Urgent !!!! Spau List : Note Corrections

Hi,
we are upgrading the system and needs to clear the spau list. there is a huge list. I implemented few of this. But i am not able to implement the remaining.¨I see two types of errors.
1. "Format of correction instructions XXXX XXXXXX XXXXXXXX ; unable to
read corr. instruct."
2. And other issue is i get a green question mark for some notes.
NOw dont know how to clear this. can somebody help me in this.
Apart from Note correction there are also list in With Modification Assistant and Without Modification Assistant.
My second query is can ignore the above note errors and move ahead with With Modification Assistant list. Or i need to clear all Note correction and then proceed with With Modification Assistant & Without Modification Assistant.
Please help and guide me.
Thnaks....

Hi,
Can you give the solution as to how u fixed it and answer the Questions which u have asked yourself pls...
Regards

Similar Messages

How to remove obsolete oss note from SPAU List

Dear All,
How to remove obsolete oss note from SPAU List. Bocz it having yellow trafic Signal and it is not allowing me to reset to orginal or adopt.
Please tell me how to reolve this problem.

Hi,
Please mention the Netweaver release of your system.
Next, if you mention the note is obsolete - the traffic light should be grey.
If its yellow, that means semi-automatic adjustment needs to be made.
If you click on the obsolete greyed out note, you get a message saying the note correction was delivered with upgrade or support package and it could be reset.
If you click on the yellow note, the system would try to reapply the note via SNOTE.
Please try either or the above and let us know the system response.
Regards,
Srikishan

Spau Adjustment with Note Corrections

Hi All,
I am working with SPAU for the forst time, I ran SPAU and under the Note Corrections I found one note with a status of "Yellow color traingle ". When I clicked on this it asked me if I want to change the user on this note and I clicked it yes.... and after that it implemented the note and it went away from the note corrections list under SPAU. So my concern is if this is the right way of doing it or do I need to do something else.
Also I looked for all the notes in SPAU with Yellow lightes and then I looked out for these in SNOTE and found that few of them have the status "can be implemented", some have "incompletely implemented". So i am just wondering what do I need to do in such case.
Thanks,
Raj
Edited by: rajatg on Aug 28, 2009 5:51 PM

@rajatg
Yellow status means "SAP says the note is applicable for your system, but I cannot apply everything automatically. There are something you need to apply manually"
SAP Help says
"The system might display note corrections with a yellow traffic light symbol during modification adjustment (transaction SPAU). The correction implemented previously based on a note was overwritten by a Support Package that does not contain these corrections. Note implementation is restarted if you click the yellow traffic light. "
So basically yellow means the note is okay for your system but something is wrong with corrections/modifications. I recommend you look the note in OSS and corrections and compare each correction object after applying the note in SPAU. So you might find somethings should be done manually.
Eventhough yellow notes can be applicable, you can look the note in OSS, then decide not to apply it based on SAP version, support package. So you can choose "Reset to Original" option from toolbar or right click.
One more thing is important to remember when the notes are applied in SPAU, you have a SAP Net (OSS) connections from your system, so SPAU can check the latest version of the note.

Note correction in SPAU

Hi ,
I need an help from u... pls can u tell about note correction in SPAU...
wt r its benefits and scope on note correction...
am new to this field so can u explain?

