cc_process_notify_bridge_done:
Conference Id=0xD, Call Id1=24, Call Id2=25
//24/74820328800C/CCAPI/ccSetDigitTimeouts:
Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms)
//24/74820328800C/CCAPI/ccSetDigitTimeouts:
Call Entry(Inter Digit Timeout=4000(ms), Initial Digit Timeout=4000(ms))
//24/74820328800C/CCAPI/ccRestartDigitTimeoutMsec:
Digit Timeout=0, Call Id=24
//24/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x18, digit_event=0x1, enable=TRUE, consume=FALSE)
//24/74820328800C/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=24
//24/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x49E07FD4, callID=0x18, disp=0, digit_event=0x1, enable=TRUE, consume=FALSE)
//24/74820328800C/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0x0, Interface=0x49E07FD4, Call Id=24
//24/74820328800C/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=4000(ms), Inter Digit Timeout=4000(ms))
ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8097
Channel ID i = 0xA98381
Exclusive, Channel 1
//24/74820328800C/CCAPI/ccCallModify:
Nominator=0x1000, Params=0x4A2E6E68, Call Id=24
//24/74820328800C/CCAPI/cc_api_call_modify_done:
Result=0, Interface=0x49E07FD4, Call Id=24
ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8 callref = 0x8097
Progress Ind i = 0x8088 - In-band info or appropriate now available
//24/74820328800C/CCAPI/ccGenerateToneInfo:
Stop Tone On Digit=FALSE, Tone=Ring Back,
Tone Direction=Network, Params=0x0, Call Id=24
//24/74820328800C/CCAPI/cc_handle_inter_digit_timer:
Generate inter-digit timeout CC_EV_CALL_DIGIT_END event
The following INBOUND call from the PSTN to 5126022001 fails and is supposed to be routing through Branch1 and is instead routing through CorpHQ. Please see 'DEBUG VOIP CCAPI INOUT'
CorpHQ#
//-1/A31ADF52800B/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=5126026222
cisco-anitype=4
cisco-aniplan=1
cisco-anipi=0
cisco-anisi=0
dest=5126022001
cisco-desttype=4
cisco-destplan=1
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-lastrdn=
cisco-rdntype=-1
cisco-rdnplan=-1
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
//-1/A31ADF52800B/CCAPI/cc_api_call_setup_ind_common:
Interface=0x49F42894, Call Info(
Calling Number=5126026222,(Calling Name=)(TON=Subscriber, NPI=ISDN, Screening=Not Screened, Presentation=Allowed),
Called Number=5126022001(TON=Subscriber, NPI=ISDN),
Calling Translated=FALSE, Subscriber Type Str=RegularLine, FinalDestinationFlag=TRUE,
Incoming Dial-peer=1, Progress Indication=ORIGINATING SIDE IS NON ISDN(3), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=-1
//-1/A31ADF52800B/CCAPI/ccCheckClipClir:
In: Calling Number=5126026222(TON=Subscriber, NPI=ISDN, Screening=Not Screened, Presentation=Allowed)
//-1/A31ADF52800B/CCAPI/ccCheckClipClir:
Out: Calling Number=5126026222(TON=Subscriber, NPI=ISDN, Screening=Not Screened, Presentation=Allowed)
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:cc_get_feature_vsa malloc success
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
cc_get_feature_vsa count is 1
//-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
:FEATURE_VSA attributes are: feature_name:0,feature_time:1241383960,feature_id:13
//13/A31ADF52800B/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=5126026222(TON=Subscriber, NPI=ISDN, Screening=Not Screened, Presentation=Allowed),
Called Number=5126022001(TON=Subscriber, NPI=ISDN))
//13/A31ADF52800B/CCAPI/cc_process_call_setup_ind:
Event=0x497D0010
//-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 5126022001
//13/A31ADF52800B/CCAPI/ccCallSetContext:
Context=0x4A131A54
//13/A31ADF52800B/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 13 with tag 1 to app "_ManagedAppProcess_Default"
//13/A31ADF52800B/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
//13/A31ADF52800B/CCAPI/ccCallDisconnect:
Cause Value=1, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
//13/A31ADF52800B/CCAPI/ccCallDisconnect:
Cause Value=1, Call Entry(Responsed=TRUE, Cause Value=1)
//13/A31ADF52800B/CCAPI/cc_api_get_transfer_info:
Transfer Number Is Null
//13/A31ADF52800B/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x49F42894, Tag=0x0, Call Id=13,
Call Entry(Disconnect Cause=1, Voice Class Cause Code=0, Retry Count=0)
//13/A31ADF52800B/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
:cc_free_feature_vsa freeing 49FE0410
//-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
vsacount in free is 0
PSTN#sh run
Building configuration...
