Urgent-Technical content Activation

Hi all,
I had a basic question.
I am activating Technical Content in BW.Do we have to activate the datasources in R/3 system and then replicate it in BW.Just like any other datsources?
I was under the assumption that activating the objects related to Technical contetn does not have to deal with R/3 system.As i see the datasources under the Bw system under the source system.
Please correct me if iam wrong?This is an urgent issue,appreciate with any help provided.

Hi sreenivas,
that was a very helpful answer.Now i can say that my doubt has been clarified "if i have to activate DS in R/3 for Technical Content".
But my other question is when i transport it to QA.I have been getting the following logs.
Warnings:
Application component TCT of DataSource 0BWTC_C02 does not exist Etc for each DS.
Errors:
DataSource 0BWTC_C02 does not exist in source system QBWCLNT100 of version A
Mapping between data source 0BWTC_C02 and source system QBWCLNT100 is inconsistent
Field CALDAY will not be delivered from DataSource 0BWTC_C02 in source system QBWCLNT100 Etc
I get a RC 8 on this.I checked the DS 0BWTC_C02 in Dev and it was in active version so saved it and retransported it but the same message.
please advice.
thanks in advance

Similar Messages

Technical content activation for BI STAT and Admin cockpit

Hi friends,
I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
After the implemntation did i need to load data for all infoproviders in quality system.

Hello Suresh,
I am not clear on all your questions.
In general, technical content process chains load data similiar to other BI process chains.
if your system is productive for a longer period already ( > 6 months ), there may be a lot of
BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
Otherwise, it should not affect system performance.
It is better to schedule them daily to avoid huge data loads.
But these are only guidelines. It depends on your need.
You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
Thanks,
Bilal

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

BI 7.0 Technical Content Activation

We have performed the technical upgrade from 3.5 to 7.0 and are in the process of performing the Post Upgrade steps. We are currently updated to level: SAP_BW 7.00 SP15.
One of the Post Upgrade steps referenced in the "How to ... Checklist: Rapid SAP NetWeaver 7.0 BI Technical Upgrade with BI Accelerator Implementation" SAP document references the the activation of BI Technical Content (even if there are no plans to use it). Our problem occurs when we attempt to activate the required Technical Content objects via IMG (TCode SPRO). When the activation reaches the Process Chain activation a couple of the Process Chains reference objects that are not available at our content patch level.
I have researched and understand the workaround discussed in OSS 1134944. My question is more general. Is the activation of the Technical Content absolutley required - even if we have no plans to make use of it initially? If so, can someone please explain why this is the case.

Ramesh,
I understand the purpose and usage of Business Content in BI. As I stated in my thread, the Post Upgrade How To Guide implies that the activation of the Technical Content (a component of BI Business Content) is required in 7.0 - even if there are no plans to use it. Since we are having problems with the activation of the Technical Content my question referred only to its objects. We are trying to understand why (if) this component of the Business Content is actually required as the document implies.
Dan

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

Technical Content Activation failed

Hi guys,
I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_RS_VERSION_NOT_FOUND
Date and Time          23.07.2008 09:38:27
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
      anywhere along
     the call hierarchy.
Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_RSSM_LOADING===============CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
     administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
     caught in
    procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Object   could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
    "IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
     Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
     In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation Failed in BI7

Dear experts,
Basically, I have posted this question in another category but the response is very disappointing. So I though of moving the question to here.
I am using SAPKW70015 i.e. Release 15. I tried to activate Technical Content via SPRO's Activate Technical Content in SAP NetWeaver BI.
However, I am facing with these problems:
1. If I choose only Activate SAPI DataSources, I will get a time out.
2. If I choose only Activate Technical Content, I will get the following error message:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RS_VERSION_NOT_FOUND
Date and Time 23.07.2008 09:38:27
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_VERSION_NOT_FOUND' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSSM_LOADING===============CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_RS_VERSION_NOT_FOUND', was not
caught in
procedure "CHANGE_VARIANT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Object could not be found in version
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_VERSION_NOT_FOUND"
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM00G"
"IF_RSPC_TRANSPORT~KEY_CHANGE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"CHANGE_VARIANT" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can someone help to me solve both problems???Thanks!!

