Urgent ..... Some GP processes are not coming to UWL

hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
Pls help me it is urgently needed
With regards
Shanto Aloor

Hi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful.

Similar Messages

Not Urgent ..... Some GP processes are not coming to UWL

hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
<removed by moderator - please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] - they explain why you should not post"urgent" in here>
With regards
Shanto Aloor
Edited by: Mike Pokraka on Jul 14, 2008 6:52 PM

Hi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful.

GP Work Items are not coming in UWL after refresh the cache.

Hi All,
We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
Any Idea.??
Thanks
Dheerendra

Hi Dheerendra,
Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
Also check whether the GPWorkItemProvider Web Service is working.
Regards,
Ajay

Tasks are coming but Notifications are not coming to UWL

Hi,
I'm able to see the workflow tasks in UWL but the documents from inbox are not displayed in notifications tab in UWL. Is there any configuration required for this.
Thanks
Swamy

Hi Swamy,
Check below thread's.
/thread/101970 [original link is broken]
/thread/1134072 [original link is broken]
Also do a search in SDN. This issue has been discussed many times.
Thanks,
Viji.

Business Process Graphics are not coming in SOLMAN 3.2

Hi,
In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
The link is as follows...
http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
&_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
6FDB14188B4313543C5393E
I have checked sap-bc-solman-defaultuser-graphicdata is activated.
Please suggest.
Thanks & Regards
Mrutyunjay

hI,
Go to vtlf copy controls in item data vbrk/vbrp give 001 try this it my work out.
Best regards,
venkataswamy.y

Some Unit Price are not displayed on BOMs.

Some Unit Prices are not coming up on BOMs. If you click on the Price List drop down on the row and simply select the price list again then the price shows up.
I reproduced this on demo database PL15 + PL16.
Production > Bill of materials
Unit Price is empty for one of the items on the BOM
Select u2018Base priceu2019 again from list (on row)
Price populates
Logged in user is a superuser
Tools > change log > No changes since 2009
Any ideas what could be causing this? I did not find any relevant SAP note.
The client noticed it after upgrade to PL16

Hi Gordon,
I can manually refresh by choosing the price list again on the rows, then on the header and hit Update (Last Purchase Proce doesn't have the arrow at the bottom to click on to refresh). This solves the problem for now but for the long-term we want to find out why this occurred and how to prevent it happening again. Before upgrade, the customer did not have to manually refresh. Do you think it can be a bug?
Thanks

Excise duty are not coming in utilization

Dear All,
Some excise invoices are not coming in utilization (J2IUN), what possible reaosn is there and how I can
resolve this. Plz advice.
regards,
SP Shukla.

Hi
In J1IS transaction code first give all details like
1) Ref document type
2) Doc Number
3) Doc Year
4)Series Group
5) Excise Group
6) vendor or customer press enter
then click on insert line (shift +F6) fill all the fields now .
Thanx

The prices are not coming automatically

Hi gurus,
In batch determination. When i am creating a sales order the batch number is coming automatically. But the thing is the prices are not coming automatically. what could be the reason. Even though i maintained the prices conditon records in vch1 but the system not picking up automatically. Please give the solution. It is urgent
Thanks & Regards
cheers

Hi,
Batch valuation is possible with the std functionality.
It will allow to valuate each batch saperately.
More information,
http://help.sap.com/saphelp_46c/helpdata/en/61/969838e914a20de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Valuation for a Single Batch
Use
You use valuation for a single batch if you want to separate costs for externally processed batches from costs for internally processed batches, and if you want to keep the price and value of each individual batch in inventory management on a value basis.
Integration
Valuation for a single batch is carried out using separate values, just as partial stocks for a material are distinguished according to origin, for example. In valuation for a single batch, a separate characteristic category is created for each batch (batch number = characteristic category).
Valuation for a single batch is a special kind of valuation type for batches.
Prerequisites :To work with valuation for a single batch, you must choose valuation for a single batch (indicator X in the standard system) as substance characteristic type in the material master record.
regards,
Siddharth.

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

Why last 4 lines of every page in sap script are not coming ,it is not o

pls give some solution why last 4 lines of every page in sap script are not coming ,it is not over flowing to next page even? it is any page format related problem or coding problem?

Hi,
Use PROTECT ENDPROTECT statement it displays hole paragraph in to the single page and also to over come this issue.
Regards
Md.MahaboobKhan

BPEL Processes are not showing in BPEL Console after OPMN restart

Hi All,
BPEL Processes are not showing in BPEL Console after OPMN restart. It was showing earlier before restart.
Can some one help on this?
Thanks

Vikky,
Are you using 10g?
If BPELConsole is up but you don't see any process, you can go to the log files and see what is the problem.
It might relates to permissions, or DB issues etc....
Arik

Tables are not coming to oracle model from sqlserver 2000 while using OMWB

Hi,
I am using oracle migration workbench to migrate SQL Server 2000 to oracle 9i. When �capture source database and create the oracle model� is run. only tablespace and users coming to Oracle model from sql server. Table are not coming. These table are owned by dbo in sql server and
All other users in the database has full privilege on this tables. Do I need to some setup to get this tables
In oracle model.
Thanks
Harish

Try the following
|| This script sets the "dbo" to have the "sa" login.
|| NOTE: Server settings for the SQL Server instance must be set to
||"Allow modifications to be made directly to the system catalogs".
|| This is found under Server Setttings tab for server properties.
UPDATE sysusers
SET sid = (SELECT sid FROM master..sysxlogins WHERE name = 'sa')
WHERE name = 'dbo'

Urgent ..... Some GP processes are not coming to UWL

Similar Messages

Maybe you are looking for