Current configuration : 13975 bytes
! No configuration change since last restart
version 12.4
no service pad
no service timestamps debug uptime
no service timestamps log uptime
no service password-encryption
hostname PSTN
boot-start-marker
boot-end-marker
card type e1 0 0
card type t1 0 1
logging message-counter syslog
no aaa new-model
clock timezone EST -5
clock summer-time EST recurring
network-clock-participate wic 0
network-clock-participate wic 1
no network-clock-participate aim 0
dot11 syslog
ip source-route
ip cef
no ip domain lookup
ip domain name att.com
ip name-server 177.1.100.110
ip multicast-routing
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-ni
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
redirect ip2ip
fax protocol cisco
sip
bind control source-interface Loopback10
bind media source-interface Loopback10
header-passing
voice translation-rule 101
rule 1 /^\+.*/ //
rule 2 /^501.*/ //
rule 3 /^1206.*/ //
rule 4 /^00.*/ //
rule 5 /^0011.*/ //
rule 6 /^206/ /1206/
rule 7 /^1512.*/ /\0/
rule 8 /^011\(.*\)/ /\1/
voice translation-rule 102
rule 1 /^1\(2065015111\)$/ /\1/ type any subscriber plan any isdn
rule 2 /^1\(2065015555\)$/ /\1/ type any subscriber plan any isdn
rule 3 /^1\(2065015151\)$/ /\1/ type any subscriber plan any isdn
rule 4 /^1\(5126026222\)$/ /\1/ type any national plan any isdn
rule 5 /^31670357575$/ /&/ type any international plan any isdn
rule 6 /^31207037333$/ /&/ type any international plan any isdn
rule 7 /^31107047444$/ /&/ type any international plan any isdn
rule 8 /^911$/ /&/ type any unknown plan any unknown
rule 9 /^15126022.../ /&/ type any unknown plan any unknown
rule 10 /^31207033.../ /&/ type any unknown plan any unknown
rule 11 /^....$/ /&/ type any unknown plan any unknown
voice translation-rule 103
rule 1 /^206.*/ /&/ type any subscriber plan any isdn
rule 2 /^1/ // type any national plan any isdn
rule 3 /^00/ // type any international plan any isdn
voice translation-rule 201
rule 1 /^\+.*/ //
rule 2 /^602.*/ //
rule 3 /^1512.*/ //
rule 4 /^00.*/ //
rule 5 /^0011.*/ //
rule 6 /^512/ /1&/
rule 7 /^1206.*/ /&/
rule 8 /^011\(31.*\)/ /\1/
voice translation-rule 202
rule 1 /^1\(5126026222\)$/ /\1/ type any subscriber plan any isdn
rule 2 /^1\(2065015555\)$/ /\1/ type any national plan any isdn
rule 3 /^1\(2065015151\)$/ /\1/ type any national plan any isdn
rule 4 /^1\(2065015111\)$/ /\1/ type any national plan any isdn
rule 5 /^31670357575$/ /&/ type any international plan any isdn
rule 6 /^31207037333$/ /&/ type any international plan any isdn
rule 7 /^31107047444$/ /&/ type any international plan any isdn
rule 8 /^911$/ /&/ type any unknown plan any unknown
rule 9 /^12065011.../ /&/ type any unknown plan any unknown
rule 10 /^31207033.../ /&/ type any unknown plan any unknown
rule 11 /^....$/ /&/ type any unknown plan any unknown
voice translation-rule 203
rule 1 /^512.*/ /&/ type any subscriber plan any isdn
rule 2 /^1/ // type any national plan any isdn
rule 3 /^00/ // type any international plan any isdn
voice translation-rule 301
rule 1 /^\+.*/ //
rule 2 /^20.*/ //
rule 3 /^0\([1-8].*\)/ /31\1/
rule 4 /^011/ //
rule 5 /^0031/ //
rule 6 /^703..../ /3120&/
rule 7 /^00\(1.*\)/ /\1/
voice translation-rule 302
rule 1 /^31207037333$/ /7037333/ type any subscriber plan any isdn
rule 2 /^7033\(...\)$/ /0207033\1/
rule 3 /^911$/ /112/ type any unknown plan any unknown
rule 4 /^31\(670357575\)$/ /0\1/ type any national plan any isdn
rule 5 /^31\(107047444\)$/ /0\1/ type any national plan any isdn
rule 6 /^12065015555$/ /&/ type any international plan any isdn
rule 7 /^12065015151$/ /&/ type any international plan any isdn
rule 8 /^12065015111$/ /&/ type any international plan any isdn
rule 9 /^15126026222$/ /&/ type any international plan any isdn
rule 10 /^12065011...$/ /&/ type any unknown plan any unknown
rule 11 /^15126022...$/ /&/ type any unknown plan any unknown
rule 12 /^....$/ /&/ type any unknown plan any unknown
voice translation-rule 303
rule 1 /^703.*/ /&/ type any subscriber plan any isdn
rule 2 /^010/ // type any national plan any isdn
rule 3 /^1/ // type any international plan any isdn
voice translation-rule 1000
rule 1 /.*\(1...$\)/ /206501\1/
rule 2 /.*\(2...$\)/ /512602\1/
rule 3 /.*\(45..$\)/ /020757\1/
voice translation-rule 1001
rule 1 /^1206...5...$/ /+&/
rule 2 /^1512...6...$/ /+&/
rule 3 /^31.0...7...$/ /+&/
voice translation-profile 1-HQ-Change_DNIS-Check_ANI
translate called 101
voice translation-profile 1-HQ-Proper_Types
translate calling 102
translate called 103
voice translation-profile 2-BR1-Change_DNIS-Check_ANI
translate called 201
voice translation-profile 2-BR1-Proper_Types
translate calling 202
translate called 203
voice translation-profile 3-BR2-Change_DNIS-Check_ANI
translate called 301
voice translation-profile 3-BR2-Proper_Types
translate calling 302
translate called 303
voice translation-profile SIP-NORMALIZE-DNIS-ANI
translate calling 1001
translate called 1000
voice-card 0
dspfarm
archive
log config
hidekeys
controller E1 0/0/0
clock source internal
pri-group timeslots 1-3,16
description == Voice Circuit to Branch2
controller T1 0/1/0
clock source internal