hi,
You can implement the correction instructions that are contained in an SAP Note. If you have modified the objects that you need to correct, you can adjust the corrections to your modifications.
Procedure
     To implement the correction instructions in an SAP Note in your system, select the note on the initial screen of Note Assistant and choose Implement Note.
The system first checks which correction instructions in the SAP Note correspond to your system release and Support Package level.
The system also checks whether you need to have implemented corrections from any other SAP Notes as a prerequisite for implementing the current correction. If this is the case, the system displays the SAP Notes in question in a dialog box.
     If you have an RFC connection to SAP, you can automatically download these SAP Notes by confirming the dialog box.
     If this is not the case, load the prerequisite SAP Notes from the SAP Service Marketplace and use the Note Assistant to upload them.
If these SAP Notes are relevant for your system and have to be implemented as prerequisites, they will be listed in the order in which they need to be implemented. (See also: SAP Note Queue). If the prerequisite SAP Notes are not relevant (because they have already been implemented by way of a Support Package, for example) and therefore do not need to be implemented, Note Assistant will automatically assign the corresponding status and will not display the respective SAP Notes in the list. You can find these SAP Notes by calling the Note Browser and selecting according to the processing status Not relevant.
If possible, the system will implement all prerequisite corrections in one single step.
Before the system corrects the objects, it displays a dialog box for selecting the change request.
    Select a suitable change request, or create a new one.
The SAP Note (R3TR NOTE) is entered in this request, together with all the correction instructions (R3TR CINS) and all modified objects, . You can use this request to transport the corrections into other follow-on systems.
Note that all the objects that you want to correct must be entered in the same request as the SAP Note data. This is the only way to make sure that the corrections are made in full in the follow-on systems.
A dialog box appears listing all the objects that you want to modify.
A traffic light symbol indicates whether or not the system can implement the correction automatically. (See Confirming Correction Implementation).
Clicking the name of the object takes you to the Changes Display, which shows you all of the changes.
If you have previously modified the source texts that you want to correct, the SAP Note is flagged with a yellow icon. You can adjust the corrections to your modifications. See Splitscreen Editor.
This type of adjustment is not possible for non-source text type repository objects or subobjects. You must perform any adjustments that may be required in the relevant object editor, either before or after the Note implementation.
If you make manual changes when you implement SAP Notes, the system cannot tell whether these corrections have been implemented correctly. For this reason, you must confirm in an additional dialog box that the corrections have been implemented in full.
If the system cannot implement a correction automatically, although you have not modified the relevant objects, first try to implement the SAP Note by using the split-screen editor. If automatic implementation fails, this is usually due to minor discrepancies in the source code.
If you still cannot implement the SAP Note, it probably contains errors. If this is the case, contact SAP Support. To do this, create a problem message and assign it to the component for the SAP Note (FI-AR-CR, for example).
When you confirm the dialog box containing the list of repository objects to be corrected, the system initially saves the modified objects in the database as inactive versions only. In the dialog step that follows, the system then asks you to activate the modified objects. The corrections only take effect in your system after you have performed this activation.
As part of this activation procedure, the system checks the syntax of the modified objects. If an error is found, the system cancels activation. Syntax errors of this kind can be caused either by modifications or by errors in the Note. If the latter applies, contact SAP Support.
Note that the system can only automatically implement changes made to certain object types. (See Technical Details on Correction Instructions)
If other changes are necessary (for example, to ABAP Dictionary objects), these are described in the text of the SAP Note. You need to implement these changes in the system manually.
        After you have implemented the corrections, test the function that contained the error and check whether the original problem has now been solved.
You can display all the objects that have been corrected by the SAP Note. To do this, choose Corrected Objects. The modification browser appears.
       Set the processing status to Completed.
In exceptional cases you can remove implemented correction instructions. The changes that you implemented are then reset. The SAP Note remains in your system and is reset to the status that it had before you implemented it.
To do this, choose Reset SAP Note Implementation.
       If you have successfully solved your problem by implementing the SAP Note, release the change request that was created when you implemented the correction instructions.
This transports the corrections and SAP Note data into the follow-on systems in your system landscape.
In spau,
all modified objects can be further edited using the Object -> Change function. This does, however, not apply to modifications made with the Modification Assistant and to objects in note corrections which have not yet been adjusted. In these cases, you must first perform the release upgrade adjustment.
Hope this is helpful, Do reward.
Edited by: Runal Singh on Jan 23, 2008 6:27 PM

Performing SPAU after upgrade - Obsolete Note Correction

Hi all,
do we have to reset all those obselete note correction in SPAU after technical upgrade? What are the impact if we do nothing to those obselete note correction?
thanks

