URGENT: Smartform - Attaching Font to Device Type and Printing

Hello Smarform Gurus,
I have uploaded CORPOS font to SAP and using in SMARTFORMS. Whenever the PDF is called for invoice, it should print immediately.
When I open the smartform and then print, the printout is coming fine with CORPOS font.
Problem: When Invoice is created and PDF is called immediately, the prinout is not coming properly. It's because the printer device type KYOFS150 we are using does not support CORPOS. Pls let me know the options we have. We have also referred to SAP note 12462.
Thanks in advance,
Abhishek

Hi
U need to update the printer device type KYOFS150 or use another one supports that font
Max

Similar Messages

Device type and print options

Hi all,
The device type HP LJ 4350 enables print options and allow us to set which paper tray is to used in a specific form.
However, our usual supplier does not sell this device type anymore.
Does anyone know another device type that could allow tray configuration in the SPAD transaction?
Thanks for your help.

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Adobe Form Device type and Smartform Device type

Hello experts,
Please tell me It there any Body Whose Company is Using both Adobe Form and smartform too?
If YEs
Can You Please tell me how they are Printing Adobe Form and Smartform. Whenever End user take the Print out they changed the Device type Or using only one type of device type for both smartform and Adobe Form.
Thanks in Advance
Shelly Malik

Hi,
refer the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/25/6fa8fd27837846990a7a6813b06f80/frameset.htm]
Regards,
Surendar Reddy.

Urgent : How to modify the line type and table type

I am working on ALV Grid Control, i need to know how to modify the line type values to table type.
             ls_celltab-fieldname = 'ZSAVINGS '.
             ls_celltab-style = l_mode.
        INSERT ls_celltab INTO TABLE pt_celltab.
Here ls_celltab is line type and pt_celltab is table type.
Please give me the suggestion ASAP.
C.Bharath Kumar

Hi,
Here is the example
DATA: BEGIN OF LINE,
        LAND(3) TYPE C,
        NAME(10) TYPE C,
        AGE      TYPE I,
        WEIGHT   TYPE P DECIMALS 2,
      END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE
          WITH NON-UNIQUE KEY LAND NAME AGE WEIGHT.
LINE-LAND = 'G'.   LINE-NAME   = 'Hans'.
LINE-AGE = 20.    LINE-WEIGHT = '80.00'.
INSERT LINE INTO TABLE ITAB.
LINE-LAND = 'USA'. LINE-NAME   = 'Nancy'.
LINE-AGE = 35.    LINE-WEIGHT = '45.00'.
INSERT LINE INTO TABLE ITAB.
Regards
Sudheer

Device Type to print IR56B

Hi,
What is the device type to be used for generating and printing the IR56B form with Chinese Character?
We are currently using the following device types:ZHANWIN and SAPWIN. However we cannot print the IR56B form completely. The bottom part (I.R.56B) is missing. We cannot change the device type because the form should be printed in one sheet as per client's requirement. And the form should print Chinese Characters. So, is there a note that we should apply to print the IR56B completely or is there other device type that we can use?
Please advise asap.
Thank you,
Claire

Hi Salil,
Thanks for that information. However the issue is when we print the IR56B form, the "I.R.56B" is missing at the bottom line of the form when we use the device types:ZHANWIN and SAPWIN.
But when we use the device type: HPLJ4000, the "I.R.56B" is not missing at the bottom line of the form however the hard copy is being printed into 2 separate sheets and cannot print Chinese characters.
Is there a note or anything that we need to change in the format setting of device types:ZHANWIN and SAPWIN?
Thank you,
Claire

Device type for printer LOCL

Hi everyone,
Do you know a device type for LOCL that will be suitable for all the formats? Our users are using printer LOCL. We Had an issue before that the font of the printout is larger than the usual so we changed the device type. Recently, another user complained because the font of his printout is smaller than the usual. These are two different users with two different types of output devices but both are using printer LOCL. A change in the device type will correct one issue but will raise another. Please help. Thanks.

Dear Sheryl,
Check if you maintained value '__DEFAULT' for Host Printer under Access Method.
Also, Device Class is Standard Printer.
Regards,
Naveen.