cablelength long 0db
pri-group timeslots 1-3,24
description == Voice Circuit to CorpHQ
controller T1 0/1/1
clock source internal
cablelength long 0db
pri-group timeslots 1-3,24
description == Voice Circuit to Branch1
interface Loopback0
ip address 177.1.254.254 255.255.255.255
interface Loopback10
ip address 177.1.254.250 255.255.255.255
interface Loopback11
ip address 177.1.254.251 255.255.255.255
interface FastEthernet0/0
description ==TO INTERNET==
ip address 192.168.1.150 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
description === To HQ
ip address 177.1.19.1 255.255.255.0
duplex auto
speed auto
interface Serial0/0/0:15
description == PRI Circuit to R3-BR2
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn protocol-emulate network
isdn incoming-voice voice
isdn negotiate-bchan resend-setup
no isdn outgoing ie network-facility
isdn outgoing display-ie
no cdp enable
interface Serial0/1/0:23
description == PRI Circuit to R1-HQ
no ip address
encapsulation hdlc
isdn switch-type primary-5ess
isdn protocol-emulate network
isdn incoming-voice voice
isdn negotiate-bchan
isdn outgoing display-ie
no cdp enable
interface Serial0/1/1:23
description == PRI Circuit to R2-BR1
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn protocol-emulate network
isdn incoming-voice voice
isdn supp-service name calling
isdn negotiate-bchan resend-setup
isdn outgoing ie network-facility
no cdp enable
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
control-plane
voice-port 0/0/0:15
translation-profile incoming 3-BR2-Change_DNIS-Check_ANI
description == Voice PRI to Branch2
voice-port 0/1/0:23
translation-profile incoming 1-HQ-Change_DNIS-Check_ANI
description == Voice PRI to CorpHQ
voice-port 0/1/1:23
translation-profile incoming 2-BR1-Change_DNIS-Check_ANI
description == Voice PRI to Branch1
dial-peer voice 1 pots
description == All inbound calls from HQ BR1 BR2 into PSTN
incoming called-number .
direct-inward-dial
dial-peer voice 101 pots
description == Subscriber Calls from PSTN into CorpHQ
translation-profile outgoing 1-HQ-Proper_Types
preference 1
destination-pattern ^2065011...$
direct-inward-dial
port 0/1/0:23
forward-digits 10
dial-peer voice 102 pots
description == National Calls from PSTN into CorpHQ
translation-profile outgoing 1-HQ-Proper_Types
preference 1
destination-pattern ^12065011...$
direct-inward-dial
port 0/1/0:23
forward-digits 10
dial-peer voice 103 pots
description == International Calls into CorpHQ from PSTN Coming from NL Ph
translation-profile outgoing 1-HQ-Proper_Types
preference 1
destination-pattern ^0012065011...$
direct-inward-dial
port 0/1/0:23
forward-digits 10
dial-peer voice 104 pots
description == + Calls into CorpHQ from PSTN Coming from Mobiles
translation-profile outgoing 1-HQ-Proper_Types
preference 1
destination-pattern +12065011...$
direct-inward-dial
port 0/1/0:23
forward-digits 10
dial-peer voice 201 pots
description == Subscriber Calls from PSTN into Branch1
translation-profile outgoing 2-BR1-Proper_Types
preference 1
destination-pattern ^5126022...$
direct-inward-dial
port 0/1/1:23
forward-digits 10
dial-peer voice 202 pots
description == National Calls from PSTN into Branch1
translation-profile outgoing 2-BR1-Proper_Types
preference 1
destination-pattern ^15126022...$
direct-inward-dial
port 0/1/1:23
forward-digits 10
dial-peer voice 203 pots
description == International Calls into Branch1 from PSTN Coming from NL Ph
translation-profile outgoing 2-BR1-Proper_Types
preference 1
destination-pattern ^0015126022...$
direct-inward-dial
port 0/1/1:23
forward-digits 10
dial-peer voice 204 pots
description == + Calls into Branch1 from PSTN Coming from Mobiles
translation-profile outgoing 2-BR1-Proper_Types
preference 1
destination-pattern +15126022...$
direct-inward-dial
port 0/1/1:23
forward-digits 10
dial-peer voice 301 pots
description == Subscriber Calls from PSTN into Branch2
translation-profile outgoing 3-BR2-Proper_Types
destination-pattern ^7033...$
direct-inward-dial
port 0/0/0:15
forward-digits 7
dial-peer voice 302 pots
description == National Calls from PSTN into Branch2
translation-profile outgoing 3-BR2-Proper_Types
destination-pattern ^0207033...$
direct-inward-dial
port 0/0/0:15
forward-digits 10
dial-peer voice 303 pots
description == International Calls into Branch2 from PSTN Coming from US Ph
translation-profile outgoing 3-BR2-Proper_Types
destination-pattern ^01131207033...$
direct-inward-dial
port 0/0/0:15
forward-digits 9
prefix 0
dial-peer voice 304 pots
description == International Calls into Branch2 from PSTN Coming from US Ph
translation-profile outgoing 3-BR2-Proper_Types
destination-pattern ^31207033...$
direct-inward-dial
port 0/0/0:15
forward-digits 9
prefix 0
dial-peer voice 305 pots
description == + Calls into Branch2 from PSTN Coming from Mobiles
translation-profile outgoing 3-BR2-Proper_Types
destination-pattern +31207033...$
direct-inward-dial
port 0/0/0:15
forward-digits 9
prefix 0
dial-peer voice 1000 voip
description == Calls into AT&T SIP ITSP for VC Week1 Lab1
rtp payload-type nse 99
rtp payload-type nte 100
voice-class sip localhost dns:sip1.att.com
session protocol sipv2
incoming called-number .
