URGENT! T430 update 16 GB RAM failed resume

I have a T430 2349-h2g and i have updated RAM from 8GB (from lenovo 2x4GB) to 16GB (Crucial CT102464BF160B.C16 1600MHz 2x8GB), after i suspend the system  when i reopen the lid or push the power button it restarts instead resume from sleep. This behaviour is present in Windows 8.1 and Linux Fedora 20, before the RAM update the system worked correctly. I try to check RAM with Lenovo Diagnostic in EFI menu but i obtain this behaviour http://forums.lenovo.com/t5/T400-T500-and-newer-T-​series/Lenovo-system-diagnostic-EFI-T430-memory-si​... please help me, i don't know if RAM is fault or there is a bug in Lenovo BIOS. Has someone a T430 with 16GB of RAM that can confirm me the problem or not?

Hi,
t430 works with 2x8 gb RAM, I know a couple of owners.
BUT Lenovo doesn't mention about low-voltage memory type t430 supports. The memory you've selected for update is low-voltage (1.35 v). Intel claims this memory is supported by i7-3520m your laptop has. But BIOS might restrict using of unsupported memory type. As well as the power laptop gives for 2 high capacity (8 gb each) low-voltage sticks might be not enough. All of these reasons might cause issue you've met.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

Similar Messages

  • Urgent: partail update stoppd: emgr_update_set_post_forge_dims' failed.

    Hi All,
    I can see below exception in the Baseline logs, when i have checked the [ENDECA_CONF]/logs/shell which says "RROR: Failed to set app config. Make sure you can connect to http://server1:8006." however i am able to login to the server1. and also merchandising workbench is working fine on server1. please suggest, this is happening on production server.
    [11.27.12 12:33:51] FINEST: Querying for status of utility emgr_update_set_post_forge_dims
    [11.27.12 12:33:51] SEVERE: Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
    Occurred while executing line 41 of valid BeanShell script:
    38| if (ConfigManager.isWebStudioEnabled()) {
    39| ConfigManager.cleanDirs();
    40| Forge.getPostForgeDimensions();
    41| ConfigManager.updateWsDimensions();
    42| }
    43|
    44| // archive state files, index
    [11.27.12 12:33:51] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
    Caused by java.lang.reflect.InvocationTargetException
    sun.reflect.NativeMethodAccessorImpl invoke0 - null
    Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
    com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
    Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
    com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_set_post_forge_dims' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
    [11.27.12 12:33:51] FINE: Removing flag update_lock
    [11.27.12 12:33:51] INFO: Released lock 'update_lock'.

    Hi,
    Baseline update is running on the same server and also this issue comes into the appconfig.xml, where baseline script is written. Webstudio code is throwing the exception and also when i check the logs i can see the below exception in Catalina.log. This Catalina.log is for workbench,/app/endeca/Workbench/workspace/logs
    27-Nov-2012 13:50:33 org.apache.tomcat.util.http.Parameters processParameters
    WARNING: Parameters: Invalid chunk ignored.
    28-Nov-2012 05:54:30 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet setAppConfig threw exception
    java.lang.OutOfMemoryError: Java heap space
    28-Nov-2012 05:54:30 org.apache.catalina.core.ApplicationContext log
    SEVERE: Web Studio exception_
    I am remove the logs and hope, this will solve the issue.
    Regards,
    Diwaker Kalla

  • Acrobat Updater plug-in fails to install

    I'm running Mac OS 10.4.11 on Mac G5 Quad, 6.5GB RAM, and whenever I run the Adobe Updater for my CS3 programs, I get a dialog box that says, "A new version of the Adobe Updater is available for installation. Click OK to install it now.", so I do, and it downloads and starts to mount a dmg or something, then I get an error message, "Adobe Acrobat Updater plug-in failed to install.", so I never know if it updated the rest of the Suite or not, can't find any info about this. Has anyone found the answer to this? Thanks! :)

    Hi Meisha,
    I have had the same problem for months now and cannot figure out how to solve this. I have seen another discussion with the same topic "Adobe Acrobat updater plug-in failed to install" but am unable to reply to the discussion for some reason. I'm new to using the forum.
    Someone in that discussion (Donald Raymond) posted a command, but I don't understand how to effect the command nor how to reach him to ask him to clarify. The discussion link is here:
    "http://www.adobeforums.com/webx?128@@.3bc4ba94"
    I wish that Adobe would address this issue and give a valid solution. Otherwise, I'm unable to update my CS3 products on Mac OS. I also tried to install a download of a new Adobe update manager, but that didn't solve the issue.
    I hope someone can help us!