Hi Valerio,
As we know, all modification of SAP standard will be overwrittten by Upgrade new standard objects. Those objects that have been overwritten will be listed in transaction SPAU and SPDD. So, we have to decide either to RESET or ADOPT MODIFICATION or do nothing.
The following are the impacts for each action:
1. RESET - Object will be reset to original SAP. Once reset, some field value in SMODIFLOG table will be changed. Field 'INACTIVE' value in the table will be set to 'R' meaning RESET. Impact - this object wont be listed again in SPAU or SPDD list in next SP upgrade or version upgrade.
2. ADOPT MODIFICATION - Modification in previous version will be adopted into new objects. Field 'INACTIVE' value will be set to blank meaning that the object is a modification or note correction.
3. Do nothing - the objects or note correction will appear again in next SP or version upgrade.
Hope that answer your question.

Muse is NOT Working, Illustrator Update FAILS, Apps list is NOT Correct. What Do I Do?

I started having issues with CC a couple months ago out of no where. Mostly just with updates from CC for the apps.
I did the suggested re-installs of CC and then had to try to update by fully re-installing apps and I had funciontality but errors trying to update Illustrator and most of the installed apps did not show up in the CC interface.
Now I try to do a quick update to a site thru Muse and it tells me that it would not validate my subscription and would be canceled in 2 days.
I again followed instructions on Adobe to delete a couple of folders and try to re start Muse.
Now I get an unexpected error and cnont use the program.
I test out CC for updates and the Muse app shows up to date, Bridge app surprisingly updated fine, and as expected, once again, Illustrator errors out on the update and still my CC app list is not correct so I honestly dont know what updates I have to do on the other programs.
I checked my subscription details and everything is fine.
Not having the ability to update efficiently from CC is not a huge deal as long as I can use the programs to work. Not being abel to work because of some programing hiccup is NOT ACCEPTABLE.
Anybody have any possible paths to fix these latest issues?
Should I start by wiping the machine clean of any installs and then completely try to re-install everything?
what a pain.

UPDATE:
I got home tonight and tried to open up Muse.
This time it opened up the login screen and actually made it past the point it errored at previously.
Illustrator update stilll gives an Error 8.

Artist list is not correct.

Artist list is not correct, U2 is in under V and R artists under S etc. I had this problem also in my contact list but this part is solved with 5.1
It starts direct with the A, Anouk is under B. And Bryan Adams under C and so on.
Do anyone now this problem?

On certain iPod models you can choose whether to display a Compilations section in the Main or Music menus. If neither of these are displayed then, regardless of the *Part of a Compilation* settings, all Artists will be displayed in the Artists menu.
The iPhone/iPod Touch do not have such menu options and no longer make use of the *Part of a compilation* flag but instead group albums on the *Album Artist* tag, however the Artists menu still lists all distinct values of the artist field. This can be annoying if, like me, you'd prefer to only have the principle Album Artists displayed and means that an album where there are some guests will not play through properly if selected via the Artist menu.
A (not very good) workaround for when you select an artist and get one track from a compilation album is to switch to landscape mode, touch the cover to flip the album over and then touch any other track to start playing the whole album.
For more info. on compilations and grouping tracks see http://www.samsoft.org.uk/iTunes/grouping.asp
tt2

Check Deposit List - cannot post Processing status not correct

Hi Expert,
I was trying the edit a check deposit list and I encountered error message during save.
"Cannot post. processing status not correct."
Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
How to go to statement/list processing to change to status to 3?
thank you

Hi,
Use T Code FF67,
Select the Check deposit list and click enter. Now go to Settings > Specifications
Here you will find the "Processing Status" for you to continue.
Regards
AKV

I have had two instances of having a downloaded album "scrambled" while playing on appletv, I.e. the track listing remaining correct but having the wrong songs play. Once this has occurred the album does not play correctly. Any help with this issue?

I am having problems with Apple TV scrambling albums while playing from iTunes. The track listing remains correct but the songs play out of order and not all of the songs seem to in place, I.e. a song that played previously under one title will play as a different title. Any thoughts or help? Thanks.