Hi,
Aks your Basis person to look into the dump in tcode ST22. Also you can check in the SAP notes for error message displayed in the dump. There you find the correction notes.
Mostly this problem is related to Service packs.
Regards,
Sreenivas.

Technical Content Activation

Hi
Iam trying to activate technical content from Bus. content are and being unsuccessfull.
Steps i took
    Collected the technical content objects.
    Marked all of the objects to be installed.
    Ran install and nothing happenned.
    Then i tried to simulate the install, it is
        saying Role SAP_BWC_TCONT already exists.
Went back to Info providers sections and deleted all of the already existing series of info cubes from
0BWTC_C02.... C11. Delete the multiprovided C10 too.
assuming that this will clear up the role.
Once again tried the simulation and the same error comes up. Not sure how to to delete the role.
Please let me know how to do this.
Sampath

Hi,
By using T. Code PFCG we can create/ Edit the roles. So you can go to the T.code and choose the role and delete.
Thanks & regards,
Venkata Sharma.

Urgent-Issue with Technical Content.

Hi experts,
we have activated the technical content.Now we are Initilize and run deltas with Process Chain.
Under one of the Infosource loading the datatarget(0BWTC_C02),i have the following standard delivered infopackages
1) Delta - OLAP Transaction Data
2) OLAP Transaction Data Initialization
3) OLAP Transaction Data: Delta Initialization
4) Transaction Data OLAP - Delta
5) Transaction Data OLAP - Delta Initialization
I have checked all these infopackages,i dont see any difference when i tried to compare the selection conditions and datatargets.
Now my question is
1) How do i select which infopackage should be in the process chains?
2) Also do we need to create and delete indexes for the technical content cubes too?
Please advise
thanks in advance
kiran

Hi sunil,
I appreciate your reply.
Issue 1:My question was as i have 5 Standard infopackages with no differences.If you see my first posting.How should i consider which infopackage to choose for in my Process Chain?
Ex: As i see 3 Init Infopackages witht he same name.How should choose which onfopackage to include for the process chain?
Also i see 2 delta infopackages witht almost the similar name.How should i consider which infopackage to include for the process chain.
Issue 2: I do understand that indexes are deleted before loading data for better loading performance and then indexes are created for reporting perfomances.
But my question was do we have to create/delete indexes for Technical content too.What is the recommended solution?What are the Pros and Cons?
Hope i am clear with my questions this time.
thanks in advance
kiran

Activating technical content in BW7.0

Hi,
We are in the process of upgrading BW 3.5 to NW 2004s. We followed OSS note 965386 to activate technical content. We assigned all the required authorization to the user and followed the following path to activate the content:-
SPRO>SAP NW>Business Intelligence>Setting for BI Content>Business Intelligence>BI Admin Cockpit>Activate technical content in SAP NW BI
When we went to SPRO we did not see the last step i.e. Activate technical content in SAP NW BI.
Any help in this regard? Also, why not we can activate the technical content from RSA1.
Regards,
Anil

Its just like installing any other BI content. Just check what are the cubes you would be needing. If you are not sure and want to have latest and greatest, you can stick with the MultiProvider(0BWTC_C10) that is delivered comprising of all the six individual technical content cubes. While installing system would prompt you whether to install the datsources, say yes and provide ur credentials. That would take of activating DS. After installing, replicate the datsources from the source system. You are all set to go.
or alternately run program RSTCC_ACTIVATE_ADMIN_COCKPIT to install all this stuff automatically instead of collecting all the objects in BI content screen.
Message was edited by:
voodi

Activating BI technical content

HI All,
I have installed BI_CONT 706 on Netweaver 702.I nowwant to activate the technical content.Jjust to check how RSA1 looks like,I ran RSA1 and canceled all the further prompts.The status of the job RS_TCO_ACTIVATION is shown as finished.But I guess the job did not run at all as duration of the job in SM37 is 0 sec and the status in RSTCO_ADMIN is activating.I ran RSA1 again.But now the promts for activation of the job and other prompts are not coming up.What can I do now to activate the BI content.
1.Can I re-run the job RS_TCO_ACTIVATION manully like copying the origial job?
2.Run RSTCO_ADMIN and click on install.Will this option activate the BI content?
Please guide me.