  • Thunderbolt Display firmware update 1.2 failed

    Thunderbolt Display firmware update 1.2 fails to complete.  I have made four attempts to load this software update.  The odd thing is that the software list shows that the update has been installed.  But every time I check for updates, Thunderbolt Display firmware 1.2 is listed as a needed update. 

    Strange. The downloaded dmg file package said that the upgrade was successfully installed, but the App Store still says I need to update. I haven't tried it with my MBP cover open but I'll give that a shot.
    Thanks,
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • HT1338 I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    I begin to download mountain lion update and it fail. Then I tried again and icon shows "waiting" but it never begin to download. What can I do?

    RainbowGarner wrote:
    By install i presume you mean add it to the bottom of the machine ?
    Yes, and it's rather easy to do too.
    Your machine has two slots. These are the specs for a 2008 iMac (if your machine is different then check with Crucial.com and they will match the correct RAM for your machine)
    Maximum Memory
    6.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMM
    So all you need to do is visit Crucial.com or OtherWorld Computing to order it, and OtherWorld Computing has install videos.
    Here is one on YouTube. Easy pleasy.
    Just make sure to discharge any static electricity and not touch the contacts, just the plastic edges.
    https://www.youtube.com/watch?v=Fb_B3K1Za5Y

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • Firefox update is constantly failing and is stuck in a loop. I don't know how to bypass this. Help

    When I start firefox, it automatically tries to install an update. This fails and it repeats, getting stuck in a loop which I can not get out of. Consequently, I am unable to open firefox and use the internet on this program. I have clicked ok, closed the dialogue box and ended the program using the task manager. None of these have worked. I prefer using firefox to other browsers but have had to return to internet explorer for the time being.
    Do I need to uninstall and reinstall firefox or is there another option?

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    Do a clean reinstall:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

  • Updating hybrid configuration failed - Kerberos authentication: The network path was not found

    I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
    When I run the Manage Hybrid Configuration, I receive the following error:
    Updating hybrid configuration failed with error
    'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
    path was not found.
    The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
    [1/5/2014 21:21:1] INFO:Opening runspace to
    http://[servername]/powershell?serializationLevel=Full
    [1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
    [1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
    error occured while using Kerberos authentication: The network path was not found. 
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
       at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
       at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
       at System.Management.Automation.Runspaces.RunspacePool.Open()
       at System.Management.Automation.RemoteRunspace.Open()
       at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
       at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
    I have sought help, posting on the forum at community.office365.com -
    http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
    Has anyone else come across this problem running the Hybrid Configuration Wizard?

    Hello Darrell,
    Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
    http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
    looks good.
    As the article states you can run the Exchange BPA and it will check if any of these exist as well.

  • Symbian Anna update 1/2 failed to install

    The story so far. I did the first round Anna update (around 27 mb i think) OTA cos my Ovi Suite never able to update firmware on my n8 since trying to update it to PR 1.2, and I did try reinstalling, redownload, reboot PC, reg clean, ccleaner to fix the Suite but it still do not update my firmware at all. But that's another story.
    So I installed the 1st round, n8 rebooted to white screen, rebooted into homesceen with Midnight theme. SW update then shows 4 more items: Anna update 1/2, 2/2, Store and Social. The 1/2 was showing around 20++ mb. So I selected all 4 and update. Halfway through the installing process of 1/2 update (note the download part of 1/2 was very fast), I did plug in the power pin, cos the installation process was damn slow for 1/2. I did not notice wheher it finised installing cos later i checked it was already on 2/2 (downloaded and installing). It then went to the last two items and installed ok.
    Rebooted device, but SW update still showed Anna update 1/2 available (the only one left) and the download size is now 7166 kb. I proceed to update it, it failes with error but no error codes or any message what was the error about. I tried again and again, with fresh reboots, still failes. What gives?
    Even more, split screen not here. I did the uninstalling Swype, activating qwerty mode in portrait, still no split screen.  I do not have any Betalabs apps.
    My Quickoffice & Reader is not here anymore (the app manager not showing them too). Heck I bought the full ver of Quickoffice 6 last time. Wat a waste of my money now that ver 7 is out!!
    Anyone knows how to delete the "dowloaded cache" of SW updates? I want to force SW update to redownload this 1/2 item to try fix this issue.
    Thanks for listening and please help. Cheers!!
    Solved!
    Go to Solution.

