URGENT: SRM doubts

hi sir,
i have some doubts in srm5.0 back end settings as shown below...
1) what is VMC& how to activate VMC in SM52?
2) what happend if i change the LOGICAL System for my naming convention in RFC destination?
3) why should we maintain the local RFC within the SRM OWN server for what purpose? EVEN i having a SRM server.
4) is it RFC user is a dialog user?
5) I want to know the T.CODES for each &every menupath. pls tell me the path for that.
my kind request to all can anyone send me solutions as written above questions URGENTLY.my id is [email protected]
WITH REGARDS TO ALL

HI,
ad 1) VMC is Virtual Machine Container for more information - look at link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a1/854ab9451048539e9131f19d3f9ab8/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/df8a715afb1631e10000000a1553f7/frameset.htm
ad 2) Every document created in SRM have a logical system attached to it. If You change it You must populate the changes. (e.g. in transaction BDLS or BDLSS )
ad 3) logical RFC (loopback) must be maintained. This RFC is used to communicate SRM itself.
ad 4) RFC user is a system user.
ad 5) I'm affraid I don't understand the question
Regards,
Marcin Gajewski

Similar Messages

Urgent--- small doubt

Hi
I need some docs for 8i installation on win2K. Also I've a small doubt.... I want to move one database (8.1.7.4) to a new server. On this new server I have to install Oracle 8.1.0...... Now the doubt is if I do backup/restore from the old server, do I still have to apply patch 4 on the new server???
Any input is appreciated.
Regards

Hi,
I suggest you apply the patch becuase the database backup has the version info which is 8.1.4. Thus when you will use the 8.1.0 Oracle kernel to start a 8.1.4 database then it might give an error. It is best suited to apply the patches in the new server the way it is in the old one. Once you have applied the patches in Oracle kernel (Oracle Software) you may go ahead with opening the database.
This will keep the versions of the Oracle kernel and the version info in the database control file in sync.
Regards.

Urgent SRM Queries

Hi SRM Experts,
Where i can get the latest sllaybus and other relevant pointers?
How is the certification exam???? Is it sufficient studying SRM210 or anything required??
Please suggest me. if you have any doccuments other than SRM210 please forward me at my email id - [email protected]
Thanks in Advance
Points will given to all persons giving valid responses.

Reading SRM210 is more than enough.
You are good enough to clear the test as i am seeing your answers and you
seeme to be quiet good in SRM.
I heard that you will get around 50% question as technical one so you are very good in that.
details are mentioned below.
regards,nishant
please reward if this helps.
Software components: SAP Enterprise Buyer 5.0, SAP ECC 5.0
This certification is contained in course TSRM10, and is also offered separately at many SAP locations.
Certification ID (booking code): C_TSRM10_40
Certification duration: 1 hour
Number of certification questions: 40
Required certificates for participation in this certification test: None
Courses for certification preparation: SRM210 / TSRM10 (SAP Enterprise Buyer Configuration)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant Supplier Relationship Management - Procurement with mySAP SRM 4.0 verifies a level of knowledge about the mySAP Supplier Relationship Management solution that fulfills the knowledge requirements for the consultant profile Procurement. This certificate can be used by the candidate as proof that he or she has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
This certification test contains questions from the areas specified below:
Topic areas
1. Enterprise Buyer
 Enterprise Buyer procurement processes
 Enterprise Buyer scenarios
 Roles in Enterprise Buyer
2. Backend Integration Principles (++)
 Enterprise Buyer architecture
 Elements of an e-procurement scenario
 Integration principles
 Integration configuration
 System communication
3. Organization (++)
 Elements and maintenance of an organizational structure
 User administration
4. Workflow (++)
 SAP Business Workflow
 Workflow usage
 Approval options
5. Master Data (++)
 Business partner, product master, product category
 Replication of master data
6. Catalog Management
 Catalog definition and scenarios
 Product catalog, supplier catalog and catalog interfaces (OCI/OPI)
 SAP Catalog Content Management
 Requisite components
7. Self-Service Procurement (+++)
 Shopping cart
 Backend follow-on documents
 Account assignment
 Confirmations
 Invoices
8. Sourcing
 Purchaser roles and processing of purchase orders
 Conditions and contracts
 Sourcing
 Bidding and auctioning
 Vendor list
9. Service Procurement
 Procurement of external services (temporary labor)
 Integration with service procurement in SAP backend system
10. Plan-Driven Procurement
 Plan-driven procurement
11. Administration
 Integration principles
 ITS concept
 Monitoring tools
Amount of questions for each topic (as percentage of entire test):
+ = 1 - 10%
++ = 11 - 20%
+++ = More than 20%

Urgent!doubt in upload the file to a particular directory.