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 5000 voip
service aa
destination-pattern A5000
session target ipv4:177.1.254.254
incoming called-number A5000
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
num-exp 1888....... 911
num-exp 1900....... 911
num-exp 1976....... 911
num-exp 1777....... 911
num-exp 1444....... 911
num-exp 0800....... 911
num-exp 0900....... 911
sip-ua
telephony-service
no auto-reg-ephone
max-ephones 1
max-dn 10
ip source-address 177.1.254.254 port 2000
caller-id block code *67
system message You WILL PASS this Exam!
voicemail A5000
max-conferences 8 gain -6
call-forward pattern .T
dn-webedit
transfer-system full-consult
transfer-pattern .T
create cnf-files version-stamp 7960 Sep 01 2012 15:29:37
ephone-dn 1 dual-line
number 12065015111 secondary +12065015111
label Seattle, US +1 206 501 5111
description INE PSTN Phone
name Seattle US Phone
ephone-dn 2 dual-line
number 15126026222 secondary +15126026222
label Austin, US +1 512 602 6222
name Austin TX Phone
ephone-dn 3 dual-line
number 31207037333 secondary +31207037333
label Amsterdam, NL +31 20 703 73 33
name Amsterdam NL Phone
ephone-dn 4 dual-line
number 12065015555 secondary +12065015555
label Hurley Mobile +1 206 501 5555
name Hurley's Mobile
call-forward busy A5000
call-forward noan A5000 timeout 16
ephone-dn 5 dual-line
number 12065015151 secondary +12065015151
label Hurley's Home +1 206 501 5151
name Hurley's Home
call-forward busy A5000
call-forward noan A5000 timeout 12
ephone-dn 6 dual-line
number 31670357575 secondary +31670357575
label Sawyer's Mobile +31 6 70357575
name Sawyer's Mobile
call-forward busy A5000
call-forward noan A5000 timeout 16
ephone-dn 7 dual-line
number 911 secondary 112
label US/EU Emer/FreePhone/Prem
name Emergency Services
ephone-dn 8 dual-line
number 15126026262 secondary +15126026262
label BLinus Mobile +1 512 602 6262
name Benjamin Linus Mobile
call-forward busy A5000
call-forward noan A5000 timeout 16
ephone-dn 9 dual-line
number 31207037373 secondary +31207037373
label DHume Home +31 20 703 73 73
name Desmond Hume Home
call-forward busy A5000
call-forward noan A5000 timeout 16
ephone-dn 10 dual-line
number 31107047444 secondary +31107047444
label Rotterdam, NL +31 10 704 74 44
name Rotterdam NL Phone
ephone 1
device-security-mode none
mac-address A456.3040.0DAA
type 7975
button 1:1 2:2 3:3 4:10
button 5:6 6o7,8,5,4
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous level 0 limit 20
line aux 0
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
scheduler allocate 20000 1000
ntp source Loopback0
ntp master 10
ntp server 64.90.182.55
end
CorpHQ#sh run
Building configuration...
Current configuration : 6353 bytes
! No configuration change since last restart
version 12.4
no service pad
no service timestamps debug uptime
no service timestamps log uptime
no service password-encryption
hostname CorpHQ
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
clock timezone PST -8
clock summer-time PDT recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 177.1.11.1 177.1.11.14
ip dhcp excluded-address 177.1.11.21 177.1.11.254
ip dhcp excluded-address 177.2.11.1 177.2.11.14
ip dhcp excluded-address 177.2.11.21 177.2.11.254
ip dhcp pool CorpHQ-Phones
network 177.1.11.0 255.255.255.0
option 150 ip 177.1.10.10 177.1.10.20
default-router 177.1.11.1
dns-server 177.1.100.110
ip dhcp pool Branch1-Phones
network 177.2.11.0 255.255.255.0
option 150 ip 177.1.10.10 177.1.10.20
default-router 177.2.11.1
dns-server 177.1.100.110
no ip domain lookup
ip multicast-routing
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-ni
voice service voip
allow-connections h323 to h323
fax protocol cisco
sip
bind control source-interface Loopback0
bind media source-interface Loopback0
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice translation-rule 1
rule 1 // // type any subscriber plan any isdn
voice translation-rule 2
rule 1 // // type any national plan any isdn
voice translation-rule 3
rule 1 // // type any international plan any isdn
voice translation-rule 10
rule 1 /^[2-9].........$/ /9&/