    I got the same problem since this morning on both my N8 & just found out solution on a previous update error similar to this & completed the update on one of the N8. Re-trying on another one.
    Working Solution for failed update was found on Flashism's website quoted & "touched up" per below:
    Big thanks to user “Unick” on Nokia Support Forums, who posted a working solution to the problem, and there are couple of successful installs reported from the solution.
    I just deleted folder E:\Private\20019119\. After that I ran SW update on the phone & it restarted download of Symbian Anna Update 1/2 & 2/2 as well as Social, they  finished updates successfully.
    To delete the mentioned folder, follow these simple steps:
    • Connect your Nokia N8/C7 in Mass Storage mode to PC via USB cable
    • Locate and delete folder named “20019119″ under \Private folder of Mass Storage
    • Unplug the device from PC, and retry again. It should work.
    However, I still got no popup split keyboard after completing the updates & restarted the phone.

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Staroffice 9 to SO9 Update 1 process fails

    I downloaded the StarOffice9 Update 1 patch from sunsolve and followed the directions. I'm on Windows XP SP3. The update to SO9 fails every time with an error message in German. (I have a screen shot but am unsure if I can upload it here?) What I think it is saying is that it is looking for a file called "staroffice9.msi" in order to verify my installation (or something like that). There is no staroffice9.msi file on my computer. Maybe it was created when I installed SO9, but I delete installer files once the installation is complete. The patch update will not complete in any case, so I am stuck. Any suggestions?

    I followed your advice and ran the original SO installer, which created the installation files on my desktop. I then canceled the rest of the installation and ran the patch update program. It worked fine, and now my system is patched to SO9 update 1. Thanks much for the helpful reply.
    I must say, requiring an original .msi installer file in order to validate an update is really dumb. The installer unpacks almost 1/2 GB of files on the user's desktop. Why in the world would I want to keep those files around after my installation is done? Of course I erased them to get them off my desktop and off my disk. Then, 6 months later, I run a patch program which won't run if it can't find the original msi file. That's really not a good idea. If the updater needs to validate something, it should look for the staroffice exe file, which would make perfect sense. Looking for an msi file makes no sense for the reasons I've mentioned plus the fact that it doesn't even prove the program is installed on the system. This should be fixed!

  • Constant failures in setting up scalable wordpress. Update ClearDB database failed.

    I've been having Constant failures in setting up scalable wordpress with no luck on finding a fix. 
    Update ClearDB database failed is the most common issue, with Update deployment being the second issue. I though maybe it had to do with Azure changes over the last few months (beta portal), but have yet to successfully deploy a site. 
    Any suggestions / fixes would be greatly appreciated. 
    Also, i've tried utilizing the support link but it seems to hang perpetually (regardless of browser) when checking my subscription. 

    Hi,
    Two points need confirmed:
    1.Have you already purse the ClearDB database?
    2.What's error did you encounter when you scalable WP site?
    Regards,
    Will 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Infopath 2007 "Updating Site Content Failed"

    I get this error for just about everything I do with the forms we are publishing via Infopath 2007.  I believe it is because our forms have a fair amount of Promoted fields in them (more than 30 each).
    I've seen this article and think that maybe it will alleviate the problem: http://support.microsoft.com/default.aspx/kb/958139
    The problem is the hotifx that this references is not available for public download and when I try to go through the great new Microsoft Support site (piece of absolute ____) I am unable to get a phone number to call, submit an e-mail or anything without giving them a credit card for payment.  I do not intend to pay money to get the right to download or be sent a hotfix.
    Does anyone know if there is a way I can test to verify that I indeed "need" this hotfix before I spend money out of my pocket? 
    The forms I have published to form libraries in MoSS 2007 Enterprise have many promoted fields.  I can create a new content type in the site collection via Infopath if I keep the promoted fields under about 25, however once I publish it I can no longer change the content type (get the "Updating Site Content Failed" message) and have to create a new content type to make changes to any form I have.  As you can imagine this is a problem as I have to constantly change the template url on my libraries and constantly re-link all of the saved forms in the libraries.
    Does anyone have any ideas how to realistically fix this outside of the hotfix?
    I've tried every method I can find on the internet, but nothing seems to work.