Device type for printer types

Hello,
Could you please tell me the device type for these 2 SAP printer types:
HP Color Laserjet CP1515n
Triumph adler DC 2218
I searched for these, but without any success.
Thank you for your help in advance,
Noemi

Hi,
You can refer to the SAP note 8928 and solve your problem.
Good luck
Tao

Device Type to print Vietnamese Characters

Hi Gurus,
I can print Vietnamese characters in a laser printer using the device type SWINCF and Access Method F (Frontend printing).
Now I want to print using Access Method U (Print using Berkeley Protocol) in a network printer (located overseas). I am using a unicode device type ZHPUTF8F because our SAP system is running under Unicode (ECC 6.0). Unfortunately the printout for the Vietnamese characters are wrong (garbage characters). Is it possible to print Vietnamese characters using a device type other than SWINCF? The printer model that I am testing with is HPLJ 4250.
One more thing, we will be needing to print using a dot matrix printer. Is there a specific device type that can print Vietnamese characters for dot matrix printer (e.g. Printronix)?
Thanks,
Andre

Hi Andre,
did you check SAP note 750219 that all listed prerequisites are met ?
Regarding other printers and Unicode support, please have a look at:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1015a496-94d5-2b10-3c8e-845ff55480c0
or apply SAP note 1036961.
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Mar 19, 2010 5:09 PM

Search device Type for Printer Ricoh Aficio BP20n

Hi does anyone knows a Device type for the printer
Ricoh Aficio BP20n
I looked the sNOTE 8928 which routes me to sNOTE 485240.
but "485240" does not exist.
Notes with device types for Gestetner and Savin are not listening the BP20n printer.
"Savin" is a US subsidiary company from Ricoh.
greets chris

Hi Christian,
That's strange, I could see note 485240: Device types supplied by SAVIN
<a href="https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E">https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E</a>
Symptom
The printer manufacturer SAVIN supplies SAP with the following device types. These device types are produced, maintained and supported by Ricoh.
Should you encounter problems while you are using these device types in SAP, do not direct them to the SAP Support hotline. Instead, use the support addresses of the SAVIN Corporation listed below.
Other terms
Device type, SAVIN
Reason and Prerequisites
Detailed information on the SAP device types supplied by the printer manufacturer SAVIN.
Solution
The following products are supported by the SAVIN device types:
Multi-functional Devices
- 4015/4018/4018d
- 8016/8020/8020d
- 9922DP/9927DP *1
- 2522/2527
- 4022/4027
- 8025/8030
- 8025e/8030e *2
- 9935D/9935DP/2035DP/9945DP/2045DP *1
- 2535/2235/2545/2245
- 4035/4135g/4045/4145g
- 4035e/4135eG/4045e/4145eG
- 8035/8045
- 8035e/8035eg/8045e/8045eg *2
- 2055DP/2070DP Type700
- 2555
- 2560/2575
- 4051/4060/4075
- 8055/8065/8075 *2
- 2085DP/2105DP Type850
- 2585/25105 Type850
- 4090/40105 Type2105
- 8090/8110/8135 *2
- C2408/C2524/C3210/C2532
- C2525/C3030 *2
- C2820/C3224/C3828
- C2410/C3210e
- C2824/C3528/C4535
- C3535/C4540 *2
- C6045/SDC555
Printers
- SLP26/SLP26n
- MLP26/MLP26n
- MLP25/MLP25n
- MLP28/MLP28n
- SLP32
- MLP32/MLP35n
- MLP45
- MLP145 *2
- CLP1620
- CLP22
- CLP1036
- SLP38c
- CLP28
- CLP35
- CLP17
- CLP18
- CLP831
- CLP26DN
- CLP27DN/CLP31DN *2
- MLP75n
- MLP175n *2
- CLP128/CLP135
SAP device types ZA001vvv (Latin-1)/ZA002vvv (Latin-2)
These device types support the above-mentioned printers and multi-functional devices. You can download them from the Internet sites listed under "Support".
Latin-1 (Western Europe) supports the following languages:
English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish
Latin-2 (Eastern Europe) supports the following languages:
Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian
The ZA001vvv/ZA002vvv device types support the following functions:
Input bin / Output bin
Stapling & Hole punching
Paper type
Duplex printing
Job offset
Resolution
Number of Copies & Collation
EconoMode / Toner saving
Auto tray change/switching
Edge enhancement/Smoothing
Paper size
Orientation
Character set / Symbol set
Color printing
Slip sheet
Edge-to-edge mode
*1: Does not support bar code printing and OCR typefaces.
*2: Supports Unicode printing.
For more information, download the customer documentation from the Internet sites listed under "Support".
Support:
Telephone: 1-800-RICOH(74264)-38
Internet: http://www.savin.com/
Download: http://www.savin.com/savin/savin_com.nsf/SupportDrivers/

HT204135 I have two Epson printers and one Canon printer. Why am I unable to access the same print options on my MacBook Pro as I could on mp PC i.e. select paper type and print quality?