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Refresh or Regenerate SPAU List

H,
I have deleted a Transport Request related to SPAU Adjustment. In SPAU (All those objects with Yellow Lights under W/o Modification Assistant Tree) i reset them to Original and System prompted for a Transport Request. Once the reset is done, I thought i should have used Adopt Modification (Sicne these Objects fall under W/o Modification Request Category). So i deleted the already created Transport Request in this Adjustment. Now i could not see those objects in SPAU list. To add another Transport Request, i have to pick them from SPAU list. But those Objects are not listed now in SPAU list. What should i do to get those objects back in SPAU? Is there any program to be Run to regenerate/Refresh the SPAU List. I hope i have described the issue in more detail. Please let me know if it is not clear. Please let me know your Solutions to this problem. I need your help urgently.
Thanks and Regards,
Kannan.

Hi Peter,
Thansk for your reply. They are listed in the SE95 with New Transports under the Reset Objects Tab. But i have deleted that Transport Request hoping that Deleting the transport Request will show up the Original SPAU List (Before Adopting Modification). So the Reset Objects List has the Invalid Transport request. Is it possible for me to attach other transport request to these Objects.
Thansk and Regards,
Kannan

When using TODATE function MDX query is not correctly generated

Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
When using TODATE function MDX query is not correctly generated.
This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
Here is generated MDX code:
With
set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
select
{ [Accounts].[Trosak kapitala],
[Accounts].[MS1],
[Accounts].[MS2],
[Accounts].[MS3]
} on columns,
NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
from [NISE.NISE]
where ([Segmentacija].[SegmentacijaCustomGroup])
If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

Hi,
Version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
Thanks

Apple ID username, password not correct for imessenger ios 6

i just upgraded to ios 6 on my iphone 4 and imessenger is fine to send and receive but when i go to settings and try to register it with my apple ID i get an error that the username and password are not correct, although i am usung the apple ID fine in app store for example. anyone knows what this is?
also, i was wondering, while setting up my iphone after the upgrade to ios 6, in one of teh steps when i started using the phone, it asked for teh apple ID password to do soemthing related to icloud, imessenger and facetime. it also gave the option on the phone screen to "skip this step" which i did, i skiped the stem and thought if i wanted to i can go back and do it manually from the settings any time. i think it was something related to downloading new features for the icloud. i messenger and facetime.
could this have been the case? but i mean if i had the option to "skip the step" it means that it is not something drastic and can always be done manually later.
anyone has feedback?

Hi again, well I can't answer that question, because my computer IS asking for my apple ID and password to install Rosetta Stone. I would have appreciated you taking the time to help me, if you had had any advice for me. Since I posted this, I have found the answer so I don't need your time anymore, however. I eventually went to my settings and SET a password, which solved the problem. I recently reset my computer and all my records had been wiped- I was unaware that my computer settings had deleted my old password which had been saved on it- not realizing that its data would be seperate from the other numerous places I have used it the past week since I got it back. An answer that would seem like a no-brainer, but since it hadn't needed to be done until then for any other previous installs since the reset, it appeared last on my to-do list.

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Keychain Access: cannot add a new item: user name or passphrase not correct

When trying to add a new item to "Keychain Access", the application suddenly refused to do so. Error message:
Title: An error has occurred. Unable to add an item to the current keychain.
Message: The user name or passphrase you entered is not correct.
I never need a user name neither passphrase to store a new entry in the keychain.
Steps to resolve:
1. Restarting app: no good
2. Repair disk permissions: no improvement
3. Verify disk: no errors found
4. Verfify Keychain First Aid menu from with Keychain.app
Verification started
Checking keychain configuration for User Name (user ID=501)
Home directory is /Users/shortname
Checked login keychain
Checked password for ~/Library/Keychains/login.keychain
Checked settings for ~/Library/Keychains/login.keychain
Settings for ~/Library/Keychains/login.keychain may cause the keychain to be locked
Current values: lockOnSleep=no, autoLock=never
Checked default keychain
Checked keychain search list
Checked contents of ~/Library/Keychains/login.keychain
Checked contents of ~/Library/Keychains/MicrosoftIntermediateCertificates
Verification completed
and a repair:
Repair started
Checking keychain configuration for User Name (user ID=501)
Home directory is /Users/shortname
Checked login keychain
Checked password for ~/Library/Keychains/login.keychain
Checked settings for ~/Library/Keychains/login.keychain
Settings for ~/Library/Keychains/login.keychain may cause the keychain to be locked
Current values: lockOnSleep=no, autoLock=never
Settings corrected on ~/Library/Keychains/login.keychain
Checked default keychain
Checked keychain search list
Checked contents of ~/Library/Keychains/login.keychain
Checked contents of ~/Library/Keychains/MicrosoftIntermediateCertificates
Problems successfully repaired
Repair completed
The First Aid Menu, option repair, solved this problem.
Hopefully by documenting this, this helps another one who experiences the same error, in resolving.