rule 2 /^1[2-9].........$/ /9&/
rule 3 /^011/ /9&/
voice translation-profile MakeInternational
translate called 3
voice translation-profile MakeNational
translate called 2
voice translation-profile MakeSubscriber
translate called 1
voice translation-profile Prefix9_InFrom_CUCM
translate called 10
voice-card 0
dsp services dspfarm
archive
log config
hidekeys
controller T1 0/0/0
pri-group timeslots 1-3,24
description == Voice Circuit to PSTN
interface Loopback0
ip address 177.1.254.1 255.255.255.255
ip pim dense-mode
interface FastEthernet0/0
description == To CorpHQ-Switch
no ip address
duplex auto
speed auto
interface FastEthernet0/0.10
description == Server VLAN
encapsulation dot1Q 10
ip address 177.1.10.1 255.255.255.0
ip pim dense-mode
interface FastEthernet0/0.11
description == Voice VLAN
encapsulation dot1Q 11
ip address 177.1.11.1 255.255.255.0
ip helper-address 177.1.10.10
ip nbar protocol-discovery
ip pim dense-mode
interface FastEthernet0/0.12
description == Data VLAN
encapsulation dot1Q 12
ip address 177.1.12.1 255.255.255.0
interface FastEthernet0/0.13
description == PSTN PHONE VLAN
encapsulation dot1Q 13
ip address 177.1.13.1 255.255.255.0
interface FastEthernet0/1
description === To PSTN
ip address 177.1.19.254 255.255.255.0
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
interface Serial0/1/0
description == Frame-Relay Circuit to WAN
no ip address
encapsulation frame-relay
fair-queue 64 256 36
cdp enable
frame-relay lmi-type ansi
ip rsvp bandwidth
interface Serial0/1/0.1 point-to-point
description == FR To BR1
bandwidth 384
ip address 177.0.101.1 255.255.255.0
ip pim dense-mode
snmp trap link-status
frame-relay interface-dlci 101
ip rsvp bandwidth 136
interface Serial0/1/0.2 point-to-point
description == FR To BR2
ip address 177.0.201.1 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 102
ip rsvp bandwidth 136
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 177.1.19.1
ip route 0.0.0.0 0.0.0.0 FastEthernet0/0.10
no ip http server
no ip http secure-server
control-plane
voice-port 0/0/0:23
voice-port 0/3/0
voice-port 0/3/1
ccm-manager music-on-hold
sccp local Loopback0
sccp ccm 177.1.10.10 identifier 1 priority 1 version 5.0.1
sccp ccm 177.1.10.20 identifier 2 priority 2 version 5.0.1
sccp ccm 177.1.254.3 identifier 3 priority 3 version 5.0.1
sccp
sccp ccm group 1
bind interface Loopback0
associate ccm 2 priority 1
associate ccm 1 priority 2
associate ccm 3 priority 3
associate profile 1 register CorpHQ-729-MTP
associate profile 2 register CorpHQ-711-MTP
associate profile 3 register CorpHQ-HW-Xcode
dspfarm profile 3 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
codec ilbc
maximum sessions 2
associate application SCCP
dspfarm profile 1 mtp
codec g729ar8
codec g729r8
rsvp
maximum sessions software 10
associate application SCCP
dspfarm profile 2 mtp
codec g711ulaw
rsvp
maximum sessions software 10
associate application SCCP
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
dial-peer voice 10 pots
translation-profile outgoing MakeSubscriber
destination-pattern 911
no digit-strip
port 0/0/0:23
dial-peer voice 11 pots
translation-profile outgoing MakeSubscriber
destination-pattern 9[2-9]..[2-9]......$
port 0/0/0:23
dial-peer voice 12 pots
translation-profile outgoing MakeNational
destination-pattern 91[2-9]..[2-9]......$
port 0/0/0:23
forward-digits 11
dial-peer voice 13 pots
translation-profile outgoing MakeInternational
destination-pattern 9011T
port 0/0/0:23
prefix 011
dial-peer voice 100 voip
description == Inbound/Outbound SIP PSTN GW From/To CUCM Pub
translation-profile incoming Prefix9_InFrom_CUCM
destination-pattern ^2065011...$
voice-class codec 1
session protocol sipv2
session target ipv4:177.1.10.10
incoming called-number .
ip qos dscp cs3 signaling
dial-peer hunt 1
sip-ua
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous level 0 limit 20
line aux 0
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
scheduler allocate 20000 1000
ntp source Loopback0
ntp master 2
ntp server 177.1.254.254
end
Branch1#sh run
Building configuration...