Hi Markus,
Thanks for your response.I have found a doc on the following link for the option you have mentioned.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0e5ca3b-95ce-2b10-4d94-864ab29a8b63
As per the page 14 on a bove link,Please confirm the activation of BI_CONT involves the following.
1.Activate the source system.
2.Replicate data sources.
3.Repair missing infopackages
4.Activate technical content.
5.Schedule Init Process chains
Regards,
Dinakar

Activating Technical Content in BI7.0

Hi Experts,
I am trying to activate technical content for BI Statistics and make it work. I have not used RSTCO_ADMIN (we will not need BI Admin Cockpit for now, ST03 would make it at the moment) but went the good old way, activated all the cubes, process chains, etc. from RSA1.
Now everything looks to be more or less OK, except the Process Chains. The problem is that those infopackages in the standard process chains do not exist, and I cannot even find them in the Business Content either. Additionally, 6 of the 7 process chains in transaction RSPC look like "inactive", their names are displayed with grey instead of black. I have to double click on their name and then click on "Display/Change" to make them appear on the right-hand side of the screen.
We are on SAP_BW release 700 SP12, BI_CONT release 703, level 0000. Do you have any idea on why I cannot find those infopackages anywhere in the BI content?
Thanks in advance for any tips,
Csaba

Hi Dhanya,
Thanks for your reply.
When activating the process chain, I have selected all infopackages that were collected automatically by the system (with the option "In the Data Flow Before"). I also tried to find these infopackages myself in the Business Content (in ISIP (Infopackage) object type), still no success.
I also thought I could create these infopackages manually, but I have absolutely no idea on what they are expected to do: loading? From where to where? Activating data? Changing attributes? I don't know.
In RSPC I can see these infopackages as a step in the chain, but only with their technical name which does not help me to find out what is the source and target of that loading.
Cheers,
Csaba

Erro content master data by activating technical content BI

Hi
i activated technical content BI and load th init then the delta , i have one error ( the other errors are solved by activating datasource) that i don't understand :
In the process monitor :
Too many error records - update terminated
Error   4 in the update
In the PSA i can read many messages like this :
There are duplicates of the data record 3 & with the key
'BW2CLNT100DABAP &' for characteristic 0TCTPRCSVAR &.
i don't understand it ? how can i solved it ?
thanks for your help !!
Karima

I had a huge amount of duplicate records so I manually applied the fix in NOTE 1134138.
This fixed the dups, but I had 4 records with probably a hidden char so I manually updated it.
However, my process chain 0TCT_MD_C_FULL_P01 is going to continue to fail every week unless I put some other fix in.
The error message is
"Error               4 in the update"
Anyone see a fix for this?
MIke

Activating technical content

Hello guru's
I want to activate the technical content in BI7 environment.can u advice the procedure to activate.my dought is what is the differeance b/w activationg through SPRO and directly in business content <object types<roles<technical content.

hi,
u can also use tcode - RSORBCT.
RSA1 - BICONTENT
regards,
md zubair sha

BI Technical Content in BI 7.0

Hi Experts,
Could any one help me in installing the BI Technical content in BI 7.0.
Please give me step by step procedure and tell me which are the Infocubes and Multiproviders i need to install.
Thanks,
Mansi.........

Hi,
please go through on below mention steps:
1.     In the administrator workbench, click the Business     Content bar on the left side and then click to set the default source systems.
2. The default source systems are displayed. Click to accept them &       continue. Double click Object Types.
1.     Click     and then select the collect automatically option i.e., BW will collect related objects for the infoproviders to be selected.
       4.   Click     and select the in dataflow before and afterwards             option. Now the infoobject & the object on which the infoobject depends will   be collected and activated together.
        5. Now we will select a Business content object and activate it. Click Select                objects under Infocubes to locate the required infocubes.
       6. Select the required infoobjects and then click
           Now the selected infocubes along with the respective infoobjects will be              transferred for installation.
       7. Click install and then select install to activate the selected infoobject and the              associated objects.
       8. The install in background option can be used when activating a large object.

Urgent-Technical content Activation

Similar Messages

Maybe you are looking for