Daniel,
Go ahead and Apply this note , it will fix your issue.
Do you have a third column in AISUSER T.Code .
This issue is fixed in ST : SAPKITL426
Note 1140822 - SAP customer number for installation number &1 unknown
Thanks,
Uday

Tomahawk1.1.3 ugrade exception...ExtensionsFilter not correctly configured.

Hi Experts,
I new to the world of JSF and im presently playing around with MyFaces Tomhawk implementation.
I tried the tree example using tomahawk.jar ,myfaces-api and myfaces-impl.
I was able to get the tree working with these version of jars.
But now when i upgraded to the latest jars i.e
myfaces-api 1.1.3
myfaces-imple1.1.3 and
tomahawk-1.1.3
I'm getting the following error...see the stack trace below:
java.lang.IllegalStateException: ExtensionsFilter not correctly configured. JSF mapping missing. JSF pages not covered. Please see: http://myfaces.apache.org/tomahawk/extensionsFilter.html
org.apache.myfaces.renderkit.html.util.AddResourceFactory.throwExtensionsFilterMissing(AddResourceFactory.java:371)
org.apache.myfaces.renderkit.html.util.AddResourceFactory.checkEnvironment(AddResourceFactory.java:333)
org.apache.myfaces.renderkit.html.util.AddResourceFactory.getInstance(AddResourceFactory.java:288)
org.apache.myfaces.custom.tree2.HtmlTreeRenderer.encodeJavascript(HtmlTreeRenderer.java:611)
org.apache.myfaces.custom.tree2.HtmlTreeRenderer.encodeBegin(HtmlTreeRenderer.java:152)
javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:512)
I googled for this also did the required changes.
here are the links i visited.
1) http://wiki.apache.org/myfaces/Upgrading_to_Tomahawk_1.1.3
2) http://www.mail-archive.com/[email protected]/msg23110.html
3) http://www.mail-archive.com/[email protected]/msg23094.html
Here's my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.PRETTY_HTML</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.AUTO_SCROLL</param-name>
<param-value>true</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>

<listener>
<listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class>
</listener>

<filter>
<filter-name>MyFacesExtensionsFilter</filter-name>
<filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
<init-param>
<param-name>maxFileSize</param-name>
<param-value>20m</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>

<url-pattern>*.jsp</url-pattern>
</filter-mapping>

<filter-mapping>
<filter-name>MyFacesExtensionsFilter</filter-name>
<url-pattern>/faces/myFacesExtensionResource/*</url-pattern>
</filter-mapping>

<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>
Please help me out in fixing this exception.....im sure lot of people must have encountered this exception.
Thanks
Ved