Current configuration : 3838 bytes
! Last configuration change at 01:19:02 CDT Thu Oct 10 2013
version 12.4
no service pad
no service timestamps debug uptime
no service timestamps log uptime
no service password-encryption
hostname Branch1
boot-start-marker
boot-end-marker
logging message-counter syslog
no aaa new-model
clock timezone CST -6
clock summer-time CDT recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
dot11 syslog
ip source-route
ip cef
ip multicast-routing
no ipv6 cef
ntp update-calendar
ntp server 177.1.254.1
multilink bundle-name authenticated
isdn switch-type primary-ni
voice-card 0
dsp services dspfarm
archive
log config
hidekeys
controller T1 0/0/0
pri-group timeslots 1-3,24 service mgcp
interface Loopback0
ip address 177.1.254.2 255.255.255.255
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.11
description == Voice VLAN
encapsulation dot1Q 11
ip address 177.2.11.1 255.255.255.0
ip helper-address 177.1.254.1
ip pim dense-mode
interface FastEthernet0/0.12
description == Data VLAN
encapsulation dot1Q 12
ip address 177.2.12.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn supp-service name calling
isdn bind-l3 ccm-manager
isdn outgoing ie facility
isdn outgoing display-ie
isdn outgoing ie redirecting-number
no cdp enable
interface Serial0/1/0
description == Frame-Relay Circuit to WAN
no ip address
encapsulation frame-relay
fair-queue 64 256 37
cdp enable
no frame-relay inverse-arp
frame-relay lmi-type ansi
ip rsvp bandwidth
interface Serial0/1/0.1 point-to-point
description == FR To HQ
ip address 177.0.101.2 255.255.255.0
ip pim dense-mode
snmp trap link-status
frame-relay interface-dlci 101
ip rsvp bandwidth 136
interface Serial0/1/1
no ip address
shutdown
clock rate 2000000
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
voice-port 0/0/0:23
ccm-manager fallback-mgcp
ccm-manager redundant-host 177.1.10.10
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
mgcp
mgcp call-agent 177.1.10.20 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp fax t38 ecm
mgcp bind control source-interface Loopback0
mgcp bind media source-interface Loopback0
mgcp profile default
sccp local Loopback0
sccp ccm 177.1.254.3 identifier 3 priority 3 version 5.0.1
sccp ccm 177.1.10.10 identifier 1 priority 1 version 5.0.1
sccp ccm 177.1.10.20 identifier 2 priority 2 version 5.0.1
sccp
sccp ccm group 1
bind interface Loopback0
associate ccm 2 priority 1
associate ccm 1 priority 2
associate ccm 3 priority 3
associate profile 3 register Br1-HW-Xcode
associate profile 1 register Br1-729-MTP
associate profile 2 register Br1-711-MTP
dspfarm profile 3 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
dspfarm profile 1 mtp
codec g729ar8
codec g729r8
rsvp
maximum sessions software 10
associate application SCCP
dspfarm profile 2 mtp
codec g711ulaw
rsvp
maximum sessions software 10
associate application SCCP
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous level 0 limit 20
line aux 0
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
no login
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
no login
scheduler allocate 20000 1000
end
Branch2#sh run
Building configuration...
Current configuration : 5789 bytes
! No configuration change since last restart
version 12.4
no service pad
no service timestamps debug uptime
no service timestamps log uptime
no service password-encryption
hostname Branch2
boot-start-marker
boot system flash:c2800nm-advipservicesk9-mz.124-24.T7.bin
boot system flash:
boot-end-marker
card type e1 0 0
logging message-counter syslog
no aaa new-model
clock timezone CEST 1
clock summer-time CEDT recurring
network-clock-participate wic 0
no network-clock-participate aim 0
dot11 syslog
ip source-route
ip cef
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
no supplementary-service h225-notify cid-update
fax protocol cisco
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class custom-cptone JOIN-TONE
dualtone conference
frequency 300 3600
cadence 150 100 500
voice class custom-cptone LEAVE-TONE
dualtone conference
frequency 300 3600
cadence 500 100 150
voice translation-rule 1
rule 1 /^7033...$/ /020&/
voice translation-rule 10
rule 1 /^0/ /0&/
voice translation-rule 200
rule 1 /^206501...$/ /1&/
voice translation-profile 7DigitDNIS-to-10Digit
translate called 1
voice translation-profile Prefix0_InFrom_CUCM
translate called 10
voice translation-profile Prefix1-toCorpHQ-ANI
translate calling 200
voice-card 0
dsp services dspfarm
archive
log config
hidekeys
controller E1 0/0/0
pri-group timeslots 1-3,16
description == Voice Circuit to PSTN
controller E1 0/0/1
interface Loopback0
ip address 177.1.254.3 255.255.255.255
h323-gateway voip bind srcaddr 177.1.254.3
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.11
encapsulation dot1Q 11
ip address 177.3.11.1 255.255.255.0
ip helper-address 177.1.10.10
interface FastEthernet0/0.12
encapsulation dot1Q 12
ip address 177.3.12.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bchan-number-order ascending
no cdp enable
interface Serial0/1/0
description == Frame-Relay Circuit to WAN
no ip address
encapsulation frame-relay
fair-queue 64 256 37
cdp enable
no frame-relay inverse-arp
frame-relay lmi-type ansi
ip rsvp bandwidth
interface Serial0/1/0.1 point-to-point
description == FR To HQ
ip address 177.0.201.2 255.255.255.0
snmp trap link-status
frame-relay interface-dlci 102
ip rsvp bandwidth 136
interface Serial0/1/1
no ip address
shutdown
clock rate 2000000
interface Service-Engine1/0
no ip address
shutdown
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
control-plane
voice-port 0/0/0:15
translation-profile incoming 7DigitDNIS-to-10Digit
ccm-manager music-on-hold
sccp local Loopback0
sccp ccm 177.1.10.20 identifier 2 priority 2 version 5.0.1
sccp ccm 177.1.10.10 identifier 1 priority 1 version 5.0.1
sccp ccm 177.1.254.3 identifier 3 priority 3 version 5.0.1
sccp
sccp ccm group 1
bind interface Loopback0
associate ccm 2 priority 1
associate ccm 1 priority 2
associate ccm 3 priority 3
associate profile 4 register Br2-HW-Conf
associate profile 3 register Br2-HW-Xcode
associate profile 2 register Br2-711-MTP
associate profile 1 register Br2-729-MTP
dspfarm profile 3 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP
dspfarm profile 4 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 1
conference-join custom-cptone JOIN-TONE
conference-leave custom-cptone LEAVE-TONE
associate application SCCP
dspfarm profile 1 mtp
codec g729ar8
codec g729r8
rsvp
maximum sessions software 10
associate application SCCP
dspfarm profile 2 mtp
codec g711ulaw
rsvp
maximum sessions software 10
associate application SCCP
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
dial-peer voice 10 pots
destination-pattern 112
no digit-strip
port 0/0/0:15
dial-peer voice 11 pots
destination-pattern 00[1-9]T
port 0/0/0:15
prefix 0
dial-peer voice 12 pots
translation-profile outgoing Prefix1-toCorpHQ-ANI
destination-pattern 000T
port 0/0/0:15
prefix 00
dial-peer voice 100 voip
description == Inbound/Outbound H323 PSTN GW From/To GK and CUCM Pub
translation-profile incoming Prefix0_InFrom_CUCM
destination-pattern 0207033...$
voice-class codec 1
session target ipv4:177.1.10.10
incoming called-number .