Hi
Actually i'm developing a site using JSP.
Main concept of the project is the user should be
able to access his files or dabases from anywhere
in the world thru internet via intranet.
i've placed upload option in my site.
each user should b given a separate directory.
can anyone tell me how to make the user to store
the file in a particular directory(the one alloted to him).
And to view the file, if the user enters the file name
it should open the file in the particular format.
i need the coding since i'm new to jsp.
can anyone help me or refer any site tht can solve
my problem?
thanx in advance.

I'd just answered a similar case. I believe this is what you are looking for;
<%@ page contentType="MIME-Type; Charset=Character-Set" %>
Read up on MIME-Type and Character-Set for info.
Here some exmaple;
By default:
<%@ page contentType="text.html; Charset=ISO-8859-1" %>
Show an MS Excel file;
<%@ page contentType="application/vnd.ms-excel" %>
or
<%
String mimeType = "application/vnd.ms-excel"
response.seContentType(mimeType);
%>
Cheers

URGENT SRM 5.0 ! Updating PO item BBP_PDPSET-IR_IND (flag Invoice expected)

Hello Experts!
I have to create an abap program who allow to update the field BBP_PDPSET-IR_IND (flag Invoice expected) for Purchase Order's items.
Is there a solution without using a violent "UPDATE BBP_PDSET"
Thanks for your replies.

Hi,
I want to create abap program with PO number input on selection-screen.
This program must allow from PO number (header information) to update the field BBP_PDS_PO_ITEM_D-IR_IND (BBP_PDPSET-IR_IND) that is at item level.
Looking for FM for this update.
I try with FM BBP_PO_MEMORY_UPDATE_SINGLE but no result...
Thanks

URGENT: Doubts in SRM5.0

hi sir,
i have some doubts in srm5.0 back end settings as shown below...
1) what is VMC& how to activate VMC in SM52?
2) what happend if i change the LOGICAL System for my naming convention in RFC destination?
3) why should we maintain the local RFC within the SRM OWN server for what purpose? EVEN i having a SRM server.
4) is it RFC user is a dialog user?
5) I want to know the T.CODES for each &every menupath. pls tell me the path for that.
my kind request to all can anyone send me solutions as written above questions URGENTLY.my id is [email protected]
WITH REGARDS TO ALL

Hi
1. For VMC check the link http://help.sap.com/saphelp_nw04s/helpdata/en/a9/26ae3c95164695accbf2483a14281e/frameset.htm
2. Logical system name should be same as RFC destination (recommended by SAP), one reason may be, because for posting of IDocs in the system which will require same naming convention for LS name and RFC destination.
3. I think, The local RFC is for creating the follow-on documents for SC in SRM system.
4. RFC user may be a dialog or a system/communication user. For search helps you can RFC as dialog uer and for other data transfers thru RFC, it should be made as communication/system user.
5. For Tcodes you can look at TSTC table. One alternative to find T-codes for an activity is (only some will work): SPRO - Menu options - Additional Information - Additional Information - Display Key - attributes.
Rgds
Reddy

Urgent: Doubt in coding a logic

Hi Experts,
I have a doubt in coding a logic . The bussiness requirement is that i have to capture a string of alphabets and check for particular alphabet in particular position and then process the rest of the logic.
the logic is given below , can anyone suggest me coding for this logic .Its very urgent . points will be rewarded.
Logic:
If 1st letter is D then
    If 3rd letter of DPVERSION is:
        A --> Asia (like DPA0202)
        C --> EMEA (like DPC0111)
        L --> Latin America LA (like DPL0502)
        N --> North America NA (like DPN0408)
        W --> EMEA (like DPW0207)
        D then
            if 4th letter is:
                A --> Asia (no example yet)
                C --> EMEA (no example yet)
                L --> Latin America LA (no example yet)
                N --> North America NA (like DPDN01TH)
                W --> EMEA (like DPDW09TH)
            End If
      End If
Else if 1st letter is X then:
     If 2nd letter of DPVERSION is:
        A --> Asia (no example yet)
        C --> EMEA (XEHC_RTF)
        L --> Latin America LA (no example yet)
        N --> North America NA (XNFAB_RTF)
        W --> EMEA (no example yet)
    End If
End If
Thanks in advance
Kumaran

Hi, I think you can adopt offset logic.
assign character value to a variable like string+2(3) = char
then use case statement
case char
when 'A'
write ASIA
when--
End case.
Like this u can approach .
Hope this helps
Regards
Pavan

Doubt in ORA_FFI(Its urgent)