Hi,
I have made some changes and it is now working.But i want it work in a portlet.There it is showing the text box but not the pop up button.It works fine as a stand alone application.How can i resolve this??
My code is as follows...
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="conference-room" version="2.4"
     xmlns="http://java.sun.com/xml/ns/j2ee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>Conference Room</display-name>
     <context-param>
          <param-name>
               org.apache.myfaces.CHECK_EXTENSIONS_FILTER
          </param-name>
          <param-value>false</param-value>
     </context-param>
     <context-param>
          <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
          <param-value>server</param-value>
     </context-param>
     <context-param>
          <param-name>javax.faces.application.CONFIG_FILES</param-name>
          <param-value>/WEB-INF/faces-config.xml</param-value>
     </context-param>
     <context-param>
          <description>
               This parameter tells MyFaces if javascript code should be
               allowed in the rendered HTML output. If javascript is
               allowed, command_link anchors will have javascript code that
               submits the corresponding form. If javascript is not
               allowed, the state saving info and nested parameters will be
               added as url parameters. Default: "true"
          </description>
          <param-name>org.apache.myfaces.ALLOW_JAVASCRIPT</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
          <description>
               This parameter tells MyFaces if javascript code should be
               allowed in the rendered HTML output. If javascript is
               allowed, command_link anchors will have javascript code that
               submits the corresponding form. If javascript is not
               allowed, the state saving info and nested parameters will be
               added as url parameters. Default: "false"
               Setting this param to true should be combined with
               STATE_SAVING_METHOD "server" for best results.
               This is an EXPERIMENTAL feature. You also have to enable the
               detector filter/filter mapping below to get JavaScript
               detection working.
          </description>
          <param-name>org.apache.myfaces.DETECT_JAVASCRIPT</param-name>
          <param-value>false</param-value>
     </context-param>
     <context-param>
          <description>
               If true, rendered HTML code will be formatted, so that it is
               "human readable". i.e. additional line separators and
               whitespace will be written, that do not influence the HTML
               code. Default: "true"
          </description>
          <param-name>org.apache.myfaces.PRETTY_HTML</param-name>
          <param-value>true</param-value>
     </context-param>
     <context-param>
          <description>
               If true, a javascript function will be rendered that is able
               to restore the former vertical scroll on every request.
               Convenient feature if you have pages with long lists and you
               do not want the browser page to always jump to the top if
               you trigger a link or button action that stays on the same
               page. Default: "false"
          </description>
          <param-name>org.apache.myfaces.AUTO_SCROLL</param-name>
          <param-value>true</param-value>
     </context-param>
     
     <filter>
          <filter-name>extensionsFilter</filter-name>
          <filter-class>
               org.apache.myfaces.component.html.util.ExtensionsFilter
          </filter-class>
          <init-param>
               <description>
                    Set the size limit for uploaded files. Format: 10 - 10
                    bytes 10k - 10 KB 10m - 10 MB 1g - 1 GB
               </description>
               <param-name>uploadMaxFileSize</param-name>
               <param-value>100m</param-value>
          </init-param>
          <init-param>
               <description>
                    Set the threshold size - files below this limit are
                    stored in memory, files above this limit are stored on
                    disk.
                    Format: 10 - 10 bytes 10k - 10 KB 10m - 10 MB 1g - 1 GB
               </description>
               <param-name>uploadThresholdSize</param-name>
               <param-value>100k</param-value>
          </init-param>
     </filter>
     
     <filter-mapping>
          <filter-name>extensionsFilter</filter-name>
          <url-pattern>*.jsf</url-pattern>
     </filter-mapping>
     <filter-mapping>
          <filter-name>extensionsFilter</filter-name>
          <url-pattern>/faces/*</url-pattern>
     </filter-mapping>
     
     <listener>
          <listener-class>
               org.apache.myfaces.webapp.StartupServletContextListener
          </listener-class>
     </listener>
     
     <servlet>
          <servlet-name>Faces Servlet</servlet-name>
          <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
          <load-on-startup>1</load-on-startup>
     </servlet>
     
     <servlet>
          <description>
               MVC Servlet for Jetspeed Portlet Applications
          </description>
          <display-name>Jetspeed Container</display-name>
          <servlet-name>JetspeedContainer</servlet-name>
          <servlet-class>
               org.apache.jetspeed.container.JetspeedContainerServlet
          </servlet-class>
          <init-param>
               <param-name>contextName</param-name>
               <param-value>conference-room</param-value>
          </init-param>
          <load-on-startup>0</load-on-startup>
     </servlet>
     
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>JetspeedContainer</servlet-name>
          <url-pattern>/container/*</url-pattern>
     </servlet-mapping>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>
Thanks and regards,
Gaurav Goel.

Urgent !!!! Spau List : Note Corrections

Similar Messages

Maybe you are looking for