ip qos dscp cs3 signaling
dial-peer voice 101 voip
description == Outbound H323 PSTN GW To CUCM Sub
destination-pattern 0207033...$
voice-class codec 1
session target ipv4:177.1.10.20
ip qos dscp cs3 signaling
dial-peer hunt 1
telephony-service
max-ephones 1
max-dn 1
ip source-address 177.1.254.3 port 2000
max-conferences 8 gain -6
moh test.au
multicast moh 239.2.1.1 port 16384 route 177.1.254.3 177.3.11.1
transfer-system full-consult
create cnf-files version-stamp 7960 Sep 13 2013 18:55:27
line con 0
exec-timeout 0 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
login
scheduler allocate 20000 1000
ntp source Loopback0
ntp update-calendar
ntp server 177.1.254.1
end -
PO change output not triggered after deletion of line item
Hello SAP experts,
I have one issue with PO output
I have created PO with output type & we are outputing through ME9F( 3- Send with application own transaction)
Below is the sequence,
1.PO created & outputed thru ME9F
2.Now ,i added the line item in the PO,Output triggred but not processed.
3.I deleted the line item immedietely,Output not triggered.
(My question is Why the output is not tiggered?)
4.I outputed it through ME9F,vendor will receive only 1st output & never get the 2nd o/p for the deletion of item.
I am clear that after processsing the 1st output,then only i can process the 2nd.
But in business point of view,this scene created the problem.
Please provide your valuable input.Hi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar -
Output not triggered during SAVE from Shipment
Hi,
We have a custom Idoc triggering from the Shipment. The output shows up in the output screen (as yellow) and it is set to trigger 'immediate - 4'. But when I save, it does not issue an output. No errors, nothing just does not trigger at all. If I go into the shipment again in change mode and then save it, then it triggers the output.
The output is an custom idoc, transmission medium 6, attached program RSNASTED and the form routine is EDI_PROCESSING.
I tried debugging the program (in update debug mode)...found that an internal variable XNAST-UPDAT is set to 'D' (a GERMAN comment in code says "no longer found or changed key"). The only key change I can think of is the shipment number initially with $0001 and then changes to the actual shipment #. But this should happen even for other outputs..for eg, BoL printout. It does trigger without a problem and for this this indicator is not set to 'D'.
Any thoughts ?
Regards,
AnandHi Anand,
Have u resolved this issue... bcoz i m facing the same issue..
Can u plz tell me how u resolved it..
Regards,
Siva Kumar S. -
Hello,
I am trying to trigger a scope at a certain point. I have a test signal coming after a regular sinusoid. I want to measure the output when the test signal arrives. What happens is that when my test signal comes after 1 second the trigger works perfectly fine but when my test signal comes after 3 seconds the scope does not trigger at the point I want and keeps on triggering at unwanted points. This is a conceptual question. Could anyone please help me in that.
Thanks,
KrunalHello Krunal,
I am not exactly sure what your external signal looks like, however I can suggest a couple things for you to look at. First, if the absolute value of your sine wave amplitude is less than the test point you want to measure, the scope can simply level trigger at that point. It should not matter if the signal comes in after 1 seconds or 3 seconds. The only problem you might be seeing with this is a timeout error. This is caused by the read function not being able to sample enough data within the default 5 seconds limit. Adjusting the timeout would help if you are getting this error.
If your test signal value you need to trigger off of is within the absolute value of your sine wave signal it becomes more difficult because if you specify to trigger off of a rising edge 0.5V signal this point will occur many times before the ideal trigger point. Perhaps a combination of using the trigger hold off and trigger delay might help you time the start of your acquisition a little better. If this does not help, can you please post more detail about the sine wave, your test point you want to trigger off and the behavior you are currently seeing.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D -
Why the content of the Explain Plan not show out?
Why the content of the Explain Plan not show out?
I am using Oracle 11g.
I already ran the utlxplan.sql sctipt and I also set serveroutput on.
SQL> set autotrace on
SQL> EXPLAIN PLAN FOR SELECT*FROM DEMO_TABLE WHERE OWNER='HR';
Explained.
Elapsed: 00:00:00.67When you say:
My release 10.2 database display the Explain Plan automatically.
How to make 11.1.0.6 Oracle database to display the Explain Plan automatically.What do you mean? Specifically, what commands are you executing in the 10.2 database, that displays the execution plan "automatically"?
Are you saying that if you execute the same command in 11.1.0.6, you don't get a similar result? What happens? Do you get an error?
For both the 10.2 case and the 11.1.0.6 case, post the full output of the commands you're executing, and the result you are seeing.