Hi,
I've created a test.dll which contains caps func as follows:
int caps()
     int * ptr=0x417;
     if (*ptr==64)
          return 1;
else
return 0;
Then I called this func through ORA_FFI package..
DECLARE
dll_handle ORA_FFI.LIBHANDLETYPE;
winexec_handle ORA_FFI.FUNCHANDLETYPE;
vn_ret PLS_INTEGER;
FUNCTION Runp( handle IN ORA_FFI.FUNCHANDLETYPE)
RETURN PLS_INTEGER;
PRAGMA INTERFACE(C, Runp, 11265);
BEGIN
break;
dll_handle := ORA_FFI.REGISTER_LIBRARY(NULL,'test.dll');
winexec_handle := ORA_FFI.REGISTER_FUNCTION(dll_handle,'caps');
ORA_FFI.REGISTER_RETURN(winexec_handle,ORA_FFI.C_INT);
vn_ret := Runp(winexec_handle);
IF vn_ret = 2 THEN
MESSAGE('Cannot find file ' );
END IF;
EXCEPTION WHEN OTHERS THEN
FOR i IN 1..Tool_Err.NErrors LOOP
message(Tool_Err.Message);
Tool_Err.Pop;
END LOOP;
END;
When I debug this code,It gives error as caps func not found in test.dll.
But the only func in test.dll is caps..
I'm using forms 6i in client server mode.
I created test.dll using Microsoft visual c++ by creating new win32 Dynamic link library.
One more doubt:
How can I find functions in a already compiled DLL?
Pls reply me..Its urgent..
Adios..
Prashanth Deshmukh

Hi,
refer these ,u will get some help
Standard Buttons:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
alv-pfstatus:
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
then how to capture that button click.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_rowsel.htm

Big Doubt.. Help pls.. Urgent.. File to IDoc (Bypass)

File to IDoc scenario( Bypass)-- Error ( Segment is missing) -- urgent pls.
Hi Bhavesh and all,
I done file to idoc scenario (Bypass)
From the above thread i have hardcoded my XML file by inserting BEGIN
and Segment = "1" in each of the new segment.
Since it is a bypass scenario.. when it reach to production , the idoc -xml will come from one of the tool without having these BEGIN and SEGMENT = "1".
Still XI will receive it??
Because my doubt is i harcoded the XML file and finished my developement.
Now iam getting the doubt that once they do testing in QA server..the XI will process it and not ?
Can we able to achieve this even without BEGIN and SEGMENT = "1" ?
or
those fileds are mandatory?
Pls suggest me .. its urgent.
Regards
Seema..

Hi Seema,
>> Can we able to achieve this even without BEGIN and SEGMENT = "1" ?
or
those fileds are mandatory?
To post an idoc to R/3 system this fields are mandatory.
>>From the above thread i have hardcoded my XML file by inserting BEGIN
and Segment = "1" in each of the new segment.
Since it is a bypass scenario.. when it reach to production , the idoc -xml will come from one of the tool without having these BEGIN and SEGMENT = "1".
Still XI will receive it??
As you are just routing it...just XI will poll the file and sends data to the idoc ( as the source and target structure are same).
Regards,
Prasanthi.

Urgent: move the created_by field to preq_name for PR in srm

Hi All ,
I need to move the created_by field into preq_name field when creating Shopping cart in SRM the backend PR will create .
I need it urgently..
Thanks in Advance,
Prashnath.

Hi,
You can try to create a new standard view, then select “created by” and “modified by” column under columns, next apply this view, finally check the effect.
Did you customize the permissions of the list or document library? Did you customize the permission of the item? For example, break the permission inheritance form its parents. If so, try to inherit permission from its parents, after that create a new standard view according to the steps above, then check the effect.
By default, permissions on lists, libraries, folders, items, and documents are inherited from the parent site. However, you can break this inheritance for any securable object at a lower level in the hierarchy by editing the permissions on that securable object (that is, creating a unique permission assignment) . For example, you can edit the permissions for a document library, which breaks the permissions inheritance from the site.
You can also try to create a new document library, then create a new document with user A, after that log into with user B, check the effect.
For more information about SharePoint : page level permissions, please refer to the following article:
SharePoint : page level permissions
http://blogs.msdn.com/brettrobinson/archive/2009/04/24/sharepoint-page-level-permissions.aspx
For more information about control access to sites, please look into the following articles:
About controlling access to sites and site content
http://office.microsoft.com/en-us/sharepointtechnology/HA101001441033.aspx
Permission levels and permissions
http://office.microsoft.com/en-us/sharepointtechnology/HA101001491033.aspx
For more information about how to create a view, please refer to the following article:
Create or change a view
http://office.microsoft.com/en-us/help/HA100215771033.aspx
Hope this helps.
Rock Wang
Rock Wang– MSFT

Doubt using CastorMapping...Urgent.......