    A little more information.  On the server itself I don't show any indication or problem in the Event logs related to this issue.
    However, on the workstation that I am attempting to publish from (Same subnet, local Gigabit Connection) I get 4 MSSOAP Errors:
    Event Type: Error      Event Soruce MSSOAP
    Event Category: Generic   Event ID: 16
    Description: Soap error: Connection Time out
    I get two of those and two of these:
    Event Type: Error   Event Source: MSSOAP
    Event Category: General  Event ID: 16
    Description: Unspecified HTTP error.
    I went into the sharepoint central admin and changed the timeout value (which was 30 seconds) in the infopath forms section to 120 seconds and it hasn't made any difference.
    Edit:  Yes I have tried from multiple workstations.  We don't load office on the server itself or I would try from there as well.

  • An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How reinitialize app?

    An update of iMovie failed with the message "an error has occurred." That message remains posted by iMovie on the Mac App Purchases page. iMovie is now unavailable. It will not start, update, or reinstall from purchases page. How do I reinitialize the app?

    Thank you again. Here's the console messages from trying to open iMovie and then opening the App Store. Clicking on the iMovie icon in App Store purchases and clicking on check for unfinished downloads:
    8/28/14 4:56:26.743 PM Dock[214]: LSOpenFromURLSpec(file:///Applications/iMovie.app/) failed with -10699
    8/28/14 4:56:47.878 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:56:47.879 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:57:50.201 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:57:50.201 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:35.745 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:35.745 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:35.824 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:35.824 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:35.847 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:35.847 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:36.276 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:36.276 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:39.448 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:39.448 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:39.449 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:39.449 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:55.996 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:55.996 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.021 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.022 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.051 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.052 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.342 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.342 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.425 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.425 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.508 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.508 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.518 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.519 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.696 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.696 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.808 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.808 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.826 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.827 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.838 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.839 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.843 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.843 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.857 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.857 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.893 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.894 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.907 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.907 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.923 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.924 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:56.969 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:56.970 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.039 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.039 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.045 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.045 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.145 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.145 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.231 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.231 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.249 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.249 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.293 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.293 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.350 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.350 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.352 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.353 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.400 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.400 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:57.402 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:57.402 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:59.814 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:59.814 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:58:59.932 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:58:59.932 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:00.697 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
    8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
    8/28/14 4:59:00.698 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
    8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
    8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
    8/28/14 4:59:01.352 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
    8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect to 167.8.226.9:80. Code : 60
    8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Caught exception. Code : 60
    8/28/14 4:59:01.402 PM acwebsecagent[127]: Connection : Failed to connect externally. Code : 60
    8/28/14 4:59:26.564 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:26.565 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:26.660 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:26.660 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:26.840 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:26.840 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:26.864 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:26.864 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:26.984 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:26.984 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.069 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.069 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.079 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.079 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.083 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.084 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.385 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.385 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.389 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.390 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.391 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.391 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.411 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.411 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.435 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.436 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.443 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.443 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:27.479 PM acwebsecagent[127]: Connection : Auth key is not provided or is invalid, applying connection failure policy. CMode : 2 TMode : 1
    8/28/14 4:59:27.479 PM acwebsecagent[127]: OnConnectionFailure : Fail Open - Reason = Unable to verify the license key
    8/28/14 4:59:31.036 PM acwebsecagent[127]: License : One or more of the License/Public Key can't be NULL
    8/28/14 4:59:31.036 PM acwebsecagent[127]: SSLExt : Failed to get ScanSafe headers
    8/28/14 4:59:31.036 PM acwebsecagent[127]: DownloadUpdatedConfig : Failed to download updated config. Host hostedconfig.scansafe.net. Code 0x80004005

Maybe you are looking for