Then, maybe someone can help you.
When you post the output, please encapsulate it in a pair "code" tags, which is the word "code" without the quotes, surrounded by a pair of curly braces {}.
When you do this correctly, the output looks like:
This is output from my execution plan run.and is much easier to read.
Don't be afraid to use the preview tab to see if your message will be posted with the correct formatting.
-Mark -
I am trying to come up with a plan to write a LabVIEW VI to do the following test. Can you give me a few ideas how to do this in LabVIEW. I am a new to LabView. I think I how to read and write I/O ports and do comparisons. I need a little guidance on the error checking. In simple terms the test will go like this:
I have 16 digital inputs and 16 outputs.
The 16 outputs are turned on in a specific pattern (i.e. 1001000101011101) and then the 16 inputs (i.e. 1000101111111111) are read in after a time delay. The inputs are checked to see if they match the expected results. If they do it's a pass if not it's a f
ailure. This seems pretty straightforward. And I think I have an idea how to do it. Here's the problem. The inputs are changed sequentially so that all possible combinations are tried. The test needs to determine if the resulting input pattern is correct based on the outputs that were sent out. 16 outputs give 65K possible tests. For each tests there would be 1 or 2 possible results with a total of 25 results for the entire 65K possible tests. LabVIEW would have to determine the expected result or results (1 or 2 of the 25) based on the output pattern send out (1 of 65K). Then it would have to compare the actual input pattern received to see if it's a pass or fail?
Any ideas how I can approach this?The 16 outputs are simulating inputs to the device under test, (simulating remote switches and contacts). The object of the test is to test every possible combination to ensure that nothing unexpected happens at the output. The device under test is a logic motor control system and we want to make sure (among other things) that we don’t start or stop the motor when its not suppose to. How can only two tests do that?
I think you are describing how to create an array with the results. But I still don’t know how to determine what the result should be and if it is correct.
I’ve identified 25 possible valid states the motor controller can be in.
I’ve also identified the correct outputs that determine each of the 25 states.
I’ve also
identified the possible valid states you can go to from each (previous) state, You can only get to a valid new state from a previous state if the right combination of inputs is applied (we hope).
If you know what state you are in when start and you know the valid states you can go to and the inputs required to get there, you should be able test the system against that. You verify this by checking the outputs against what they should be. With 65K possible inputs combination, checking them all manually would be quite is a task. Putting this into LabView is my task. -
Where does the output of System.out.write go??
My question might be silly... but i couldn't find out the exact answer anywhere..
Where does the output of System.out.write go??!! I am not getting anything in the console.. below is the snippet!
public class TestWriteApp {
public static void main(String[] args) {
char a = 'c';
System.out.write((byte)a);
PEACE,
SandeepIs goes to the console. But a write of a byte isn't the way to see it.
Try something that will show up easier like
System.out.println("Hello World");What OS are you using? Are you using a command window? Or a GUI like Netbeans? -
Lenovo U410 Urgent Help Will Not Turn On
Hello,
Firstly i would like to thank anyone reading this post and taking the time out of their day to try and help my problem.
I have a Lenovo U410 Ultrabook i've had my Laptop for around 1-2 years now and i have kept it in a very good condition there have been no issues with it. About 1 Week ago i was using my laptop left my room for about 30 minutes to have a shower and upon returning i saw that my Laptop was not charging i unplugged the charger from the laptop and place it back in nothing happened. so i turned off my laptop and unplugged the charger from the wall socket. since then i have not been able to turn my laptop back on i have tried but the led's flash twice when i tried to turn it back on. i have changed the fuse in my charger about 3 times with new fuses all 3AMP required and there is no difference at first i thought it was a problem with the charger but now im thinking otherwise and i'm quite worried. After searching around the internet for a fix i have pressed the power button for 30 seconds and the leds blinked 3 times and after trying various methods to turn it back on it has not been succesful i have even uplugged the battery and plugged it back in after removing the back cover. i have no warranty left as it expired and i was not able to renew it. if you have had any experience with similiar problems or any suggestions i would be very interested to hear what you think the next step for me would be. i dont have much money to invest into this laptop but i am prepared to spend some money if need be.
Thank you for reading my extremely long post,
Your's faithfully
Lenovo U410 Urgent Help Will Not Turn On
Akash DesaiDear Evanacoleman
Welcome in Lenovo Community
Kindly contact the below support to check your machine at one of our service centers so that the technical team there can decide if this is a miss use case or not
Let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Maybe you are looking for
-
I had to get a new iphone and i couldn't back it up first so im trying to redownload all of the songs and ringtones i purchased i found my songs but how can i redownload all the ringtones i have already purchased.
-
Problem updating iPod 2.3 with dock connector
Please help me! I downloaded the info to update my iPod, but when I click the update button, it says "the updater does not have a firmware image." What does this mean? What can I do to fix the problem so I can update my iPod software instead of resto
-
I've noticed in an action I have, it has a step that says "Set current layer". What exactly is that and how do you use it? I want to add it to an action I'm creating.
-
Dear all, I found this forum while searching for a solution of a problem we encounter in my company. We're a production facility and I'm planning one of the production lines. In practice we struggle to properly load this production line. We're not us
-
Input Help Calendar start with Sunday
Hi. I've an InputField binded with a node atributte type Dats. The input Help Mode it's Automatically. When I show the help, the calendar start with Sunday. I want that the calendar start with Monday. Can I Do that?