I have just purchased a MacBook Pro as my PC has finaly died.
I have three Inkjet printers i.e. Epson Photo PX700W Epson Photo R340 and a Canon Pixma ip4600 which I connected to my Mac and the print drivers were automatically downloaded. Now when I print using any of the printers the functionality PC i.e. Choice of paper and print quality settings. Is this all I get when using the Mac OS lion or should the functionality be on a par with Windows?

Depending on the application you are printing from, you may need to press the Show Details button in the print dialog to see all of the additional driver menus.
The image below is for the extended print dialog of TextEdit and for a Canon MP990 printer. The Show Details button is on the bottom of the print dialog and will change to Hide Details when selected. And with the menu changed to Quality & Media, you have paper options and print quality settings.

Attach a custom content type and set as default for picture library using client object model

Hi,
How to associate custom content type to a picture libraray and set it as default using the client object model?
Thanks

Hello,
Here you go:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b1de0697-0006-4f89-8909-1b94aa18ad89/how-to-reorder-content-types-in-list-with-client-context
http://www.niteenbadgujar.com/2013/05/change-default-content-type.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Font Size in preview and printed web pages

Hi: I have had a long running problem that annoys me. ever since I purchased a 20inch LCD and changed my display to 1680x1050, web pages that I print appear very small. the same thing happens if I go through preview. Word documents do not have this problem; the font size there appears normal and is easily read.
Is there a solution to this?

There is a way to increase the default 72 DPI rez that saving a PDF uses, if your interested I'l try to find it.
Nevermind, found it...
To save PDFs in better resolution from Preview, try these Quartz Filters courtesy Jerome Colas...
http://discussions.apple.com/thread.jspa?messageID=6250289&#6250289

Reverse Type and Print Text as Black

I made a black box and on another layer I made the type "white" by choosing "paper". On screen it looked correct.
Then I did a preflight and chose "print text as black" because I thought the text in the rest of the doc looked better with that choice.
Problem: After printing, the text in the box came out black instead of white. What should I have done? I am using InDesign CS5 on Windows.

That’s what you asked for, isn’t it? Text as black means all of the text, not just some of it.
Now, before you get horribly frustrated I suggest taking a step back in your move to InDesign.
First, buy this book: http://amzn.to/ORQqtT ; Sandee Cohen’s Visual Quick Start Guide is the best beginner book on the market. It’s the best $20 you’ll ever spend.
Secondly, check out the video training on Lynda.com. Here’s a link for a one week free trial: http://bit.ly/fcGpiI
Bob

Output type and print program

Hi All ,
How to find the print program and output types used by a particular t-code.
Thanks in advance
vinay

Hi Vinay,
Generally all the print programs and output types can be referred in Tcode NACE.
In NACE all the Print Programs and Output types are stored according to there Application.
_Application_         _Description_
CF                     Error Control
CV                     Document Management
E1                     Inbound Delivery
EA                     Purchasing RFQ
EF                     Purchase Order
EL                     Purch. SchAgrRelease
V1                     Sales
V2                     Shipping
V3                     Billing
V5                     Groups
V6                     Handling Units
V7                     Transport
For each Application u have output types.
For an example let u see for Purchase Order (EF)
In NACE Select EF..........Purchase Order. Now click on Output types Push Button on the Application tool bar.
Now u can see all the output types related to that Application.
Output type   Name
AUFB           Dunning Ord Confirm
ERIN           Reminder
MAHN           Dunning
MAIL           New PO printout
NEU           New PO printout
NEUS           New PO printout
Now Select output type NEU.....New PO printout and Double click on Processing Routines . Here u can see the MEDIUM, FORM, PROGRAM, FORM ROUTINE.
reward if helpful
raam

OSA: fonts in offline layout and print layout

All:
For Objective Setting and Appraisals we have our appraisal templates set up and the download function working. When we print the document using the "standard" template the fonts are too large for the space allowed for them, and are thus cut off.
We have the same problem with the offline layout in which the document can be completed and uploaded; the fonts are cut off since they are too large.
Does anyone know how to address this problem? Is there a setting I'm missing? Are there other layouts than the default? Can you create your own layout?
Thank you,
Jerry

We found that OSS Note 1372480 will fix this, in case anyone else has this problem.

URGENT: Smartform - Attaching Font to Device Type and Printing

Similar Messages

Maybe you are looking for