hi guys....
i'm new to castor. i have to generate the xml using namespace uri with attribute like..
<pre:MyRequest xmlns:pre="http://...." type="MyList">
<message>
<mymessage/>
</message>
</pre:MyRequest>
code of my castor xml
<class name="ListRequest">
<map-to xml="MyRequest" ns-uri="http:.." ns-prefix="pre" />
<field name="type" type="java.lang.String">
<bind-xml name="type" node="attribute"/>
</field>
<field name="message" type="Wrapper">
<bind-xml name="message" node="element"/>
</field>
</class>
when i run my java coding the xml has generated like as follows..
<pre:MyRequest type="MyList" xmlns:pre="http://...." >
<message>
<mymessage/>
</message>
</pre:MyRequest>
what my doubt is i the attribute of type should be come after the namespace.. how to do this.. plz give me ur valuable suggestion. its need very urgent.
thanx in adv with reg
DJ

hi guys....
i'm new to castor. i have to generate the xml using namespace uri with attribute like..
<pre:MyRequest xmlns:pre="http://...." type="MyList">
<message>
<mymessage/>
</message>
</pre:MyRequest>
code of my castor xml
<class name="ListRequest">
<map-to xml="MyRequest" ns-uri="http:.." ns-prefix="pre" />
<field name="type" type="java.lang.String">
<bind-xml name="type" node="attribute"/>
</field>
<field name="message" type="Wrapper">
<bind-xml name="message" node="element"/>
</field>
</class>
when i run my java coding the xml has generated like as follows..
<pre:MyRequest type="MyList" xmlns:pre="http://...." >
<message>
<mymessage/>
</message>
</pre:MyRequest>
what my doubt is i the attribute of type should be come after the namespace.. how to do this.. plz give me ur valuable suggestion. its need very urgent.
thanx in adv with reg
DJ

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

URGENT- all SRM consultants

Hi All,
I am MM consultant and recently shifted to SRM. Does any one have SRM business process documents (blue print). I may assign new implementation project soon so I m badly need of this document for better understanding of SRM. You can delete all the confidential info in the document.
Please consider this as Urgent matter and help me......
Eagerly waiting for your responsesu2026
Thanks
Swapna

Hi Swapna,
unfortunately we can not provide blue print documents. Distribution, of internal documents, and training materials is against the law.
Please see the following offitial documentations:
- The online help is available at http://help.sap.com -> SAP Business Suite -> SAP Supplier Relationship Mgmt.
- Installation and upgrade information is available at http://service.sap.com/srm-inst
- Integrated Business Content for SRM is available at http://service.sap.com/ibc-srm
- SAP Best Practices are available at http://service.sap.com/bestpractices
Kind regards,
Peter

Questions for SRM Certification - urgent pls.

Hi Gurus,
Could anyone pls help me with SRM questions for certification.
[email protected]
thanks in advance.

Hi gurus,
I have the following questions, can someone pl. help me to clear my doubts ?
1. With EBP 3.0, the classic scenario is replaced with the extended classic scenario.
My question : Is it true ?
2. The Business Connector for exchange of data between EBP and the catalog.
What is Business Connector ? Is Business Connector means XI ?
3. The message types and BAPIs that are defined in the distribution model are later
transferred to the back-end in either synchronous or asynchronous fashion,
according to type.
Since the Model's can ONLY be distributed from EPB to back-end and regened in back-end,
I may come back with more questions, please help me out. .
If anyone have any SRM Certification questions, please pass on to me @ [email protected]
u can count on my points.
Thank you in advance.
regards,
Venkatesh Srinivasan.

Some J2ME midlets doubts!! help needed urgently!!!

Hi,
I am currently working in a company where it does wireless technology like WAP and I am assigned a task of creating a screensaver midlet. I have some doubts on the midlets.
1) How do i use a midlet suites? From what I heard from my colleagues & friends, a servlet is needed for midlets to interact with one another. is it true?
2) How do I get the startin midlet to take note the phone is idling so that the screen saver midlet can be called?
Help needed urgently... if there is any source codes for me to refer to would be better... Thanks...
Leonard

indicates that MIDlet suites are isolated (on purpose) from each other, so you can't write over another one's address space.
Also, I believe (at least on cell phones) that you have to specifically enter the Java Apps mode; unless you do the app won't execute. If you are in Java apps mode and a call comes in, the cell's OS puts the Java app currently executing on "Pause" mode and switches back to phone mode.
Not sure if you will be able to have a Java app do that automatically.
BTW why do you need a screensaver on an LCD display? Is it really intended to show an advertisement?
Download and real all the docs you can from Sun, once you get over the generic Java deficiencies MIDlet's aren't that hard.

URGENT: SRM doubts

Similar Messages

Maybe you are looking for